Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Al2O3-NbC nanopowder incorporation on the mechanical properties of 3Y-TZP/Al2O3-NbC nanocomposites obtained by conventional and spark plasma sintering

  • Salem, Raphael
  • Monteiro, Raphael
  • Gutierrez, Carlos F.
  • Chinelatto, Adriana S.A.
  • Chinelatto, Adilson
  • Ferreira, Julieta
  • Pallone, Eliria
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
[EN] The incorporation of Al2O3-NbC-nanopowder reinforcement in a 3Y-TZP matrix, and its influence on the mechanical properties of 3YTZP/Al2O3-NbC nanocomposites, obtained by conventional and spark plasma sintering (SPS), was investigated. Nanometric powders of Al2O3-NbC were prepared by reactive high-energy milling, deagglomeration, and leaching with acid, and added to the 3Y-TZP matrix, at a proportion of 5 vol%. The final powders were dried under airflow, compacted, and sintered in the temperature range of 1300-1500 degrees C. The effects of the sintering technique and final temperature, on the microstructure and mechanical properties, such as hardness, toughness, and Young's modulus, were analysed. Fracture toughness of the material reinforced with Al2O3-NbC nanopowders, which is one of its most important properties, differed significantly from that of the 3Y-TZP monolith (5.2 MPa m(1/2)). The nanocomposites, sintered conventionally at 1450 degrees C, showed higher fracture toughness (8.7 MPa m(1/2)). Microstructure observations indicated that NbC nanoparticles were dispersed homogeneously within the 3Y-TZP matrix, and limited its grain growth. However, partial oxidation of the NbC on the nanocomposite surface, at the conventional sintering temperature of 1500 degrees C, caused a reduction in the fracture toughness., The authors acknowledge the Brazilian institutions CAPES-PVE (grant number 23038.009604/2013-12), FAPESP (grant number 2015/07319-8), Fundação Araucária (grant number 810/2014), European Union/Erasmus Mundus for doctorate mobility (grant number EB15DM1542), and the Spanish Ministry of Economy and Competitiveness (grant number IJCI-2014-19839).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dry-sliding wear behavior of 3Y-TZP/Al2O3-NbC nanocomposites produced by conventional sintering and spark plasma sintering

  • Salem, Raphael
  • Gutiérrez-González, C.F.
  • Chinelatto, Adilson L.
  • Chinelatto, Adriana S.A.
  • Pallone, Eliria
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
[EN] This work presents the initial results of the dry-sliding wear behavior of 3 mol% yttria-stabilized zirconia reinforced with 5 vol% alumina-niobium carbide (3Y-TZP/5 vol% Al2O3-NbC) nanocomposites sintered by conventional sintering and spark plasma sintering methods in the temperature range of 1350-1450 degrees C. The reinforcement of 3Y-TZP matrix with hard nanoparticles aimed to improve wear strength of the composites. Wear tests were performed by the ball-on-disc method using alumina (Al2O3) and tungsten carbide with 6 wt% cobalt cermet (WC-6%Co) balls as counter-materials, a load of 15 N, a sliding distance of 2000 m, and a sliding speed of 0.1 m/s. Wear behavior was evaluated in terms of wear rate and FE-SEM micrograph analysis of the wear tracks. The nanocomposite sintered at 1450 degrees C by conventional sintering exhibited the least wear when tested with the WC-6%Co ball. Generally, the wear mechanism showed evidence of severe wear regime with both counter-materials., The authors acknowledge the Brazilian institutions CAPES-PVE (grant number 23038.009604/2013-12), FAPESP (grant number 2015/07319-8), Fundação Araucária (grant number 810/2014), European Union/Erasmus Mundus for doctorate mobility (grant number EB15DM1542), and the Spanish Ministry of Economy and Competitiveness (RYC-2016-20915).