Skip to main content

BASES TECNOLOGICAS PARA LA PRODUCCION EFICIENTE DE ENERGIA RENOVABLE MEDIANTE EL USO DE CELDAS DE COMBUSTIBLE AVANZADAS.

ENE2013-42322-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-use paper-based hydrogen fuel cells for point-of-care diagnostic applications

  • Esquivel Bojórquez, Juan Pablo
  • Buser, R.S.
  • Lim, C.W.
  • Domínguez Fernández, Carlota
  • Rojas, Sergio
  • Yager, Paul
  • Sabaté Vizcarra, Neus
This work demonstrates a stand-alone power source that integrates a paper-based hydrogen fuel cell with a customized chemical heater that produces hydrogen in-situ upon the addition of a liquid. The presented approach operates by capillary action and takes advantage of the hydrogen released as a by-product of an exothermic reaction used in point-of-care diagnostics. The paper-based fuel cell produces a maximum power of 25.8 mW (103.2 mW cm−2), which is suitable for powering a diversity of electrical devices such as commercially available digital pregnancy tests and glucometers. While device shape and dimensions can be customized, here it is shown that the fuel cell can be designed in a compact form factor and footprint comparable to a lateral flow test while providing a remarkable power output. This approach holds great promise for powering portable diagnostics, as the generated electric power could enable device functionalities required for advanced assays, such as device timing, actuation, and signal quantification. Part of the same liquid sample that is to be analyzed (urine, saliva, water, etc) could be used to trigger the hydrogen generation and start the fuel cell operation., J.P. Esquivel acknowledges support from Marie Curie International Outgoing Fellowship (APPOCS - GA.328144) within the 7th European Community Framework Programme. J. Buser and P. Yager were supported by a grant from DARPA DSO/BTO--HR0011-11-2-0007, awarded to Yager at the University of Washington. P. Yager was supported in part by funds from the Department of Bioengineering at the University of Washington. S. Rojas acknowledges financial support from project ENE2013-42322R. N. Sabaté would like to thank financial support received from ERC Consolidator Grant (SUPERCELL - GA.648518)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural effects of LaNiO3 as electrocatalyst for the oxygen reduction reaction

  • Retuerto, María
  • González Pereira, Amaru
  • Pérez-Alonso, Francisco
  • Peña Jiménez, Miguel Antonio
  • García Fierro, José Luis
  • Alonso, J. A.
  • Fernández-Díaz, M. T.
  • Pascual, Laura
  • Rojas Muñoz, Sergio
LaNiO perovskite is a promising electrocatalyst for the oxygen reduction reaction (ORR). In this work we study the effects of several key structural and morphological features on the performance of LaNiO perovskites for the ORR. We have prepared a series of LaNiO oxides via soft chemistry and calcined the final materials at different temperatures from 500 to 1000 °C. With the aim of obtaining morphological and structural information relevant to their performance the prepared oxides have been thoroughly characterized by BET, Power Neutron Diffraction (PND), XRD, HRTEM, STEM-HAADF and XPS. We have analysed the effect of extrinsic (surface area and particle size) and intrinsic factors (formation of oxygen vacancies, Ni oxidation states and occupancy of the e levels) on the current densities and specific activity, respectively, of several samples of LaNiO. The catalysts with higher catalytic activity are those in which the perovskite structure is properly formed, but display high surface areas., María Retuerto acknowledges the Juan de la Cierva program of the Spanish Ministry of Economy and Competitiveness for a grant (FPDI-2013-17582). Economic support from projects ENE2013-42322-R from the Spanish Ministry of Economy and Competitiveness, and project 201480E122 from the CSIC are also acknowledged. Project S2013/MAE-2882 is also acknowledged. J. A. Alonso and M. Teresa Fernández-Diaz thank the financial support of the Spanish Ministry of Science and Innovation to the project MAT2013-41099-R. Amaru González acknowledges the SECAT for a grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of N and S co-doping of multiwalled carbon nanotubes for the oxygen reduction

  • Domínguez Fernández, Carlota
  • Pérez-Alonso, Francisco
  • Al-Thabaiti, S. A.
  • Basahel, Sulaiman Nasir
  • Obaid, A. Y.
  • Alyoubi, A. O.
  • Gómez de la Fuente, José Luis
  • Rojas Muñoz, Sergio
The co-incorporation of S and N into multiwalled carbon nanotubes (CNTs) and the effects for the catalytic performance for the oxygen reduction reaction (ORR) in acidic and alkaline electrolytes has been studied. Subjecting CNTs to different ballmilling periods results in the formation of defects in their graphitic structure. Heteroatoms such as N and S can be actually incorporated into such defects leading to active catalysts for the ORR. In fact, the ORR activity in acid and alkaline media increases with the increasing amount of heteroatoms, especially N, actually incorporated in the catalysts. The use of precursors containing both N and S into their structure such as thiourea, results in a higher incorporation of surface N atoms than with similar N-containing precursors. As a consequence the ORR activity of the S/N/CNTs based catalysts is higher than that of N/CNT ones. This promotional effect of the presence of S is more significant when the ORR is measured in alkaline media suggesting that S-incorporation into the carbon matrix could actually play a direct role for the ORR., This project was funded by the Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah, under grant number (D-006-432). The authors, therefore, acknowledge with thanks DSR technical and financial support. Economic support from project ENE2013-42322-R from the Spanish Ministry of Economy and Competitiveness is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Na-doped ruthenium perovskite electrocatalysts with improved oxygen evolution activity and durability in acidic media

  • Retuerto, María
  • Pascual, Laura
  • Calle-Vallejo, Federico
  • Ferrer, Pilar
  • Gianolio, Diego
  • González Pereira, Amaru
  • García Estévez, Álvaro
  • Torrero, Jorge
  • Fernández-Díaz, M. T.
  • Bencok, Peter
  • Peña Jiménez, Miguel Antonio
  • García Fierro, José Luis
  • Rojas Muñoz, Sergio
[EN] The design of active and durable catalysts for the H2O/O2 interconversion is one of the major challenges of electrocatalysis for renewable energy. The oxygen evolution reaction (OER) is catalyzed by SrRuO3 with low potentials (ca. 1.35 VRHE), but the catalyst’s durability is insufficient. Here we show that Na doping enhances both activity and durability in acid media. DFT reveals that whereas SrRuO3 binds reaction intermediates too strongly, Na doping of ~0.125 leads to nearly optimal OER activity. Na doping increases the oxidation state of Ru, thereby displacing positively O p-band and Ru d-band centers, weakening Ru-adsorbate bonds. The enhanced durability of Na-doped perovskites is concomitant with the stabilization of Ru centers with slightly higher oxidation states, higher dissolution potentials, lower surface energy and less distorted RuO6 octahedra. These results illustrate how high OER activity and durability can be simultaneously engineered by chemical doping of perovskites., This work was supported by the ENE2013–42322-R and ENE2016-77055-C3-3-R projects from the Spanish Ministry of Economy and Competitiveness (MINECO). M.R. thanks MINECO’s Juan de la Cierva program for a grant (FPDI-2013-17582). F.C.V. thanks the Spanish MICIU for a Ramón y Cajal research contract (RYC-2015-18996) and financial support through the program “Units of Excellence María de Maeztu” (grant MDM-2017–0767). We thank G. Cibin for useful discussions on XAS data treatment and analysis from experiments on beamline B18 Diamond Light Source. We also thank A. Figueroa for helping with data acquisition on beamline I10 and discussions on data interpretation. We thank Diamond Light Source for access to beamlines B18 and I10 that contributed to the results presented here. We thank D. Arroyo and N. López for ICPOES analyses.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evaluation of polyaniline-Nafion® composite membranes for direct methanol fuel cells durability tests

  • Escudero-Cid, Ricardo
  • Montiel, Manuel
  • Sotomayor, L.
  • Loureiro, B.
  • Fatás, Enrique
  • Ocón, Pilar
8 figures, 2 tables., A Nafion® membrane has been both electrochemically and chemically modified in-situ to incorporate polyaniline (PANi) into its structure. The proposed objective was to decrease the methanol (MeOH) permeability and thus improve the durability of a direct methanol fuel cell device. Permeability and conductivity of the modified membranes were measured using the unmodified Nafion® 117 as a reference. The permeability was determined from the electrochemical oxidation of permeated methanol, and the conductivity was determined via electrochemical impedance spectroscopy. To evaluate the effect of these modifications, the performance of a MeOH/O2 single-cell was measured using different MeOH flows and concentrations. The device durability was evaluated under a constant potential and at different operating times. The power density, p, at high MeOH flows and concentrations was 7 times higher for the PANi-modified membrane than the unmodified Nafion® 117. The durability of the modified membranes containing small amounts of PANi was 2 times higher using low MeOH flows and concentrations, while the power densities were similar. Impedance measurements were performed before and after the long-term durability tests in order to identify the improvements at the different parts of the fuel cell., The authors would like to acknowledge to MICINN for funding the project with reference ENE2013-42322-R and CAM for Project S2013/MAE-2882 (RESTOENE-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance of carbon-supported palladium and palladium-ruthenium catalysts for alkaline membrane direct ethanol fuel cells

  • Carrión-Satorre, S.
  • Montiel, Manuel
  • Escudero Cid, Ricardo
  • García Fierro, José Luis
  • Fatás, E.
  • Ocón, Pilar
The activity of carbon supported palladium-based catalysts towards ethanol oxidation reaction in alkaline medium is investigated. To this end, Pd and PdRu (x = 1, 6, 12) materials are synthesized supported on Vulcan XC72R by a modified impregnation method. These materials are characterized physicochemically and their composition varies between 40 and 50 wt. % of metal content. The mean size of nanoparticles is below 4 nm, and the size of the majority of particles ranges from 2 to 6 nm. The catalytic activity of these samples is also tested in half-cell and alkaline membrane direct ethanol fuel cell (AMDEFC). Lower onset potential and higher oxidation current densities is observed in palladium-rich bimetallic catalysts. By using the prepared samples as anode of AMDEFC and a commercial membrane of polybenzimidazole as solid electrolyte, the maximum power density is observed for PdRu/C, 97 mW cm, almost doubling the value achieved by the catalyst Pd/C (50 mW cm), and above the obtained by commercial PtRu/C catalyst (89 mW cm)., This work has been partially supported by the Spanish Science and Innovation Ministry (MICINN) under project ENE2013-42322-R, by the Madrid Regional Research Council (CAM) under project S2013/MAE-2882 (RESTOENE-2), and by Centro de Estudios de América Latina (UAM-Banco de Santander) under the project CEAL-AL/2015-24. This research has been performed within the Unidad Asociada “Laboratorio de Electrocatálisis y Energía Sostenible” between Departamento de Química Física Aplicada (UAM) and Sustainable Energy and Chemistry Group (ICP-CSIC).