Skip to main content

CELULAS SOLARES DE SILICIO DE ALTA EFICIENCIA Y BAJO COSTE FABRICADAS A BAJA TEMPERATURA

ENE2013-48629-C4-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Microscale characterization of surface recombination at the vicinity of laser-processed regions in c-Si solar cells

  • Roige, A
  • Osso, J.O
  • Martín García, Isidro|||0000-0001-8833-9057
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • López González, Juan Miguel|||0000-0002-5718-5101
  • Alcubilla González, Ramón|||0000-0003-4827-4513
  • Vega, L. F
Laser firing processes have emerged as a technologically feasible approach for the fabrication of local point contacts or local doped regions in advanced high-efficiency crystalline-Si (c-Si) solar cells. In this work, we analyze the local impact induced by the laser pulse on the passivation layers, which are commonly present in advanced c-Si solar cell architectures to reduce surface recombination. We use microphotoluminescence (PL) measurements with a spatial resolution of 7 mu m to evaluate the passivation performance at the surroundings of laser-processed regions (LPRs). In particular, we have studied LPRs performed on SiCx/Al2O3- and Al2O3 passivated c-Si wafers by an infrared (1064 nm) laser. Micro-PL results show that passivation quality of c-Si surface is affected up to about 100 mu m away from the LPR border and that the extension of this damaged zone is correlated with the laser power and to the presence of capping layers. In the final part of the work, the observed decrease in passivation quality is included in an improved 3-D simulation model that gives accurate information about the recombination velocities associated with the studied LPRs., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microscale characterization of surface recombination at the vicinity of laser-processed regions in c-Si solar cells

  • Roige, A
  • Osso, J.O
  • Martín García, Isidro
  • Voz Sánchez, Cristóbal
  • Ortega Villasclaras, Pablo Rafael
  • López González, Juan Miguel
  • Alcubilla González, Ramón
  • Vega, L. F
Laser firing processes have emerged as a technologically feasible approach for the fabrication of local point contacts or local doped regions in advanced high-efficiency crystalline-Si (c-Si) solar cells. In this work, we analyze the local impact induced by the laser pulse on the passivation layers, which are commonly present in advanced c-Si solar cell architectures to reduce surface recombination. We use microphotoluminescence (PL) measurements with a spatial resolution of 7 mu m to evaluate the passivation performance at the surroundings of laser-processed regions (LPRs). In particular, we have studied LPRs performed on SiCx/Al2O3- and Al2O3 passivated c-Si wafers by an infrared (1064 nm) laser. Micro-PL results show that passivation quality of c-Si surface is affected up to about 100 mu m away from the LPR border and that the extension of this damaged zone is correlated with the laser power and to the presence of capping layers. In the final part of the work, the observed decrease in passivation quality is included in an improved 3-D simulation model that gives accurate information about the recombination velocities associated with the studied LPRs., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A prototype reactor for highly selective solar-driven CO2 reduction to synthesis gas using nanosized earth-abundant catalysts and silicon photovoltaics

  • Urbain, Félix|||0000-0001-5423-6818
  • Tang, PengYi|||0000-0002-2306-095X
  • Carretero González, Nina Magali
  • Andreu, Teresa|||0000-0002-2804-4545
  • Gerling, Luis G.
  • Voz Sánchez, Cristóbal
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
The conversion of carbon dioxide (CO) into value-added chemicals and fuels, preferably using renewable energy and earth-abundant materials, is considered a key priority for future energy research. In this work, a bias-free reactor device for the solar-driven conversion of CO to synthesis gas (syngas) has been developed. The integrated fluidic device consists of a cathode made of copper foam coated with low-cost nanosized zinc flakes as catalyst to perform the CO reduction reaction (CORR) to syngas, an adapted silicon heterojunction solar cell structure as photoanode with nickel foam as catalyst to facilitate the oxygen evolution reaction (OER), and a bipolar membrane separating the respective catholyte and anolyte compartments. The membrane allows for the operation of the catholyte and anolyte at different pH values. Stable and tunable hydrogen-to-carbon monoxide (H:CO) ratios between 5 and 0.5 along with high CO Faradaic efficiencies of up to 85% and CO current densities of 39.4 mA cm have been demonstrated. Under photoelectrolysis conditions, the photovoltage of the photoanode was varied between 0.6 V and 2.4 V by connecting up to four heterojunction solar cells in series, and thus reducing the overall cell voltage solely by solar energy utilization. Bias-free operation of the integrated device has been achieved under ambient conditions with active areas for CORR and OER, respectively, of 10 cm. An operation current density of 5.0 mA cm was measured under 100 mW cm illumination of the complete device, which corresponds to a solar-to-syngas conversion efficiency of 4.3%.