Skip to main content

CELULAS SOLARES DE SILICIO CRISTALINO CON CONTACTOS POSTERIORES BASADAS EN EL PROCESADO LASER DE CAPAS DIELECTRICAS

TEC2014-59736-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Microscale characterization of surface recombination at the vicinity of laser-processed regions in c-Si solar cells

  • Roige, A
  • Osso, J.O
  • Martín García, Isidro|||0000-0001-8833-9057
  • Voz Sánchez, Cristóbal|||0000-0002-0320-9606
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • López González, Juan Miguel|||0000-0002-5718-5101
  • Alcubilla González, Ramón|||0000-0003-4827-4513
  • Vega, L. F
Laser firing processes have emerged as a technologically feasible approach for the fabrication of local point contacts or local doped regions in advanced high-efficiency crystalline-Si (c-Si) solar cells. In this work, we analyze the local impact induced by the laser pulse on the passivation layers, which are commonly present in advanced c-Si solar cell architectures to reduce surface recombination. We use microphotoluminescence (PL) measurements with a spatial resolution of 7 mu m to evaluate the passivation performance at the surroundings of laser-processed regions (LPRs). In particular, we have studied LPRs performed on SiCx/Al2O3- and Al2O3 passivated c-Si wafers by an infrared (1064 nm) laser. Micro-PL results show that passivation quality of c-Si surface is affected up to about 100 mu m away from the LPR border and that the extension of this damaged zone is correlated with the laser power and to the presence of capping layers. In the final part of the work, the observed decrease in passivation quality is included in an improved 3-D simulation model that gives accurate information about the recombination velocities associated with the studied LPRs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Capacitance study of a polystyrene nanoparticle capacitor using impedance spectroscopy

  • Véliz Noboa, Bremnen Marino
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
In this study, a metal-insulator-metal capacitor structure is fabricated using polystyrene nanoparticles. Impedance spectroscopy is used to evaluate the performance of this capacitor in which we found a significant magnitude increment in capacitance and loss tangent compared with an equivalent ideal capacitor with continuous polystyrene layer and same geometry. Capacitance values up to 11.7 and loss tangent values up to 387 (at 0.1 Hz) larger than the expected for a continuous polystyrene MIM capacitor are achieved. The capacitor shows a good stable capacitive behaviour in the frequency range from 0.1 Hz to 100 kHz at room temperature, 30 °C, 40 °C and 50 °C without an effective relaxation process. Nyquist, capacitance, loss tangent and normalized powers curves are analysed by modified Randles model. Also, a slight decrease in the capacitance value at 50 °C is observed, which that may be attributed to space charge localized at the nanoparticles interface and that are affected by the temperature changes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

3D simulations of interdigitated back-contacted crystalline silicon solar cells on thin substrates

  • Jin, Chen
  • Martín García, Isidro|||0000-0001-8833-9057
  • Ortega Villasclaras, Pablo Rafael|||0000-0001-6577-614X
  • Calle Martín, Eric
  • Alcubilla González, Ramón|||0000-0003-4827-4513
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Interdigitated back contact technology is a promising candidate to be applied to thin crystalline silicon solar cells because of its simpler one-side interconnection while allowing a more flexible front surface treatment. This work explores the efficiency potential of IBC c-Si solar cells applied to thin c-Si substrates through 3D device simulations. In particular, we explore the impact of substrate thickness and front surface recombination velocity on cell performance with special attention to the different behavior in carrier collection of two different rear-surface doping structures. Firstly, the model is validated by comparing simulation results to a fabricated device on 280¿µm-thick substrates with stripe-like p+ and n+ diffusions. It is revealed that efficiencies of 16–17% are reachable for substrates on the 10–15¿µm range without changing the technology developed for thick ones. Next, the rear doping structure is modified leading to doped regions just under the metal contacts. This type of structure is expected in solar cells where high-temperature diffusions are replaced by point-like laser doped contacts, which is a feasible alternative to be applied to thin substrates. Simulation results show that diffusion length requirements for those locally-doped structures are more demanding due to the reduction of emitter regions. As a result, very well passivated front and rear surfaces are required to maintain short-circuit current densities to reasonable values. Finally, for both structures open-circuit voltage is kept almost constant with reduced thickness, despite the strong reduction in short-circuit current. Simulations show a reduction of dark saturation current density with substrate thinning due to the redistribution of dark current densities that flow parallel to the device surface., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Impedance modeling of silica nanoparticle metal insulator metal capacitors

  • Véliz Noboa, Bremnen Marino
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Orpella García, Alberto|||0000-0003-2726-5861
  • Castañer Muñoz, Luis María|||0000-0002-1988-6468
In this study, we have fabricated metal-insulator-metal (MIM) capacitors where the insulator layer is made of 255¿nm diameter silica nanospheres. The MIM devices have been characterized and modeled by electrochemical impedance spectroscopy (EIS) and charge-discharge transients. Fitting the results with modified Randles models agreed well with three constant phase elements, three leakage resistors, and a Warburg element. According to the results of the fitting of the charge-discharge measurements and of the modified Randles model, values of real capacitances up to thousand times larger than the theoretical capacitance of a similar capacitor with a continuous layer dielectric are found. These unexpected high capacitances seemed to be related to the ability of the nanospheres to trap electric charges due to surface hydroxyl groups that are originated by the adsorption of water molecules, thereby indicating that the environmental humidity plays a role. This has been ascertained by measurements at several temperatures above the ambient and the resulting capacitance decreases as temperatures increases. Furthermore, active and reactive parts of the complex power have been measured showing capacitive or resistive behavior depending on the frequency. These results suggest that this novel MIM device based on nanospheres may be a new baseline technology for supercapacitor technology., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Large area deposition of ordered nanoparticle layers by electrospray

  • Véliz Noboa, Bremnen Marino
  • Bermejo Broto, Sandra|||0000-0003-1660-0273
  • Vives, Jordi
  • Castañer Muñoz, Luis María|||0000-0002-1988-6468
© <2018> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Mass production of ordered nanostructures with enhanced optical properties such as colloidal crystals for applications such as solar cells or organic light emitted diodes demands low-cost and large-scale manufacturing techniques. In order to enlarge the deposition area of colloidal crystals, this paper presents the results of two different approaches that use the electrospray technique. Areas as large as 25¿cm2 have been achieved by using an array of needles, whereas up to 7.5¿cm2 areas were achieved by using an additional focusing electrode placed on the same plane as the needle nozzle. COMSOL simulations have been used as a guide for the set up design. The ordered deposition of the nanoparticles has been assessed by reflectance measurements and SEM/FIB observations., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Microscale characterization of surface recombination at the vicinity of laser-processed regions in c-Si solar cells

  • Roige, A
  • Osso, J.O
  • Martín García, Isidro
  • Voz Sánchez, Cristóbal
  • Ortega Villasclaras, Pablo Rafael
  • López González, Juan Miguel
  • Alcubilla González, Ramón
  • Vega, L. F
Laser firing processes have emerged as a technologically feasible approach for the fabrication of local point contacts or local doped regions in advanced high-efficiency crystalline-Si (c-Si) solar cells. In this work, we analyze the local impact induced by the laser pulse on the passivation layers, which are commonly present in advanced c-Si solar cell architectures to reduce surface recombination. We use microphotoluminescence (PL) measurements with a spatial resolution of 7 mu m to evaluate the passivation performance at the surroundings of laser-processed regions (LPRs). In particular, we have studied LPRs performed on SiCx/Al2O3- and Al2O3 passivated c-Si wafers by an infrared (1064 nm) laser. Micro-PL results show that passivation quality of c-Si surface is affected up to about 100 mu m away from the LPR border and that the extension of this damaged zone is correlated with the laser power and to the presence of capping layers. In the final part of the work, the observed decrease in passivation quality is included in an improved 3-D simulation model that gives accurate information about the recombination velocities associated with the studied LPRs., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

3D simulations of interdigitated back-contacted crystalline silicon solar cells on thin substrates

  • Jin, Chen
  • Martín García, Isidro
  • Ortega Villasclaras, Pablo Rafael
  • Calle Martín, Eric
  • Alcubilla González, Ramón
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Interdigitated back contact technology is a promising candidate to be applied to thin crystalline silicon solar cells because of its simpler one-side interconnection while allowing a more flexible front surface treatment. This work explores the efficiency potential of IBC c-Si solar cells applied to thin c-Si substrates through 3D device simulations. In particular, we explore the impact of substrate thickness and front surface recombination velocity on cell performance with special attention to the different behavior in carrier collection of two different rear-surface doping structures. Firstly, the model is validated by comparing simulation results to a fabricated device on 280¿µm-thick substrates with stripe-like p+ and n+ diffusions. It is revealed that efficiencies of 16–17% are reachable for substrates on the 10–15¿µm range without changing the technology developed for thick ones. Next, the rear doping structure is modified leading to doped regions just under the metal contacts. This type of structure is expected in solar cells where high-temperature diffusions are replaced by point-like laser doped contacts, which is a feasible alternative to be applied to thin substrates. Simulation results show that diffusion length requirements for those locally-doped structures are more demanding due to the reduction of emitter regions. As a result, very well passivated front and rear surfaces are required to maintain short-circuit current densities to reasonable values. Finally, for both structures open-circuit voltage is kept almost constant with reduced thickness, despite the strong reduction in short-circuit current. Simulations show a reduction of dark saturation current density with substrate thinning due to the redistribution of dark current densities that flow parallel to the device surface., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Large area deposition of ordered nanoparticle layers by electrospray

  • Véliz Noboa, Bremnen Marino
  • Bermejo Broto, Sandra
  • Vives, Jordi
  • Castañer Muñoz, Luis María
© <2018> Elsevier. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Mass production of ordered nanostructures with enhanced optical properties such as colloidal crystals for applications such as solar cells or organic light emitted diodes demands low-cost and large-scale manufacturing techniques. In order to enlarge the deposition area of colloidal crystals, this paper presents the results of two different approaches that use the electrospray technique. Areas as large as 25¿cm2 have been achieved by using an array of needles, whereas up to 7.5¿cm2 areas were achieved by using an additional focusing electrode placed on the same plane as the needle nozzle. COMSOL simulations have been used as a guide for the set up design. The ordered deposition of the nanoparticles has been assessed by reflectance measurements and SEM/FIB observations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Impedance modeling of silica nanoparticle metal insulator metal capacitors

  • Véliz Noboa, Bremnen Marino
  • Bermejo Broto, Sandra
  • Orpella García, Alberto
  • Castañer Muñoz, Luis María
In this study, we have fabricated metal-insulator-metal (MIM) capacitors where the insulator layer is made of 255¿nm diameter silica nanospheres. The MIM devices have been characterized and modeled by electrochemical impedance spectroscopy (EIS) and charge-discharge transients. Fitting the results with modified Randles models agreed well with three constant phase elements, three leakage resistors, and a Warburg element. According to the results of the fitting of the charge-discharge measurements and of the modified Randles model, values of real capacitances up to thousand times larger than the theoretical capacitance of a similar capacitor with a continuous layer dielectric are found. These unexpected high capacitances seemed to be related to the ability of the nanospheres to trap electric charges due to surface hydroxyl groups that are originated by the adsorption of water molecules, thereby indicating that the environmental humidity plays a role. This has been ascertained by measurements at several temperatures above the ambient and the resulting capacitance decreases as temperatures increases. Furthermore, active and reactive parts of the complex power have been measured showing capacitive or resistive behavior depending on the frequency. These results suggest that this novel MIM device based on nanospheres may be a new baseline technology for supercapacitor technology., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Capacitance study of a polystyrene nanoparticle capacitor using impedance spectroscopy

  • Véliz Noboa, Bremnen Marino
  • Orpella García, Alberto
  • Bermejo Broto, Sandra
In this study, a metal-insulator-metal capacitor structure is fabricated using polystyrene nanoparticles. Impedance spectroscopy is used to evaluate the performance of this capacitor in which we found a significant magnitude increment in capacitance and loss tangent compared with an equivalent ideal capacitor with continuous polystyrene layer and same geometry. Capacitance values up to 11.7 and loss tangent values up to 387 (at 0.1 Hz) larger than the expected for a continuous polystyrene MIM capacitor are achieved. The capacitor shows a good stable capacitive behaviour in the frequency range from 0.1 Hz to 100 kHz at room temperature, 30 °C, 40 °C and 50 °C without an effective relaxation process. Nyquist, capacitance, loss tangent and normalized powers curves are analysed by modified Randles model. Also, a slight decrease in the capacitance value at 50 °C is observed, which that may be attributed to space charge localized at the nanoparticles interface and that are affected by the temperature changes., Peer Reviewed, Postprint (author's final draft)