Skip to main content

METODOLOGIAS DE ENSAYO Y OPTIMIZACION DE LA COMBUSTION DE LIQUIDOS: DESARROLLO Y APLICACION A TECNOLOGIAS DE BAJA EMISION DE CO2 PARA GENERACION DE ENERGIA

ENE2016-76436-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Evaluation of the combustion characteristics of isolated droplets of Jet A blended with ethanol and butanol

  • Muelas, Álvaro
  • Remacha, Pilar
  • Ballester, Javier
[EN] In light of the potential of ethanol and butanol as alternative fuels for blending with conventional kerosene in gas turbine engines, experimental data regarding the burning characteristics of these blends are required in order to better understand their combustion process. In this study, free-falling droplets of Jet A, ethanol, butanol and their mixtures (20% alcohol in Jet A by volume) were examined in a combustion chamber which provides representative conditions of real flames, both in terms of temperature and oxygen availability. Results show that the evolution of droplet diameter for Jet A and its blends with both alcohols are very similar, regardless of the obvious compositional differences. On the other hand, sooting behaviors are found to be quite different, with a clear reduction in the sooting propensity of the Jet A/alcohol mixtures when compared to neat kerosene. These results are consistent with previous studies in gas turbines, suggesting that such blends are viable alternative fuels with similar combustion characteristics to Jet A, but with much less propensity to produce soot. Moreover, this study provides new results on the combustion properties of Jet A/ethanol and Jet A/butanol mixtures, for which very scarce data exist in the open literature., This work was supported by the Spanish Ministry of Education through the pre-doctoral grant FPU15/01866 and the Ministry of Science and Innovation through the research projects CSD2010-00011 and ENE2016-76436-R. The analysis of the Jet A sample was kindly provided by Drs. R. Murillo and M. Callen, from the Instituto de Carboquímica (ICB-CSIC). The authors are also grateful to Dr. Álvaro Sobrino for his assistance with data capture and analysis, and to Luis Ojeda for his support in the experimental tasks. The work of Mario Angeloni in the development of the Droplet Combustion Facility, without which this study would not have been possible, is also gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Production and droplet combustion characteristics of waste tire pyrolysis oil

  • Muelas, Álvaro
  • Callén Romero, M. Soledad
  • Murillo Villuendas, Ramón
  • Ballester, Javier
7 Figures, 4 Tables.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This work aims to study the pyrolysis of scrap tires as an end-to-end process, from its production to the combustion characteristics of the tire pyrolysis liquid (TPL) obtained. The TPL was produced in a continuous auger reactor (150 kWth) and its combustion characteristics were acquired through a drop tube facility, where the TPL burning behavior was compared to that of conventional heating oil (FO). The evaluated combustion characteristics included droplet and flame size evolution, burning rates, soot shell morphology, microexplosion occurrence and soot analysis. When compared to FO, TPL displayed considerably lower burning rates, although the consistent occurrence of microexplosions effectively shortened the TPL droplets lifetimes below those of FO. TPL also presented smaller flames and a higher propensity to soot. A TPL-FO blend of interest for heating applications (with only 5% of TPL due to its high sulfur content), was also tested, showing identical results to those of neat FO for all the studied combustion characteristics. The reported results are thought to provide valuable experimental data regarding the combustion behavior of a well characterized tire pyrolysis oil, which could also be used as the fuel-specific input data required for the simulation of realistic spray flames., The authors acknowledge the support of the Spanish Ministry of Education (pre-doctoral grant FPU15/01866) and the Spanish MINECO and European Union FEDER funds through the research projects ENE2016-76436-R and ENE2015-68320-R. The economic support of the Aragon Regional Government (DGA) through the research groups funding programme is acknowledged as well., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Droplet combustion and sooting characteristics of UCO biodiesel, heating oil and their mixtures under realistic conditions

  • Muelas, Álvaro
  • Remacha, Pilar
  • Ballester, Javier
15 figures, 1 table., The droplet combustion characteristics of conventional heating oil, UCO biodiesel and their mixtures (10 and 20% biodiesel by volume) were examined in a free-falling droplet combustion facility designed to approach the typical temperature and oxygen conditions around individual droplets in real boiler flames. Moreover, and given the importance of avoiding effects due to gravity or convection in this type of experiments, the quite spherical soot shells recorded (infrequent event in free-falling droplet combustion studies) reveal a configuration close to 1-D, even though tests were performed at normal gravity. The droplet combustion characteristics were evaluated at four different oxygen levels (0,3,5 and 10% O2), and comprise droplet size evolution, burning rates and sizing of the occurring soot shells and envelope flames. Results show indistinguishable behaviors between heating oil and their mixtures, whereas biodiesel displays longer initial heating transients and higher quasi-steady burning rates. Even though the UCO biodiesel studied is highly unsaturated, no signs of polymerization were observed for any of the tests. In addition to these combustion characteristics, an aspirating soot probe was used to quantitatively evaluate the propensity to soot of each fuel at different oxygen levels. The amount of collected soot was found to significantly decrease with biodiesel addition, even though similar results were obtained for both mixtures. The practically identical droplet combustion characteristics between heating oil and its mixtures with biodiesel, in addition to the lower propensity to soot of the latter, support the feasibility of using such blends as drop-in replacement for conventional heating oil. The experimental results obtained are thought to constitute a valuable database for the development and validation of modeling tools for the prediction of droplet evaporation and combustion of practical fuels in realistic conditions., This work was supported by the Spanish Ministry of Education through the pre-doctoral grant FPU15/01866 and the Ministry of Economy and Competitiveness and European Union FEDER funds through the research project ENE2016-76436-R. ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Alternative method for the formulation of surrogate liquid fuels based on evaporative and sooting behaviors

  • Muelas, Álvaro
  • Aranda, Diego
  • Ballester, Javier
16 figures, 1 table.-- The underlying dataset as been published as supplementary material of the article in the publisher platform at DOI 10.1021/acs.energyfuels.9b00737., This study proposes a novel approach to design and evaluate surrogates for liquid fuels, aimed at replicating their evaporative and sooting behaviors. The method was demonstrated for a commercial heating oil. The lack of surrogates found in the literature for this relevant fuel, in addition to its physicochemical complexity, was the primary reason for its choice to test the proposed method. A first surrogate aiming to emulate the evaporative behavior of the target fuel was designed through the combination of a theoretical evaporation model and experimental tests. The second surrogate was formulated to replicate the sooting behavior of heating oil, whereas a third surrogate aimed to match the physicochemical properties relevant for both processes. The so-designed surrogates were validated afterward by means of single-droplet evaporation tests under high-temperature conditions. The obtained evaporation curves served as a benchmark for evaluating the evaporative characteristic, whereas an aspirating probe collecting all of the soot produced at a high-temperature and reducing atmosphere was used for the validation of the sooting tendency. It was found that surrogates specifically designed to match the evaporative and sooting behaviors of the target fuel displayed a remarkably good agreement when validated against experimental data for heating oil. Overall, the obtained results confirmed the validity of the methodologies proposed for surrogate formulation, combining predictive methods and droplet evaporation tests at high temperatures., This work was financed by the Spanish Ministry of Economy, Industry and Competitiveness and EU FEDER funds through research project ENE2016-76436-R and by the Spanish Ministry of Education through the predoctoral grant FPU15/01866., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Properties and combustion characteristics of bio-oils from catalytic co-pyrolysis of grape seeds, polystyrene, and waste tires

  • Muelas, Álvaro
  • Aranda, Diego
  • Callén Romero, M. Soledad
  • Murillo Villuendas, Ramón
  • Veses Roda, Alberto
  • Mohamad, Asrardel
  • Ballester, Javier
9 figures, 3 tables.-- This document is the Accepted Manuscript version of a Published Work that appeared in final form in ENERGY & FUELS, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.energyfuels.0c02257., This work aims to study the bio-oils obtained from the catalytic co-pyrolysis of waste polymers and a residual biomass (grape seeds, GS). For that purpose, the organic liquid fractions produced in an auger reactor were thoroughly characterized in two steps, obtaining in the first place their main physicochemical properties as well as their chemical compositions, and second, their droplet combustion behaviors. Both the polymer type (waste tires or polystyrene, WT and PS, respectively) and the nature of the low-cost, calcium-based catalyst used (Carmeuse limestone, calcined dolomite, or an inert material such as sand) were studied. A significant improvement in the physicochemical properties of the bio-oils was obtained when using a catalyst, with lower viscosity, density, and oxygen content. These beneficial effects were more marked for the bio-oil produced with the Carmeuse catalyst, presumably due to the higher prevalence of aromatization and hydro-deoxygenation reactions. When changing the polymer source from WT to PS, a considerable increase in the aromatic content and a viscosity reduction were noted. The droplet combustion tests revealed the consistent occurrence of microexplosions for all of the studied bio-liquids, these bursting events being more violent for the GS–PS oil. Regarding the evaporation behavior, this liquid also yielded significantly higher burning rates during the initial heat-up phase, in agreement with its richer composition in volatile compounds such as styrene. These results point to this fuel as the one with the best global combustion behavior from all of the explored bio-oils. The GS–WT liquids showed much closer features among them, although with noticeable differences depending on the catalyst used. A more volatile behavior was observed for GS–WT Carmeuse, followed by GS–WT dolomite and GS–WT sand, strengthening thus the previously reported improvements in physicochemical properties. Finally, the propensity to form soot of these bio-oils was characterized through a soot probe, which revealed a higher soot yield for the bio-liquids produced with the Carmeuse catalyst., This work was financed by the Spanish Ministry of Economy, Industry, and Competitiveness and EU FEDER funds through research projects ENE2016-76436-R and ENE2015-68320-R, the Spanish Ministry of Education through the predoctoral grant FPU15/01866, and the Regional Government of Aragon (DGA) under the research group call., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combustion of crude glycerol and its blends with acetals

  • Muelas, Álvaro
  • Remacha, Pilar
  • Pina, Antonio
  • Barroso Estébanez, Jorge
  • Sobrino, Álvaro
  • Aranda, Diego
  • Bayarri, Natividad
  • Estévez, Carles
  • Ballester, Javier
10 figures, 2 tables., In spite of its relevance, the prospective energetic valorization of crude glycerol (CG), a major by-product of biodiesel production, remains nowadays unfulfilled in the industry because of the significant challenges posed by its combustion properties. Besides some basic post-treatments such as desalting (to obtain desalted crude glycerol, DG), its blending with other industrial by-products could improve crude glycerol properties, while maintaining the renewable nature of the fuel. A secondary product obtained from the FAGE process, consisting in a mixture of acetals named GF*, has been proposed in this work as a suitable fuel for this purpose. The combustion characteristics of these by-products have been tested along with different CG-GF* and DG-GF* blends by employing single droplet combustion experiments and semi-industrial furnace tests. Single droplet results point to widely different behaviors between GF* and the glycerols, the latter displaying much lower burning rates and violent microexplosions ascribed to salt content as well as to the broad differences in their constituent's boiling points. Relevant differences were noted between DG and CG modes of microexplosion, presumably due to the lower salt content of the former. Both CG-GF* and DG-GF* mixtures presented similar behaviors to CG, although with a noticeably faster conversion. The furnace tests revealed that GF* addition widened the range of stable conditions in the burner, significantly improving flame stability and reducing CO emissions. NOx emissions slightly increased, although they could be reduced through burner aerodynamics optimization, facilitated by the improvement in flame stability. The reported results support the potential use of GF* as auxiliary fuel for enhancing the combustion behaviors of crude glycerol., This work was financed by the Spanish Ministry of Economy, Industry and Competitiveness and EU FEDER funds through research projects RTC-2016-4618-3 and ENE2016-76436-R, and by the Spanish Ministry of Education through the grant FPU15/01866., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrolysis effects during high-temperature vaporization of alkane droplets

  • Muelas, Álvaro
  • Carpio, Jaime
  • Ballester, Javier
  • Sánchez, Antonio L.
  • Williams, Forman A.
3 figures, 1 table., The temporal evolution of the droplet radius is measured experimentally in high-temperature inert atmospheres for three different alcohols (ethanol, n-butanol, and glycerol) and three alkanes (n-heptane, n-dodecane, and n-hexadecane). It is shown that, while accompanying theoretical predictions of droplet-radius variations show excellent accuracy for the three alcohols, the three alkanes exhibit vaporization rates that are significantly smaller than those predicted theoretically. The accompanying observation of significant soot formation suggests that endothermic fuel pyrolysis may be responsible for the diminished vaporization rate. The quantification of this phenomenon is investigated here using a one-step irreversible reaction with an Arrhenius rate to model the fuel decomposition. It is shown how an analytical description developed on the basis of activation-energy asymptotics can be used in combination with the experimental measurements of the temporal droplet-radius evolution to adjust the fuel-pyrolysis kinetics, embodied at leading order in an effective pyrolysis temperature, which is obtained for n-heptane, n-dodecane, and n-hexadecane., The work of AM and JB was supported by the Spanish Ministry of Education through the pre-doctoral grant FPU15/01866 and the Spanish Ministry of Economy and Competitiveness and European Union FEDER funds through research project ENE2016-76436-R. The work of JC was supported through the Ministerio de Ciencia, Innovación y Universidades through project # PGC2018-097565-B-I00 and through travel grant # CAS18/00426., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pyrolysis effects during high-temperature vaporization of alkane droplets

  • Muelas, Álvaro
  • Carpio, Jaime
  • Ballester, Javier
  • Sánchez, Antonio L.
  • Williams, Forman A.
The temporal evolution of the droplet radius is measured experimentally in high-temperature inert atmospheres for three different alcohols (ethanol, n-butanol, and glycerol) and three alkanes (n-heptane, n-dodecane, and n-hexadecane). It is shown that, while accompanying theoretical predictions of droplet-radius variations show excellent accuracy for the three alcohols, the three alkanes exhibit vaporization rates that are significantly smaller than those predicted theoretically. The accompanying observation of significant soot formation suggests that endothermic fuel pyrolysis may be responsible for the diminished vaporization rate. The quantification of this phenomenon is investigated here using a one-step irreversible reaction with an Arrhenius rate to model the fuel decomposition. It is shown how an analytical description developed on the basis of activation-energy asymptotics can be used in combination with the experimental measurements of the temporal droplet-radius evolution to adjust the fuel-pyrolysis kinetics, embodied at leading order in an effective pyrolysis temperature, which is obtained for n-heptane, n-dodecane, and n-hexadecane.