Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Principal component analysis of MSBAS DInSAR time series from Campi Flegrei, Italy

  • Tiampo, Kristy F.
  • González, Pablo J.
  • Samsonov, Sergey
  • Fernández Torres, José
  • Camacho, Antonio G.
Because of its proximity to the city of Naples and with a population of nearly 1 million people within its caldera, Campi Flegrei is one of the highest risk volcanic areas in the world. Since the last major eruption in 1538, the caldera has undergone frequent episodes of ground subsidence and uplift accompanied by seismic activity that has been interpreted as the result of a stationary, deeper source below the caldera that feeds shallower eruptions. However, the location and depth of the deeper source is not well-characterized and its relationship to current activity is poorly understood. Recently, a significant increase in the uplift rate has occurred, resulting in almost 13 cm of uplift by 2013 (De Martino et al., 2014; Samsonov et al., 2014b; Di Vito et al., 2016). Here we apply a principal component decomposition to high resolution time series from the region produced by the advanced Multidimensional SBAS DInSAR technique in order to better delineate both the deeper source and the recent shallow activity. We analyzed both a period of substantial subsidence (1993–1999) and a second of significant uplift (2007–2013) and inverted the associated vertical surface displacement for the most likely source models. Results suggest that the underlying dynamics of the caldera changed in the late 1990s, from one in which the primary signal arises from a shallow deflating source above a deeper, expanding source to one dominated by a shallow inflating source. In general, the shallow source lies between 2700 and 3400 m below the caldera while the deeper source lies at 7600 m or more in depth. The combination of principal component analysis with high resolution MSBAS time series data allows for these new insights and confirms the applicability of both to areas at risk from dynamic natural hazards., The work of PG was supported by a Banting Postdoctoral Fellowship. This research was partially funded by the NERC project Centre for the Observation and Modelling of Earthquakes, Volcanoes and Tectonics (COMET, GA/13/M/031, http://comet.nerc.ac.uk). The work of KFT was supported by an NSERC Discovery Grant and CIRES, University of Colorado Boulder. This work also was supported by the AQUARISK Spanish project and the EU MED-SUV project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A-DInSAR Monitoring of Landslide and Subsidence Activity: A Case of Urban Damage in Arcos de la Frontera, Spain

  • Bru, Guadalupe
  • González, Pablo J.
  • Mateos Ruiz, Rosa María
  • Roldán, Francisco Javier
  • Herrera García, Gerardo
  • Béjar Pizarro, Marta
  • Fernández Torres, José
Terrain surface displacements at a site can be induced by more than one geological process. In this work, we use advanced differential interferometry SAR (A-DInSAR) to measure ground deformation in Arcos de la Frontera (SW Spain), where severe damages related to landslide activity and subsidence have occurred in recent years. The damages are concentrated in two residential neighborhoods constructed between 2001 and 2006. One of the neighborhoods, called La Verbena, is located at the head of an active retrogressive landslide that has an extension of around 0.17 × 106 m2 and developed in weathered clayey soils. Landslide motion has caused building deterioration since they were constructed. After a heavy rainfall period in winter 2009–2010, the movement was accelerated, worsening the situation. The other neighborhood, Pueblos Blancos, was built over a poorly compacted artificial filling undergoing a spatially variable consolidation process which has also led to severe damage to buildings. For both cases, a short set of C-band data from the “ENVISAT 2010+” project has been used to monitor surface displacement for the period spanning April 2011–January 2012. In this work we characterize the mechanism of both ground deformation processes using in situ and remote sensing techniques along with a detailed geological interpretation and urban damage distribution, We thank the Spanish Ministerio de Economía y Competitividad (MINECO) research projects AYA2010-17448, ESP2013-47780-C2-1-R, ESP2013-47780-C2-2-R and CGL2011-29920. Data were provided by the ESA (European Space Agency)-CAT1:4460 project. Part of this research have been also supported by funds from the European Union Seventh Framework Programme (FP7/2007–2013) under Grant Agreement N. 312384. LAMPRE Project. It is a contribution for the Moncloa Campus of International Excellence., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mapping Vulnerable Urban Areas Affected by Slow-Moving Landslides Using Sentinel-1 InSAR Data

  • Béjar Pizarro, Marta
  • Notti, Davide
  • Mateos Ruiz, Rosa María
  • Ezquerro Martín, Pablo
  • Centolanza, Giuseppe
  • Herrera García, Gerardo
  • Bru, Guadalupe
  • Sanabria, Margarita
  • Solari, Lorenzo
  • Duro, Javier
  • Fernández Torres, José
Landslides are widespread natural hazards that generate considerable damage and economic losses worldwide. Detecting terrain movements caused by these phenomena and characterizing affected urban areas is critical to reduce their impact. Here we present a fast and simple methodology to create maps of vulnerable buildings affected by slow-moving landslides, based on two parameters: (1) the deformation rate associated to each building, measured from Sentinel-1 SAR data, and (2) the building damage generated by the landslide movement and recorded during a field campaign. We apply this method to Arcos de la Frontera, a monumental town in South Spain affected by a slow-moving landslide that has caused severe damage to buildings, forcing the evacuation of some of them. Our results show that maximum deformation rates of 4 cm/year in the line-of-sight (LOS) of the satellite, affects La Verbena, a newly-developed area, and displacements are mostly horizontal, as expected for a planar-landslide. Our building damage assessment reveals that most of the building blocks in La Verbena present moderate to severe damages. According to our vulnerability scale, 93% of the building blocks analysed present high vulnerability and, thus, should be the focus of more in-depth local studies to evaluate the serviceability of buildings, prior to adopting the necessary mitigation measures to reduce or cope with the negative consequences of this landslide. This methodology can be applied to slow-moving landslides worldwide thanks to the global availability of Sentinel-1 SAR data., This work is supported by the Spanish Ministry of Economy and Competitiveness and EU FEDER funds under projects ESP2013-47780-C2-2-R and ESP2013-47780-C2-1-R. Sentinel-1 data were provided by the European Space Agency (ESA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Suitability Assessment of X-Band Satellite SAR Data for Geotechnical Monitoring of Site Scale Slow Moving Landslides

  • Bru, Guadalupe
  • Escayo, Joaquin
  • Fernández Torres, José
  • Mallorquí Franquet, Jordi Joan
  • Iglesias, Rubén
  • Sansosti, Eugenio
  • Abajo, Tamara
  • Morales, Antonio
This work addresses the suitability of using X-band Synthetic Aperture Radar (SAR) data for operational geotechnical monitoring of site scale slow moving landslides, affecting urban areas and infrastructures. The scale of these studies requires high resolution data. We propose a procedure for the practical use of SAR data in geotechnical landslides campaigns, that includes an appropriate dataset selection taking into account the scenario characteristics, a visibility analysis, and considerations when comparing advanced differential SAR interferometry (A-DInSAR) results with other monitoring techniques. We have determined that Sentinel-2 satellite optical images are suited for performing high resolution land cover classifications, which results in the achievement of qualitative visibility maps. We also concluded that A-DInSAR is a very powerful and versatile tool for detailed scale landslide monitoring, although in combination with other instrumentation techniques., This work was financially supported by the Spanish Ministerio de Economía y Competitividad (MINECO) research projects IPT-2011-1234-310000, ESP2013-47780-C2-1-R, and RTC-2014-1922-5. Research by RI and JJM has been also supported by the Big Risk project (contract number BIA2008-06614) and by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO), the State Research Agency (AEI) and the European Funds for Regional Development (EFRD) under project TEC2017-85244-C2-1-P. CommSensLab is Unidad de Excelencia Maria de Maeztu MDM-2016-0600 financed by the Agencia Estatal de Investigación, Spain, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Integration of SAR and passive seismic data for monitoring mining activities (Minas Riotinto, SW Iberia)

  • Marzán, Ignacio
  • Escayo, Joaquin
  • Martí, David
  • Tornos, F.
  • Ruiz Fernández, Mario
  • Andrés, Juvenal
  • Schimmel, Martin
  • Luzón, Francisco
  • Carbonell, Ramón
  • Fernández Torres, José
Trabajo presentado en la European Geosciences Union General Assembly, celebrada en Viena (Austria), del 8 al 13 de abril de 2018, The extraction of raw materials is constrained by hazards linked to mining activities. Earthworks and pumping change soil mechanical properties and can cause landslides, subsidence or runoff drifting with potential serious economic, environmental and human-life consequences. The present research aims to reduce mining hazards by developing a “real time” system for monitoring ground instabilities. Our approach combines SAR Copernicus data (Sentinel-1) for surface deformation modeling and passive seismic data for subsurface imaging. Both data sources require low maintenance, can be automatized, record non-stop and fully cover the target zone; all suitable characteristics for an Early Warning System tool. This pilot study is being performed in the world-class Riotinto mine, SW Spain, with mining activity going back for more than 4000 years. A-DInSar techniques (CPT) have been used for processing Sentinel-1 images to establish the baseline surface deformation field. Our algorithm will automatically update the image catalogue and the surface deformation model. Environmental and anthropogenic “seismic noise” will be used for the subsurface imaging. The mining activities generate a broad variety of acoustical signal. Currently, the main seismic sources are being characterized. Autocorrelation and noise interferometry techniques will be use for underground dynamic imaging. Both datasets will be integrated into a new protocol for monitoring the mechanical integrity of the shallow subsurface, applicable to a wide range of environments, Research support, Ref: 248/G/GRO/COPE/16/9077 - Lot 2, CGL2016-81964-REDE, CGL2014-56548-P, ESP2013-47780-C2-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deep volcanic morphology below Lanzarote, Canaries, from gravity inversion: New results for Timanfaya and implications

  • Fernández Torres, José
  • Camacho, Antonio G.
  • Prieto, Juan Francisco
  • Ancochea, Eumenio
The deep roots of oceanic island volcanoes are poorly known and geophysical models can help to constrain processes such as magma storage and transport before and during eruptions. Lanzarote, Canary Islands, is a volcanic island in post-erosional phase where, in the 18th century, one of the most important historical eruptions, considering duration and volume, of the Canary Islands took place in the Timanfaya area. To improve the knowledge on the structure of Lanzarote and in Timanfaya area, we carry out a gravity determination of the subsurface anomalous 3D density structure, using an improved quasi-automatic inversion methodology. The obtained model presents a 3D morphology of anomalous density bodies. We describe the improvements of the inversion methodology, the adjusted model and interpretative conclusions corresponding to the structure and the long-term cumulative magmatic plumbing system of the island. Three high-density sources are described as resulting in the inference of three main volcanic complexes: a large central complex (San Bartolomé) and two smaller complexes, one in the NE and a third smaller one located in the SW close to the Timanfaya area. The outcrops of Miocene lava flows from the center of the Island can be attributed to the top of the central intrusive model. We infer the local plumbing system for Timanfaya volcano area by means of strongly tilted successive branches of magma departing from the SW intrusive body. The structural results show no evidence of any magma chamber below Timanfaya as proposed by previous works. We also present a comparison of the gravity results and geological observations, showing different cases of correlation in the Island. They go from a good match between the gravity anomaly and the position of the central volcanic structure, to no anomaly associated to the fissural Quaternary volcanic activity.