Skip to main content

DESARROLLO DEL INSTRUMENTO RAMAN PARA LA MISION EXOMARS DE LA ESA: FASE C/D- INSTRUMENTO

ESP2014-56138-C3-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre INSTITUTO NACIONAL DE TECNICA AEROESPACIAL ESTEBAN TERRADAS (INTA)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Artículo científico (JournalArticle)

SuperCam Calibration Targets: Design and Development

  • Manrique, J. A.
  • López Reyes, G.
  • Cousin, Agnes
  • Rull, F.
  • Maurice, Sylvestre
  • Wiens, Roger
  • Madariaga, M. B.
  • Gasnault, O.
  • Aramendia, J.
  • Arana, G.
  • Beck, P.
  • Bernard, S.
  • Bernardi, P.
  • Bernt, M. H.
  • Berrocal, A.
  • Beyssac, O.
  • Caïs, P.
  • Castro, K.
  • Clegg, S. M.
  • Cloutis, E.
  • Dromart, G.
  • Drouet, C.
  • Dubois, B.
  • Escribano, D.
  • Fabre, C.
  • Fernández, A.
  • Forni, Olivier
  • García Baonza, V.
  • Gontijo, I.
  • Johnson, J. R.
  • Laserna, Javier
  • Lasue, J.
  • Madsen, Soren N.
  • Mateo Marti, Eva
  • Medina García, J.
  • Meslin, P.
  • Montagnac, G.
  • Moros, J.
  • Ollila, A. M.
  • Ortega, Cristina
  • Prieto-Ballesteros, Olga
  • Reess, J. M.
  • Robinson, S.
  • Rodríguez, Joseph
  • Saiz, J.
  • Sanz Arranz, Aurelio
  • Sard, I.
  • Sautter, V.
  • Sobron, P.
  • Toplis, M.
  • Veneranda, M.
Part of a collection: The Mars 2020 Mission, SuperCam is a highly integrated remote-sensing instrumental suite for NASA’s Mars 2020 mission. It consists of a co-aligned combination of Laser-Induced Breakdown Spectroscopy (LIBS), Time-Resolved Raman and Luminescence (TRR/L), Visible and Infrared Spectroscopy (VISIR), together with sound recording (MIC) and high-magnification imaging techniques (RMI). They provide information on the mineralogy, geochemistry and mineral context around the Perseverance Rover. The calibration of this complex suite is a major challenge. Not only does each technique require its own standards or references, their combination also introduces new requirements to obtain optimal scientific output. Elemental composition, molecular vibrational features, fluorescence, morphology and texture provide a full picture of the sample with spectral information that needs to be co-aligned, correlated, and individually calibrated. The resulting hardware includes different kinds of targets, each one covering different needs of the instrument. Standards for imaging calibration, geological samples for mineral identification and chemometric calculations or spectral references to calibrate and evaluate the health of the instrument, are all included in the SuperCam Calibration Target (SCCT). The system also includes a specifically designed assembly in which the samples are mounted. This hardware allows the targets to survive the harsh environmental conditions of the launch, cruise, landing and operation on Mars during the whole mission. Here we summarize the design, development, integration, verification and functional testing of the SCCT. This work includes some key results obtained to verify the scientific outcome of the SuperCam system., The authors would like to thank the Spanish MINECO, projects ESP2014-56138-C3-1-R, ESP2055-71965-REDT, ESP2017-87690-C3-1-R, and RED2018-102600-T for funding. Additional funding in Spain was provided by the University of Valladolid and the local and regional institutions as Valladolid City Council, Valladolid Provincial Council, Junta de Castilla y Leon and we are grateful for their support. Support in the US was provided by NASA’s Mars Exploration Program. Support in France was provided by CNES, CNRS, and local Universities. The Valladolid team thanks in particular the RLS team from INTA and the University of Valladolid for their strong support in many phases of this exciting project. The Danish contribution was funded through support by the Carlsberg Foundation, grants CF16-0981 and CF17-0979 and in addition, we are grateful to DuPont Electronic Materials for providing the Kapton® foils used for reducing the transfer of shock energy to the permanent magnets used for color references. In Canada, funding was provided by the Canadian Space Agency, NSERC, CFI, MRIF, and U. Winnipeg., Peer review
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publication Conferencia académica (Lecture)

Estudio de la urna de protección frente a contaminación biológica y ambiental para los ensayos de EMC del instrumento RLS de la misión ExoMars

  • Jiménez Lorenzo, María
  • Plaza Gallardo, Borja
  • López Sanz, Daniel
  • Rodríguez Prieto, J. A.
  • Martín Iglesias, Santiago
  • Poyatos Martínez, David
El RLS (Raman Laser Spectrometer) es un espectrómetro Raman que forma parte de la carga de pago de la misión ExoMars 2022 a bordo del rover ‘Rosalind Franklin’ de la Agencia Espacial Europea (ESA). Este instrumento, desarrollado en el Instituto Nacional de Técnica Aeroespacial (INTA), debe ser sometido a una serie de ensayos de calificación, entre los que se encuentran los de compatibilidad electromagnética (EMC) de acuerdo al estándar ECSS-E-ST-20-07C Rev.1 y los requisitos propios de la misión. Para poder cumplir con los requisitos de protección planetaria de la misión, todas las actividades (integración, validación y ensayos) deben realizarse en condiciones de limpieza. Por ello, es necesario el diseño y la fabricación de una urna de protección que no interfiera en las medidas durante los ensayos de EMC permitiendo mantener los requisitos de limpieza durante los mismos. Por ello, la urna debe fabricarse empleando materiales lo más transparentes posible a los campos electromagnéticos para las frecuencias de ensayo. En este artículo se explica el proceso de elección del material entre diferentes materiales compuestos susceptibles de ser usados para esta aplicación, el desarrollo y fabricación de la urna y su caracterización electromagnética. Esto permitirá avanzar en la comprensión del comportamiento electromagnético de este tipo de estructuras y materiales, e investigar en nuevas geometrías y materiales durante la fase de diseño que mejoren las prestaciones finales de las urnas diseñadas para proyectos futuros., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación (MICINN) bajo el marco de los proyectos UAVE3 (TEC2016-79214-C3-1-R), eSAFE-UAV (PID2019-106120RB-C32) y Desarrollo del espectrómetro Raman para la misión ExoMars. Instrumento fase C/D (ESP2014-56138-C3-1-R)., Preprint