Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Testing the performance of sensors for ozone pollution monitoring in a citizen science approach

  • Ripoll, Anna
  • Viana, Mar
  • Padrosa, M.
  • Querol, Xavier
  • Minutolo, A.
  • Hou, K. M.
  • Barceló-Ordinas, José María
  • García-Vidal, Jorge
Tropospheric ozone (O3) is an environmental pollutant of growing concern, especially in suburban and rural areas where the density of air quality monitoring stations is not high. In this type of areas citizen science strategies can be useful tools for awareness raising, but sensor technologies must be validated before sensor data are communicated to the public. In this work, the performance under field conditions of two custom-made types of ozone sensing devices, based on metal-oxide and electrochemical sensors, was tested. A large array of 132 metal-oxide (Sensortech MICS 2614) and 11 electrochemical (Alphasense) ozone sensors, built into 44 sensing devices, was co-located at reference stations in Italy (4 stations) and Spain (5). Mean R2 between sensor and reference data was 0.88 (0.78–0.96) and 0.89 (0.73–0.96) for Captor (metal-oxide) and Raptor (electrochemical) nodes. The metal-oxide sensors showed an upper limit (approximately 170 μg/m3) implying that these sensors may be useful to communicate mean ozone concentrations but not peak episodes. The uncertainty of the nodes was 10% between 100 and 150 μg/m3 and 20% between 150 and 200 μg/m3, for Captors, and 10% for >100 μg/m3 for Raptors. Operating both types of nodes up to 5 months did not evidence any clear influence of drifts. The use of these sensors in citizen science can be a useful tool for awareness raising. However, significant data processing efforts are required to ensure high data quality, and thus machine learning strategies are advisable. Relative uncertainties should always be reported when communicating ozone concentration data from sensing nodes. © 2018 The Authors, The authors would like to thank the anonymous reviewers, whose comments improved the manuscript significantly. This work was funded by H2020 project CAPTOR. The authors gratefully acknowledge the collaboration of the staff at the Department of the Environment of the Generalitat de Catalunya and at ARPA Lombardia (Agenzia Regionale per l'Ambiente), who kindly provided support for the deployment of the sensing nodes at reference stations and provided access to the reference data. Support is also acknowledged from AGAUR SGR44, the Agencia Estatal de Investigación (AEI; CGL2017-82093-ERC ), and the Spanish Ministry of Economy, Industry and Competitiveness ( EUIN2017-85799 ). Appendix A, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Distributed multi-scale calibration of low-cost ozone sensors in wireless sensor networks

  • Barceló-Ordinas, José María
  • Ferrer-Cid, Pau
  • García-Vidal, Jorge
  • Ripoll, Anna
  • Viana, Mar
New advances in sensor technologies and communications in wireless sensor networks have favored the introduction of low-cost sensors for monitoring air quality applications. In this article, we present the results of the European project H2020 CAPTOR, where three testbeds with sensors were deployed to capture tropospheric ozone concentrations. One of the biggest challenges was the calibration of the sensors, as the manufacturer provides them without calibrating. Throughout the paper, we show how short-term calibration using multiple linear regression produces good calibrated data, but instead produces biases in the calculated long-term concentrations. To mitigate the bias, we propose a linear correction based on Kriging estimation of the mean and standard deviation of the long-term ozone concentrations, thus correcting the bias presented by the sensors. © 2019, MDPI AG. All rights reserved., Funding text #1 Universitat Politecnica de Catalunya (UPC), UPC Campus Nord, 08034 Barcelona, Spain; pauferrercid12@gmail.com (P.F.-C.); jorge@ac.upc.edu (J.G.-V.) Institute of Environmental Assessment and Water Research, Spanish National Research Council (IDAEA-CSIC), 08034 Barcelona, Spain; anna.ripoll@idaea.csic.es (A.R.); mar.viana@idaea.csic.es (M.V.) Correspondence: joseb@ac.upc.edu; Tel.:+34-93-405-4051 Funding text #2 Funding: This work is supported by the National Spanish funding TIN2016-78473-C3-1-R, regional Spanish funding AGAUR 2017SGR-990, 2017-SGR-44, the Agencia Estatal de Investigación (AEI; CGL2017-82093-ERC), and the Spanish Ministry of Economy, Industry and Competitiveness (EUIN2017-85799) and European H2020 CAPTOR project., Peer reviewed