Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale imaging of buried topological defects with quantitative X-ray magnetic microscopy

  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Hierro-Rodríguez, Aurelio
  • Álvarez-Prado, L. M.
  • Duch Llobera, Marta
  • Torras Andrés, Núria
  • Esteve i Tintó, Jaume
  • Vélez, María
  • Alameda, J. M.
  • Ferrer, Salvador
This work is licensed under a Creative Commons Attribution 4.0 International License.-- et al., Advances in nanoscale magnetism increasingly require characterization tools providing detailed descriptions of magnetic configurations. Magnetic transmission X-ray microscopy produces element specific magnetic domain images with nanometric lateral resolution in films up to ∼100 nm thick. Here we present an imaging method using the angular dependence of magnetic contrast in a series of high resolution transmission X-ray microscopy images to obtain quantitative descriptions of the magnetization (canting angles relative to surface normal and sense). This method is applied to 55-120 nm thick ferromagnetic NdCo 5 layers (canting angles between 65° and 22°), and to a NdCo 5 film covered with permalloy. Interestingly, permalloy induces a 43° rotation of Co magnetization towards surface normal. Our method allows identifying complex topological defects (merons or 1/2 skyrmions) in a NdCo 5 film that are only partially replicated by the permalloy overlayer. These results open possibilities for the characterization of deeply buried magnetic topological defects, nanostructures and devices., Work supported by Spanish MINECO under grant FIS2013-45469. A. Hierro-Rodriguez acknowledges support from FCT of Portugal (Grant SFRH/BPD/90471/2012). C. Blanco-Roldán thanks support from CSIC JAE Predoc Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the anodic aluminium oxide refractive index of nanoporous templates

  • Hierro-Rodríguez, Aurelio
  • Valdés-Bango, F.
  • Alameda, J. M.
  • Teixeira, J. M.
In the present study, we have determined the intrinsic refractive index of anodic aluminium oxide, which is originated by the formation of nanoporous alumina templates. Different templates have been fabricated by the conventional two-step anodization procedure in oxalic acid. Their porosities were modified by chemical wet etching allowing the tuning of their effective refractive indexes (air-filled nanopores + anodic aluminium oxide). By standard spectroscopic light transmission measurements, the effective refractive index for each different template was extracted in the VIS-NIR region. The determination of the intrinsic anodic aluminium oxide refractive index was performed by using the Maxwell-Garnett homogenization theory. The results are coincident for all the fabricated samples. The obtained refractive index (∼1.55) is quite lower (∼22%) than the commonly used AlO handbook value (∼1.75), showing that the amorphous nature of the anodic oxide structure strongly conditions its optical properties. This difference is critical for the correct design and modeling of optical plasmonic metamaterials based on anodic aluminium oxide nanoporous templates., The authors acknowledge the financial support from Spanish MINECO under project FIS2013-45469-C4-4-R and FCT of Portugal under projects UID/EEA/50014/2013 and UID/NAN/50024/2013, and NORTE-07-0124-FEDER-000070 –Multifunctional Nanomaterials and NORTE-07-0124-FEDER-000058, which are financed by the North Portugal Regional Operational Programme (ON.2–O Novo Norte), under the National Strategic Reference Framework (NSRF), through the European Regional Development Fund (ERDF), and by national funds, through the Portuguese funding agency, FCT. A Hierro-Rodriguez and J M Teixeira acknowledge support from FCT of Portugal (Grants SFRH/BPD/90471/2012 and SFRH/BPD/72329/2010, respectively) and POPH/FSE programs., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning interfacial domain walls in GdCo/Gd/GdCo′ spring magnets

  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Vélez, María
  • Alameda, J. M.
  • Martín, José Ignacio
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY).-- et al., Spring magnets based on GdCo multilayers have been prepared to study the nucleation and evolution of interfacial domain walls (iDWs) depending on layer composition and interlayer coupling. GdCo alloy compositions in each layer were chosen so that their net magnetization aligns either with the Gd (Gd35Co65) or Co(Gd11Co89) sublattices. This condition forces an antiparallel arrangement of the layers' net magnetization and leads to nucleation of iDWs above critical magnetic fields whose values are dictated by the interplay between Zeeman and exchange energies. By combining x-ray resonant magnetic scattering with Kerr magnetometry, we provide detailed insight into the nucleation and spatial profile of the iDWs. For strong coupling (GdCo/GdCo′ bilayer), iDWs are centered at the interface but with asymmetric width depending on each layer magnetization. When interlayer coupling is weakened by introducing a thin Gd interlayer, the exchange spring effect becomes restricted to a lower temperature and field range than observed in the bilayer structure. Due to the ferromagnetic alignment between the high magnetization Gd35Co65 layer and the Gd interlayer, the iDW shrinks and moves into the lower exchange Gd interlayer, causing a reduction of iDW energy., Work supported by Spanish Ministerio de Economía y Competitividad (MINECO) under grant FIS2013-45469 and Spanish Ministerio de Ciencia e Innovacion (MICINN) under grant FIS2008-06249. Work at Argonne was supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unravelling the tunable exchange bias-like effect in magnetostatically-coupled two dimensional hybrid (hard/soft) composites

  • Hierro-Rodríguez, Aurelio
  • Teixeira, J. M.
  • Rodríguez-Rodríguez, G.
  • Rubio, Honorino
  • Vélez, María
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
Hybrid 2D hard-soft composites have been fabricated by combining soft (Co73Si27) and hard (NdCo5) magnetic materials with in-plane and out-of-plane magnetic anisotropies, respectively. They have been microstructured in a square lattice of CoSi anti-dots with NdCo dots within the holes. The magnetic properties of the dots allow us to introduce a magnetostatic stray field that can be controlled in direction and sense by their last saturating magnetic field. The magnetostatic interactions between dot and anti-dot layers induce a completely tunable exchange bias-like shift in the system’s hysteresis loops. Two different regimes for this shift are present depending on the lattice parameter of the microstructures. For large parameters, dipolar magnetostatic decay is observed, while for the smaller one, the interaction between the adjacent anti-dot’s characteristic closure domain structures enhances the exchange bias-like effect as clarified by micromagnetic simulations., This work was supported by Portuguese FCT under project PTDC/FIS/119027/2010 (FCOMP-01-0124-FEDER-020713) and Spanish MINECO under grant FIS2013-45469. A Hierro-Rodriguez and J M Teixeira acknowledge support from FCT of Portugal (Grant Nos. SFRH/BPD/90471/2012 and SFRH/BPD/72329/2010, respectively)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Caracterización de la anisotropía magnética perpendicular de láminas continuas y multicapas de DyCo5

  • Blanco-Roldán, C.
  • Hierro-Rodríguez, Aurelio
  • Díaz, Javier
  • Valdés-Bango, F.
  • Teixeira, J. M.
  • Rubio, Honorino
  • Martín, José Ignacio
  • Quirós, Carlos
  • Alameda, J. M.
Resumen del póster presentado a la XXXV Reunión Bienal de la Real Sociedad Española de Física y al 25º Encuentro Ibérico de Enseñanza de la Física, celebrados en Gijón (España) del 13 al 17 de julio de 2015.-- et al., [Introducción]: Las láminas delgadas de aleaciones amorfas de tierra rara y metal de transición han sido ampliamente estudiadas por la posibilidad de controlar sus propiedades magnéticas mediante una elección adecuada de su composición y grosor. En este trabajo analizamos el comportamiento magnético de dos aleaciones amorfas de DyCo5, una preparada en forma de lámina continua y otra en forma de multicapa de periodo ultrafino, mediante el análisis combinado de ciclos de histéresis globales, obtenidos mediante técnicas de magnetometría, y de ciclos específicos al Dy y al Co, obtenidos mediante dicroísmo magnético circular de rayos X (XMCD). Además, los resultados obtenidos se comparan con los de láminas de referencia de YCo5, preparadas con el fin de extraer el comportamiento magnético de los átomos de Co en un entorno químico similar al de las aleaciones de DyCo5. Nuestros resultados complementan los publicados recientemente para aleaciones de DyCo3, aunque en nuestro caso hemos realizado una caracterización a campos magnéticos más elevados y hemos aplicado una interpretación compatible con los modelos esperimagnéticos característicos de este sistema. [Experimental]: Las muestras, de 35 nm de grosor, han sido preparadas por pulverización catódica de blancos de Dy (pureza 99.9 % atómico), Y (99.9 % atómico) y Co (99.99 % atómico) a una presión de Ar+ de 2.9 x 10-3 mbar. Todas las muestras tienen una capa protectora de 3.5 nm de grosor y una capa de transición, directamente sobre el sustrato, de 5 nm de grosor, ambas de Al. Su composición ha sido estimada mediante medidas de fluorescencia de rayos X obtenidas en una microsonda electrónica (EPMA, modelo CAMECA SX-100) de los Servicios Científico-Técnicos de la Universidad de Oviedo. Las propiedades magnéticas se han determinado utilizando dos métodos complementarios. En primer lugar, medidas de magnetometría por muestra vibratoria (VSM) con campos magnéticos perpendiculares a la superficie (hasta 9 T) y mediante un dispositivo superconductor de interferencia cuántica (SQUID), con campos paralelos y perpendiculares a la superficie de la muestra (hasta 6 T), han dado cuenta del comportamiento magnético global del sistema entre 5 K y 300 K. Por otro lado, ciclos de histéresis específicos del Dy y del Co se han obtenido mediante XMCD (hasta 6 T) utilizando radiación sincrotrón circularmente polarizada a energías correspondientes a los bordes M5 del Dy y L3 del Co. Tanto en el caso del DyCo5 como del YCo5, se han crecido dos tipos de muestras. En el primer caso, muestras denominadas S, se han encendido simultáneamente ambos blancos de Dy y Co hasta completar los 35 nm de grosor. En el segundo caso, muestras denominadas A, se han ido encendiendo y apagando alternativamente los blancos de Dy y de Co, preparando capas puras alternas de Dy y de Co con grosores nominales en el entorno de la monocapa, pero con una composición neta promedio y espesor final similares a los de la muestra DyCoS. Las medidas de composición indican que ambas muestras están en torno a la estequiometría esperada, con una diferencia del 1-2 % atómico. El mismo proceso de crecimiento se ha llevado a cabo con las muestras de referencia de YCo5., [Resultados]: Las medidas de magnetometría realizadas con campos aplicados en el plano y fuera del plano de la lámina indican que las muestras de DyCo5 tienen anisotropía perpendicular, mientras que las de YCo5 carecen de ella. Teniendo en cuenta que el YCo5 y el DyCo5 tienen una estructura atómica y un entorno químico similares, con la salvedad de que el Y es no magnético y el Dy sí lo es, se puede concluir que el Co no es el causante de la anisotropía perpendicular observada en las muestras de DyCo5. Además, se observa que los campos coercitivos perpendiculares aumentan al enfriar, en buen acuerdo con lo esperado en modelos de anisotropía aleatoria y canje. Se confirma el comportamiento ferrimagnético de las aleaciones con temperaturas de compensación de 120 K para la muestra DyCoS y 90 K para la lámina DyCoA. La diferencia en el valor de temperatura de compensación puede deberse a la ligera modificación de la composición mencionada anteriormente, puesto que en este tipo de materiales se ha observado que variaciones muy leves de composición, en torno al 1 % atómico, generan cambios de la temperatura de compensación de varias decenas de K. Por otro lado, los ciclos XMCD selectivos al elemento tienen sentidos opuestos para el caso del Dy y del Co. Además, se observan pendientes en los ciclos compatibles con la presencia de una distribución de momentos magnéticos en forma de conos, de acuerdo con lo esperado en aleaciones esperimagnéticas. La evolución de estos ciclos en función de la temperatura confirma la inversión de la orientación de los momentos magnéticos del Dy y del Co a ambos lados de la temperatura de compensación y sugiere cambios en la estructura de los conos observados a medida que se enfría el sistema., Este trabajo ha sido financiado por el proyecto MINECO FIS2013-45469. C. B.-R. agradece financiación a través del programa JAE-Predoc del CSIC. A. H.-R. y J. M. T. agradecen la financiación de la FCT Portuguesa (Refs. SFRH/BPD/90471/2012 y SFRH/BPD/72329/2010)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tuning interfacial domain walls in GdCo/Gd/GdCo' spring magnets

  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Vélez, María
  • Alameda, J. M.
  • Martín, José Ignacio
Resumen del póster presentado a la XXXV Reunión Bienal de la Real Sociedad Española de Física y al 25º Encuentro Ibérico de Enseñanza de la Física, celebrados en Gijón (España) del 13 al 17 de julio de 2015.-- et al., Exchange coupled multicomponent ―spring-magnet” systems that combine ferrimagnetic and ferromagnetic materials are the focus of a renewed interest due to their potential as recording media with tailored magnetic behavior. Different geometries such as thin film heterostructures, coreshell nanoparticles or hard/soft lateral nanocomposites are employed in order to optimize system properties for specific applications. In particular, amorphous ferrimagnetic Rare Earth (RE) - Transition Metal (TM) alloys, with their strongly temperature dependent magnetic properties allow to tune important parameters such as spin polarization and magnetic moments and multilayers based in these ferrimagnetic alloys have been used to produce different magnetic behaviors such as macroscopic ferrimagnet states, macroscopic spin-flip like metamagnetic states or giant exchange bias. In these systems, exchange coupling gives rise to interfacial domain walls (DW) that govern the full magnetic behavior of the multicomponent system. GdxCo1-x amorphous alloys are RE-TM ferrimagnetic materials where the Gd and Co moments are antiferromagnetically coupled and collinear. Depending on the composition and temperature, the net magnetization in these alloys can be aligned either with the Co or the Gd moments. Therefore, it is possible to prepare exchange coupled GdxCo1-x/GdyCo1-y bilayers in which the net magnetization of each of the layers is dominated by a different kind of magnetic moments (i.e., by the Gd or Co moments). Interfacial exchange coupling between Co atoms at each layer results in the antiparallel alignment of the magnetization in each of them at remanence. Then, in the presence of an in-plane magnetic field of increasing magnitude, the system must switch to a parallel magnetization configuration and a Bloch wall across the thickness is created at the interface. The extension, position and symmetry of these walls respect to the interface plane, and their field and temperature dependence control the characteristic switching fields in the hysteresis loop. In this work, we have prepared GdxCo1-x/Gd/GdyCo1-y trilayers by sputtering in which a Gd layer with variable thickness is introduced at the interface in order to modulate the strength of the ―spring magnet” effect in the system. As Gd thickness increases from 0 to 30 nm, coupling between the upper GdxCo1-x and lower GdyCo1-y layers weakens due to the much smaller Gd-Gd exchange interactions in comparison with Co-Co exchange. Magnetooptical Kerr effect hysteresis loops (sensitive to Co magnetization at the upper layer) show that, as a consequence, the characteristic fields for nucleation of DWs across the thickness are reduced and the ―spring-magnet” effect becomes restricted to a lower temperature range., X-ray resonant magnetic scattering (XRMS) measurements at APS Argonne NL have been used to determine the depth profile of Gd magnetic moments configuration as a function of applied magnetic field. Figure 1 shows XRMS data at 50 K for a 50 nm Gd35Co65/8 nm Gd/50 nm Gd11Co89 trilayer at different applied fields (either with or without interfacial DW). Fitted magnetization depth profiles of XRMS reflectivity data in a 50 nm Gd35Co65/50 nm Gd11Co89 bilayer show clear asymmetries in DW width at each side of the interface (9.4 nm at Gd11Co89 vs. 2.2 nm at Gd35Co65), in agreement with the different saturation magnetization in each layer. In the trilayers, this asymmetry is enhanced and the DW becomes localized at the Gd/Gd11Co89 interface in which Gd-Gd exchange interactions determine the strength of the effective ―spring-magnet”., Work supported by Spanish MINECO under grants FIS2008-06249 and FIS2013-45469. Work at Argonne was supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Topological defects in weak perpendicular magnetic anisotropy nanostructures

  • Vélez, María
Resumen del trabajo presentado al International Workshop on Vortex Matter in Superconductors, celebrado en El Escorial, Madrid (España) del 10 al 15 de mayo de 2015., Complex spin textures found in different kinds of magnetic systems can be described in terms of topological defects in the magnetization such as vortices in magnetic dots, half vortices and domain walls in nanowires, dislocations and disclinations in weak stripe domains or skyrmions in helical magnets. These magnetic defects usually present an enhanced stability due to their non-trivial topology which makes them interesting for magnetic logic and memory devices. Also, interplay between complex magnetic configurations and superconductivity provides a rich playground to tune the phase diagram of superconducting/magnetic hybrids. In this work, we present a study of topological defects in weak perpendicular magnetic nanostructures fabricated by e-beam lithography and sputtering on amorphous Nd-Co films and multilayers. First, periodic film thickness modulations have been used to fabricate lateral magnetic multilayers in the magnetic stripe domain pattern. During inplane hard axis magnetization reversal, magnetic stress at the interfaces leads to the dissociation of high-Burgers vector dislocations into ½ disclination pairs. Coupling between in-plane closure domain structure and ½ disclinations leads to the nucleation of arrays of ½ skyrmion (meron) magnetic textures (see Fig. 1) depending on magnetic history and nanostructure geometry. Then, micromagnetic simulations and microscopy techniques have been used to analyse the conditions for magnetic meron nucleation and propagation during magnetization reversal of extended thin films and multilayers of weak perpendicular anisotropy materials., Work supported by Spanish MINECO (FIS2013-45469)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Películas nanoestructuradas de PS-b-P4VP con ácido fórmico

  • Losada Ambrinos, Raquel
Memoria realizada en el Departamento de Química Orgánica e Inorgánica de la Universidad de Oviedo como Trabajo Fin de Máster en Química y Desarrollo Sostenible., Este trabajo ha sido financiado con cargo al proyecto: FIS2013-45469., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Absence of magnetic proximity effects in magnetoresistive Pt/CoFe2O4 hybrid interfaces

  • Valvidares, Manuel
  • Dix, Nico
  • Sánchez Barrera, Florencio
  • Fontcuberta, Josep
Valvidares, Manuel et al., Ultrathin Pt films grown on insulating ferrimagnetic CoFe2O4 (111) epitaxial films display a magnetoresistance upon rotating the magnetization of the magnetic layer. We report here x-ray magnetic circular dichroism (XMCD) recorded at Pt-L2,3 and Pt-M3 edges. The results indicate that the Pt magnetic moment, if any, is below the detection limit (<0.001μB/Pt), thus strongly favoring the view that the presence of CoFe2O4 does not induce the formation of magnetic moments in Pt. Therefore, the observed magnetoresistance cannot be attributed to some sort of proximity-induced magnetic moments at Pt ions and subsequent magnetic-field dependent scattering. It thus follows that either bulk (spin Hall and inverse spin Hall effects) or interface (Rashba) spin-orbit related effects dominate the observed magnetoresistance. Furthermore, comparison of bulk magnetization and XMCD data at (Fe,Co)-L2,3 edges suggests the presence of some spin disorder in the CoFe2O4 layer which may be relevant for the observed anomalous nonsaturating field dependence of spin Hall magnetoresistance., This work is supported by the European Union under the NMP project (263104-HINTS) and the European Research Council (257654-SPINTROS). The financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and the projects (MAT2012-37638, MAT2014-56063-C2-1-R, FIS2013-45469-C4-3-R, MAT2014-59315-R and MAT2015-65159-R) and by the Catalan Government (2014 SGR 734) are acknowledged. M. I. acknowledges the Basque Government for a PhD fellowship (BFI-2011-106). Beam time access at ESRF and ALBA facilities, at beamlines ID12 and BL29 respectively, is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Emerging Diluted Ferromagnetism in High- Tc Superconductors Driven by Point Defect Clusters

  • Gázquez, Jaume
  • Guzmán, Roger
  • Coll, Mariona
  • Palau, Anna
  • Puig Molina, Teresa
  • Obradors, Xavier
Gázquez, Jaume et al., Defects in ceramic materials are generally seen as detrimental to their functionality and applicability. Yet, in some complex oxides, defects present an opportunity to enhance some of their properties or even lead to the discovery of exciting physics, particularly in the presence of strong correlations. A paradigmatic case is the high-temperature superconductor YBa2Cu3O7-δ (Y123), in which nanoscale defects play an important role as they can immobilize quantized magnetic flux vortices. Here previously unforeseen point defects buried in Y123 thin films that lead to the formation of ferromagnetic clusters embedded within the superconductor are unveiled. Aberration-corrected scanning transmission microscopy has been used for exploring, on a single unit-cell level, the structure and chemistry resulting from these complex point defects, along with density functional theory calculations, for providing new insights about their nature including an unexpected defect-driven ferromagnetism, and X-ray magnetic circular dichroism for bearing evidence of Cu magnetic moments that align ferromagnetically even below the superconducting critical temperature to form a dilute system of magnetic clusters associated with the point defects., J.G. and R.M. contributed equally to this work. Authors acknowledge the MICIN (NANOSELECT, CSD2007-00041 and MAT2014-51778- C2-1-R), Generalitat de Catalunya (2014SGR 753 and Xarmae), and the EU (EU-FP7 NMP-LA-2012-280432 EUROTAPES project and Cost Action MP1201). They also acknowledge MINECO for the Center of Excellence award Severo Ochoa (SEV-2015-0496). Work at ORNL was supported by the US DOE Offi ce of Basic Energy Sciences, Materials Sciences and Engineering Division (M.V., S.J.P.) and by the Scientifi c User Facilities Division. Some of the electron microscopy work had also been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Instituto de Nanociencia de Aragon (INA) at the University of Zaragoza. Work at INA-LMA was supported by NanoAraCat. Research at UCM (J.S.) was supported by the ERC starting Investigator Award, grant no. 239739 STEMOX and Juan de la Cierva Program JCI-2011- 09428 (MICINN-Spain). The XMCD experiments were performed at the BOREAS beamline of the ALBA Synchrotron Light Facility with the collaboration of ALBA staff. M.V., E.P., and P.G. acknowledge funding by MINECO through programa Retos de la Sociedad ( FIS2013-45469- C4-3-R ). Research at Vanderbilt was supported by the U.S. DOE grant DE-FG02-09ER46554 and the McMinn Endowment. Computations were supported by the NERSC (U.S. DOE, DE-AC02-05CH11231). J.G. and M.C. also acknowledge the Ramon y Cajal program (RYC-2012-11709 and RYC-2013-12448, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Switchable field-tuned control of magnetic domain wall pinning along Co microwires by 3D e-beam lithographed structures

  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Rodríguez-Rodríguez, G.
  • Vélez, María
  • Martín, José Ignacio
  • Alameda, J. M.
Three-dimensional magnetic circuits composed of Co microwires crossed by elevated Co bridges have been patterned on Si substrate by e-beam lithography and lift-off process. The lithographic procedure includes a double resist procedure that optimizes the shape of the bridge, so that 200 nm air gaps can be routinely achieved in between the wire and bridge elements. Microwire magnetization reversal processes have been analyzed by magneto-optical Kerr effect microscopy with different remanent bridge configurations. When the Co bridge is magnetized along the in-plane direction parallel to the wire axis, its stray field induces a marked pinning effect on domain wall propagation along the wire below it, even without being in contact. Changing the sign of the remanent state of the bridge, domain wall pinning can be selected to occur in either the ascending or descending branches of the wire hysteresis loop. Thus, these wire-bridge 3D circuits provide a simple system for tunable domain wall pinning controllable through the pre-recorded bridge remanent state., Work supported by Spanish MINECO under Grants FIS2008-06249 and FIS2013-45469. C. Blanco-Roldán acknowledges support from CSIC JAE Predoc program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Observation of asymmetric distributions of magnetic singularities across magnetic multilayers

  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Blanco-Roldán, C.
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Whereas a great deal of work is being devoted to magnetic singularities in two-dimensional (2D) systems (surfaces, interfaces, films) due to their possible applications, much less is known about their properties along the perpendicular direction. Here, we report on a pronounced asymmetry of the in-depth distribution of meronlike magnetic textures, which are magnetic singularities similar to skyrmions, in magnetic layers. Meron textures are observed to be distributed in two groups defined by their topology. One of them resides almost exclusively at the top surface of the film and the other at the bottom one. This observation has been brought to light with element-specific magnetic transmission soft x-ray microscopy. Micromagnetic simulations reveal that closure domains are at the origin of this asymmetry. The result might be of general interest for controlling magnetic three-dimensional (3D) architectures., This paper was supported by Spanish Ministerio de Economía y Competitividad (MINECO; Grants No. FIS2013-45469 and No. FIS2016-76058) and by Fundacion para el Fomento en Asturias de la Investigacion Científica Aplicada y la Tecnología (FICYT-Asturias; Grant No. FC-15-GRUPIN14-040). A.H.-R. acknowledges support from Fundaçao para a Ciencia e a Tecnologia (FCT) of Portugal (Grant No. SFRH/BPD/90471/2012). C.B.-R. appreciates support from CSIC Junta para la Ampliacion de Estudios (JAE) Predoc Program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Perpendicular magnetic anisotropy in amorphous NdxCo1-x thin films studied by x-ray magnetic circular dichroism

  • Cid, Rosalía
  • Alameda, J. M.
  • Valvidares, S. M.
  • Cezar, J. C.
  • Bencok, P.
  • Brookes, N. B.
  • Díaz, Javier
The origin of perpendicular magnetic anisotropy (PMA) in amorphous NdxCo1-x thin films is investigated using x-ray magnetic circular dichroism (XMCD) spectroscopy at the Co L2,3 and Nd M4,5 edges. The magnetic orbital and spin moments of the 3d cobalt and 4f neodymium electrons were measured as a function of the magnetic field orientation, neodymium concentration, and temperature. In all the studied samples, the magnetic anisotropy of the neodymium subnetwork is always oriented perpendicular to the plane, whereas the anisotropy of the orbital moment of cobalt is in the basal plane. The ratio Lz/Sz of the neodymium 4f orbitals changes with the sample orientation angle, being higher and closer to the atomic expected value at normal orientation and smaller at grazing angles. This result is well explained by assuming that the 4f orbital is distorted by the effect of an anisotropic crystal field when it is magnetized along its hard axis, clearly indicating that the 4f states are not rotationally invariant. The magnetic anisotropy energy associated to the neodymium subnetwork should be proportional to this distortion, which we demonstrate is accessible by applying the XMCD sum rules for the spin and intensity at the Nd M4,5 edges. The analysis unveils a significant portion of neodymium atoms magnetically uncoupled to cobalt, i.e., paramagnetic, confirming the inhomogeneity of the films and the presence of a highly disordered neodymium rich phase already detected by extended x-ray-absorption fine structure (EXAFS) spectroscopy. The presence of these inhomogeneities is inherent to the evaporation preparation method when the chosen concentration in the alloy is far from its eutectic concentrations. An interesting consequence of the particular way in which cobalt and neodymium segregates in this system is the enhancement of the cobalt spin moment which reaches 1.95 μB in the sample with the largest segregation., Work supported by Ministerio de Economía y Competitividad (Gobierno de España) (Spain) grants #FIS2013-45469 and FIS2016-76058. R. Cid acknowledges support from Spanish Ministerio de Educación y Cultura (MEC) (Gobierno de España) under FPU grant. M.Valvidares acknowledges a MEC (Gobierno de España) grant for Specialization in International Organizations, ES-2004-0153., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic stripes and holes: Complex domain patterns in perforated films with weak perpendicular anisotropy

  • Valdés-Bango, F.
  • Vélez, María
  • Álvarez-Prado, L. M.
  • Alameda, J. M.
  • Martín, José Ignacio
Hexagonal antidot arrays have been patterned on weak perpendicular magnetic anisotropy NdCo films by e-beam lithography and lift off. Domain structure has been characterized by Magnetic Force Microscopy at remanence. On a local length scale, of the order of stripe pattern period, domain configuration is controlled by edge effects within the stripe pattern: stripe domains meet the hole boundary at either perpendicular or parallel orientation. On a longer length scale, in-plane magnetostatic effects dominate the system: clear superdomains are observed in the patterned film with average in-plane magnetization along the easy directions of the antidot array, correlated over several antidot array cells., Work supported by Spanish MINECO under grant FIS2013-45469., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deterministic propagation of vortex-antivortex pairs in magnetic trilayers

  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Valcárcel, Ricardo
  • Estébanez, Irene
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Thin perpendicular magnetic anisotropy films between two soft ferromagnetic layers have the nuclei for magnetization inversion at the bifurcations of their characteristic stripe domain pattern. The inverted nuclei induce vortex-antivortex pairs in the soft magnetic layers that exhibit a correlated motion extending several μm along the magnetic stripes during magnetization reversal. The sense of motion is completely determined by the topology of the magnetic bifurcations causing vortex-antivortex pairs to propagate in opposite senses depending on their polarities. This is a robust effect that might have practical applications. These findings are based on X-ray microscopy and micromagnetic calculations., This work was supported by Spanish MINECO [Grant Nos. FIS2013–45469 and FIS2016–76058 (AEI/FEDER, EU)] and FICYT-Asturias (FC-GRUPIN14–040). A. Hierro Rodriguez acknowledges support from FCT of Portugal (Grant No. SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

2D magnetic domain wall ratchet: The limit of submicrometric holes

  • Herrero-Albillos, Julia
  • Castán-Guerrero, C.
  • Valdés-Bango, F.
  • Bartolomé, Juan
  • Bartolomé, Fernando
  • Kronast, Florian
  • Hierro-Rodríguez, Aurelio
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Vélez, María
  • Alameda, J. M.
  • Sesé Monclús, Javier
  • García, L. M.
The study of ratchet and crossed-ratchet effects in magnetic domain wall motion through 2D arrays of asymmetric holes is extended in this article to the submicrometric limit in hole size (small size regime). Therefore, the gap has been closed between the 2D ratchets in the range of tens-of-micrometers (large size regime) and the small size regime 1D ratchets based on nanowires. The combination of Kerr microscopy, X-ray PhotoEmission Electron Microscopy and micromagnetic simulations has allowed a full magnetic characterisation of both the domain wall (DW) propagation process over the whole array and the local DW morphology and pinning at the holes. It is found that the 2D small size limit is driven by the interplay between DW elasticity and half vortex propagation along hole edges: as hole size becomes comparable to DW width, flat DW propagation modes are favoured over kinked DW propagation due to an enhancement of DW stiffness, and pinned DW segments adopt asymmetric configurations related with Néel DW chirality. Nevertheless, both ratchet and crossed-ratchet effects have been experimentally found, and we propose a new ratchet/inverted-ratchet effect in the submicrometric range driven by magnetic fields and electrical currents respectively., The financial support of the Spanish MINECO MAT2014-53921-R, FIS2013-45469 and FIS2016-76058 (AEI) and the Aragonese DGA IMANAE34 and CAMRADSE69, all of them cofunded by Fondo Social Europeo and European Union FEDER funds, is acknowledged. A. H-R acknowledges the support from FCT of Portugal (Grant SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CISNE: An accurate description of dose-effect and synergism in combination therapies

  • García-Fuente, Amador
  • Vázquez, Fernando
  • Viéitez, José M.
  • García Alonso, F. J.
  • Martín, José Ignacio
  • Ferrer, Jaime
The precise determination of dose-effect curves and the combination effect of drugs is of crucial importance in the development of new therapies for the most dreadful diseases. We have found that the current implementations of the theory of Chou et al. are not accurate enough in some circumstances and might lead to erroneous predictions of synergistic or antagonistic behaviour. We have identified the source of inaccuracies and fixed it thereby improving the accuracy of those methods. Here we explain the main features of our approach and demonstrate its higher accuracy as compared to the standard methods. Therefore, this new implementation might have a huge impact in the reliability of future research on new Combination Therapies., This work was supported by FICYT (grant GRUPIN14-121) and by the Spanish MINECO (project FIS2013-45469)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cycloidal domains in the magnetization reversal process of Ni80Fe20/Nd16Co84/Gd12Co88 trilayers

  • Quirós, Carlos
  • Hierro-Rodríguez, Aurelio
  • Sorrentino, Andrea
  • Valcárcel, Ricardo
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
The magnetization reversal of each individual layer in magnetic trilayers (permalloy/NdCo/GdCo) is investigated in detail with x-ray microscopy and micromagnetic calculations. Two sequential inversion mechanisms are identified. First, magnetic vortex-antivortex pairs move along the field direction while inverting the magnetization of magnetic stripes until they are pinned by defects. The vortex-antivortex displacements are reversible within a field interval which allows their controlled motion. Second, as the reversed magnetic field increases, cycloidal domains appear in the permalloy layer as a consequence of the dissociation of vortex-antivortex pairs due to pinning. The field range where magnetic vortices and antivortices are effectively guided by the stripe pattern is of the order of tens of mT for the NiFe layer, as estimated from the stability of cycloid domains in the sample., Work supported by Spanish MINECO [Grants No. FIS 2013-45469 and No. FIS2016-76058 (AEI/FEDER,EU)] and by FICYT-Asturias (Grant No. FC-GRUPIN14-040). We thank J. Avila (Alba staff) for assistance in the pulsed magnetic field set up. We thank Unidad de Medidas magnéticas y RMN de Sólidos de los Servicios Cientifico Técnicos of Universidad de Oviedo for the VSM characterization. A.H.-R. acknowledges the support from European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska-Curie Grant No. H2020-MSCAIF-2016-746958., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polymer porous thin films obtained by direct spin coating

  • Álvarez-Fernández, Alberto
  • Valdés-Bango, F.
  • Losada Ambrinos, Raquel
  • Martín, José Ignacio
  • Vélez, María
  • Alameda, J. M.
  • García Alonso, F. J.
Films of four different nanostructures, namely micelles, filled cylinders, ring-shaped porous nanostructures and hollow cylinders, can be prepared easily in a straightforward and simple way by spin coating onto a silicon plate toluene solutions of poly(styrene-block-4-vinylpyridine) copolymer containing formic acid of increasing concentration. Despite the enormous progress in preparation of porous polymers, most of them require multiple steps. In this sense, this method represents an effort to obtain not only porous thin films but also other bidimensional nanostructures in a very simple way. © 2017 Society of Chemical Industry., This work was supported by Spanish MINECO (FIS2013‐45469 and FIS2016‐76058 (AEI/FEDER,EU))., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Quantitative X-ray magnetic microscopy: from parallel stripe domains to buried topological defects

  • Vélez, María
  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Valdés-Bango, F.
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
  • Hierro-Rodríguez, Aurelio
  • Duch Llobera, Marta
  • Torras Andrés, Núria
  • Esteve i Tintó, Jaume
  • Sorrentino, Andrea
  • Valcárcel, Ricardo
  • Pereiro, Eva
  • Ferrer, Salvador
Resumen del trabajo presentado al APS March Meeting, celebrado en Baltimore, Maryland (USA) del 14 al 18 de marzo de 2016., Magnetic transmission X-ray microscopy (TXM) is a powerful imaging technique that can produce element specific images of magnetic domains with nanometric lateral resolution. Here we present a novel imaging method in which the angular dependence of the magnetic contrast in a series of high resolution TXM images is used to obtain quantitative descriptions of the magnetization (canting angles and sense). This has been applied first to analyze parallel stripe domains in weak perpendicular anisotropy ferromagnetic NdCo5 layers of different thickness, and in NdCo5/Permalloy bilayers. Then, our method has been used to identify complex topological defects (merons or 1/2 skyrmions) in a NdCo5 film that are only partially replicated by the Permalloy overlayer. Meron propagation in trilayers (across the thickness) and in hexagonal networks (across bifurcations) will be discussed in terms of their topological characteristics (chirality and polarity)., Work supported by Spanish grant FIS2013-45469., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Frustration and topological defects in hexagonal networks with weak Perpendicular Magnetic Anisotropy

  • Valdés-Bango, F.
  • Vélez, María
  • Martín, José Ignacio
  • Álvarez-Prado, L. M.
  • Alameda, J. M.
Resumen del trabajo presentado al Joint European Magnetic Symposia (JEMS), celebrado en Glasgow (UK) del 21 al 26 de agosto de 2016., An artificial spin ice is an array of nanomagnets that exhibit frustrated magnetic states due mainly to their magnetostactic interactions, and so highly dependent on the lattice geometrical features, with typical lateral dimensions of hundreds of nanometers. Despite it has been a lot of effort over the past decade to construct and understand the static and dynamic behaviour of such systems on magnetical materials with in-plane anisotropy (e.g. permalloy or cobalt) few has been explored on out-of-plane anisotropic materials. In our experiment, we study this through amorphous alloy NdCo5 which exhibits an stripe phase weak out-of-plane domain behaviour, that also allows us for a direct observation of magnetic domain reversal. Sets of continuous kagome lattices were fabricated by electron-beam lithography and further magnetron sputtering deposition. To analyze the role of the out-of-plane anisotropy, a 65 nm thick NdCo5 layer and an analogous 40nm thick Co sample were deposited. To avoid edge effects and to guarantee enough number of elements lattices, the size of the array area is over 200x200 μm2. In order to study size related effects branch width was varied in the range 0.3-3 μm and three increasing length/widht aspect ratios were studied for each case. Magnetic behaviour was characterized by Magnetic Force Microscopy and Magneto-Optical Kerr Effect and a set of micromagnetic simulations were launched to support the observations. Different kinds of topological defects are found to nucleate in these hexagonal networks depending on bar aspect ratio and width in comparison with stripe domain spatial periodicity, and on magnetic history. For bar widths below 400 nm a spin ice regime is found after out of plane demagnetization. The interplay between shape anisotropy, rotatable anisotropy, size effects and geometrical frustration will be discussed in order to understand the experimental results., Work supported by Spanish MINECO (FIS2013-45469)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Asymmetric merons at room temperature: experiments and simulations

  • Álvarez-Prado, L. M.
  • Hierro-Rodríguez, Aurelio
  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Resumen del trabajo presentado al Joint European Magnetic Symposia (JEMS), celebrado en Glasgow (UK) del 21 al 26 de agosto de 2016., Topological defects are a key to understanding global properties in many different condensed matter systems with long range order. Although artificial skyrmion textures (with integer topological index Q = 1) have been imprinted in multilayers, related topological defects with fractional skymionic charge Q 0 1/2 (socalled merons) have also been described and observed. Actually meron textures bound to magnetic stripe domain pattern dislocation cores have been recently observed in weak perpendicular anisotropy NdCo/Py bilayers supporting a weak stripe domain pattern at equilibrium. In this work, we have extended our previous study by performing a detailed characterization of the 3D micromagnetic structure of meron textures in GdCo/NdCo/Py trilayers. Magnetic Transmission X-Ray microscopy (MTXM) at different sample orientations has been used to obtain the magnetic configration of the bottom/top/central layers around these merons, taking advantage os its long penetration depth to study buried layers and the possibility to obtain independently elements selective images of each layer magnetization. A detailed analysis shows that most merons appear either on top or bottom layers but not on both at the same time. This asymmetric indepth configuration follows strong selection rules based on defect topological characteristics which will be outlined and discussed in terms of micromagnetic simulations., Work supported by Spanish MINECO (FIS2013-45469, FC-15GRUPIN14-040) and FCT of Portugal (Grant SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reconfigurable exchange bias-like effect in hybrid hard/soft patterned magnetic composites

  • Hierro-Rodríguez, Aurelio
  • Teixeira, J. M.
  • Rodríguez-Rodríguez, G.
  • Rubio, Honorino
  • Vélez, María
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
Resumen del trabajo presentado al Joint European Magnetic Symposia (JEMS), celebrado en Glasgow (UK) del 21 al 26 de agosto de 2016., Reconfigurable magnetic systems are attracting growing interest due to their potential in the development of forefront magnetic devices. One way to dreate the reconfigurability is by applying external fields and/or changing the magnetic history of the system, controlling in this way, the dynamic and/or static magnetic behavior without changing the shapes/sizes of the structures. Here we present a hybrif 2D hard-soft composite fabricated by combining soft (Co73Si27) and hard (NdCo5) magnetic materials with in-plane and out-of-plane magnetic anisotropies, respectively. They have been microstructured in a square lattice of CoSi anti-dots with NdCo dots within the holes. The magnetic properties of the dots allow us to introduce a magnetostatic interactions between dot and anti-dot layers induce a completely reconfigurable exchange bias-like shift in the system's hysteresis loops. Two different regimes for this shift are present depending on the lattice parameter of the microstructures. For large values, dipolar magnetostatic decay is observed with a small bias field shift. For the smaller lattice parameter, the interaction between adjacent anti-dot's characteristic closure domain structures enhances the exchange bias-like effect., Wotk supported by Spanish MINECO (FIS2013-45469) and FCT of Portugal (Grants SFRH/BPD/90471/2012 and SFRH/BPD/72329/2010)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Asymmetric merons studied by magnetic transmission X-ray microscopy

  • Hierro-Rodríguez, Aurelio
  • Álvarez-Prado, L. M.
  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Resumen del trabajo presentado a la 61st Annual Conference on Magnetism and Magnetic Materials, celebrada en New Orleans (USA) del 31 de octubre al 4 de noviembre de 2016., Meron textures are topological deffects with fractional skyrmionic charge Q = 1/2 that have been recently observed bound to magnetic stripe domain pattern dislocation cores in weak perpendicular anisotropy NdCo/Py bilayers supporting a weak stripe domain pattern at equilibrium. In this work, we go an step further by studying the in-depth transmission of merons in GdCo/NdCo(Py trilayers. Taking advantage of the element selectivity, long probing depth and magnetic sensitivity of sinchtroton based magnetic x-ray transmission microscopy, a detailed charcterization of the 3D topology of the merons formed in the system during the magnetization reversal process has been carried out. The results indicate an asymmetric confguration of merons across the thickness, as most merons appear either on top or bottom layers but not on both at the same time. This asymmetric propagation follows will be described and discussed., Wotk supported by Spanish MINECO (FIS2013-45469), Spanish FYCIT (FC-15GRUPIN14-040) and FCT of Portugal (Grants SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reconfigurable magnetic domain-wall device: Fabrication and simulations

  • Hierro-Rodríguez, Aurelio
  • Álvarez-Prado, L. M.
  • Vélez, María
  • Martín, José Ignacio
  • Alameda, J. M.
  • Teixeira, J. M.
  • Araújo, J. P.
Resumen del trabajo presentado a la 43rd International Conference on Micro and Nano Engineering (MNE), celebrada en Braga (Portugal) del 18 al 22 de septiembre de 2017., The design of ultra-dense, low-cost and low-power technologies is one of the current challenges belonging to future Nanoscience and Nanotechnology breakthroughs. They represent advances which can qualitatively improve Information Technologies and strongly impact in the nowadays society. Among other important topics, the research on novel magnetic systems is a key factor to successfully accomplish these challenges. In this framework the present work moves in the direction of reconfigurable magnetic devices: systems where the response of the device can be controlled through an external agent. In the present work, a hybrid device based on the racetrack idea, is micromagnetically simulated and fabricated to control the propagation of domain walls (DW) through a Magnetic Nanowire (MNW). Simulations are performed using the Mumax3 code, and the system is fabricated by multilevel electron beam lithography procedures. A 75000x500x12 nm3 Co MNW is defined in contact with a μm diameter disc. The later acts as the magnetic domain nucleation region for the MNW. Disc shaped structures with 3 μm in diameter are defined in a different lithography step around the MNW. These discs are fabricated with amorphous NdCo5, a weak Perpendicular Magnetic Anisotropy (PMA) material. To allow magnetoresistive characterization, six Cu paths are defined in the last fabrication step on top of the previously fabricated system. The key factor for the novel functionality (“Reconfigurability”) of the proposed device is the difference between the magnetic properties of the weak PMA elements and the MNW. Specifically, the larger coercive field exhibited by the NdCo5 discs allows the DW propagation by the application of biasing fields and/or polarized currents through the MNW, without changing their magnetization configuration. In this way, the discs present a non-volatile memory which can be pre-configured by changing the magnetic history. Depending on the magnetic state recorded in the discs, different magnetostatic fields are present in the vicinity of the MNW locally leading to controllable pinning effects acting on the DW. The simulation results show that the proposed device is sensitive to the chirality of the Néel transverse DWs leading to filtering/rectifying capabilities., Work supported by Portuguese FCT (grant PTDC/FIS/119027/2010 (FCOMP-01-0124-FEDER-020713)), by Spanish MINECO (grants FIS2013-45469 and FIS2016-76058 (AEI/FEDER, EU)) and by Spanish Nanolito Network (MAT2015-69725-REDT). A. Hierro-Rodriguez acknowledges support from FCT of Portugal (Grant No. SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Three dimensional magnetic textures studied by angular dependent transmission X-ray magnetic microscopy

  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Álvarez-Prado, L. M.
  • Díaz, Javier
  • Valcárcel, Ricardo
  • Alameda, J. M.
  • Vélez, María
  • Martín, José Ignacio
  • Pereiro, Eva
  • Ferrer, Salvador
Resumen del trabajo presentado a la 62nd Annual Conference on Magnetism and Magnetic Materials (MMM), celebrada en Pittsburgh (USA) del 6 al 10 de noviembre de 2017., Transmission X-ray microscopy combined with circular magnetic dichroism allows to get insight in the 3D magnetic configuration of thinfilms or multilayers as reported in our previous works. In order to advance towards the development of 3D magnetic tomography as a tool to resolve the magnetization in relatively complex magnetic structures, we acquired images at different angles of incidence and measured their X-ray dichroic contrast. we fabricated trilayers, consisting of two permalloy (Py) films having a Cu spacer in between, to ivestigate the textures of the two Py layers. As shown in the figure, at oblique angles of incidence, white (top) and dark (bottom) triangular areas visible in image (a) that invert contrast in (c). They are due to Landau domains at the top Py layer which are superimposed to the stripe domains of the thicker Py layer at the bottom, which are most evident in image (b). This interpretation is sustained by the results of micromagnetic calculations displayed in (d) and (e)., Work supported by Spanish MINECO (grants FIS2013-45469 and FIS2016-76058 (AEI/FEDER,EU)) and by FICYT-Astrurias (FC-GRUPIN14-040). A. Hierro-Rodriguez acknowledges FCT of Portugal ( Grant SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Guided propagation of vortex - Antivortex pairs in permalloy/NdCo/GdCo trilayers

  • Hierro-Rodríguez, Aurelio
  • Quirós, Carlos
  • Sorrentino, Andrea
  • Valcárcel, Ricardo
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Alameda, J. M.
  • Pereiro, Eva
  • Vélez, María
  • Ferrer, Salvador
Resumen del trabajo presentado a la 62nd Annual Conference on Magnetism and Magnetic Materials (MMM), celebrada en Pittsburgh (USA) del 6 al 10 de noviembre de 2017., Correlated propagation of opposite polarity vortex-antivortex pairs has been obtained in magnetic trilayers combining soft magnetic layers (NiFe, GdCo) and weak perpendicular anisotropy (NdCo) materials. Stripe domains at the central NdCo layer provide both nucleation sites for reversed domains (at bifurcations within the periodic stripe pattern) and a confining potential with a preferred propagation direction. A detailed characterization by magnetic X-ray microscopy and micromagnetic simulations shows that reversed domains in the top NiFe layer nucleate at dislocation cores and expand by the propagation of opposite polarity vortex-antivortex pairs along the lines defined by the stripe pattern. Bifurcation geometry and stray field asymmetries restrict the possible vortexantivortex pairs at the top NiFe layer: vortices always nucleate at the central reversed stripe and, under the effect of an in-plane field, propagate in opposite senses depending on their polarity over μm long distances. This is a robust effect protected by the topological characteristics of stripe pattern dislocations and top/bottom closure domain asymmetry that may have practical applications. The possibility to tune vortex/antivortex chiralities by a proper choice of soft magnetic layers will also be discussed., Work supported by Spanish MINECO (FIS2013-45469 and FIS2016-76058 (AEI/FEDER,EU)) and by FICYT-Asturias (FC-GRUPIN14-040). A. Hierro-Rodriguez acknowledges support from FCT of Portugal (Grant SFRH/BPD/90471/2012)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Multicapas magnéticas

  • Estébanez, Irene
Doble grado física-matemáticas (Opción B)., Las multicapas magnéticas son estructuras artificiales formadas por láminas que contienen distintos elementos magnéticos. Debido a sus extraordinarias propiedades, han conseguido llamar la atención de la comunidad científica. El interés por este tipo de estructuras se remonta a las décadas de 1950 y 1960, cuando Louis Néel y sus colaboradores se embarcaron en el estudio de las propiedades físicas prensentes en láminas delgadas y multicapas. Estos primeros trabajos, abarcaron el estudio de paredes de tipo Bloch y Néel, acoplamientos entre láminas ferromagnéticas separadas por un espaciador no magnético, anisotropías por efectos de superficie y acoplamiento de materiales ferromagnéticos y antiferromagnéticos. Desde entonces, no han parado de publicarse artículos en un campo que, debido a la creciente mejora de técnicas de fabricación en alto vacío y ultra alto vacío, está en alza. Es más, no solo se han producido avances que permiten un crecimiento más controlado de láminas delgadas y multicapas, también se han mejorado las técnicas de caracterización estructural y magnética. Por ejemplo, el uso de rayos X de ángulo bajo ha proporcionado una herramienta muy útil para determinar las características de las distintas capas en una multicapa, como pueden ser su espesor o su rugosidad. Los sincrotrones suponen un paso adelante al proporcionar fuentes de rayo X con mayor brillantez que permiten nuevos métodos de análisis como la microscopía de rayos X o el análisis de la configuración magnética a partir de efectos de dicroismo. Todos estas nuevas técnicas, en su conjunto, han resultado en un mayor conocimiento de los fenómenos magnéticos. De todos estos nuevos fenómenos magnéticos descubiertos gracias al estudio de multicapas, hay uno que destaca sobre el resto. La magnetoresistencia gigante, GMR por sus siglas en inglés «Giant magnetoresistance», se ha convertido en uno de los hallazgos más importantes de las últimas décadas. Sus descubridores, los investigadores Albert Fert (París, Francia) y Peter Gruenberg (Julich, Alemania), notificaron, alrededor de 1985, y de manera independiente, la existencia de pruebas experimentales de un fenómeno de magnetoresistencia gigante. Tales fueron las implicaciones de esta revelación que, en 2007, ambos fueron galardonados con el Premio Nobel de Física. La industria del almacenamiento de datos es la mayor beneficia de la GMR. IBM fue la primera empresa en sacar al mercado discos duros basados en la tecnología GMR, y hoy en día todas las unidades de disco hacen uso de ella. Por último, se hace necesario destacar que el estudio de materiales magnéticos basados en multicapas simétricas y asimétricas resulta un paso previo y básico para el desarrollo de aplicaciones de grabado magnético de alta densidad., Este trabajo de Fin de Grado se engloba dentro de un proyecto de investigación de la Universidad de Oviedo: >Interacción y manipulación de defectos topológicos: nanoestructura y multicapas magnéticas>, financiado por el MINECO (MINECO-13-FIS2013-45469-C4-4-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Interacciones magnéticas en sistemas tierra rara-metal de transición y su estudio mediante técnicas de radiación sincrotrón, Magnetic interactions in rare earth - transition metal systems and their study by synchrotron radiation techniques

  • Blanco-Roldán, C.
Programa de Doctorado de Física de la Materia Condensada y Nanotecnología., En esta tesis se emplean, de manera intensiva, técnicas de caracterización experimental basadas en radiación sincrotrón para explorar las interacciones magnéticas de diferentes sistemas compuestos por elementos del grupo de las tierras raras y metales de transición (TR-MT), como son las aleaciones amorfas Gd-Co, Nd-Co, Dy-Co e Y-Co, conformadas como lámina continua, nanoestructuradas en forma de multicapa, o nanoestructuradas en diferentes geometrías mediante litografía por haz de electrones. Los sistemas TR-MT, de gran interés en el sector del almacenamiento y transmisión magnéticos de información, se caracterizan por poder presentar propiedades magnéticas como son una elevada anisotropía magnetocristalina perpendicular, una razonablemente intensa imanación, una alta temperatura de Curie, y la presencia de diferentes configuraciones entre los momentos magnéticos de la TR y el MT como consecuencia de la competición entre el canje y el campo cristalino aleatorio. Esta competición da lugar a configuraciones ferrimagnéticas y esperimagnéticas, dependiendo del momento orbital de la TR y de su acoplamiento (ferromagnético o antiferromagnético) con el MT. El balance energético entre la anisotropía magnética, el canje, la energía magnetostática y la energía Zeeman, cuando estas láminas delgadas son sometidas a un campo magnético externo, es estudiado a lo largo de los capítulos de esta tesis con el análisis de diferentes sistemas experimentales. Para ello, se han empleado numerosas técnicas de magnetometría y caracterización magnética convencionales, como la magnetometría por muestra vibrante (VSM), magnetometría de gradiente de campo alterno (AGM), magnetometría por dispositivo superconductor de interferencia cuántica (SQUID), efecto Kerr magneto-óptico, o la técnica de microscopía de fuerza magnética (MFM). Sin embargo, esta primera caracterización es completada con el uso de técnicas avanzadas de radiación sincrotrón, logrando obtener una mayor información acerca de los sistemas TR-MT, imposible de extraer con los anteriores métodos. Así, las técnicas sincrotrón, como son la dispersión magnética resonante (XRMS), el dicroísmo magnético circular (XMCD), y la microscopía de transmisión de rayos x (TXM), cobran gran importancia dentro de esta tesis, al presentar el potencial y capacidades de estas técnicas y ofrecer una descripción de su empleo y modo de análisis. De este modo, la tesis se compone de cuatro capítulos experimentales principales. El primero, tiene por objeto el estudio de multicapas compuestas por aleaciones de Gd-Co. La técnica de dispersión magnética resonante sirve para caracterizar el perfil de imanación de estas muestras, siendo sensible a la magnitud y variación en la orientación de los momentos magnéticos en profundidad, y mostrando los efectos de muelle de canje presentes con la aplicación de campo y observados, previamente mediante efecto Kerr magneto-óptico. A continuación, y siguiendo con el enfoque de resolución de momentos localizados, se lleva a cabo un estudio del magnetismo de muestras compuestas por una lámina continua de NdCo5 y bicapas NdCo5/Permalloy. Su estudio mediante microscopía de fuerza magnética y magnetometría de gradiente alterno es completado con la información angular de los momentos magnéticos de sus dominios de banda, cuya estimación solo es posible mediante microscopía de trasmisión de rayos x. Esta capacidad se muestra por primera vez en esta tesis. En el siguiente capítulo experimental, el patrón de bandas presente en el NdCo5 es truncado mediante la fabricación de microestructuras por litografía electrónica, explorando el uso de estos sistemas como circuitos magnéticos. En este marco, se han construido, además, estructuras tridimensionales en dos niveles mediante litografía electrónica, habiendo optimizado su proceso de fabricación y empleando en su caracterización técnicas como la microscopía de fuerza alterna o la microscopia por efecto Kerr. Por último, estas estructuras 3D, destinadas a su implementación como circuitos transmisores de información magnética, han mostrado su capacidad como elementos discriminadores de la propagación de los dominios magnéticos en microhilos según el signo del campo aplicado. Finalmente, en el último capítulo, se comienza el estudio de láminas continuas y multicapas de aleaciones amorfas de DyCo5, YCo5 y GdCo5, tanto por magnetometría por muestra vibrante y SQUID como por dicroísmo magnético circular, y se discuten las diferencias comparativas en su magnetismo debidas a la distinta tierra rara empleada además de a su distinta estructuración., Gracias al programa JAE Predoc del Consejo Superior de Investigaciones Científicas (CSIC), centro mixto de la Universidad de Oviedo, CSIC y Principado de Asturias que ha financiado la realización de esta tesis, haciendola posible. Agradezco también la financiación recibida desde el Ministerio de Ciencia e Innovación (MICINN) a través del proyecto FIS2008-062429, y desde el Ministerio de Economía y Competitividad (MINECO) mediante los proyectos FIS2013-45469 y FIS2016-76058., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring block copolymer nanoporous thin films with acetic acid as a small guest molecule

  • Álvarez-Fernández, Alberto
  • Valdés-Bango, F.
  • Martín, José Ignacio
  • Vélez, María
  • Quirós, Carlos
  • Hermida-Merino, Daniel
  • Portale, Giuseppe
  • Alameda, J. M.
  • García Alonso, F. J.
Block copolymers offer the fabrication of mesoporous thin films with distinct nanoscale structural features. In this contribution, we present the use of acetic acid (CH3COOH) as a low‐molecular‐weight guest molecule to tune the supramolecular assembly of poly[styrene‐block‐(4‐vinylpyridine)] (PS‐b‐P4VP), offering a versatile and straightforward method to obtain tailored nanostructured films with controlled topography and pore size. Spin‐coating toluene solutions of PS‐b‐P4VP, with a variable amount of CH3COOH, leads to micellar thin films, where the micelles contain the carboxylic acid as a guest molecule. The size can be conveniently modified in these films (from 48 to 75 nm) by varying the amount of organic acid in the starting solutions. Subsequent surface reconstruction of micellar films using ethanol leads to ring‐shaped copolymer nanoporous films with modulated diameter. Controlling the micelle reconstruction process, cylindrical porous films are also obtained. Interestingly, changing the type of aliphatic carboxylic acid leads to a modification of the observed film morphology from micelles to out‐of‐plane P4VP cylinders (or lamellae) in a PS matrix., This work was supported by Spanish MINECO (grants FIS2013‐45469 and FIS2016‐76058 (AEI/FEDER, EU))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene-based synthetic antiferromagnet trilayer structure with close to zero net magnetization

  • Valvidares, Manuel
  • Gargiani, Pierluigi
  • Melo, L.
  • Vasili, Hari Babu
  • Bleu, Y.
  • Perna, Paolo
  • Miranda, Rodolfo
  • Camarero, Julio
  • Cuadrado, Ramón
  • Pruneda, Miguel
  • Sánchez Barrera, Florencio
Resumen del póster presentado al 10th International Symposium on Metallic Multilayers (MML), celebrado en Madrid (España) del 17 al 21 de junio de 2019., We have explored the realization of trilayer structures with single layer Graphene spacers and antiferromagnetically exchange coupled ferromagnetic layers, i.e. FM/Gr/FM, with close to zero net magnetization configurations. Studied systems were in-situ prepared via molecular-beam epitaxy in combination with intercalation procedures, to exchange couple ferromagnetic layers (Co, Fe, Ni) through a Graphene single layer spacer obtained by CVD on a Ir(111) surface. Alternatively, we have explored the possibility of fabricating a related system by incomplete intercalation, which yields interesting results for the case of Gr CVD on sputtered Pt on a sapphire single crystal. Our results provide an experimental demonstration of perpendicular antiferromagnetic exchange coupling of two Cobalt layers across a Graphene single spacing layer, as recently predicted and extending previous results. Furthermore, this constitutes a first step towards the engineering of compensated Graphene-based synthetic antiferromagnetic structures and nanostructures, which display close to zeronet macroscopic magnetization configurations that appear interesting for fundamental studies and may enclose potential for applications. Details on the surface preparation and investigation on these hybrid magnetic/Graphene heterostructures using soft x-ray absorption spectroscopy and magnetic dichroism measurements performed at ALBA synchrotron will be presented., This work was supported by Mineco “Retos program” under grants FIS2013-45469-C4- 3-R, FIS2016-78591- C3 (AEI/FEDER, UE), MAT2014-59315-R, and additionally GenCat 2014SGR301, H2020 EINFRA-2015-1 676598 and Marie Skłodoswa-Curie no. 665919., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene-based synthetic ferrimagnets, antiferromagnets and exchange-biased ultrathin-film structures

  • Valvidares, Manuel
  • Gargiani, Pierluigi
  • Melo, L.
  • Vasili, Hari Babu
  • Bleu, Y.
  • Perna, Paolo
  • Miranda, Rodolfo
  • Camarero, Julio
  • Cuadrado, Ramón
  • Pruneda, Miguel
  • Sánchez Barrera, Florencio
Resumen del trabajo presentado al 10th International Symposium on Metallic Multilayers (MML), celebrado en Madrid (España) del 17 al 21 de junio de 2019., This work was supported by Mineco “Retos program” under grants FIS2013-45469-C4- 3-R, FIS2016-78591- C3 (AEI/FEDER, UE), MAT2014-59315-R, and additionally GenCat 2014SGR301, H2020 EINFRA-2015-1 676598 and Marie Skłodoswa-Curie no. 665919., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chiral asymmetry detected in a 2D array of permalloy square nanomagnets using circularly polarized x-ray resonant magnetic scattering

  • Díaz, Javier
  • Gargiani, Pierluigi
  • Quirós, Carlos
  • Redondo, Carolina
  • Morales, Rafael
  • Álvarez-Prado, L. M.
  • Martín, José Ignacio
  • Scholl, A.
  • Ferrer, Salvador
  • Vélez, María
  • Valvidares, S. M.
The sensitivity of circularly polarized x-ray resonant magnetic scattering (CXRMS) to chiral asymmetry has been demonstrated. The study was performed on a 2D array of Permalloy (Py) square nanomagnets of 700 nm lateral size arranged in a chess pattern, in a square lattice of 1000 nm lattice parameter. Previous x-ray magnetic circular dichroism photoemission electron microscopy (XMCD-PEEM) images on this sample showed the formation of vortices at remanence and a preference in their chiral state. The magnetic hysteresis loops of the array along the diagonal axis of the squares indicate a non-negligible and anisotropic interaction between vortices. The intensity of the magnetic scattering using circularly polarized light along one of the diagonal axes of the square magnets becomes asymmetric in intensity in the direction transversal to the incident plane at fields where the vortex states are formed. The asymmetry sign is inverted when the direction of the applied magnetic field is inverted. The result is the expected in the presence of an unbalanced chiral distribution. The effect is observed by CXRMS due to the interference between the charge scattering and the magnetic scattering., This work has been supported by Spanish MINECO under Grants FIS2013-45469 and FIS2016-76058 (AEI/FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Determination of the out-of-plane anisotropy contributions (first and second anisotropy terms) in amorphous Nd-Co thin films by micromagnetic numerical simulations

  • Álvarez-Prado, L. M.
  • Cid, Rosalía
  • Morales, Rafael
  • Díaz, Javier
  • Vélez, María
  • Rubio, Honorino
  • Hierro-Rodríguez, Aurelio
  • Alameda, J. M.
Amorphous Nd-Co thin films exhibit stripe shaped periodic magnetic domains with local out-of-plane magnetization components due to their perpendicular magnetic anisotropy. This anisotropy has been quantified in a fairly simple way by reproducing the experimental magnetization curves by means of micromagnetic numerical simulations. The simulations show that the first (K1) and second (K2) anisotropy constants must be used to properly describe the variation of the stripe domains with the in plane applied magnetic field. A strong temperature dependence of both K1 and K2 has been obtained between 10 K and room temperature. This anisotropy behavior is characteristic of two magnetically coupled 3d-4f sublattices with competing anisotropies., The authors acknowledge the financial support from Spanish MINECO under projects FIS2013-45469 and FIS2016-76058 (AEI/FEDER,UE). A. Hierro-Rodriguez acknowledge support from FCT of Portugal (Grant SFRH/BPD/90471/2012) and POPH/FSE programs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic order and disorder in nanomagnets probed by superconducting vortices

  • Rollano, Víctor
  • Valle, Javier del
  • Gómez, Alicia
  • Vélez, María
  • Álvarez-Prado, L. M.
  • Quirós, Carlos
  • Martín, José Ignacio
  • Osorio, M. R.
  • Granados, D.
  • González, Elvira M.
  • Vicent, J. L.
We have studied two nanomagnet systems with strong (Co/Pd multilayers) and weak (NdCo alloy films) stray magnetic fields by probing the out-of-plane magnetic states with superconducting vortices. The hybrid samples are made of array of nanomagnets embedded in superconducting Nb thin films. The vortex motion detects relevant magnetic state features, since superconducting vortices are able to discriminate between different magnetic stray field strengths and directions. The usual matching effect between the superconducting vortex lattice and the periodic pinning array can be quenched by means of disorder magnetic potentials with strong stray fields at random. Ordered stray fields retrieve the matching effect and yield asymmetry and shift in the vortex dissipation signal. Furthermore vortices can discriminate the sizes of the nanomagnet magnetic domains, detecting magnetic domain sizes as small as 70 nm. In addition, we observe that the vortex cores play the crucial role instead of the supercurrents around the vortex., We thank Spanish MINECO grants FIS2013-45469, FIS2016-76058 (AEI/FEDER, UE), Spanish CM grant S2013/MIT-2850. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). DG acknowledges RYC-2012-09864, S2013/MIT-3007 and ESP2015-65597-C4-3-R for financial support., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

2D magnetic domain wall ratchet: The limit of submicrometric holes

  • Herrero-Albillos, J.
  • Castán-Guerrero, C.
  • Valdés-Bango, F.
  • Bartolomé, J.
  • Bartolomé, F.
  • Kronast, F.
  • Hierro-Rodriguez, A.
  • Álvarez Prado, L.M.
  • Martín, J.I.
  • Vélez, M.
  • Alameda, J.M.
  • Sesé, J.
  • García, L.M.
The study of ratchet and crossed-ratchet effects in magnetic domain wall motion through 2D arrays of asymmetric holes is extended in this article to the submicrometric limit in hole size (small size regime). Therefore, the gap has been closed between the 2D ratchets in the range of tens-of-micrometers (large size regime) and the small size regime 1D ratchets based on nanowires. The combination of Kerr microscopy, X-ray PhotoEmission Electron Microscopy and micromagnetic simulations has allowed a full magnetic characterisation of both the domain wall (DW) propagation process over the whole array and the local DW morphology and pinning at the holes. It is found that the 2D small size limit is driven by the interplay between DW elasticity and half vortex propagation along hole edges: as hole size becomes comparable to DW width, flat DW propagation modes are favoured over kinked DW propagation due to an enhancement of DW stiffness, and pinned DW segments adopt asymmetric configurations related with Néel DW chirality. Nevertheless, both ratchet and crossed-ratchet effects have been experimentally found, and we propose a new ratchet/inverted-ratchet effect in the submicrometric range driven by magnetic fields and electrical currents respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Graphene-based synthetic antiferromagnets and ferrimagnets

  • Gargiani, Pierluigi|||0000-0002-6649-0538
  • Quadrado del Burgo, Ramón|||0000-0002-8344-2319
  • Vasili, Hari Babu|||0000-0002-3356-6436
  • Pruneda, Miguel|||0000-0002-3621-6095
  • Valvidares, Manuel|||0000-0003-4895-8114
Graphene-spaced magnetic systems with antiferromagnetic exchange-coupling offer exciting opportunities for emerging technologies. Unfortunately, the in-plane graphene-mediated exchange-coupling found so far is not appropriate for realistic exploitation, due to being weak, being of complex nature, or requiring low temperatures. Here we establish that ultra-thin Fe/graphene/Co films grown on Ir(111) exhibit robust perpendicular antiferromagnetic exchange-coupling, and gather a collection of magnetic properties well-suited for applications. Remarkably, the observed exchange coupling is thermally stable above room temperature, strong but field controllable, and occurs in perpendicular orientation with opposite remanent layer magnetizations. Atomistic first-principles simulations provide further ground for the feasibility of graphene-spaced antiferromagnetic coupled structures, confirming graphene's direct role in sustaining antiferromagnetic superexchange-coupling between the magnetic films. These results provide a path for the realization of graphene-based perpendicular synthetic antiferromagnetic systems, which seem exciting for fundamental nanoscience or potential use in spintronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanoscale imaging of buried topological defects with quantitative X-ray magnetic microscopy

  • Blanco-Roldán, Cristina
  • Quirós, Carlos|||0000-0002-0591-5563
  • Sorrentino, A.
  • Hierro-Rodríguez, A.
  • Álvarez-Prado, Luis Manuel|||0000-0002-3890-4983
  • Valcárcel, R.
  • Duch, M.
  • Torras, Núria
  • Esteve, Jaume|||0000-0001-9440-7984
  • Martín Carbajo, José Ignacio|||0000-0003-2256-0909
  • Vélez Fraga, María|||0000-0003-0311-7434
  • Alameda-Maestro, José María|||0000-0002-0735-0199
  • Pereiro, Eva|||0000-0001-7626-5935
  • Ferrer, Salvador
Advances in nanoscale magnetism increasingly require characterization tools providing detailed descriptions of magnetic configurations. Magnetic transmission X-ray microscopy produces element specific magnetic domain images with nanometric lateral resolution in films up to ∼100 nm thick. Here we present an imaging method using the angular dependence of magnetic contrast in a series of high resolution transmission X-ray microscopy images to obtain quantitative descriptions of the magnetization (canting angles relative to surface normal and sense). This method is applied to 55-120 nm thick ferromagnetic NdCo5 layers (canting angles between 65° and 22°), and to a NdCo5 film covered with permalloy. Interestingly, permalloy induces a 43° rotation of Co magnetization towards surface normal. Our method allows identifying complex topological defects (merons or ½ skyrmions) in a NdCo5 film that are only partially replicated by the permalloy overlayer. These results open possibilities for the characterization of deeply buried magnetic topological defects, nanostructures and devices.