Skip to main content

SENSORES LASER MEJORADOS EN MEDIOS DISPERSORES MEDIANTE POLARIZACION

FIS2017-89850-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Activities in imaging through fog at CD6: polarimetric imaging

  • Peña Gutiérrez, Sara|||0000-0001-9378-5545
  • Ballesta Garcia, Maria|||0000-0002-7198-169X
  • Royo Royo, Santiago|||0000-0003-0136-8301
The CD6 has recently developed a powerful line of research on polarimetric imaging. This field covers several applications in which the addition of polarization properties enables to enhance the contrast in detection. Moreover, recent literature states the possibility of using polarization illumination and detection to improve the range detection in turbid media such as fog, dust or smoke. This paper addresses the optical engineering behind the detection of polarization imaging and sets the basis of using polarization as a tool in detecting through fog., This work was supported by the Secretary of Universities and Research from the Generalitat of Catalunya and the European Social Fund under the grant 2018FI-B-00868 and partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project FIS2017- 89850R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

An overview of lidar imaging systems for autonomous vehicles

  • Royo Royo, Santiago|||0000-0003-0136-8301
  • Ballesta Garcia, Maria|||0000-0002-7198-169X
Lidar imaging systems are one of the hottest topics in the optronics industry. The need to sense the surroundings of every autonomous vehicle has pushed forward a race dedicated to deciding the final solution to be implemented. However, the diversity of state-of-the-art approaches to the solution brings a large uncertainty on the decision of the dominant final solution. Furthermore, the performance data of each approach often arise from different manufacturers and developers, which usually have some interest in the dispute. Within this paper, we intend to overcome the situation by providing an introductory, neutral overview of the technology linked to lidar imaging systems for autonomous vehicles, and its current state of development. We start with the main single-point measurement principles utilized, which then are combined with different imaging strategies, also described in the paper. An overview of the features of the light sources and photodetectors specific to lidar imaging systems most frequently used in practice is also presented. Finally, a brief section on pending issues for lidar development in autonomous vehicles has been included, in order to present some of the problems which still need to be solved before implementation may be considered as final. The reader is provided with a detailed bibliography containing both relevant books and state-of-the-art papers for further progress in the subject., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Bringing old telescopes to a new robotic life

  • Suc, Vincent
  • Ropert, Samuel
  • Jordan, Andres
  • Royo Royo, Santiago|||0000-0003-0136-8301
We present the development from its origin to the implementation of new hardware and software for telescope control. This system has been designed to be adaptable to old decommissioned telescopes. We will show how we applied a low-cost system to refurbish three telescopes belonging to the Pontificia Universidad Católica de Chile to allow their remote and automatic use with a web-based interface., V.S. acknowledges support from BASAL CATA PFB-06. A.J. acknowledges support from FONDECYT project 1171208, BASAL CATA PFB-06, and by the Ministry for the Economy, Development, and Tourism’s Programa Iniciativa Científica Milenio through grant IC 120009, awarded to the Millennium Institute of Astrophysics (MAS). S.R acknowledges MINECO project FIS-2017-89850-R for partially supporting this project., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Overview of biofluids and flow sensing techniques applied in clinical practice

  • Yáñez Alvarado, Carlos René|||0000-0002-4216-3794
  • Mas Giménez, Gerard de|||0000-0002-1160-3080
  • Royo Royo, Santiago|||0000-0003-0136-8301
This review summarizes the current knowledge on biofluids and the main flow sensing techniques applied in healthcare today. Since the very beginning of the history of medicine, one of the most important assets for evaluating various human diseases has been the analysis of the conditions of the biofluids within the human body. Hence, extensive research on sensors intended to evaluate the flow of many of these fluids in different tissues and organs has been published and, indeed, continues to be published very frequently. The purpose of this review is to provide researchers interested in venturing into biofluid flow sensing with a concise description of the physiological characteristics of the most important body fluids that are likely to be altered by diverse medical conditions. Similarly, a reported compilation of well-established sensors and techniques currently applied in healthcare regarding flow sensing is aimed at serving as a starting point for understanding the theoretical principles involved in the existing methodologies, allowing researchers to determine the most suitable approach to adopt according to their own objectives in this broad field., This research was supported by the Consejo Nacional de Ciencia y Tecnología (CONACYT) of México through Ph.D. grant 472102 and by the Ministerio de Economía y Competitividad through grant FIS2017-89850R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Improvement of the signal-to-noise ratio in a low power self-mixing interferometer using a coupled interferometric effect

  • Yáñez Alvarado, Carlos René|||0000-0002-4216-3794
  • Royo Royo, Santiago|||0000-0003-0136-8301
We present experimental results of a low-emission self-mixing interferometer that uses a coupled interferometric effect to improve the signal produced by a vibrating target. This method is intended to be useful in applications where the target is prone to be damaged by high-intensity laser sources. The beam of a Fabry-Perot laser diode is split and ~21% of the original emission is used to measure the harmonic micro-displacements of the target using the self-mixing effect. A portion of the residual beam, which also carries the interferometric information related to the target displacement, is reinjected back into the laser cavity by means of a fixed reflector, causing a second interferometric phenomenon that improves the signal-to-noise ratio of the measurement by up to ~13 dB. A theoretical description of the phenomena is also proposed. Further, we apply this technique to the two most common self-mixing sensing schemes: internal photodiode and junction voltage. The reported results show good agreement with theory and prove the capability of the method to enhance the SNR in SMI schemes., Consejo Nacional de Ciencia y Tecnología (472102); Ministerio de Economía y Competitividad (FIS2017-89850R)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Medida de superficies 3D mediante imagen polarimétrica

  • Peña Gutiérrez, Sara|||0000-0001-9378-5545
  • Maynou Ribas, Paula
  • Ballesta Garcia, Maria|||0000-0002-7198-169X
  • Royo Royo, Santiago|||0000-0003-0136-8301
La polarización de la luz reflejada en un objeto aporta información sobre su índice de refracción, su rugosidad, y también de su forma. Así, esta propiedad de la luz puede ser útil en visión artificial para recuperar la forma 3D de un objeto empleando iluminación pasiva y una cámara polarimétrica. En esta comunicación, proponemos una técnica basada en la reconstrucción de superficie utilizando una única perspectiva aprovechando la capacidad de medir los parámetros lineales de Stokes recurriendo a una cámara polarimétrica de división de focal. Los resultados presentados son asimismo comparados con el estado de arte actual demostrando la mejora en el cálculo de los ángulos de las normales de la superficie implementando los parámetros lineales de Stokes., Este trabajo ha sido realizado con el soporte de la Secretaria d’Universitats i Recerca de la Generalitat de Catalunya y del Fondo Social Europeo, en el margen de la beca FI con núm. de expediente 2020FI_B2 00068. Los autores agradecemos también el soporte del Ministerio de Ciencia e Innovación a través del proyecto FIS2017-89850-R, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Activities in imaging through fog at CD6: polarized light propagation modelling

  • Ballesta Garcia, Maria|||0000-0002-7198-169X
  • Peña Gutiérrez, Sara|||0000-0001-9378-5545
  • Royo Royo, Santiago|||0000-0003-0136-8301
Currently, in CD6, a new line of research devoted to polarimetric imaging is being developed. The use of polarization adds new information that is not reachable using other conventional imaging modes. In addition, recent literature explores the capability of using polarized illumination and detection to extend the range and enhance image contrast in turbid media such as fog, dust or smoke. Different computational and experimental tools are presented, in order to study polarized light behavior when propagating through foggy media., This work was supported by the Secretary of Universities and Research from the Generalitat of Catalunya and the European Social Fund under the grant 2019FI-B-00543 and partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project FIS2017-89850R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optical technologies for the improvement of skin cancer diagnosis: a review

  • Rey Barroso, Laura|||0000-0002-6305-0609
  • Peña Gutiérrez, Sara|||0000-0001-9378-5545
  • Yáñez Alvarado, Carlos René|||0000-0002-4216-3794
  • Burgos Fernández, Francisco Javier|||0000-0002-3749-6850
  • Vilaseca Ricart, Meritxell|||0000-0001-8166-1617
  • Royo Royo, Santiago|||0000-0003-0136-8301
The worldwide incidence of skin cancer has risen rapidly in the last decades, becoming one in three cancers nowadays. Currently, a person has a 4% chance of developing melanoma, the most aggressive form of skin cancer, which causes the greatest number of deaths. In the context of increasing incidence and mortality, skin cancer bears a heavy health and economic burden. Nevertheless, the 5-year survival rate for people with skin cancer significantly improves if the disease is detected and treated early. Accordingly, large research efforts have been devoted to achieve early detection and better understanding of the disease, with the aim of reversing the progressive trend of rising incidence and mortality, especially regarding melanoma. This paper reviews a variety of the optical modalities that have been used in the last years in order to improve non-invasive diagnosis of skin cancer, including confocal microscopy, multispectral imaging, threedimensional topography, optical coherence tomography, polarimetry, self-mixing interferometry, and machine learning algorithms. The basics of each of these technologies together with the most relevant achievements obtained are described, as well as some of the obstacles still to be resolved and milestones to be met., This research was supported by the Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) under the grants DPI2017-89414-R and FIS2017-89850-R. L.R-B. thanks the Spanish Government for the predoctoral FPI grant she received, grant number DPI2017-89414-R. S. P-G. thanks AGAUR for the FI grant she received, grant number 2020FI_B2 00068. C.Y. thanks CONACYT Mexico for the grant he received, grant number 472102, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Improvement of the signal-to-noise ratio in a low power self-mixing interferometer using a coupled interferometric effect

  • Yáñez Alvarado, Carlos René
  • Royo Royo, Santiago
We present experimental results of a low-emission self-mixing interferometer that uses a coupled interferometric effect to improve the signal produced by a vibrating target. This method is intended to be useful in applications where the target is prone to be damaged by high-intensity laser sources. The beam of a Fabry-Perot laser diode is split and ~21% of the original emission is used to measure the harmonic micro-displacements of the target using the self-mixing effect. A portion of the residual beam, which also carries the interferometric information related to the target displacement, is reinjected back into the laser cavity by means of a fixed reflector, causing a second interferometric phenomenon that improves the signal-to-noise ratio of the measurement by up to ~13 dB. A theoretical description of the phenomena is also proposed. Further, we apply this technique to the two most common self-mixing sensing schemes: internal photodiode and junction voltage. The reported results show good agreement with theory and prove the capability of the method to enhance the SNR in SMI schemes., Consejo Nacional de Ciencia y Tecnología (472102); Ministerio de Economía y Competitividad (FIS2017-89850R)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Medida de superficies 3D mediante imagen polarimétrica

  • Peña Gutiérrez, Sara
  • Maynou Ribas, Paula
  • Ballesta Garcia, Maria
  • Royo Royo, Santiago
La polarización de la luz reflejada en un objeto aporta información sobre su índice de refracción, su rugosidad, y también de su forma. Así, esta propiedad de la luz puede ser útil en visión artificial para recuperar la forma 3D de un objeto empleando iluminación pasiva y una cámara polarimétrica. En esta comunicación, proponemos una técnica basada en la reconstrucción de superficie utilizando una única perspectiva aprovechando la capacidad de medir los parámetros lineales de Stokes recurriendo a una cámara polarimétrica de división de focal. Los resultados presentados son asimismo comparados con el estado de arte actual demostrando la mejora en el cálculo de los ángulos de las normales de la superficie implementando los parámetros lineales de Stokes., Este trabajo ha sido realizado con el soporte de la Secretaria d’Universitats i Recerca de la Generalitat de Catalunya y del Fondo Social Europeo, en el margen de la beca FI con núm. de expediente 2020FI_B2 00068. Los autores agradecemos también el soporte del Ministerio de Ciencia e Innovación a través del proyecto FIS2017-89850-R, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optical technologies for the improvement of skin cancer diagnosis: a review

  • Rey Barroso, Laura
  • Peña Gutiérrez, Sara
  • Yáñez Alvarado, Carlos René
  • Burgos Fernández, Francisco Javier
  • Vilaseca Ricart, Meritxell
  • Royo Royo, Santiago
The worldwide incidence of skin cancer has risen rapidly in the last decades, becoming one in three cancers nowadays. Currently, a person has a 4% chance of developing melanoma, the most aggressive form of skin cancer, which causes the greatest number of deaths. In the context of increasing incidence and mortality, skin cancer bears a heavy health and economic burden. Nevertheless, the 5-year survival rate for people with skin cancer significantly improves if the disease is detected and treated early. Accordingly, large research efforts have been devoted to achieve early detection and better understanding of the disease, with the aim of reversing the progressive trend of rising incidence and mortality, especially regarding melanoma. This paper reviews a variety of the optical modalities that have been used in the last years in order to improve non-invasive diagnosis of skin cancer, including confocal microscopy, multispectral imaging, threedimensional topography, optical coherence tomography, polarimetry, self-mixing interferometry, and machine learning algorithms. The basics of each of these technologies together with the most relevant achievements obtained are described, as well as some of the obstacles still to be resolved and milestones to be met., This research was supported by the Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) under the grants DPI2017-89414-R and FIS2017-89850-R. L.R-B. thanks the Spanish Government for the predoctoral FPI grant she received, grant number DPI2017-89414-R. S. P-G. thanks AGAUR for the FI grant she received, grant number 2020FI_B2 00068. C.Y. thanks CONACYT Mexico for the grant he received, grant number 472102, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Bringing old telescopes to a new robotic life

  • Suc, Vincent
  • Ropert, Samuel
  • Jordan, Andres
  • Royo Royo, Santiago
We present the development from its origin to the implementation of new hardware and software for telescope control. This system has been designed to be adaptable to old decommissioned telescopes. We will show how we applied a low-cost system to refurbish three telescopes belonging to the Pontificia Universidad Católica de Chile to allow their remote and automatic use with a web-based interface., V.S. acknowledges support from BASAL CATA PFB-06. A.J. acknowledges support from FONDECYT project 1171208, BASAL CATA PFB-06, and by the Ministry for the Economy, Development, and Tourism’s Programa Iniciativa Científica Milenio through grant IC 120009, awarded to the Millennium Institute of Astrophysics (MAS). S.R acknowledges MINECO project FIS-2017-89850-R for partially supporting this project., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

An overview of lidar imaging systems for autonomous vehicles

  • Royo Royo, Santiago
  • Ballesta Garcia, Maria
Lidar imaging systems are one of the hottest topics in the optronics industry. The need to sense the surroundings of every autonomous vehicle has pushed forward a race dedicated to deciding the final solution to be implemented. However, the diversity of state-of-the-art approaches to the solution brings a large uncertainty on the decision of the dominant final solution. Furthermore, the performance data of each approach often arise from different manufacturers and developers, which usually have some interest in the dispute. Within this paper, we intend to overcome the situation by providing an introductory, neutral overview of the technology linked to lidar imaging systems for autonomous vehicles, and its current state of development. We start with the main single-point measurement principles utilized, which then are combined with different imaging strategies, also described in the paper. An overview of the features of the light sources and photodetectors specific to lidar imaging systems most frequently used in practice is also presented. Finally, a brief section on pending issues for lidar development in autonomous vehicles has been included, in order to present some of the problems which still need to be solved before implementation may be considered as final. The reader is provided with a detailed bibliography containing both relevant books and state-of-the-art papers for further progress in the subject., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Overview of biofluids and flow sensing techniques applied in clinical practice

  • Yáñez Alvarado, Carlos René
  • Mas Giménez, Gerard de
  • Royo Royo, Santiago
This review summarizes the current knowledge on biofluids and the main flow sensing techniques applied in healthcare today. Since the very beginning of the history of medicine, one of the most important assets for evaluating various human diseases has been the analysis of the conditions of the biofluids within the human body. Hence, extensive research on sensors intended to evaluate the flow of many of these fluids in different tissues and organs has been published and, indeed, continues to be published very frequently. The purpose of this review is to provide researchers interested in venturing into biofluid flow sensing with a concise description of the physiological characteristics of the most important body fluids that are likely to be altered by diverse medical conditions. Similarly, a reported compilation of well-established sensors and techniques currently applied in healthcare regarding flow sensing is aimed at serving as a starting point for understanding the theoretical principles involved in the existing methodologies, allowing researchers to determine the most suitable approach to adopt according to their own objectives in this broad field., This research was supported by the Consejo Nacional de Ciencia y Tecnología (CONACYT) of México through Ph.D. grant 472102 and by the Ministerio de Economía y Competitividad through grant FIS2017-89850R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Activities in imaging through fog at CD6: polarimetric imaging

  • Peña Gutiérrez, Sara
  • Ballesta Garcia, Maria
  • Royo Royo, Santiago
The CD6 has recently developed a powerful line of research on polarimetric imaging. This field covers several applications in which the addition of polarization properties enables to enhance the contrast in detection. Moreover, recent literature states the possibility of using polarization illumination and detection to improve the range detection in turbid media such as fog, dust or smoke. This paper addresses the optical engineering behind the detection of polarization imaging and sets the basis of using polarization as a tool in detecting through fog., This work was supported by the Secretary of Universities and Research from the Generalitat of Catalunya and the European Social Fund under the grant 2018FI-B-00868 and partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project FIS2017- 89850R., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Activities in imaging through fog at CD6: polarized light propagation modelling

  • Ballesta Garcia, Maria
  • Peña Gutiérrez, Sara
  • Royo Royo, Santiago
Currently, in CD6, a new line of research devoted to polarimetric imaging is being developed. The use of polarization adds new information that is not reachable using other conventional imaging modes. In addition, recent literature explores the capability of using polarized illumination and detection to extend the range and enhance image contrast in turbid media such as fog, dust or smoke. Different computational and experimental tools are presented, in order to study polarized light behavior when propagating through foggy media., This work was supported by the Secretary of Universities and Research from the Generalitat of Catalunya and the European Social Fund under the grant 2019FI-B-00543 and partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under the project FIS2017-89850R., Peer Reviewed, Postprint (published version)