Skip to main content

Desarrollo de nuevos nanomateriales porosos basados en biopolímeros para aplicaciones catalíticas

FJC2019-039515-I

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Juan de la Cierva Formación
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LA LAGUNA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Accessible Low-Cost Laser Pointers for the Reduction of Aryl Halides via Triplet-Triplet Annihilation Upconversion in Aerated Gels

  • Domínguez Domínguez, Paola
  • Bonardd, Sebastian
  • Martín Koury, Samuel
  • Díaz Díaz, David
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Jiménez, M Consuelo|||0000-0002-8057-4316
[EN] The search for economic alternatives in the use of expensive scientific equipment represents a way of providing many laboratories access to scientific developments that, otherwise, might be hampered by economic constraints. This inspired the purpose of this work, which was to demonstrate for the first time that we can carry out the photoreduction of aryl halides via green-to-blue upconversion in an aerated gel medium, using a simple economic set-up based on easily accessible and low-cost laser pointers. The optimized set-up consists of three laser pointers connected to a switching-mode power supply. One laser should be aligned to Z-axis and separated 5 cm from the sample, while the light incidence of the other two lasers should be adjusted to 45 degrees and separated ca. 3 cm from the sample. The results of this study were found to be reproducible in random experiments and demonstrated that the photoreduction of several aryl halides can be carry out within 24 h of irradiation with comparable yields and mass balances, to those obtained with other very expensive pulsed laser sources. An economic estimation of the expenses concludes that we can easily reduce by >98% the total cost of this type of research by using the described set-up. Our work offers many groups with limited resources a feasible alternative to work in this area without the necessity of extremely expensive devices., This research was funded by the Spanish Ministry of Science and Innovation, grant numbers PID2019-105391GB-C21/AEI/10.13039/501100011033 (D.D.D.) and PID2019-105391GB-C22/AEI/10.13039/501100011033 (M.C.J.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Recyclable, Immobilized Transition-Metal Photocatalysts

  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Abramov, Alex
  • Bonardd, Sebastian
  • Díaz Díaz, David
[EN] The use of transition-metal complexes as photocatalysts have allowed the performance of diverse organic transformations in an outstanding manner, characterized not only by high yields, TOF, and selectivity values, but also by modulating and providing access to novel molecular structures that, without them, would be difficult if not impossible. However, one of the biggest concerns regarding the use of these photocatalysts relies on the difficulties associated with their isolation from reaction media and reutilization once the chemical process ends. The above, besides contaminating reaction products and requiring out tedious purification processes, prompts the inevitable loss of the catalyst, directly affecting its recyclability. In addition, this situation results in negative outcomes from an economic and environmental perspective, since transition-metal complexes are usually expensive materials, and their unsuccessful recovery could result in leakage into the environment. These drawbacks served as inspiration for the elaboration of the present review focused on the development of novel strategies developed during the last decade for the successful recovery of these species. The strategies summarized herein, whether for homogeneous or heterogeneous systems, are based on the use of thermotropic solvents, changes in the hydrophilic balance of the catalyst, the employment of polymers, copolymers, porous macromolecular structures, and inorganic nanostructures as support of these entities. Moreover, the use of organized and confining media, such as micelles and gels in this context, is also discussed. We hope that this review will motivate the search for new strategies to develop novel catalytic systems, understanding that high performance is based not only on yields but also on recyclability, sustainability, and responsibility to the environment., Financial support from the Universitat Regensburg, the Elitenetzwerk Bayern (SYNCAT), the Spanish Ministry of Science and Innovation (PID2019-105391GB-C21, PID2019-105391GB-C22), is gratefully acknowledged. S.B. thanks MINECO for a Juan de la Cierva-Formacion contract (FJC2019-039515-I). R. P.-R. thanks Generalitat Valenciana for a Distinguished Researcher contract (CIDEGENT/2018/044). D.D.D. thanks the DFG for the Heisenberg Professorship Award and the Spanish Ministry of Science, Innovation and Universities for the Senior Beatriz Galindo Award (Distinguished Researcher, BEAGAL18/00166). D.D.D. also thanks NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Marrying plasmonic earth-abundant metals with catalytic metals for visible-light-promoted hydrogen generation on biobased materials

  • Ramírez, Óscar
  • Castillo, Sebastián
  • Bonardd, Sebastián
  • Saldías, César
  • O’Shea, James N.
  • Clive, Christopher Philip
  • Díaz Díaz, David
  • Leiva, Ángel
Bimetallic CuPt alloyed nanoparticles were conveniently synthesized on biohydrogels and were capable of carrying out hydrogen release from ammonium borane hydrolysis. The biohydrogel consisted of bead-shaped alginate chains crosslinked by calcium ions, which were used as support material to synthesize and stabilize the bimetallic nanoparticles, employing adsorption and coreduction strategy steps. The as-prepared nanoparticles exhibited light absorption in the visible range (580 nm) resulting from the surface plasmon resonance (SPR) phenomenon ascribed to the presence of copper in the alloyed system. On the other hand, the presence of platinum atoms in these nanoalloys endows them with a notable catalytic performance toward ammonia borane hydrolysis as a hydrogen release reaction, reaching kr values from 0.32 × 10−4 to 2.23 × 10−4 mol L−1 min−1 as the Pt content increases. Finally, by taking advantage of the SPR light absorption shown by CuPt 1:1, it was demonstrated that these entities could be successfully employed as photocatalysts for the hydrogen generation reaction, boosting its activity by almost 2.06 times compared to its performance in dark conditions. This catalytic enhancement was mainly ascribed to the light-harvesting properties promoted by plasmonic effects and the specimen's metallic composition., This research has been funding by the following grants and institutions: ANID 21191002 (PhD fellowship, Oscar Ramírez), MINECO FJC2019-039515-I (Juan de la Cierva – Formación contract, Sebastián Bonardd). Fondecyt Project 1211022 (César Saldías). Innovate UK through the Energy Research Accelerator, the Engineering and Physical Sciences Research Council (EPSRC), and the University of Nottingham Propulsion Futures Beacon (James N. O’Shea). FONDECYT 1211124 and FONDAP 15110019 projects (Angel Leiva). Spanish Government BEAGAL18/00166 (Beatriz Galindo Award, David Díaz Díaz), MCIN/AEI/10.13039/501100011033 PID2019-105391GB-C21 (David Díaz Díaz)., Peer reviewed