Skip to main content

DESARROLLO DE FORMULACIONES A BASE DE GEL PARA CATALISIS REDOX BASADA EN ANIQUILACION TRIPLETE-TRIPLETE USANDO LUZ VISIBLE

PID2019-105391GB-C21

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LA LAGUNA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Accessible Low-Cost Laser Pointers for the Reduction of Aryl Halides via Triplet-Triplet Annihilation Upconversion in Aerated Gels

  • Domínguez Domínguez, Paola
  • Bonardd, Sebastian
  • Martín Koury, Samuel
  • Díaz Díaz, David
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Jiménez, M Consuelo|||0000-0002-8057-4316
[EN] The search for economic alternatives in the use of expensive scientific equipment represents a way of providing many laboratories access to scientific developments that, otherwise, might be hampered by economic constraints. This inspired the purpose of this work, which was to demonstrate for the first time that we can carry out the photoreduction of aryl halides via green-to-blue upconversion in an aerated gel medium, using a simple economic set-up based on easily accessible and low-cost laser pointers. The optimized set-up consists of three laser pointers connected to a switching-mode power supply. One laser should be aligned to Z-axis and separated 5 cm from the sample, while the light incidence of the other two lasers should be adjusted to 45 degrees and separated ca. 3 cm from the sample. The results of this study were found to be reproducible in random experiments and demonstrated that the photoreduction of several aryl halides can be carry out within 24 h of irradiation with comparable yields and mass balances, to those obtained with other very expensive pulsed laser sources. An economic estimation of the expenses concludes that we can easily reduce by >98% the total cost of this type of research by using the described set-up. Our work offers many groups with limited resources a feasible alternative to work in this area without the necessity of extremely expensive devices., This research was funded by the Spanish Ministry of Science and Innovation, grant numbers PID2019-105391GB-C21/AEI/10.13039/501100011033 (D.D.D.) and PID2019-105391GB-C22/AEI/10.13039/501100011033 (M.C.J.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Strategies for aqueous triplet-triplet annihilation upconversion using nanostructured materials

  • Dominguez Dominguez, Paola
  • Bonardd, Sebastian
  • Mejias Perez, Nayara
  • Diaz Diaz, David
  • Álvarez-Gutiérrez, Daniel|||0000-0002-4619-4272
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Jiménez, M Consuelo|||0000-0002-8057-4316
[EN] Achieving photon upconversion in aqueous environments remains a major challenge from a materials design perspective, largely due to oxygen quenching, poor solubility of many chromophores, and the presence of competing deactivation pathways. Among the available approaches, triplet-triplet annihilation upconversion (TTA-UC) is particularly appealing because it operates under low excitation power densities. However, despite its maturity in organic solvents and solid-state systems, the implementation of TTA-UC in water has proven far more demanding. This review examines recent progress in aqueous TTA-UC from the standpoint of nanostructured material design. Rather than focusing solely on the photophysical mechanism, we discuss how different material architectures have been engineered to enable efficient upconversion in water by controlling molecular confinement, interfacial environments, and oxygen accessibility. The main classes of aqueous-compatible platforms such as nanocapsules, micelles, liposomes, microemulsions, hydrogels, nanoparticles, supramolecular assemblies, and metal-organic frameworks, are critically compared. Particular emphasis is placed on identifying the key structure-property relationships that determine triplet energy transfer, annihilation efficiency, and operational stability in aqueous media. By contrasting the performance and limitations of the different nanostructured systems, the review highlights general design strategies that are relevant across application areas including photomedicine, photocatalysis, optogenetics, and chemical sensing. Finally, remaining challenges and open questions are discussed, especially in relation to scalability, long-term robustness, and realistic operating conditions. Overall, this review aims to provide a coherent materials-oriented framework that can guide the rational development of photon upconversion systems capable of operating efficiently in water., Financial support from the Spanish government (projects PID2019-105391GB-C21, PID2019-105391GB-C22, PID2022-1381890NB-I00, PID2022-142118OB-I00 and PID2023-148367OB-I00 as well as pre-doctoral fellowships PRE2020-093783 and PRE2020-094108, all funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe") , Catedra de Medioambiente y Sostenibilidad, Cabildo de Tenerife-ULL (project MADS25.L1.05) , and Fundacion Ramon Areces is gratefully acknowledged. S.B. acknowledges the Canarian Agency for Research, Innovation and Information Society (ACIISI) for funding his "Viera y Clavijo" postdoctoral contract. D.D.D. thanks Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Aerobic Visible-Light-Driven Borylation of Heteroarenes in a Gel Nanoreactor

  • Herrera-Luna, Jorge Carlos|||0000-0003-2992-7339
  • Encinas Perea, Susana|||0000-0001-5275-8436
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Díaz Díaz, David
  • Abramov, Alex
[EN] Heteroarene boronate esters constitute valuable intermediates in modern organic synthesis. As building blocks, they can be further applied to the synthesis of new materials, since they can be easily transformed into any other functional group. Efforts toward novel and efficient strategies for their preparation are clearly desirable. Here, we have achieved the borylation of commercially available heteroarene halides under very mild conditions in an easy-to-use gel nanoreactor. Its use of visible light as the energy source at room temperature in photocatalyst-free and aerobic conditions makes this protocol very attractive. The gel network provides an adequate stabilizing microenvironment to support wide substrate scope, including furan, thiophene, selenophene, and pyrrole boronate esters., Financial support from the Generalitat Valenciana (CIDEGENT/2018/044) and the Spanish Ministry of Science and Innovation (PID2019-105391GB-C21, PID2019-105391GBC22, BEAGAL18/00166, and BES-2017-080215) is gratefully acknowledged. We thank the Electron Microscopy Service from the UPV and Prof. Julia Perez-Prieto for spectroscopy facilities. D.D.D. also thanks NANOtec, INTech, Cabildo de Tenerife, and ULL for laboratory facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Visible-Light Photoredox Catalyzed Formation of Triarylethylenes Using a Low-Cost Photosensitizer

  • Álvarez-Gutiérrez, Daniel|||0000-0002-4619-4272
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Domínguez Domínguez, Paola
  • Díaz Díaz, David
[EN] Visible-light photoredox catalysis using biacetyl (BA) as a low-cost photosensitizer enables the efficient formation of triarylethylenes (TAEs) via a Mizoroki-Heck-type coupling. The reaction proceeds efficiently in acetonitrile upon blue LED irradiation under anaerobic conditions. Alternatively, supramolecular viscoelastic gels have also been explored as reaction media, allowing the possibility of working under aerobic atmosphere. Mechanistic investigations by means of transient absorption spectroscopy and quenching experiments support a charge-separated intermediate pathway. Reaction quantum yield measurements further validate the efficiency of BA, demonstrating its potential as an alternative to transition-metal catalysts. Overall, this work presents a sustainable and scalable strategy for TAEs synthesis, integrating photoredox catalysis with soft material engineering. These findings pave the way for broader applications in green chemistry and functional materials., Financial support from the Spanish Government (projects PID2019-105391GB-C21, PID2019-105391GB-C22, PID2022-1381890NB-I00, PID2022-142118OB-I00 and PID2023-148367OB-I00 as well as predoctoral fellowships PRE2020-093783 and PRE2020-094108, all funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe"), Catedra de Medioambiente y Sostenibilidad, Cabildo de Tenerife-ULL (project MADS25.L1.05), is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Recyclable, Immobilized Transition-Metal Photocatalysts

  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Abramov, Alex
  • Bonardd, Sebastian
  • Díaz Díaz, David
[EN] The use of transition-metal complexes as photocatalysts have allowed the performance of diverse organic transformations in an outstanding manner, characterized not only by high yields, TOF, and selectivity values, but also by modulating and providing access to novel molecular structures that, without them, would be difficult if not impossible. However, one of the biggest concerns regarding the use of these photocatalysts relies on the difficulties associated with their isolation from reaction media and reutilization once the chemical process ends. The above, besides contaminating reaction products and requiring out tedious purification processes, prompts the inevitable loss of the catalyst, directly affecting its recyclability. In addition, this situation results in negative outcomes from an economic and environmental perspective, since transition-metal complexes are usually expensive materials, and their unsuccessful recovery could result in leakage into the environment. These drawbacks served as inspiration for the elaboration of the present review focused on the development of novel strategies developed during the last decade for the successful recovery of these species. The strategies summarized herein, whether for homogeneous or heterogeneous systems, are based on the use of thermotropic solvents, changes in the hydrophilic balance of the catalyst, the employment of polymers, copolymers, porous macromolecular structures, and inorganic nanostructures as support of these entities. Moreover, the use of organized and confining media, such as micelles and gels in this context, is also discussed. We hope that this review will motivate the search for new strategies to develop novel catalytic systems, understanding that high performance is based not only on yields but also on recyclability, sustainability, and responsibility to the environment., Financial support from the Universitat Regensburg, the Elitenetzwerk Bayern (SYNCAT), the Spanish Ministry of Science and Innovation (PID2019-105391GB-C21, PID2019-105391GB-C22), is gratefully acknowledged. S.B. thanks MINECO for a Juan de la Cierva-Formacion contract (FJC2019-039515-I). R. P.-R. thanks Generalitat Valenciana for a Distinguished Researcher contract (CIDEGENT/2018/044). D.D.D. thanks the DFG for the Heisenberg Professorship Award and the Spanish Ministry of Science, Innovation and Universities for the Senior Beatriz Galindo Award (Distinguished Researcher, BEAGAL18/00166). D.D.D. also thanks NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Marrying plasmonic earth-abundant metals with catalytic metals for visible-light-promoted hydrogen generation on biobased materials

  • Ramírez, Óscar
  • Castillo, Sebastián
  • Bonardd, Sebastián
  • Saldías, César
  • O’Shea, James N.
  • Clive, Christopher Philip
  • Díaz Díaz, David
  • Leiva, Ángel
Bimetallic CuPt alloyed nanoparticles were conveniently synthesized on biohydrogels and were capable of carrying out hydrogen release from ammonium borane hydrolysis. The biohydrogel consisted of bead-shaped alginate chains crosslinked by calcium ions, which were used as support material to synthesize and stabilize the bimetallic nanoparticles, employing adsorption and coreduction strategy steps. The as-prepared nanoparticles exhibited light absorption in the visible range (580 nm) resulting from the surface plasmon resonance (SPR) phenomenon ascribed to the presence of copper in the alloyed system. On the other hand, the presence of platinum atoms in these nanoalloys endows them with a notable catalytic performance toward ammonia borane hydrolysis as a hydrogen release reaction, reaching kr values from 0.32 × 10−4 to 2.23 × 10−4 mol L−1 min−1 as the Pt content increases. Finally, by taking advantage of the SPR light absorption shown by CuPt 1:1, it was demonstrated that these entities could be successfully employed as photocatalysts for the hydrogen generation reaction, boosting its activity by almost 2.06 times compared to its performance in dark conditions. This catalytic enhancement was mainly ascribed to the light-harvesting properties promoted by plasmonic effects and the specimen's metallic composition., This research has been funding by the following grants and institutions: ANID 21191002 (PhD fellowship, Oscar Ramírez), MINECO FJC2019-039515-I (Juan de la Cierva – Formación contract, Sebastián Bonardd). Fondecyt Project 1211022 (César Saldías). Innovate UK through the Energy Research Accelerator, the Engineering and Physical Sciences Research Council (EPSRC), and the University of Nottingham Propulsion Futures Beacon (James N. O’Shea). FONDECYT 1211124 and FONDAP 15110019 projects (Angel Leiva). Spanish Government BEAGAL18/00166 (Beatriz Galindo Award, David Díaz Díaz), MCIN/AEI/10.13039/501100011033 PID2019-105391GB-C21 (David Díaz Díaz)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hetero-functionalization of polyitaconates for developing improved polymer dielectrics: Merging sulfones with bulky/rigid cycles

  • Bonardd, Sebastián
  • Maiz, Jon
  • Alegría, Ángel
  • Pomposo, José A.
  • Verde-Sesto, Ester
  • Kortaberria, Galder
  • Díaz Díaz, David
This work addresses the preparation of new polymer dielectrics working under the dipolar glass polymer (DGP) concept. Herein, we report the synthesis and characterization of four hetero-functionalized polyitaconates bearing sulfones as high dipole moment entities and norbornane or adamantane structures responsible for increasing the glass transition temperature (Tg) and thus the range of temperatures where they can work without degrading or showing high energy dissipation. As a result, all obtained polymers exhibited dielectric constants (εr’) between 5.1 and 6.2 while presenting low loss factors (Tan(δ) < 0.01), reaching the status of high-dielectric polymers with a low dissipative behavior. In addition, it was demonstrated that including bulky structures into their polymer backbone allows for an increase of up to 80 °C in their working temperature ranges, expanding the temperature range where they behave as DGPs in an outstanding manner. A complete structural, thermal and dielectric characterization was carried out in terms of infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetry (TGA), differential scanning calorimetry (DSC) and broad dielectric spectroscopy (BDS). Overall, these materials seem to fulfill the basic requirements to be considered good candidates for dielectric applications such as energy storage, confirming the versatility of polyitaconate-based materials., The Polymers & Soft Matter team acknowledges the funding provided by Grant No. PID2021-123438NB-I00 from MCIN/AEI/10.13039/501100011033, as well as the support from “ERDF A way of making Europe,” Grant No. TED2021-130107 A-I00, also funded by MCIN/AEI/10.13039/501100011033, and Unión Europea “NextGenerationEU/PRTR.” Additionally, we acknowledge the financial support from Eusko Jaurlaritza under code: IT1566-22 and Gipuzkoako Foru Aldundia, Programa de Red Guipuzcoana de Ciencia,Tecnología e Innovación, code: 2023-CIEN-000069-01. G. K. thanks to Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-126417NB-I00 and by the Gobierno Vasco/Eusko Jaurlaritza, grant number IT1690-22. D. D. D. thanks the Spanish Ministry of Science, Innovation and Universities for the grants TED2021-132847B-I00 and PID2019-105391GB-C21 funded by MCIN/AEI/10.13039/501100011033 and NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly efficient and reusable CuAu nanoparticles supported on crosslinked chitosan hydrogels as a plasmonic catalyst for nitroarene reduction

  • Ramírez, Óscar
  • Bonardd, Sebastián
  • Saldías, César
  • Leiva, Ángel
  • Díaz Díaz, David
The synthesis of CuAu-based monometallic (MNPs) and bimetallic nanoparticles (BNPs) supported on chitosan-based hydrogels for their application as catalysts is presented. The hydrogels consisted of chitosan chains cross-linked with tripolyphosphate (TPP) in the form of beads with an approximate average diameter of 1.81 mm. The MNPs and BNPs were obtained by the adsorption of metallic ions and their subsequent reduction with hydrazine, achieving a metallic loading of 0.297 mmol per gram of dry sample, with average nanoparticle sizes that were found between 2.6 and 4.4 nm. Both processes, metal adsorption and the stabilization of the nanoparticles, are mainly attributed to the participation of chitosan hydroxyl, amine and amide functional groups. The materials revealed important absorption bands in the visible region of the light spectra, specifically between 520 and 590 nm, mainly attributed to LSPR given the nature of the MNPs and BNPs inside the hydrogels. Subsequently, the hydrogels were evaluated as catalysts against the reduction of 4-nitrophenol (4NP) into 4-aminophenol (4AP), followed by UV–visible spectroscopy. The kinetic advance of the reaction revealed important improvements in the catalytic activity of the materials by synergistic effect of BNPs and plasmonic enhancement under visible light irradiation, given the combination of metals and the light harvesting properties of the nanocomposites. Finally, the catalytic performance of hydrogels containing BNPs CuAu 3:1 showed an important selectivity, recyclability and reusability performance, due to the relevant interaction of the BNPs with the chitosan matrix, highlighting the potential of this nanocomposite as an effective catalyst, with a potential environmental application., O.R. thanks ANID doctoral scholarship number 21191002. S.B. thanks to “Polimeros y Materia blanda/Polymers and Soft Matter” supported by the Basque Government, code: IT156-22. C.S. thanks FONDECYT project 121022. A.L. thanks to FONDECYT project number 1211124 and FONDAP 1522A0006, for financial support for the research. D.D.D. thanks the Spanish Ministry of Science, Innovation and Universities for the Senior Beatriz Galindo Award (BEAGAL18/00166), the project PID 2019-105391 GB-C21 funded by MCIN/AEI/10.13039/501100011033 and NANOtec, INTech, Cabildo de Tenerife and ULL for laboratory facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reversible supramolecular hydrogel for air-tolerant photon upconversion: Key development for photocatalyst recovery and product extraction in aqueous medium

  • Domínguez Domínguez, Paola
  • Kuge, Keita
  • Shoyama, Hayato
  • Mizukami, Kiichi
  • Sasaki, Yoichi
  • Bonardd, Sebastián
  • Kimizuka, Nobuo
  • Díaz Díaz, David
The development of upconversion hydrogels that operate in water and under aerobic conditions remains a significant challenge, especially when postreaction separation and component recovery are needed. Here, we present the first supramolecular photocatalytic hydrogel based on a low-molecular-weight gelator (LMWG) that enables green-to-blue triplet–triplet annihilation upconversion (TTA-UC) in aerated water. The hydrogel forms through the coassembly of the LMWG, surfactant, and a sensitizer/emitter pair (PtOEP/DPAS), giving rise to nanostructured compartments that protect long-lived excited triplet states from oxygen quenching. Unlike previous systems based on biopolymers or covalent networks, this supramolecular gelation is fully reversible, allowing the photochemical reaction to be carried out in situ, followed by gel disassembly for the easy extraction of reaction products without the need for heat. Notably, up to 77% of the precious Pt-based sensitizer can be recovered from the gel matrix. This modular, recyclable platform offers an approach to performing photochemical transformations under mild and environmentally friendly conditions, with advantages over previous air-stable UC hydrogels in terms of reusability, extractability, and operational simplicity., D.D.D. acknowledges the Ministry of Science and Innovation projects PID2019-105391GB-C21/AEI/10.13039/501100011033, TED2021-132847BI00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE, Cátedra de Medioambiente y Sostenibilidad (Cabildo de Tenerife-ULL), and Fundación Ramón Areces for financial support. P.D.D. thanks the Ministry of Science and Innovation for a predoctoral fellowship PRE2020-094108. S.B. acknowledges the Canarian Agency for Research, Innovation and Information Society (ACIISI) for funding his “Viera y Clavijo” postdoctoral contract. D.D.D. also thanks Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities. N.K. acknowledges the financial support of JSPS KAKENHI grant number JP20H05676., Peer reviewed