Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Development and validation of a virtual engine model for simulating standard testing cycles

  • Auñón García, Ángel
[ES] Las nuevas regulaciones en materia de emisiones de efecto invernadero y calidad del aire han conducido la evolución tecnológica de los motores de combustión interna durante los últimos años. Las mejoras en el proceso de la combustión, la sobrealimentación, la gestión térmica, los sistemas de post tratamiento y técnicas como la recirculación de gases de escape, han permitido que los motores de combustión interna de hoy en día sean cada vez más limpios. La adopción en Europa del nuevo ciclo de homologación WLTP, que considera un ciclo de conducción más realista que su predecesor el NEDC, así como la necesidad de evaluar las emisiones contaminantes en diferentes escenarios de temperatura ambiente y de altitud, suponen un desafío para los fabricantes a la hora de diseñar y optimizar sus motores. En este contexto, el modelado unidimensional del motor ofrece la posibilidad de desarrollar y probar diferentes soluciones con la suficiente precisión,a la vez que permite agilizar el proceso de diseño del motor y reducir los costes de éste. El objetivo de esta tesis es el de desarrollar un modelo completo de motor virtual que permita simular condiciones transitorias de régimen de giro y grado de carga, así como diferentes condiciones ambientales de presión y temperatura. Con este modelo de motor se pretende predecir las principales variables termo-fluidodinámicas en diferentes puntos del motor y las emisiones contaminantes liberadas en el escape. Por otra parte, el arranque en frío y el funcionamiento a bajas temperaturas están asociados a un mayor consumo, mayores emisiones de hidrocarburos (HC) y monóxido de carbono (CO), así como mayores emisiones de óxidos de nitrógeno (NOx) debido a la desactivación de los sistemas de recirculación de gases de escape. Para paliar estos efectos adversos, una opción es lograr que el sistema de postratamiento alcance su temperatura de activación lo más pronto posible. En este trabajo se aborda este objetivo mediante dos soluciones. Por un lado, se ha explorado la posibilidad de elevar la temperatura de los gases en el escape mediante un sistema de distribución variable. Con este método se pueden reducir las emisiones de CO y HC en torno a un 40-50 % y las emisiones de NOx hasta un 15 % durante la primera fase del ciclo WLTC, a costa de una penalización en el consumo de combustible. Por otro lado, también se ha estudiado la posibilidad de aislar térmicamente el sistema de escape. En este caso, es posible reducir las emisiones de CO y HC en torno a un 30 % sin mejorar las de NOx., [CA] Les noves regulacions en matèria d'emissions d'efecte d'hivernacle i qualitat de l'aire han conduït la evolució tecnològica dels motors de combustió interna durant els darrers anys. Les millores en el procés de la combustió, la sobrealimentació, la gestió tèrmica, els sistemes de postractament i tècniques com la recirculació de gasos d'escapament, han permès que els motors de combustió interna d'avui dia siguen cada vegada més nets. L'adopció a Europa del nou cicle d'homologació WLTP, que considera un cicle de conducció més realista que el seu predecessor el NEDC, així com la necessitat d'avaluar les emissions de gasos contaminants en diferents escenaris de temperatura ambient i humitat, suposen un repte per als fabricants a l'hora de dissenyar i optimitzar els seus motors. En aquest context, el modelatge unidimensional del motor ofereix la possibilitat de desenvolupar i provar diferents solucions amb la suficient precisió, al mateix temps que agilitza el procés de disseny del motor i reduïx els costos derivats d'aquest. L'objectiu d'aquesta tesi és el de desenvolupar un model complete de motor virtual que permeta simular condicions transitòries de règim de gir i grau de càrrega, així com diferents condicions ambientals de pressió i temperatura. Amb aquest model de motor es pretén predir les principals variables termo-fluidodinàmiques en diferents punts del motor i les emissions contaminants alliberades en l'escapament. Per altra banda, l'arrancada en fred i el funcionament a baixes temperatures están associats a un major consum, majors emissions d'hidrocarburs (HC) i monòxid de carboni (CO), així com majors emissions d'òxids de nitrògen (NOx) degudes a la desactivació dels sistemes de recirculació de gasos d'escapament. Per a pal·liar aquestos efectes indesitjats, una opció és aconseguir que el sistema de postractament arribe a la seua temperatura d'activació el més prompte possible. En aquest treball, aquest objectiu s'aborda mitjançant dues solucions. Per una banda, s'ha investigat la possibilitat d'augmentar la temperatura dels gasos en l'escapament per mitjà d'un sistema de distribució variable. Amb aquest mètode s'ha aconseguit reduïr les emissions de CO i HC al voltant d'un 40-50 % i les emissions de NOx fins a un 15 % durant la primera fase del cicle WLTC, acosta d'una penalització en el consum de combustible. Per altra banda, també s'ha estudiat la possibilitat d'aïllar tèrmicament el sistema d'escapament. En aquest cas, és possible reduir les emissions de CO i HC vora un 30 % sense millorar les de NOx ., [EN] The new regulations regarding greenhouse emissions and air quality have led the technological progress of the internal combustion engines during the recent years. Improvements in the combustion process, turbocharging, thermal management, after-treatment systems and techniques such as the exhaust gases recirculation, have resulted in cleaner internal combustion engines. The adoption of the new type approval test in Europe, so-called WLTP, which represents a more realistic driving cycle than its forerunner the NEDC, as well as the need to evaluate pollutant emissions at different conditions of ambient temperature and altitude, represent a challenge for manufacturers when it comes to design and optimise their engines. In this context, one-dimensional engine models offer the possibility to develop and test different solutions with enough accuracy, while hastening the engine design process and reducing its costs. The main objective of this thesis is to develop a complete virtual engine model able to simulate transient conditions of engine speed and load, as well as different ambient conditions of pressure and temperature. The engine model is used to predict the main thermo-and fluid dynamic variables at different engine locations and the tailpipe pollutant emissions. Furthermore, engine cold start and its operation at low temperature is associated to a greater fuel consumption, hydrocarbon (HC) and carbon monoxide (CO) emissions; as well as more nitrogen oxide (NOx) emissions due to the deactivation of the exhaust gases recirculation systems. A solution to mitigate these negative effects is to heat up the after-treatment system so as to achieve its activation temperature as soon as possible. In the work presented, this goal is addressed through two different standpoints. On the one hand, variable valve timing systems have been studied as a way to increase the exhaust gases temperature. With this option it is possible to reduce CO and HC emissions by 40-50 % and NOx emissions by 15 % during the first stage of the WLTC cycle, at the expense of a penalty in the fuel consumption. On the other hand, the thermal insulation of the exhaust system has also been studied with the same objective. In this case, it is possible to reduce CO and HC emissions by 30 %, while not improving NOx ones., The author wishes to acknowledge the financial support received through the FPI S2 2018 1048 grant of Programa de Apoyo para la Investigación y Desarrollo (PAID) of Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of a Variable Valve Actuation Control to Improve Diesel Oxidation Catalyst Efficiency and Emissions in a Light Duty Diesel Engine

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • Martín, Jaime|||0000-0002-0496-3176
  • Auñón-García, Ángel
[EN] Growing interest has arisen to adopt Variable Valve Timing (VVT) technology for automotive engines due to the need to fulfill the pollutant emission regulations. Several VVT strategies, such as the exhaust re-opening and the late exhaust closing, can be used to achieve an increment in the after-treatment upstream temperature by increasing the residual gas amount. In this study, a one-dimensional gas dynamics engine model has been used to simulate several VVT strategies and develop a control system to actuate over the valves timing in order to increase diesel oxidation catalyst efficiency and reduce the exhaust pollutant emissions. A transient operating conditions comparison, taking the Worldwide Harmonized Light-Duty Vehicles Test Cycle (WLTC) as a reference, has been done by analyzing fuel economy, HC and CO pollutant emissions levels. The results conclude that the combination of an early exhaust and a late intake valve events leads to a 20% reduction in CO emissions with a fuel penalty of 6% over the low speed stage of the WLTC, during the warm-up of the oxidation catalyst. The same set-up is able to reduce HC emissions down to 16% and NO(x)emission by 13%., This research has been partially funded by the Spanish government under the grant agreement TRA2017-89894-R ("Mecoem"). Angel Aunon was supported through the "Apoyo para la investigacion y Desarrollo (PAID)" grant for doctoral studies (FPI S2 2018 1048) by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diesel engine optimization and exhaust thermal management by means of variable valve train strategies

  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • Martín, Jaime|||0000-0002-0496-3176
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • Auñón-García, Ángel
[EN] Due to the need to achieve a fast warm-up of the after-treatment system in order to fulfill the pollutant emission regulations, a growing interest has arisen to adopt variable valve timing technology for automotive engines. Several variable valve timing strategies can be used to achieve an increment in the after-treatment upstream temperature by increasing the residual gas amount. In this study, a one-dimensional gas dynamics engine model has been used to carry out a simulation study comparing several exhaust variable valve actuation strategies. A steady-state analysis has been done in order to evaluate the potential of the different strategies at different operating points. Finally, the effect on the after-treatment warm-up, fuel economy and pollutant emission levels was evaluated over the worldwide harmonized light vehicles test cycle. As a conclusion, the combination of an advanced exhaust (early exhaust valve opening and early exhaust valve closing) and a delayed intake (late intake valve opening and late intake valve closing) presented the best trade-off between exhaust temperature increment and fuel consumption, which achieved a mean temperature increment during low-speed phase of the worldwide harmonized light vehicles test cycle of 27¿°C with a fuel penalty of 6%. The exhaust valve re-opening technique offers a worse trade-off. However, the exhaust valve re-opening leads to lower nitrogen oxide (29% less) and carbon monoxide (11% less) pollutant emissions., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research has been partially funded by the European Union's Horizon 2020 Framework Programme for research, technological development and demonstration under grant agreement 723976 ("DiePeR") and by the Spanish government under the grant agreement TRA2017-89894-R. The authors want to acknowledge the "Apoyo para la investigacion y Desarrollo (PAID)," grant for doctoral studies (FPI S2 2018 1048), of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the exhaust thermal insulation on the engine efficiency and the exhaust temperature under transient conditions

  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • Martín, Jaime|||0000-0002-0496-3176
  • Piqueras, P.|||0000-0002-3767-0839
  • Auñón-García, Ángel
[EN] As well as new advances in the after-treatment systems are required to achieve the new pollutant emission requirements, new designs of the exhaust line can be considered in order to increase the engine efficiency and the after-treatment effectiveness. In the present work, a one-dimensional gas dynamic model has been used to carry out a simulation study comparing several exhaust insulation solutions. This solutions include the insulation of the exhaust ports, the exhaust manifold, the internal surface of the turbine volute, the turbine external housing, as well as different combinations of these solutions. A transient analysis has been done in order to evaluate the increment in the exhaust gases temperature, fuel economy and pollutant emission levels over the WLTC (Worldwide harmonized Light vehicles Test Cycle) at three different temperature conditions. As a conclusion, a 12% increment in the turbine outlet gas enthalpy can be achieved by insulating both the exhausts ports and the exhaust manifold. Moreover, more than 30% less pollutant emissions are released to the environment with this setup., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research has been partially funded by the European Union's Horizon 2020 Framework Programme for research, technological development and demonstration under grant agreement 723976 ("DiePeR'') and by the Spanish government under the grant agreement TRA2017-89894-R ("Mecoem''). Angel Aunon was supported through the "Apoyo para la investigacion y Desarrollo (PAID)'' grant for doctoral studies (FPI S2 2018 1048) by Universitat Politecnica de Valencia.