Skip to main content

CÁPSULAS HÍBRIDAS PARA NUEVAS FUNCIONALIZACIONES DE FIBRAS TEXTILES (CAPHITEX)

IPT-2011-0878-420000

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Cooperación Público-Privada
Subprogram Subprograma INNPACTO
Call INNPACTO
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Estrategias de Colaboracion Publico-Privada
Beneficiary centre NUREL SA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Caffeine encapsulation in metal organic framework MIL-53(Al) at pilot plant scale for preparation of polyamide textile fibers with cosmetic properties

  • Zornoza, Beatriz
  • Rubio, César
  • Piera, Elena
  • Caballero, Miguel A.
  • Julve, Daniel
  • Pérez, Jorge
  • Téllez, Carlos
  • Coronas, Joaquín
Currently in the marketplace, we can find clothing items able to release skin-friendly ingredients while wearing them. These innovative products with high-added value are based on microencapsulation technology. In this work, due to its lightness, flexibility, porosity, chemical affinity and adsorption capacity, metal–organic framework (MOF) MIL-53(Al) was the selected microcapsule to be synthesized at a large scale and subsequent caffeine encapsulation. The synthesis conditions (molar ratio of reactants, solvents used, reaction time, temperature, pressure reached in the reactor and activation treatment to enhance the encapsulation capacity) were optimized by screening various scaling-up reactor volumes (from lab-scale of 40 mL to pilot plant production of 3.75 L). Two types of Al salts (Al(NO3)3·9H2O from the original recipe and Al2(SO4)3 as commercial SUFAL 8.2) were employed. The liporeductor cosmetic caffeine was selected as the active molecule for encapsulation. Caffeine (38 wt %) was incorporated in CAF@MIL-53(Al) microcapsules, as analyzed by TGA and corroborated by GC/MS and UV–vis after additive extraction. CAF@MIL-53(Al) microcapsules showed a controlled release of caffeine during 6 days at 25 °C (up to 22% of the initial caffeine). These capsules were incorporated through an industrial spinning process (with temperatures up to 260 °C) to manufacture PA-6 fibers with cosmetic properties. Up to 0.7 wt % of capsules were successfully incorporated into the fibers hosting 1700 ppm of caffeine. Fabrics were submitted to scouring, staining, and washing processes, detecting the presence of caffeine in the cosmetic fiber., Financial support from the Spanish Ministry of Economy and Competitiveness (IPT-2011-0878-420000) is gratefully acknowledged. The authors would like to thank the University of Zaragoza for the use of the Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas”, at the Universidad de Zaragoza., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Separation of H2 and CO2 Containing Mixtures with Mixed Matrix Membranes Based on Layered Materials

  • Rubio, Cesar
  • Zornoza, Beatriz
  • Gorgojo, Patricia
  • Tellez, Carlos
  • Coronas, Joaquín
Some membrane separation processes are gradually taking over conventional processes such as distillation, evaporation or crystallization as the technology progresses from bench-scale tests to large-scale prototypes. However, membranes for H2 and CO2 separation constitute a daring technology still under development. This overview focuses on mixed matrix membranes (MMMs), a special type of membranes in which a filler is dispersed in a polymer matrix, as a successful strategy to improve their permeability-selectivity performance while keeping the polymer processability. In particular, among all the possible fillers for MMMs, layered materials (porous zeolites and titanosilicates and graphite derivatives) are discussed in detail due to the several advantages they offer regarding selective microporosity, crystallinity and, what is most important, high specific surface area and aspect ratio. In fact, a selective and as thin as possible, i.e. with high aspect ratio, filler would help to develop high performance MMMs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Caffeine Encapsulation in Metal Organic Framework MIL-53(Al) at Pilot Plant Scale for Preparation of Polyamide Textile Fibers with Cosmetic Properties

  • Zornoza, B.
  • Rubio, C.
  • Piera, E.
  • Caballero, M. A.
  • Julve, D.
  • Pérez, J.
  • Téllez, C.
  • Coronas, J.
Currently in the marketplace, we can find clothing items able to release skin-friendly ingredients while wearing them. These innovative products with high-added value are based on microencapsulation technology. In this work, due to its lightness, flexibility, porosity, chemical affinity and adsorption capacity, metal-organic framework (MOF) MIL-53(Al) was the selected microcapsule to be synthesized at a large scale and subsequent caffeine encapsulation. The synthesis conditions (molar ratio of reactants, solvents used, reaction time, temperature, pressure reached in the reactor and activation treatment to enhance the encapsulation capacity) were optimized by screening various scaling-up reactor volumes (from lab-scale of 40 mL to pilot plant production of 3.75 L). Two types of Al salts (Al(NO3)3·9H2O from the original recipe and Al2(SO4)3 as commercial SUFAL 8.2) were employed. The liporeductor cosmetic caffeine was selected as the active molecule for encapsulation. Caffeine (38 wt %) was incorporated in CAF@MIL-53(Al) microcapsules, as analyzed by TGA and corroborated by GC/MS and UV-vis after additive extraction. CAF@MIL-53(Al) microcapsules showed a controlled release of caffeine during 6 days at 25 °C (up to 22% of the initial caffeine). These capsules were incorporated through an industrial spinning process (with temperatures up to 260 °C) to manufacture PA-6 fibers with cosmetic properties. Up to 0.7 wt % of capsules were successfully incorporated into the fibers hosting 1700 ppm of caffeine. Fabrics were submitted to scouring, staining, and washing processes, detecting the presence of caffeine in the cosmetic fiber. © 2022 The Authors. Published by American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Pervaporation and membrane reactor performance of polyimide based mixed matrix membranes containing MOF HKUST-1

  • Sorribas, Sara
  • Kudasheva, Alina
  • Almendro, Eduardo
  • Zornoza, Beatriz
  • Iglesia, Oscar de la
  • Tellez, Carlos
  • Coronas, Joaquín
Mixed matrix membranes (MMM) containing MOF Cu3(BTC)2 (HKUST-1) at 20–40 wt% loading have been prepared using commercial polyimide (PI) Matrimid® 5218 as polymer matrix. With the addition of this hydrophilic MOF, the water/ethanol separation via pervaporation was improved by increasing the water flux from 0.24 kg m−2 h−1 for bare PI up to 0.43 kg m−2 h−1 with 40 wt% Cu3(BTC)2 MMM without significant changes in the separation factor (>200). Due to their selective water permeation, these MMMs have been used to displace equilibrium in the esterification of acetic acid with ethanol. By coupling separation by membrane and the reaction in the same device, the conversion obtained at the same feed rate and catalyst loading was higher than that achieved without any membrane. At 70 °C the membrane reactor reached a conversion of 70%, higher than the equilibrium value (66%).