Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Repisalud
Publication Artículo científico (JournalArticle)

Communication in a Human biomonitoring study: Focus group work, public engagement and lessons learnt in 17 European countries

  • Exley, Karen
  • Cano, Noemi
  • Aerts, Dominique
  • Biot, Pierre
  • Casteleyn, Ludwine
  • Kolossa-Gehring, Marike
  • Schwedler, Gerda
  • Castaño, Argelia
  • Angerer, Jürgen
  • Koch, Holger M
  • Esteban-Lopez, Marta
  • Schoeters, Greet
  • Den Hond, Elly
  • Horvat, Milena
  • Bloemen, Louis
  • Knudsen, Lisbeth E
  • Joas, Reinhard
  • Joas, Anke
  • Dewolf, Marie-Christine
  • Van de Mieroop, Els
  • Katsonouri, Andromachi
  • Hadjipanayis, Adamos
  • Černá, Milena
  • Krskova, Andrea
  • Becker, Kerstin
  • Fiddicke, Ulrike
  • Seiwert, Margarete
  • Mørck, Thit A
  • Rudnai, Peter
  • Középesy, Szilvia
  • Cullen, Elizabeth
  • Kellegher, Anne
  • Gutleb, Arno C
  • Fischer, Marc E
  • Ligocka, Danuta
  • Kamińska, Joanna
  • Namorado, Sónia
  • Reis, M Fátima
  • Lupsa, Ioana-Rodica
  • Gurzau, Anca Elena
  • Halzlova, Katarina
  • Jajcaj, Michal
  • Mazej, Darja
  • Tratnik, Janja Snoj
  • Huetos, Olga
  • Lopez-Herranz, Ana
  • Berglund, Marika
  • Larsson, Kristin
  • Sepai, Ovnair
A communication strategy was developed by The Consortium to Perform Human Biomonitoring on a European Scale (COPHES), as part of its objectives to develop a framework and protocols to enable the collection of comparable human biomonitoring data throughout Europe. The framework and protocols were tested in the pilot study DEMOCOPHES (Demonstration of a study to Coordinate and Perform Human biomonitoring on a European Scale). The aims of the communication strategy were to raise awareness of human biomonitoring, encourage participation in the study and to communicate the study results and their public health significance. It identified the audiences and key messages, documented the procedure for dissemination of results and was updated as the project progressed. A communication plan listed the tools and materials such as press releases, flyers, recruitment letters and information leaflets required for each audience with a time frame for releasing them. Public insight research was used to evaluate the recruitment material, and the feedback was used to improve the documents. Dissemination of results was coordinated in a step by step approach by the participating countries within DEMOCOPHES, taking into account specific national messages according to the needs of each country. Participants received individual results, unless they refused to be informed, along with guidance on what the results meant. The aggregate results and policy recommendations were then communicated to the general public and stakeholders, followed by dissemination at European level. Several lessons were learnt that may assist other future human biomonitoring studies. Recruitment took longer than anticipated and so social scientists, to help with community engagement, should be part of the research team from the start. As a European study, involving multiple countries, additional considerations were needed for the numerous organisations, different languages, cultures, policies and priorities. Therefore, communication documents should be seen as templates with essential information clearly indicated and the option for each country to tailor the material to reflect these differences. Future studies should consider setting up multidisciplinary networks of medical professionals and communication experts, and holding training workshops to discuss the interpretation of results and risk communication. Publicity and wide dissemination of the results helped to raise awareness of human biomonitoring to the general public, policy makers and other key stakeholders. Effective and timely communication, at all stages of a study, is essential if the potential of human biomonitoring research to improve public health is to be realised.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Soluciones demostrativas para reducir la contaminación acústica en las áreas industriales mediante la utilización de tecnologías de acabados en los materiales textiles: Proyecto LIFE 09/ENV/ES/000461-NOISEFREETEX

  • del Rey, Romina|||0000-0001-5907-0677
  • Alba, Jesus|||0000-0002-4188-854X
  • Blanes, María
  • Molla, Korina
  • Marco, Bruno
  • Fallarella, Enrico
  • Peruzzi, Francesca
  • Sanchis Rico, Vicente Jorge
  • Carrasco, Felipe
[ES] El proyecto europeo LIFE NOISEFREETEX se ubica dentro del programa de Environment Policy and Governance , en el área de ruido . Tiene como objetivo validar las soluciones demostrativas para reducir la contaminación acústica fundamentalmente en las zonas industriales próximas a las zonas urbanas. Con el propósito de minimizar el impacto acústico ambiental, estas soluciones basadas en materiales textiles se utilizan como elementos de construcción, bien en las paredes de las instalaciones industriales, bien en suelos y techos, así como también en pantallas acústicas. Una de las novedades que plantea este proyecto es la incorporación de velos de nanofibras textiles (sintéticos y naturales) para la mejora de soluciones de absorción sonora y aislamiento acústico. Ya de entrada los materiales textiles son, principalmente, sustratos ligeros, resistentes y adaptables que pueden ser tratados mediante procesos de acabado para mejorar sus propiedades básicas. Al utilizar nanofibras estos beneficios se agudizan. Además, dadas sus características, estos materiales son ideales para la disminución del impacto paisajístico. Los resultados de este proyecto son los siguientes. Se han concretado varias soluciones textiles que reducen el espesor efectivo del material, manteniendo sus condiciones absorbentes. Gracias a ello se ha conseguido generar una pantalla acústica con valores altos de absorción, reduciendo los espesores. Además, se ha diseñado una aplicación informática de libre distribución que permite obtener la absorción y el aislamiento acústico de pantallas diseñadas con estos materiales., [EN] The European project called LIFE NOISEFREETEX is in the context of the program «Environment Policy and Governance», in the field of noise. The main objective of this project is to validate new solutions which are going to use to reduce noise pollution, mainly, in industrial areas close to urban areas. These acoustic solutions are made from textile materials and will be used as building elements in the industrial installations, as part of floors and ceilings or as acoustic barriers. One of the novelties offered by this project is the incorporation of nanofiber textiles veils (synthetic and natural) in order to improve the sound absorption and the acoustic insulation of the solutions under test. The textile materials are usually lightweight, resilient and adaptable. These properties allow that these materials could be treated by finishing processes in order to improve their basic properties. If we have got a finishing with a nanofiber veil, the improvements will be greatest. Further, these kinds of materials are ideal for reducing of the impact on the landscape. Next, some of the results obtained in this project are listed: Several textile solutions have been validated. In these solutions, the effective thickness has been reduced without losing sound absorption properties, so an acoustic barrier with high values of sound absorption, reducing the thickness, has been got. Besides, a software application freely distributed has been designed. This tool (software) allows to obtain sound absorption and acoustic insulation of acoustic barriers designed using these kinds of materials., Este proyecto ha sido financiado gracias al programa de proyectos europeos LIFE. Project LIFE09 ENV/ES/461: NOISEFREETEX-«DEMONSTRATIVE SOLUTIONS TO REDUCE NOISE POLLUTION IN INDUSTRIAL AREAS, USING FINISHING TECHNOLOGIES IN TEXTILE MATERIALS»
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Small-sized reverberation chamber for the measurement of sound absorption

  • del Rey, Romina|||0000-0001-5907-0677
  • Alba, Jesus|||0000-0002-4188-854X
  • Bertó Carbó, Laura
  • Gregori, A.
[ES] Cámara reverberante de tamaño reducido para medidas de la absorción sonora. En este trabajo se muestra el diseño, construcción, calibración y automatización de una cámara reverberante para pequeñas muestras. Se ha buscado un equilibro entre la reducción de tamaño de las muestras para disminuir los costes de fabricación de materiales, y el volumen adecuado que permita obtener valores fiables a determinadas frecuencias. La cámara reverberante construida tiene 1.12 m3 de volumen y permite la medida de muestras de 0.3 m2. La colocación de difusores para aumentar el grado de difusión, y la automatización de las medidas, disminuyen los errores de ensayo. Se muestran también diferentes campañas comparativas de medidas en la cámara reverberante para pequeñas muestras y en la cámara normalizada. Puede verse un buen grado de ajuste entre ambas dentro del rango de frecuencias válido. Por tanto, se muestra un pequeño laboratorio que permite comparar muestras y tomar decisiones, antes de realizar la fabricación de grandes tamaños., [EN] This paper presents the design, construction, calibration and automation of a reverberation chamber for small samples. A balance has been sought between reducing sample size, to reduce the manufacturing costs of materials, and finding the appropriate volume of the chamber, to obtain reliable values at high and mid frequencies. The small-sized reverberation chamber, that was built, has a volume of 1.12 m3 and allows for the testing of samples of 0.3 m2. By using diffusers, to improve the diffusion degree, and automating measurements, we were able to improve the reliability of the results, thus reducing test errors. Several comparison studies of the measurements of the small-sized reverberation chamber and the standardised reverberation chamber are shown, and a good degree of adjustment can be seen between them, within the range of valid frequencies. This paper presents a small laboratory for comparing samples and making decisions before the manufacturing of larger sizes., This project involved the contribution of the European Union’s financial instrument, LIFE: ‘LIFE 09 ENV/ES/461: Demonstrative solutions to reduce noise pollution in industrial, using finishing technologies in textile materials’ and that of the European project ‘WOOL4BUILD ECO/13/630249/SI2.681252, CIP-ECO-INNOVATION: Improved isolation material for eco-building based on natural wool’.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultrafine and nanoparticle formation and emission mechanisms during laser processing of ceramic materials

  • Fonseca, A.S.
  • Viana, M.
  • Querol, X.
  • Moreno, N.
  • de Francisco, I.
  • Estepa, C.
  • de la Fuente, G.F.
The use of laser technology in the ceramic industry is undergoing an increasing trend, as it improves surface properties. The present work aimed to assess ultrafine and nanoparticle emissions from two different types of laser treatments (tile sintering and ablation) applied to two types of tiles. New particle formation mechanisms were identified, as well as primary nanoparticle emissions, with concentrations reaching up to 6.7 x 10(6) particles Cm-3 and a mean diameter of 18 nm. Nanoparticle emission patterns were strongly dependent on temperature and raw tile chemical composition. Nucleation events were detected during the thermal treatment independently of the laser application. TOM images evidenced spherical ultrafine particles, originating from the tile melting processes. When transported across the indoor environment, particles increased in size (up to 38 nm) with concentrations remaining high (2.3 x 10(6) particles cm(-3)), Concentrations of metals such as Zn, Pb, Cu, Cr, As and al were found in particles < 250 nm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Process-generated nanoparticles from ceramic tile sintering: Emissions, exposure and environmental release

  • Fonseca, A.S.
  • Maragkidou, A.
  • Viana, M.
  • Querol, X.
  • Hameri, K.
  • de Francisco, I.
  • Estepa, C.
  • Borrell, C.
  • Lennikov, V.
  • de la Fuente, G.F.
The ceramic industry is an industrial sector in need of significant process changes, which may benefit from innovative technologies such as laser sintering of ceramic tiles. Such innovations result in a considerable research gap within exposure assessment studies for process-generated ultrafine and nanoparticles. This study addresses this issue aiming to characterise particle formation, release mechanisms and their impact on personal exposure during a tile sintering activity in an industrial-scale pilot plant, as a follow-up of a previous study in a laboratory-scale plant. In addition, possible particle transformations in the exhaust system, the potential for particle release to the outdoor environment, and the effectiveness of the filtration system were also assessed. For this purpose, a tiered measurement strategy was conducted. The main findings evidence that nanoparticle emission patterns were strongly linked to temperature and tile chemical composition, and mainly independent of the laser treatment. Also, new particle formation (from gaseous precursors) events were detected, with nanoparticles <30 nm in diameter being formed during the thermal treatment. In addition, ultrafine and nano-sized airborne particles were generated and emitted into workplace air during sintering process on a statistically significant level. These results evidence the risk of occupational exposure to ultrafine and nanoparticles during tile sintering activity since workers would be exposed to concentrations above the nano reference value (NRV; 4 x 10(4) cm(-3)), with 8-hour time weighted average concentrations in the range of 1.4 x 10(5) cm(-3) and 5.3 x 10(5) cm(-3). A potential risk for nanoparticle and ultrafine particle release to the environment was also identified, despite the fact that the efficiency of the filtration system was successfully tested and evidenced a >87% efficiency in particle number concentrations removal.
Repositorio Digital UPCT
Publication Artículo científico (JournalArticle)

Marble waste and pig slurry increment soil quality and reduce metal availability in a tailing pond

  • Gómez López, María Dolores
  • Zornoza Belmonte, Raúl
  • Faz Cano, Ángel
  • Martínez Martínez, Silvia
  • Acosta Avilés, José Alberto
  • Avilés Marín, Silvia Mónica
Tailing ponds pose environmental hazards, such as toxic metals reaching water sources through wind and water erosion and leaching. These abandoned mine sites contain materials with high contents of Fe- oxyhydroxides, sulfides, and heavy metals. As a consequence, soils have null vegetation and low soil organic matter. In this study, various physicochemical properties, together with microbial biomass carbon and available metals, were measured before and six months after application of marble waste (6.7 kg m-2), raw pig slurry (4.3 L m-2), and solid phase pig slurry (7 kg m-2) as reclamation strategy in a tailing pond in southeastern Spain, to reduce hazards for the environment and human health. Results showed that aggregate stability, pH, organic carbon, total nitrogen, cation exchange capacity, available phosphorus, exchangeable potassium and microbial biomass carbon increased with the application of the amendments, while available metals and metalloid (As, Cd, Pb and Zn) drastically decreased (90-99%). This study confirms the high effectiveness of initial applications of marble wastes together with pig slurry to initialize the recovery of ecosystems in bare mine soils under Mediterranean semiarid conditions., This work wasfunded by the European UnionLIFE+ project MIPOLARE (LIFE09 ENV/ES/000439). J.A. Acosta acknowledges a “Saavedra Fajardo” contract from Comunidad Autónoma de Murcia (Spain).
Repositorio Digital UPCT
Publication Artículo científico (JournalArticle)

Rehabilitación de una presa de residuos mineros mediante la aplicación de lodo de mármol y purín de cerdo para el desarrollo de una fitoestabilización asistida

  • Zornoza Belmonte, Raúl
  • Martínez Martínez, Silvia
  • Acosta Avilés, José Alberto
  • Gómez López, María Dolores
  • Muñoz García, María Ángeles
  • Sánchez Medrano, Rafael
  • Murcia Navarro, Francisco José
  • López Martínez, Elena
  • Espín de Gea, Antonio
Abandoned tailings ponds produce environmental and human health hazards due to the transfer of heavy metals through wind and water erosion or leaching. To reduce these hazards, a reclamation strategy has been developed on a tailings pond based on aided phytostabilization. In 2011 marble mud and pig slurry were applied to the surface of a tailings pond and in the spring of 2012 thirteen native vegetal species were introduced. The evolution of different soil properties and the bio-available fraction of the heavy metals Cd, Pb and Zn were monitored for two years (2012-2013). The results showed that the pH, aggregate stability, organic carbon, total nitrogen and cation exchange capacity increased after the application of the amendments and the growth of vegetation, whilst the bio-available fraction of the heavy metals drastically decreased (90-99%). Thus, the strategy followed proved to be positive for reducing the availability of heavy metals and improving soil quality and fertility. These results are promising in areas with extractive activity of carbonated materials, since the generated waste can be used for the reclamation of soils affected by heavy metals, transforming a residual material into a useful by-product., Este trabajo ha sido cofinanciado por el proyecto de la Unión Europea LIFE+ MIPOLARE (LIFE09 ENV/ES/000439).
Repositorio Digital UPCT
Publication Contribución de congreso (ConferenceOutput)

De zona contaminada a zona recreativa. Rehabilitación ambiental de un depósito minero contaminado

  • Parra, Alfonso
  • Martínez Martínez, Silvia
  • Zornoza Belmonte, Raúl
  • Acosta Avilés, José Alberto
  • Faz Cano, Ángel
  • Gómez López, María Dolores
This study is part of the already finished LIFE+ project MIPOLARE ENV/ES/000439. The main objective of this project was the environmental remediation of contaminated mining ponds, in the Sierra de Cartagena-La Union,. The environmental thematic itinerary defined in Santa Antonieta mining pond (1 ha extension) is presented in this work. The rehabilitation was carried out by using amendments, which allowed the chemical and structural stability of the pond surface and promoted the growth of native vegetation in acidic soils contaminated by metals. For the thematic itinerary a net of concrete trails and a landscape design was developed. Didactic plots containing different types of restored and unrestored soils were placed in the central trail, also interpretive panels to explain the rehabilitation activities, the history and heritage of the mining district, the risks associated with mining operations, and the main characteristics of the ecosystem, etc. were placed along the trails. The environmental itineraries include 3 viewpoints, from where you can see an extraordinary view of the mining area, and the difference between reclaimed and contaminated areas. This itinerary was defined for recreational and educational purposes, and it have already been visited by numerous schools and associations., This study is part of the already finished LIFE+ project MIPOLARE ENV/ES/000439
Repositorio Digital UPCT
Publication Artículo científico (JournalArticle)

Decision Pattern for Changing Polluted Areas into Recreational Places

  • Parra Torres, Alfonso
  • Conesa Gallego, Encarnación
  • Zornoza Belmonte, Raúl
  • Faz Cano, Ángel
  • Gómez López, María Dolores
There are many enclaves in the Mediterranean basin with soils contaminated with heavy metal(loid)s, most of these in natural areas of great beauty that have suffered the consequences of industrial and mining activity for years. These soils pose a risk to human and animal health due to the transfer of metal(loid)s condemning these areas to isolation. The rehabilitation by means of phytoremediation is one of the most used techniques, but phytoremediation must be part of a comprehensive strategy of steps that guide owners and administrations in the recovery of ecosystem services. An easily replicable decision-making methodology is defined, considering the initial conditions, the preferences of the decision makers or typologies from among six possibilities and the different models of use, typified in 13 categories. As a result, a landscape is obtained that integrates phytostabilization and areas with recreational and/or educational uses. Two case studies from the southeast of Spain are presented as validation, a deposit of mining sludge residues and the channel of a river contaminated by industrial discharges. Both enclaves are included in the tourist and cultural offer of their area, thus achieving an environmental and socioeconomic benefit and have been visited by more than 1000 people in a two-year period., To the European projects of the Life + program: LIFE09 ENV/ES/000439UE Postmined polluted landscapes reclamation by means of valorization of different residues—MIPOLARE(https://mipolare.eu/Default.aspx, accessed on 14 February 2022) and LIFE11 ENV/ES/506 Rehabilitation of a heavy metal contaminated riverbed by phytoextraction technique (http://liferiverphy.eu/ web/, accessed on 14 February 2022), for the financing of the case studies.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Treatment of swine manure: case studies in European’s N-surplus areas

  • García-González, Maria Cruz
  • Riaño, Berta
  • Teresa, Marta
  • Herrero, Eva
  • Ward, Alastair James
  • Provolo, Giorgio
  • Moscatelli, Giuseppe
  • Piccinini, Sergio
  • Bonmatí, August
  • Bernal, María Pilar
  • Wiśniewska, Hanna
  • Proniewicz, Marcin
In this study, eight different manure treatment plants were monitored. The plants were four on-farm and four centralized treatment plants, all of them at full-scale level. Assessment includes a total of seven pre-treatment and process units as follows: mechanical separation, with and without coagulant and flocculant addition, pasteurization, nitrification-denitrification, anaerobic digestion, and composting. The plants are located in nutrient surplus areas of three European Member States (Spain, Italy and Denmark), the majority of these areas being Nitrate Vulnerable Zones (NVZ). Results presented herein are data collected over a six-month period and comprise performance data of the treatment plants, pathogen indicators (E.coli and Salmonella) and greenhouse gas (GHG) emissions data under two scenarios: 1) the baseline scenario and 2) the treatment plant scenario. The assessment includes GHG emissions of the storage facilities, transportation, and subsequent intermediate storage, electric consumption, electric production, composting, and land application. All treatment plants studied generated a significant reduction in GHG emissions (between 53 and 90 %) in comparison to the baseline scenario. Organic matter and total solids (TS) content in manure were also greatly reduced, with values ranging between 35-53 % of chemical oxygen demand (COD) and, 24-61 % of TS for anaerobic digestion (AD) treatment plants, 77-93 % COD and 70 % TS in the case of AD combined with nitrogen (N)- removal unit plants. Nitrogen concentrations were also greatly reduced (between 65-85 %) total Kjeldahl nitrogen (TKN) and 68-83 % ammonium (NH4+-N)) in plants with N-removal units., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Treatment of swine manure: case studies in European’s N-surplus areas

  • García-González, Maria Cruz
  • Riaño, Berta
  • Teresa, Marta
  • Herrero, Eva
  • Ward, Alastair James
  • Provolo, Giorgio
  • Moscatelli, Giuseppe
  • Piccinini, Sergio
  • Bonmatí, August
  • Bernal, María Pilar
  • Wiśniewska, Hanna
  • Proniewicz, Marcin
In this study, eight different manure treatment plants were monitored. The plants were four on-farm and four centralized treatment plants, all of them at full-scale level. Assessment includes a total of seven pre-treatment and process units as follows: mechanical separation, with and without coagulant and flocculant addition, pasteurization, nitrification-denitrification, anaerobic digestion, and composting. The plants are located in nutrient surplus areas of three European Member States (Spain, Italy and Denmark), the majority of these areas being Nitrate Vulnerable Zones (NVZ). Results presented herein are data collected over a six-month period and comprise performance data of the treatment plants, pathogen indicators (E.coli and Salmonella) and greenhouse gas (GHG) emissions data under two scenarios: 1) the baseline scenario and 2) the treatment plant scenario. The assessment includes GHG emissions of the storage facilities, transportation, and subsequent intermediate storage, electric consumption, electric production, composting, and land application. All treatment plants studied generated a significant reduction in GHG emissions (between 53 and 90 %) in comparison to the baseline scenario. Organic matter and total solids (TS) content in manure were also greatly reduced, with values ranging between 35-53 % of chemical oxygen demand (COD) and, 24-61 % of TS for anaerobic digestion (AD) treatment plants, 77-93 % COD and 70 % TS in the case of AD combined with nitrogen (N)- removal unit plants. Nitrogen concentrations were also greatly reduced (between 65-85 %) total Kjeldahl nitrogen (TKN) and 68-83 % ammonium (NH4+-N)) in plants with N-removal units., info:eu-repo/semantics/publishedVersion