Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Partial state-of-charge mitigation in standalone photovoltaic hybrid storage systems

  • Sanz Gorrachategui, Iván
  • Bernal Ruiz, Carlos
  • Oyarbide Usabiaga, Estanis
  • Bono Nuez, Antonio
  • Artal Sevil, Sergio Jesús
  • Garayalde Pérez, Érik
  • Aizpuru Larrañaga, Iosu
  • Canales Segade, Jose María
Energy Storage in photovoltaic installations has increased in popularity in recent years due to the improvement in solar panel technology and energy storage systems. In several places where the grid is not available, in remote isolated rural locations or developing countries, isolated photovoltaic installations are one of the main options to power DC micro-grids. In these scenarios, energy storage elements are mandatory due to the natural day-night cycles and low irradiation periods. Traditionally, lead-acid batteries have been responsible for this task, due to their availability and low cost. However, the intermittent features of the solar irradiance patterns and load demand, generate multiple shallow charge–discharge cycles or high power pulses, which worsen the performance of these batteries. Some Hybrid Energy Storage Systems (HESSs) have been reported in the literature to enhance the lifetime and power capabilities of these storage elements, but they are not intended to overcome the Partial State of Charge (PSoC) issue caused by daily cycles, which has an effect on the short and mid-term performance of the system. This paper studies the impact of the already proposed HESSs on PSoC operation, establishing the optimal hybrid ratios, and implementing them in a real installation with a satisfactory outcome.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of Li-ion battery degradation using self-organizing maps

  • Pastor-Flores, P.
  • Bernal-Ruiz, C.
  • Sanz-Gorrachategui, I.
  • Bono-Nuez, A.
  • Martin-Del-Brio, B.
  • Artal-Sevil, J.S.
  • Perez-Cebolla, F.J.
This paper proposes a new methodology to identify the different degradation processes of Li-Ion battery cells. The goal of this study is to determine if different degradation factors can be separated by waveform analysis from aged cells with similar remaining capacity. In contrast to other works, the proposed method identifies the past operating conditions in the cell, regardless of the actual State of Health. The methodology is based on a data-driven approach by using a SOM (Self-organizing map), an unsupervised neural network. To verify the hypothesis a SOM has been trained with laboratory data from whole data cycles, to classify cells concerning their degradation path and according to their discharge voltage patterns. Additionally, this new methodology based on the SOM allows discriminating groups of cells with different cycling conditions (based on depth of discharge, ambient temperature and discharge current). This research line is very promising for classification of used cells, not only depending on their current static parameters (capacity, impedance), but also the battery use in their past life. This will allow making predictions of the Remaining Useful Life (RUL) of a battery with greater precision.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Online voltage prediction using gaussian process regression for fault-tolerant photovoltaic standalone applications

  • Sanz Alcaine, José Miguel
  • Sebastián, Eduardo
  • Sanz-Gorrachategui, Iván
  • Bernal-Ruiz, Carlos
  • Bono-Nuez, Antonio
  • Pajovic, Milutin
  • Orlik, Philip V.
This paper presents a fault detection system for photovoltaic standalone applications based on Gaussian Process Regression (GPR). The installation is a communication repeater from the Confederacion Hidrografica del Ebro (CHE), public institution which manages the hydrographic system of Aragon, Spain. Therefore, fault-tolerance is a mandatory requirement, complex to fulfill since it depends on the meteorology, the state of the batteries and the power demand. To solve it, we propose an online voltage prediction solution where GPR is applied in a real and large dataset of two years to predict the behavior of the installation up to 48 hour. The dataset captures electrical and thermal measures of the lead-acid batteries which sustain the installation. In particular, the crucial aspect to avoid failures is to determine the voltage at the end of the night, so different GPR methods are studied. Firstly, the photovoltaic standalone installation is described, along with the dataset. Then, there is an overview of GPR, emphasizing in the key aspects to deal with real and large datasets. Besides, three online recursive multistep GPR model alternatives are tailored, justifying the selection of the hyperparameters: Regular GPR, Sparse GPR and Multiple Experts (ME) GPR. An exhaustive assessment is performed, validating the results with those obtained by Long Short-Term Memory (LSTM) and Nonlinear Autoregressive Exogenous Model (NARX) networks. A maximum error of 127 mV and 308 mV at the end of the night with Sparse and ME, respectively, corroborates GPR as a promising tool.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of a Thermoelectric Generation system based on Differential-Power Processing architecture under non-uniform temperature conditions

  • Artal-Sevil, J.S.
  • Bernal-Ruiz, C.
  • Beyza, J.
  • Bravo, V.M.
This paper presents a Differential Power Processing (DPP) architecture applied to series-connected thermoelectric generators (TEG). Currently, thermoelectric technology is being considered as a promising power generation technology that can be used to recover waste heat energy. Thus, a thermoelectric generation system is studied under non-uniform temperature conditions in multiple TEG devices. The main objective is to allow each thermoelectric sub-module to reach its maximum power point more quickly. The purpose has been to improve the maximum power point tracking (MPPT) in each sub-module, thus it is possible to increase the efficiency with respect to the traditional method based on a global MPPT. Differential Power converters have been implemented in each TEG sub-module to provide an effective solution and mitigate the impact of the mismatch in the power obtained. The DPP architecture consists of a small micro-converter, at the submodular level, applied to the thermoelectric cell. The control algorithm is oriented to polarize each TEG device at its optimal point, which allows us an active balancing among the different TEG sub-modules regardless of the operating temperature. Matlab-Simulink has been the software used to develop the TEG module-Array.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Lithium-Ion Battery Parameter Identification via Extremum Seeking Considering Aging and Degradation

  • Sanz-Gorrachategui, Iván
  • Pastor-Flores, Pablo
  • Bono-Nuez, Antonio
  • Ferrer-Sánchez, Cora
  • Guillén-Asensio, Alejandro
  • Bernal-Ruiz, Carlos
Battery parameters such as State of Charge (SoC) and State of Health (SoH) are key to modern applications; thus, there is interest in developing robust algorithms for estimating them. Most of the techniques explored to this end rely on a battery model. As batteries age, their behavior starts differing from the models, so it is vital to update such models in order to be able to track battery behavior after some time in application. This paper presents a method for performing online battery parameter tracking by using the Extremum Seeking (ES) algorithm. This algorithm fits voltage waveforms by tuning the internal parameters of an estimation model and comparing the voltage output with the real battery. The goal is to estimate the electrical parameters of the battery model and to be able to obtain them even as batteries age, when the model behaves different than the cell. To this end, a simple battery model capable of capturing degradation and different tests have been proposed to replicate real application scenarios, and the performance of the ES algorithm in such scenarios has been measured. The results are positive, obtaining converging estimations both with new and aged batteries, with accurate outputs for the intended purpose.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Remaining useful life estimation of used li-ion cells with deep learning algorithms without first life information

  • Sanz-Gorrachategui, I.
  • Wang, Y.
  • Guillén-Asensio, A.
  • Bono-Nuez, A.
  • Martin-del-Brio, B.
  • Orlik, P. V.
  • Pastor-Flores, P.
The second life use of lithium-ion batteries has gained significant attention in recent years, driven by the potential to repurpose cells from electric vehicles for less demanding applications. A critical aspect of this repurposing is accurately estimating the Remaining Useful Life (RUL) of the batteries. Traditional techniques often rely on data from the battery’s first life, which may not be available in practical scenarios. To address this issue, we propose a data-driven method for RUL estimation that does not depend on first-life information. Our approach considers a realistic scenario where an aged battery cell, lacking previous usage data, is evaluated for second life use through a limited number of test cycles. We compute features such as incremental capacity curves, and other health indicators from the measured voltage and current waveforms of the used cell. These features are automatically processed by deep learning algorithms, including Convolutional Neural Networks (CNNs) and Long Short-Term Memory (LSTM) networks. This methodology achieves an average error of only 62 cycles for cells with a lifespan of up to 1200 cycles and a RUL error of less than 10% for deeply aged batteries. These results outperform state-of-the-art algorithms that utilize data from the cell’s entire lifespan, demonstrating the efficacy and robustness of this approach.