Skip to main content

ANALISIS DEL COMPORTAMIENTO DE MATERIALES Y BOBINAS SUPERCONDUCTORAS PARA APLICACIONES ELECTRICAS DE POTENCIA.

MAT2011-22719

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vortex pinning by intrinsic correlated defects in Fe1-ySe

  • Amigó, M.L.
  • Crivillero, V.A.
  • Franco, D.G.
  • Badía-Majós, A.
  • Guimpel, J.
  • Nieva, G.
We present a study on the transport and magnetic properties of superconducting Fe1-ySe single crystals. In the superconducting state, the in-plane electrical resistivity of the crystal is measured for fields up to 16 T and as a function of field direction, in order to understand how the vortex dynamics is affected by the presence of defects. A strong deviation from the slightly anisotropic crystal (electronic anisotropy constant 7 ~ 1.08) is observed as a steep angular dependence, which is interpreted as a signature of the presence of correlated defects. The influence of the correlated defects on the critical current is studied through the angular dependence of the magnetization, and compared to numerical simulations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of ball milling and fatty acid addition on the properties of MgB2 wires

  • Laliena, C.
  • Martinez, E.
  • Angurel, L.A.
  • Navarro, R.
Improved inductive critical current density Jc, at medium and high magnetic fields B, has been obtained in MgB2 wires made from ball-milled and carbon-doped precursors. The analyzed Fe-sheathed monofilamentary wires have been manufactured by the powder-in-tube and in-situ methods. Carbon doping has been achieved by the addition of fatty acids, in particular oleic acid (C18H34O2). In order to enhance the Jc(B) performance and the homogeneity of the wires, we have analyzed the combined effects of ball milling and oleic acid addition. The changes in the microstructure, phase composition, and superconducting properties for different milling parameters and the fixed amount of acid addition have been analyzed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dendritic flux avalanches in a superconducting MgB2 tape

  • Qureishy, T.
  • Laliena, Carlos
  • Martínez, Elena
  • Qviller, A.J.
  • Vestgården, J.I.
  • Johansen, T.H.
  • Navarro, Rafael
  • Mikheenko, P.
Tapes of MgB2 with high critical current have a significant technological potential, but can experience operational breakdown due to thermomagnetic instabilities. Such events are routinely registered by magnetisation measurements, but were never observed by direct imaging techniques. Here we report magneto-optical imaging visualisation of a tape with reduced thickness and enhanced critical current density. The spatial structure of the thermomagnetic avalanche events was resolved, and the reproducibility and nucleation thresholds were determined. Avalanches appearing at low fields are small intrusions at the tape edges, while larger fields create more extensive avalanches having dendritic structures similar to those observed in thin-film superconductors. In contrast to dendritic avalanches in thin films, the avalanches in the tapes show reproducibility to a larger extent.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Experimental and numerical analysis of quench propagation on MgB 2 tapes and pancake coils

  • Pelegrín,J.
  • Romano,G.
  • Martínez,E.
  • Angurel,L. A.
  • Navarro,R.
  • Ferdeghini,C.
  • Brisigotti,S.
  • Grasso,G.
  • Nardelli,D.
In the design and feasibility of electric power applications with MgB2 conductors, thermal conductivity plays an important role. In composite wires and tapes it is mainly determined by the amount of stabilizer (usually copper), while for coils the electric insulation and epoxy binder characteristics are added. In this paper we present results on quench development and propagation on isolated superconducting tapes and small single pancake coils cooled by thermal conduction, for three types of MgB2 tape with different stabilizations. The quench parameters at different temperatures, such as minimum quench energy (MQE), minimum propagation zone (MPZ) and quench propagation velocity (vp), are reported. A complete electrical and thermal characterization of the superconducting tapes and of non-superconducting materials used in the coil manufacture has been made. With these data, numerical computational models using finite element simulations have been performed for isolated wires and single pancake coils, and the results of the relevant quench parameters have been compared with the measured values.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of ball milling on the local magnetic flux distribution and microstructure of in situ Fe/MgB2 conductors

  • Laliena, C.
  • Qureishy, T.
  • Martínez, E.
  • Navarro, R.
  • Mikheenko, P.
  • Johansen, T.H.
  • Kovác, P.
The effects of the precursor milling energy on the superconducting and microstructural homogeneity of Fe-sheathed MgB2 monocore wires and tapes have been investigated. The conductors were produced by the powder-in-tube method using drawing and rolling deformation methods and in situ reaction. Combined magneto-optical, structural and magnetization measurements were performed on MgB2 superconducting tapes prepared from differently milled precursors revealing hidden mechanisms controlling their critical current density. Local degradation of the superconducting properties observed in some analysed conductors has been identified and correlated with microstructural observations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhanced quench propagation in 2G-HTS coils co-wound with stainless steel or anodised aluminium tapes

  • Núñez-Chico, A. B.
  • Martínez, E.
  • Angurel, L. A.
  • Navarro, R.
Early quench detection and thermal stability of superconducting coils are of great relevance for practical applications. Magnets made with second generation high temperature superconducting (2G-HTS) tapes present low quench propagation velocities and therefore slow voltage development and high local temperature rises, which may cause irreversible damage. Since quench propagation depends on the anisotropy of the thermal conductivity, this may be used to achieve an improvement of the thermal stability and robustness of 2G-HTS coils. On pancake type coils, the thermal conductivity along the tapes (coil''s azimuthal direction) is mostly fixed by the 2G-HTS tape characteristics, so that the reduction of anisotropy relies on the improvement of the radial thermal conductivity, which depends on the used materials between superconducting tapes, as well as on the winding and impregnation processes. In this contribution, we have explored two possibilities for such anisotropy reduction: by using anodised aluminium or stainless steel tapes co-wound with the 2G-HTS tapes. For all the analysed coils, critical current distribution, minimum quench energy values and both tangential and radial quench propagation velocities at different temperatures and currents are reported and compared with the results of similar coils co-wound with polyimide (Kapton®) tapes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Composite Bi-2212/Ag Superconductors Grown by Laser Travelling Floating Zone at Low Rates

  • Diez, J.C.
  • Sotelo, A.
  • Rasekh, S.
  • Amaveda, H.
  • Torres, M.A.
  • Bosque, P.
  • Chocarro, C.
  • Madre, M.A.
Well-textured Bi2.02Sr2.02Ca0.98Cu1.99O x /2.9 wt % Ag composite samples have been grown by the laser floating zone at very low rates (1, 3, and 5 mm/h). The as-grown samples present superconducting behavior, as a result of being composed by long and well-textured Bi-2212 grains as major phase. After annealing, the samples do not dramatically increase their J C. This effect has been associated with the presence of long cracks along the ab planes of the superconducting grains. Even after annealing, the cracks have not been totally removed and, as a consequence, the critical current of the samples after the thermal treatment has only been improved in around 50 %, compared with the as-grown samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of current polarity on BSCCO/Ag ceramics textured by electrically assisted laser floating zone

  • Costa, F.M.
  • Rasekh, S.
  • Ferreira, N.M.
  • Sotelo, A.
  • Diez, J.C.
  • Madre, M.A.
Bi-2212/Ag superconducting ceramics were grown using the electrically assisted laser floating zone (EALFZ) technique. The main goal was improving the superconducting properties by applying an electrical current through the sample during the solidification process. The effect of a 100 mA current intensities in two configurations were studied: (i) direct current (connecting the seed rod to the positive pole and the feed to the negative one) and (ii) reverse current (positive pole connected to the feed rod and negative to the seed one). The resulting textured cylindrical bars were annealed in order to obtain the superconducting phases. A strong correlation between current polarity, grain alignment and superconducting properties was observed. The rods grown under direct current exhibit higher critical current density (∼3000 A/cm2) than the ones grown under conventional method (∼2300 A/cm2) or under reverse current condition (∼35 A/cm2). The superior value obtained for the direct current results from a better grain alignment and fewer amount of second phases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Effect of postannealing process on Bi2Sr2.1Ca 0.9Cu2O8+δ textured superconductors

  • Sotelo, A.
  • Madre, M.A.
  • Rasekh, S.
  • Constantinescu, G.
  • Torres, M.A.
  • Diez, J.C.
Bi-2212 samples prepared by the classical solid-state method have been grown from the melt using the Laser Floating Zone (LFZ) method. They have shown good grain alignment and transport critical current densities (J c ). After postannealing processes designed to produce the Bi-2212 phase controlled decomposition, J c values have been increased in an important manner. Maximum values have been achieved when samples were thermally treated at 680 °C for 168 h with improvements around 80 %, compared with the original textured samples. The results clearly indicate that postannealing processes, when adequately controlled, produce the formation of effective pinning centers which are responsible for the increase in the measured J c values.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Textured Pb-Doped Bi-2212 Superconductors for Current Limiters

  • Sotelo, A.
  • Rasekh, Sh.
  • Amaveda, H.
  • Bosque, P.
  • Torres, M.A.
  • Madre, M.A.
  • Diez, J.C.
Bi2−x Pb x Sr2CaCu2O y (x = 0.0, 0.3, 0.4, and 0.5) textured materials have been prepared by the laser floating zone technique. The E − I curves showed and increase of the slope of the normal to superconducting transition with Pb addition. The best values have been obtained for the 0.4 Pb-doped samples, around 16 at 77 K. In spite of this improvement, Pb addition decreased J C and T C in all cases. On the other hand, electrical characterization at lower temperatures has led to an impressive raise in the 0.4 Pb-doped samples, reaching n values around 31, and J C of about 3,000 A/cm 2, at 65 K. At the same time, the mechanical integrity of the vitreous precursor materials has been determined. All the obtained results clearly indicate that these precursors, when properly processed by the laser floating technique, are promising candidates for practical applications as current limiters.