Skip to main content

NANOCOMPUESTOS POLIMERICOS BASADOS EN SILICES MESOPOROSAS Y EN GRAFENO CON PRESTACIONES AVANZADAS

MAT2013-47972-C2-1-P

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mechanical and Transport Properties of Poly(propylene-co-1-heptene) Copolymers and Their Dependence on Monoclinic and/or Mesomorphic Polymorphs

  • García-Peñas, A.
  • Gómez-Elvira González, José Manuel
  • Lorenzo, Vicente
  • Pérez, Ernesto
  • Cerrada, María L.
Poly(propylene-co-1-heptene) copolymers have been evaluated in a wide 1-heptene content range. Two different polymorphs can be observed in this interval under the processing conditions imposed: monoclinic crystallites and mesomorphic entities. The unique presence of one or the other lattice at specific content or the coexistence of both of them at the intermediate composition interval is a key factor affecting some of the exhibited properties. The influence is observed in characteristics mainly dependent on either crystalline structure, like rigidity, or the amorphous regions, as location and intensity of glass transition. To get a deeper understanding, the transition from mesophase to monoclinic crystallites has also been studied by DSC and by WAXS and SAXS experiments using synchrotron radiation. It is observed that this transformation is only partial and just involves one-third of the initial ordered mesomorphic entities. Permeability to different gases is mainly dependent on amorphous content and hindrance that monoclinic or mesomorphic entities impose on those disordered regions., We acknowledge the financial support of MINECO-Spain (Projects MAT2013-47972-C2-1-P and MAT2013-47972-C2- 2-P). AG.-P. is also grateful to MICINN (Project MAT2010- 19883) for his FPI predoctoral grant. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Recycled Polyolefin Blends: Effect of Modified Natural Zeolite on their Properties and Morphology

  • Borovanska, Irena
  • Cerrada, María L.
  • Zipper, P.
  • Djoumaliisky, S
The purpose of this study is to investigate the effect of treated natural zeolite on the flow behavior, morphology, thermal, and mechanical properties in recycled polyolefin blends. A model polymer blend consisting of 95 wt% polyolefines and 5 wt% polystyrene was studied. Compositions from this recycled blend and dehydrated zeolite in a narrow concentration range (0–5 wt%) were treated with maleic anhydride-grafted polypropylene and initiator dicumyl peroxide. The compositions were characterized by capillary rheometry, wide-angle X-ray scattering, differential scanning calorimetry, scanning electron microscopy, and mechanical tests. The results show a compatibilizing effect of treated zeolite expressed by increase of shear viscosity and improvement of interfacial interactions and impact strength. The results can open wide possibilities for utilization of treated zeolite in recycling of unsorted polymer wastes., The authors are grateful for the financial support from the Bulgarian Ministry of Education and Science (project DTK 2010-02/7) and MINECO (Spain) (project MAT2013- 47972-C2-1-P). WAXS experiments were supported by Dr. Heinrich-Jörg-Stiftung of the University of Graz, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The exceptional magnetic inequivalence in helical form i of poly-1-pentene

  • Pérez, Ernesto
  • García-Peñas, A.
  • Arranz-Andrés, Javier
  • Gómez-Elvira, Javier
  • Gómez-Elvira González, José Manuel
  • Cerrada, María L.
A sample of isotactic poly-1-pentene has been synthesized by using a metallocene catalyst, and two specimens have been prepared displaying the most stable Form I of this polymer, reported to adopt a 3 helical conformation. The solid-state CNMR study of this helical form shows an exceptional splitting of the resonances, indicative of an important magnetic inequivalence in the unit cell. The maximum separation (amounting to 4.7 ppm) is obtained for carbon 2B: the methylene next to the terminal methyl in the lateral branch. This exceptional splitting is interpreted as originating from either intermolecular (packing) or intramolecular (conformational) differences (or both), leading to well non-equivalent sites for all the carbons. The comparative analysis of the relaxation times in the rotating frame between isotactic poly-1-pentene and isotactic polypropylene indicates that the two polymers display a rather similar relaxation behavior for both the crystalline and amorphous components., The financial support of MINECO (project MAT2013-47972-C2-1-P) is gratefully acknowledged. A. García-Peñas is also grateful to MICINN for his FPI predoctoral grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Visible and ultraviolet antibacterial behavior in PVDF-TiO<inf>2</inf> nanocomposite films

  • Muñoz-Bonilla, Alexandra
  • Kubacka, Anna
  • Fernández, M.
  • Ferrer, Manuel
  • Fernández-García, Marta
  • Cerrada, María L.
Highly efficient antibacterial nanocomposite films consisting of a commercially available poly(vinylidene difluoride) (PVDF) incorporating synthesized TiO<inf>2</inf> nanoparticles have been prepared with different anatase contents by a simple approach with absence of any solvent. These materials display powerful antimicrobial activity toward both Gram-negative and Gram-positive bacteria under UV and, surprisingly, visible lights. Their optical characterization has pointed out that absorption is significantly increased in the nanocomposites at the visible range, being this aspect behind the excellent capability exhibited against microorganisms., This work was supported by MINECO (projects MAT2013-47972-C2-1-P and PRI-PIBJP-2011-0914), the European Community’s Seventh Framework Programme (FP7/2007–2013) under Grant agreement n 312284, and Fundación General del CSIC (ComFuturo Programme). MINECO is also acknowledged for a Ramón y Cajal contract of AMB. We are very grateful to Arkema as supplier of the PVDF used in this study, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Harnessing synergies in tin-clay catalyst for the preparation of poly(ϵ-caprolactone)/halloysite nanocomposites

  • Lahcini, M.
  • Elhakioui, S.
  • Szopinski, D.
  • Neuer, B.
  • El Kadib, A.
  • Scheliga, F.
  • Raihane, M.
  • Baltá Calleja, Francisco José
  • Luinstra, G. A.
11 págs.; 9 figs.; 5 tabs., The first example of synergistic alkynyl-tin initiated ring-opening polymerization of cyclic ester in the presence of nanotubular silica particles is herein reported. Hydroxyl groups on the halloysite (HNTs) surface act as initiators for caprolactone polymerization and the resulting polymers are covalently grafted to the HNTs. The covalent anchorage of the poly(ϵ-caprolactone) (PCL) backbone to the HNTs ensures a high degree of interpenetration at the hybrid interface thereby allowing long-term stability of the PCL-grafted-HNTs suspension. Scanning electron microscopy analyses showed the uniform dispersion of the HNTs filler within the PCL matrix. The melt viscosity of the poly(ϵ-caprolactone)/HNTs composites decreases with increasing clay content. Thermal stability and microindentation hardness properties of the resulting nano-composites were significantly improved, as compared to native, non-reinforced PCL. 2016 Elsevier Ltd. All rights reserved., The study has been carried out with financial support from Alexander von Humboldt Foundation and from Hassan II Academy of Science and Technology of Morocco. FJBC gratefully acknowledges the MINECO, Spain (Grant MAT2013-47898-C2-1-R and MAT2013-47972-C2-1-P) for the generous support of this work., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Role of the Compatibilizer on the Microindentation Hardness of iPP/PC Blends

  • Hellati, A.
  • Douibi, A.
  • Boufassa, S.
  • Benavente, Rosario
  • Benachour, D.
  • Baltá Calleja, Francisco José
8 pags., 9 figs., 3 tabs., Blends of isotactic polypropylene (iPP) and polycarbonate (PC) with and without a compatibilizer were prepared using a Brabender Haake Rheocord at 2608C and 32 rpm. Maleic anhydride rafted styrene-ethylene/butylene-styrene (SEBS-g-MAH) and maleic anhydride grafted ethylene¿ propylene diene (EPDM-g-MAH) were chosen as compatibilizers and their proportion was set to 5, 10, and 15 wt%, respectively. The thermal properties and crystallization behavior were determined by differential scanning calorimetry (DSC) and wide angle X-ray scattering (WAXS). Micromechanical properties were also investigated using a Vickers microindentation tester. The DSC analysis indicates that the melting temperature of iPP in the all the blends, compatibilized and uncompatibilized ones, remains constant and is almost the same as those of the pure component. On the other hand, it is shown that the degree of crystallinity of iPP in the blends calculated by DSC and WAXS is dependent of the composition of the polymeric mixture. However the hardness (H) decreases with increasing PC content until the composition of iPP/PC (75/25) is reached, whereas for larger PC content values, H increases. The same trend was obtained with the addition of both compatibilizers. VC 2016 Society of Plastics Engineers, The authors are grateful for the financial support of the MINECO, Spain (Projects MAT2013 -47898-C2-1-R and MAT2013-47972-C2-1-P). A. H. greatly thanks the University of Borj Bou Arreridj for covering his expenses during his stay in Madrid., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unprecedented dependence of stiffness parameters and crystallinity on comonomer content in rapidly cooled propylene-co-1-pentene copolymers

  • García-Peñas, A.
  • Gómez-Elvira González, José Manuel
  • Lorenzo, Vicente
  • Pérez, Ernesto
  • Cerrada, María L.
A thorough evaluation of the mechanical behavior exhibited by fast crystallized propylene-1-pentene copolymers synthesized in a broad range of 1-pentene compositions is here described. Different mechanical magnitudes derived from loading, creep and unloading processes in depth sensing indentation measurements are correlated to structural features. Several ordered forms are able to be developed at the composition interval analyzed in these propylene-1-pentene copolymers applying a fast cooling processing. Moreover, either a single polymorph or distinct ratios of two crystalline lattices can be obtained, depending on comonomer content. Crystallinity as well as the type of existing crystallites play a critical role in the value of those mechanical magnitudes. An atypical and unprecedented dependence of either stiffness or crystallinity on 1-pentene content is observed in these copolymers, associated with their capability of crystallizing in the trigonal form., The financial support from projects MAT2013-47972-C2-1-P and MAT2013-47972-C2-2-P (MINECO) and from project MAT2016-79869-C2-1-P (AEI/FEDER, UE) is greatly acknowledged. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of polymorphism and the new trigonal modification on the mechanical response of isotactic poly(propylene-co-1-pentene-co-1-hexene) terpolymers

  • García-Peñas, A.
  • Gómez-Elvira González, José Manuel
  • Lorenzo, Vicente
  • Pérez, Ernesto
  • Cerrada, María L.
The mechanical response and crystalline structure have been analyzed in several propylene-co-1-pentene-co-1-hexene terpolymers. Different polymorphs are developed in these terpolymers depending on global comonomer content, 1-pentene:1-hexene ratio and thermal history. The trigonal δ crystal modification is observed in addition to monoclinic and orthorhombic crystallites and mesomorphic entities. For the terpolymers with higher comonomers contents, the mesophase and even the totally amorphous samples can be readily obtained at easily accessible cooling rates. Intensity and location of relaxation processes, values for storage and indentation modulus and hardness as well are found to be related to the type of crystallites and to the crystallinity. The variation of crystallinity upon the comonomer content is rather unusual when trigonal lattice is able to be developed if compared with that exhibited by other copolymers/terpolymers based on propylene. Because of the important effect of this variable on mechanical response and mobility within amorphous regions, relationships found in other mechanical parameters and in the relaxation associated with glass transition (location and intensity) are also uncommon. The presence of trigonal polymorph exerts a key role in those atypical dependences., The financial support from projects MAT2013-47972-C2-1-P and MAT2013-47972-C2-2-P (MINECO) and from project MAT2016-79869-C2-1-P (AEI/FEDER, UE) is greatly acknowledged. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Mesoporous SBA-15 Silica on the Thermal Stability of isotactic Polypropylene based Nanocomposites prepared by Melt Extrusion

  • Barranco-García, Rosa
  • Cerrada, María L.
  • Ressia, Jorge
  • Vallés, Enrique M.
  • García-Peñas, Alberto
  • Pérez, Ernesto
  • Gómez-Elvira González, José Manuel
The influence of mesoporous SBA-15 on the thermal stability of nanocomposites with isotactic polypropylene has been evaluated in detail, both under inert and air conditions, by performing dynamic weight loss measurements and by tracking the evolution of degradation species in materials prepared by melt extrusion. A superior thermal stability has been found in the composites, both under nitrogen and air, compared with that observed in the pristine PP. An almost identical effect has been found under those two atmospheres, in spite that the mechanisms involved in both of them are completely different. The rheological characteristics of these materials turn out the driving aspect in the observed thermal behaviour, prevailing on other specific detrimental parameters, The financial support from project MAT2016-79869-C2-1-P (AEI/FEDER, UE) is greatly acknowledged. Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. EMV and JR also express their gratitude to the Consejo Nacional de Investigaciones Científicas y Técnicas de la República Argentina (CONICET) and Universidad Nacional del Sur (UNS, Argentina) for supporting this study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Confinement of iPP crystallites within mesoporous SBA-15 channels in extruded iPP-SBA-15 nanocomposites studied by Small Angle X-ray scattering

  • Barranco-García, Rosa
  • López-Majada, Juan M.
  • Martínez, Juan C.
  • Gómez-Elvira González, José Manuel
  • Pérez, Ernesto
  • Cerrada, María L.
The main objective of this research is the study of different nanocomposites based on isotactic polypropylene (iPP) and mesoporous SBA-15 silica prepared by melt extrusion, analyzing the possible effect of this filler on the polymorphic behavior of iPP and the eventual observation of confinement effects. Thus, simultaneous Small Angle X-ray Scattering/Wide Angle X-ray Diffraction (SAXS/WAXD) synchrotron experiments at variable temperature have been performed on several iPP nanocomposites with different contents of SBA-15 mesoporous particles. Real-time variable-temperature SAXS measurements turned out a very useful tool to analyze the confinement of iPP crystallites within SBA-15 channels, and also to determine the most probable long spacing of chains located outside the SBA-15 nanospaces. Importance of these structural features is assessed by changes in the mechanical response of the final materials, finding that the presence of mesoporous particles leads to a reinforcing effect and contribute to improve the final dimensional stability, The financial support from project MAT2016-79869-C2-1-P (AEI/ FEDER, UE) is greatly acknowledged. Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received to perform these measurements. Authors thank to Prof. V. Lorenzo his help in the indentation measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid materials obtained by in situ polymerization based on polypropylene and mesoporous SBA-15 silica particles: Catalytic aspects, crystalline details and mechanical behavior

  • Barranco-García, Rosa
  • Ferreira, A. E.
  • Ribeiro, M. R.
  • Lorenzo, V.
  • García-Peñas, Alberto
  • García-Peñas, Alberto
  • Gómez-Elvira González, José Manuel
  • Pérez, Ernesto
  • Cerrada, María L.
Nanocomposites based on polypropylene have been prepared by in situ polymerization of propene in presence of mesoporous SBA-15 silica. Synthetic reactions were carried out with a zirconocene catalyst under either homogenous or supported conditions, the SBA-15 particles being used as carriers, and testing the immobilization of the catalytic system by several approaches. The existence of polypropylene able to crystallize within the mesoporous channels in the resulting materials is initially figured out from the appearance of a small endothermic process on heating calorimetric experiments, located at around 100 °C. The presence of polypropylene crystallites confined within the SBA-15 mesostructure is thereafter confirmed by SAXS measurements through the intensity variation of the SBA-15 first order reflection, this change being dependent on composition. Accordingly, polypropylene chains can grow up either outside or inside the SBA-15 channels during polymerization and the mesoporous particles maintain their ordered hexagonal arrangement. Mechanical response, as deduced from indentation measurements, improves with SBA-15 incorporation (without varying the final processing temperature). Thus, stiffness increases and deformability is reduced in the nanocomposites as the SBA-15 content rises. Simultaneously, polypropylene amount within channels is enlarged. Amount of SBA-15 is, then, the most important variable., The financial support from project MAT2016-79869-C2-1-P (AEI/ FEDER, UE) is greatly acknowledged. Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Confinement of iPP chains in the interior of SBA-15 mesostructure ascertained by gas transport properties in iPP-SBA-15 nanocomposites prepared by extrusion

  • Barranco-García, Rosa
  • López-Majada, Juan M.
  • Lorenzo, Vicente
  • Gómez-Elvira González, José Manuel
  • Cerrada, María L.
Different nanocomposites based on isotactic polypropylene (iPP) and mesoporous SBA-15 silica have been prepared by melt extrusion as an attempt of incorporating iPP within the nanometric SBA-15 pores by the action of shear forces during processing. The observed inclusion of iPP chains in the SBA-15 leads to a change in the gas transport properties of the resultant iPP/SBA-15 membranes together with the improvement of their ultimate mechanical performance. Existence of confinement effects is observed, consequently, by the exhibited transport properties and is confirmed through real-time variable-temperature Small Angle X-ray Scattering (SAXS) experiments with synchrotron radiation. The former indicates that the mesostructure of silica is full, i.e., these particles essentially act as fillers. The latest has been proved by the presence of a discontinuity in the intensity of the (100) SBA-15 diffraction, which turn SAXS measurements at variable temperature into a valuable means to corroborate the development of iPP crystallites within SBA-15 channels. Moreover, SAXS profiles provide information about the most probable long spacing of chains located outside the SBA-15 nanospaces. On the other hand, changes in the β viscoelastic relaxation have been correlated to the influence of SBA-15 in the iPP amorphous regions. All the structural features have been crucial for the understanding the mechanical response shown by these nanocomposites. Mesoporous particles exert a reinforcing role and reduce the deformation capacity in the ultimate materials as their content is increased., This work was supported by the Agencia Estatal de Investigación (AEI, Spain) together with the European Regional Development Fund (FEDER, UE) [MAT2016-79869-C2-1-P]. Ms. R Barranco-García also thanks her pre-doctoral funding [BES-2014–070972] associated with the Ministerio de Economía y Competitividad (MINECO, Spain) [MAT2013-47972-C2-1-P] project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received to perform these measurements., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A new insight into the comonomer effect through NMR analysis in metallocene catalysed propene–co–1-nonene copolymers

  • Wu, Qiong
  • García-Peñas, A.
  • Barranco-García, Rosa
  • Cerrada, María L.
  • Benavente, Rosario
  • Pérez, Ernesto
  • Gómez-Elvira González, José Manuel
© The Author(s)., The “comonomer effect” is an intriguing kinetic phenomenon in olefin copolymerization that still remains without a detailed explanation. It typically relates to the rate of enhancement undergone in ethylene and propene catalytic polymerization just by adding small fractions of an alpha-olefin. The difficulty lies in the fact that changes caused by the presence of the comonomer in reaction parameters are so conspicuous that it is really difficult to pin down which of them is the primary cause and which ones are side factors with marginal contribution to the phenomenon. Recent investigations point to the modification of the catalyst active sites as the main driving factor. In this work, the comonomer effect in the metallocene copolymerization of propene and 1-nonene is analysed and correlated to the comonomer role in the termination of the chain-growing process. The associated termination mechanisms involved furnish most of chain-free active sites, in which the selective interaction of the comonomer was proposed to trigger the insertion of monomers. A thorough characterisation of chain-end groups by means of the 1H NMR technique allows for detailing of specific transfer processes, ascribed to comonomer insertions, as well as evidencing the influence of the growing chain’s microstructure over the different termination processes available., Q.W. thanks the HKUST and the CSIC for the Master student funding (HKUST2017-25). R.B.-G. also thanks the Ministerio de Economía y Competitividad (MINECO, Spain) for the predoctoral funding (BES-2014-070972)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chain Features and Their Influence on the Thermal Stability of Poly(propylene-co-1-nonene) Copolymers

  • Qiong, W.
  • García-Peñas, Alberto
  • Barranco-García, Rosa
  • Cerrada, María L.
  • Benavente, Rosario
  • Pérez, Ernesto
  • Gómez-Elvira González, José Manuel
The thermal stability of several isotactic polypropylenes and propylene-co-1-nonene copolymers is assessed under nitrogen by means of thermogravimetric analysis (TGA). The samples involve wide ranges of molecular weight, isotactic average length, and 1-nonene content, in order to perform a comprehensive analysis of the effect that chain features exert on the apparent activation energy (E), in the initial stages of the molten state degradation. The degradation process correlates with chain mobility and, accordingly, with chain features that are linked to. Thus, microstructure and chain size are found to play a key role. In fact, isotactic average length of propylene sequences and molecular weight are driving factors in the E required for main chain thermal scission., The financial support from project MAT2016-79869-C2-1-P (AEI/FEDER, UE) is greatly acknowledged. Ms. D. Qiong thanks her training funding (Hong Kong University of Science and Technology. Master Student at CSIC, HKUST2017-25) and Ms. R. Barranco-García thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of iPP molecular weight on its confinement within mesoporous SBA-15 silica in extruded iPP-SBA-15 nanocomposites

  • Barranco-García, Rosa
  • Gómez-Elvira González, José Manuel
  • Ressia, Jorge A.
  • Quinzani, Lidia
  • Vallés, Enrique M.
  • Pérez, Ernesto
  • Cerrada, María L.
Different nanocomposites based on two isotactic polypropylenes (iPP) and mesoporous SBA-15 silica have been attained by melt extrusion as an attempt to understand the influence of average molecular weight in the rheological behavior, morphological and crystalline features and in the final properties (thermal stability and mechanical response) as well as in the capability of incorporating iPP chains within the nanometric SBA-15 pores. Closeness to rheological percolation and a significant increase of viscosity are observed as SBA-15 content is raised, this effect being more evident for the materials prepared from the iPP with the lowest molecular weight. These composites also shift their maximum degradation to lower values under inert atmosphere but keep rather unchanged decomposition behavior in oxidant conditions. No considerable changes are found with molecular weight in their morphological characteristics, nor in the type of iPP polymorph developed. The confinement of iPP chains in the SBA-15 channels, implied by a small endotherm in the DSC melting curves, is definitely ascertained by real-time variable-temperature Small Angle X-ray Scattering measurements with synchrotron radiation, suggesting, additionally, that somewhat thicker crystallites are developed within the mesostructure in the materials prepared from the iPP with inferior molecular weight. Moreover, the SBA-15 mesoporous particles exert a reinforcing role in all cases and reduce the deformation capacity of the ultimate materials as their content is increased., This work was supported by the Agencia Estatal de Investigación (AEI, Spain) together with the European Regional Development Fund (FEDER, UE) (MAT2016-79869-C2-1-P project). Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received to perform these measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A New Insight into the Comonomer Effect through NMR Analysis in Metallocene Catalysed Propene-co-1-Nonene Copolymers

  • Wu, Qiong
  • García-Peñas, Alberto
  • Barranco-García, Rosa
  • Cerrada, María L.
  • Benavente, Rosario
  • Pérez, Ernesto
  • Gómez-Elvira González, José Manuel
The ¿comonomer effect¿ is an intriguing kinetic phenomenon in olefin copolymerization that still remains without a detailed explanation. It typically relates to the rate of enhancement undergone in ethylene and propene catalytic polymerization just by adding small fractions of an alpha-olefin. The difficulty lies in the fact that changes caused by the presence of the comonomer in reaction parameters are so conspicuous that it is really difficult to pin down which of them is the primary cause and which ones are side factors with marginal contribution to the phenomenon. Recent investigations point to the modification of the catalyst active sites as the main driving factor. In this work, the comonomer effect in the metallocene copolymerization of propene and 1-nonene is analysed and correlated to the comonomer role in the termination of the chain-growing process. The associated termination mechanisms involved furnish most of chain-free active sites, in which the selective interaction of the comonomer was proposed to trigger the insertion of monomers. A thorough characterisation of chain-end groups by means of the 1H NMR technique allows for detailing of specific transfer processes, ascribed to comonomer insertions, as well as evidencing the influence of the growing chain¿s microstructure over the different termination processes available., This research was funded by the Agencia Estatal de Investigacion (AEI, Spain), together with the European Regional Development Fund (FEDER, UE), grant number MAT2016-79869-C2-1-P. Human resources funding was provided by the Hong Kong University of Science and Technology, in the frame of the CSIC-HKUST cooperation, grant number HKUST2017-25, and by the Ministerio de Economía y Competitividad (MINECO, Spain), grant number BES-2014-070972
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of iPP molecular weight on its confinement within mesoporous SBA-15 silica in extruded iPP−SBA-15 nanocomposites

  • Barranco-García, Rosa
  • Gómez-Elvira González, José Manuel
  • Ressia, Jorge A.
  • Quinzani, Lidia
  • Vallés, Enrique M.
  • Pérez, Enrique
  • Cerrada, María L.
Different nanocomposites based on two isotactic polypropylenes (iPP) and mesoporous SBA-15 silica have been attained by melt extrusion as an attempt to understand the influence of average molecular weight in the rheological behavior, morphological and crystalline features and in the final properties (thermal stability and mechanical response) as well as in the capability of incorporating iPP chains within the nanometric SBA-15 pores. Closeness to rheological percolation and a significant increase of viscosity are observed as SBA-15 content is raised, this effect being more evident for the materials prepared from the iPP with the lowest molecular weight. These composites also shift their maximum degradation to lower values under inert atmosphere but keep rather unchanged decomposition behavior in oxidant conditions. No considerable changes are found with molecular weight in their morphological characteristics, nor in the type of iPP polymorph developed. The confinement of iPP chains in the SBA-15 channels, implied by a small endotherm in the DSC melting curves, is definitely ascertained by real-time variable-temperature Small Angle X-ray Scattering measurements with synchrotron radiation, suggesting, additionally, that somewhat thicker crystallites are developed within the mesostructure in the materials prepared from the iPP with inferior molecular weight. Moreover, the SBA-15 mesoporous particles exert a reinforcing role in all cases and reduce the deformation capacity of the ultimate materials as their content is increased., This work was supported by the Agencia Estatal de Investigaci�on (AEI, Spain) together with the European Regional Development Fund (FEDER, UE) (MAT2016-79869-C2-1-P project). Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synchrotron and Raman Study of the Rotator Phases and Polymorphism in Tricosane Paraffin

  • Blázquez-Blázquez, Enrique
  • Barranco-García, Rosa
  • Cerrada, María L.
  • Martínez, Juan C.
  • Pérez, Ernesto
A detailed study of the phase behavior of n-paraffin C23H48 has been performed by means of real-time variable-temperature experiments with synchrotron radiation. Two detectors were employed for simultaneous analysis of the small-angle (SAXS) and wide-angle X-ray-scattering (WAXS) regions. This paraffin presents a very interesting phase behavior, involving two crystal polymorphs, three rotator phases and the liquid state. The Ostwald rule of stages is invoked to find similarities of the rotator phases with the eventual transient mesomorphic structure in the multistage model of polymer crystallization. That study is complemented by variable-temperature Raman experiments covering frequencies down to 150 cm−1. It was found that the low-frequency region is the most informative regarding the phase transitions, and specifically the intensity of the first overtone. From these analyses, several parameters are evaluated as function of temperature., This research was funded by the Agencia Estatal de Investigación (AEI, Spain) and by the European Regional Development Fund (FEDER, UE) through the project with grant number MAT2016-79869-C2-1-P. R.B.-G. pre-doctoral contract (BES-2014-070972) was funded by MINECO through the project with grant number MAT2013-47972-C2-1-P. Synchrotron experiments were funded by ALBA Synchrotron Light Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Variation of ultimate properties in extruded iPP-mesoporous silica nanocomposites by effect of iPP confinement within the mesostructures

  • Barranco-García, Rosa
  • Gómez-Elvira González, José Manuel
  • Ressia, Jorge A.
  • Quinzani, Lidia
  • Vallés, Enrique M.
  • Pérez, Ernesto
  • Cerrada, María L.
Nanocomposites based on isotactic polypropylene (iPP) and mesoporous silica particles of either MCM-41 or SBA-15 were prepared by melt extrusion. The effect of the silica incorporated into an iPP matrix was firstly detected in the degradation behavior and in the rheological response of the resultant composites. Both were ascribed, in principle, to variations in the inclusion of iPP chains within these two mesostructures, with well different pore size. DSC experiments did not provide information on the existence of confinement in the iPP-MCM-41 materials, whereas a small endotherm, located at about 100 °C and attributed to the melting of confined crystallites, is clearly observed in the iPP-SBA-15 composites. Real-time variable-temperature Small Angle X-ray Scattering (SAXS) experiments with synchrotron radiation turned out to be crucial to finding the presence of iPP within MCM-41 pores. From these measurements, precise information was also deduced on the influence of the MCM-41 on iPP long spacing since overlapping does not occur between most probable iPP long spacing peak with the characteristic diffractions from the MCM-41 hexagonal nanostructure in comparison with existing superposition in SBA-15-based materials., This research was funded by the Agencia Estatal de Investigación (AEI, Spain) and by the European Regional Development Fund (FEDER, UE) through the project with grant number MAT2016-79869-C2-1-P. R. Barranco-García pre-doctoral contract (BES-2014-070972) was funded by MINECO through the project with grant number MAT2013-47972-C2-1-P. Synchrotron experiments were funded by ALBA Synchrotron Light Facility