Skip to main content

FUNCIONALIZACION DE SILICES MESOPOROSAS PARA LA OPTIMIZACION DE LAS PRESTACIONES FINALES EN (NANO)COMPUESTOS POLIMERICOS

MAT2016-79869-C2-1-P

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unprecedented dependence of stiffness parameters and crystallinity on comonomer content in rapidly cooled propylene-co-1-pentene copolymers

  • García-Peñas, A.
  • Gómez-Elvira González, José Manuel
  • Lorenzo, Vicente
  • Pérez, Ernesto
  • Cerrada, María L.
A thorough evaluation of the mechanical behavior exhibited by fast crystallized propylene-1-pentene copolymers synthesized in a broad range of 1-pentene compositions is here described. Different mechanical magnitudes derived from loading, creep and unloading processes in depth sensing indentation measurements are correlated to structural features. Several ordered forms are able to be developed at the composition interval analyzed in these propylene-1-pentene copolymers applying a fast cooling processing. Moreover, either a single polymorph or distinct ratios of two crystalline lattices can be obtained, depending on comonomer content. Crystallinity as well as the type of existing crystallites play a critical role in the value of those mechanical magnitudes. An atypical and unprecedented dependence of either stiffness or crystallinity on 1-pentene content is observed in these copolymers, associated with their capability of crystallizing in the trigonal form., The financial support from projects MAT2013-47972-C2-1-P and MAT2013-47972-C2-2-P (MINECO) and from project MAT2016-79869-C2-1-P (AEI/FEDER, UE) is greatly acknowledged. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of polymorphism and the new trigonal modification on the mechanical response of isotactic poly(propylene-co-1-pentene-co-1-hexene) terpolymers

  • García-Peñas, A.
  • Gómez-Elvira González, José Manuel
  • Lorenzo, Vicente
  • Pérez, Ernesto
  • Cerrada, María L.
The mechanical response and crystalline structure have been analyzed in several propylene-co-1-pentene-co-1-hexene terpolymers. Different polymorphs are developed in these terpolymers depending on global comonomer content, 1-pentene:1-hexene ratio and thermal history. The trigonal δ crystal modification is observed in addition to monoclinic and orthorhombic crystallites and mesomorphic entities. For the terpolymers with higher comonomers contents, the mesophase and even the totally amorphous samples can be readily obtained at easily accessible cooling rates. Intensity and location of relaxation processes, values for storage and indentation modulus and hardness as well are found to be related to the type of crystallites and to the crystallinity. The variation of crystallinity upon the comonomer content is rather unusual when trigonal lattice is able to be developed if compared with that exhibited by other copolymers/terpolymers based on propylene. Because of the important effect of this variable on mechanical response and mobility within amorphous regions, relationships found in other mechanical parameters and in the relaxation associated with glass transition (location and intensity) are also uncommon. The presence of trigonal polymorph exerts a key role in those atypical dependences., The financial support from projects MAT2013-47972-C2-1-P and MAT2013-47972-C2-2-P (MINECO) and from project MAT2016-79869-C2-1-P (AEI/FEDER, UE) is greatly acknowledged. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of Mesoporous SBA-15 Silica on the Thermal Stability of isotactic Polypropylene based Nanocomposites prepared by Melt Extrusion

  • Barranco-García, Rosa
  • Cerrada, María L.
  • Ressia, Jorge
  • Vallés, Enrique M.
  • García-Peñas, Alberto
  • Pérez, Ernesto
  • Gómez-Elvira González, José Manuel
The influence of mesoporous SBA-15 on the thermal stability of nanocomposites with isotactic polypropylene has been evaluated in detail, both under inert and air conditions, by performing dynamic weight loss measurements and by tracking the evolution of degradation species in materials prepared by melt extrusion. A superior thermal stability has been found in the composites, both under nitrogen and air, compared with that observed in the pristine PP. An almost identical effect has been found under those two atmospheres, in spite that the mechanisms involved in both of them are completely different. The rheological characteristics of these materials turn out the driving aspect in the observed thermal behaviour, prevailing on other specific detrimental parameters, The financial support from project MAT2016-79869-C2-1-P (AEI/FEDER, UE) is greatly acknowledged. Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. EMV and JR also express their gratitude to the Consejo Nacional de Investigaciones Científicas y Técnicas de la República Argentina (CONICET) and Universidad Nacional del Sur (UNS, Argentina) for supporting this study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Confinement of iPP crystallites within mesoporous SBA-15 channels in extruded iPP-SBA-15 nanocomposites studied by Small Angle X-ray scattering

  • Barranco-García, Rosa
  • López-Majada, Juan M.
  • Martínez, Juan C.
  • Gómez-Elvira González, José Manuel
  • Pérez, Ernesto
  • Cerrada, María L.
The main objective of this research is the study of different nanocomposites based on isotactic polypropylene (iPP) and mesoporous SBA-15 silica prepared by melt extrusion, analyzing the possible effect of this filler on the polymorphic behavior of iPP and the eventual observation of confinement effects. Thus, simultaneous Small Angle X-ray Scattering/Wide Angle X-ray Diffraction (SAXS/WAXD) synchrotron experiments at variable temperature have been performed on several iPP nanocomposites with different contents of SBA-15 mesoporous particles. Real-time variable-temperature SAXS measurements turned out a very useful tool to analyze the confinement of iPP crystallites within SBA-15 channels, and also to determine the most probable long spacing of chains located outside the SBA-15 nanospaces. Importance of these structural features is assessed by changes in the mechanical response of the final materials, finding that the presence of mesoporous particles leads to a reinforcing effect and contribute to improve the final dimensional stability, The financial support from project MAT2016-79869-C2-1-P (AEI/ FEDER, UE) is greatly acknowledged. Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received to perform these measurements. Authors thank to Prof. V. Lorenzo his help in the indentation measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid materials obtained by in situ polymerization based on polypropylene and mesoporous SBA-15 silica particles: Catalytic aspects, crystalline details and mechanical behavior

  • Barranco-García, Rosa
  • Ferreira, A. E.
  • Ribeiro, M. R.
  • Lorenzo, V.
  • García-Peñas, Alberto
  • García-Peñas, Alberto
  • Gómez-Elvira González, José Manuel
  • Pérez, Ernesto
  • Cerrada, María L.
Nanocomposites based on polypropylene have been prepared by in situ polymerization of propene in presence of mesoporous SBA-15 silica. Synthetic reactions were carried out with a zirconocene catalyst under either homogenous or supported conditions, the SBA-15 particles being used as carriers, and testing the immobilization of the catalytic system by several approaches. The existence of polypropylene able to crystallize within the mesoporous channels in the resulting materials is initially figured out from the appearance of a small endothermic process on heating calorimetric experiments, located at around 100 °C. The presence of polypropylene crystallites confined within the SBA-15 mesostructure is thereafter confirmed by SAXS measurements through the intensity variation of the SBA-15 first order reflection, this change being dependent on composition. Accordingly, polypropylene chains can grow up either outside or inside the SBA-15 channels during polymerization and the mesoporous particles maintain their ordered hexagonal arrangement. Mechanical response, as deduced from indentation measurements, improves with SBA-15 incorporation (without varying the final processing temperature). Thus, stiffness increases and deformability is reduced in the nanocomposites as the SBA-15 content rises. Simultaneously, polypropylene amount within channels is enlarged. Amount of SBA-15 is, then, the most important variable., The financial support from project MAT2016-79869-C2-1-P (AEI/ FEDER, UE) is greatly acknowledged. Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Extraordinary mechanical performance in disentangled UHMWPE films processed by compression molding

  • Ferreira, A. E.
  • Ribeiro, M. R.
  • Cramail, H.
  • Lourenço, J. P.
  • Lorenzo, Vicente
  • Pérez, Ernesto
  • Cerrada, María L.
An approach to obtain disentangled ultra-high molecular weight polyethylene (UHMWPE) films is proposed using a common compression molding. For that, disentangled UHMWPE nascent powders from reactor are processed at temperatures lower than the main melting peak and at high pressure. Then, disentangled UHMWPE films obtained from homogeneous polymerization powders and from those that incorporate SBA-15 mesoporous silica can be easily achieved by this simple methodology. These disentangled UHMWPE based materials show very high crystallinity and, consequently, outstanding elastic modulus and hardness, both further increasing by presence of mesoporous SBA-15 in the hybrids., Financial support from projects SFRH/BD/72761/2010 and UID/ QUI/00100/2013 (Fundação para a Ciência e Tecnologia, Portugal) and MAT2016-79869-C2-1-P (AEI, Spain / FEDER, UE) is greatly acknowledged, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Poly(propylene-co-1-pentene-co-1-heptene) terpolymers: Mechanical and rheological behavior

  • García-Peñas, Alberto
  • Gómez-Elvira González, José Manuel
  • Lorenzo, Vicente
  • Wilhelm, M.
  • Pérez, Ernesto
  • Cerrada, María L.
This work describes the important effects of microstructural features on crystalline structure, mechanical behavior and molten state response for poly (propylene-co-1-pentene-co-1-heptene) terpolymers. The study was carried out in a wide range of compositions, varying the 1-pentene/1-heptene ratio and the thermal history applied. Molecular features, as propylene sequences and compositional triads, allow predicting the material behavior. Moreover, rheological response has demonstrated the influence of molecular weight, comonomer content and short-chain branches on the properties. The flow activation energy can justify the importance of the material density over the whole spectrum of properties., The financial support from project MAT2016-79869-C2-1-P (AEI/ FEDER, UE) is greatly acknowledged. Finally, we thank Ms. Mürüvvet Begüm Özen for her valuable experimental advices and Dr. Mahdi Abbasi for his helpful discussion, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Confinement of iPP chains in the interior of SBA-15 mesostructure ascertained by gas transport properties in iPP-SBA-15 nanocomposites prepared by extrusion

  • Barranco-García, Rosa
  • López-Majada, Juan M.
  • Lorenzo, Vicente
  • Gómez-Elvira González, José Manuel
  • Cerrada, María L.
Different nanocomposites based on isotactic polypropylene (iPP) and mesoporous SBA-15 silica have been prepared by melt extrusion as an attempt of incorporating iPP within the nanometric SBA-15 pores by the action of shear forces during processing. The observed inclusion of iPP chains in the SBA-15 leads to a change in the gas transport properties of the resultant iPP/SBA-15 membranes together with the improvement of their ultimate mechanical performance. Existence of confinement effects is observed, consequently, by the exhibited transport properties and is confirmed through real-time variable-temperature Small Angle X-ray Scattering (SAXS) experiments with synchrotron radiation. The former indicates that the mesostructure of silica is full, i.e., these particles essentially act as fillers. The latest has been proved by the presence of a discontinuity in the intensity of the (100) SBA-15 diffraction, which turn SAXS measurements at variable temperature into a valuable means to corroborate the development of iPP crystallites within SBA-15 channels. Moreover, SAXS profiles provide information about the most probable long spacing of chains located outside the SBA-15 nanospaces. On the other hand, changes in the β viscoelastic relaxation have been correlated to the influence of SBA-15 in the iPP amorphous regions. All the structural features have been crucial for the understanding the mechanical response shown by these nanocomposites. Mesoporous particles exert a reinforcing role and reduce the deformation capacity in the ultimate materials as their content is increased., This work was supported by the Agencia Estatal de Investigación (AEI, Spain) together with the European Regional Development Fund (FEDER, UE) [MAT2016-79869-C2-1-P]. Ms. R Barranco-García also thanks her pre-doctoral funding [BES-2014–070972] associated with the Ministerio de Economía y Competitividad (MINECO, Spain) [MAT2013-47972-C2-1-P] project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received to perform these measurements., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation of nanocomposites based on styrene/(p-methylstyrene) and SiO2 nanoparticles, through a metallocene–MAO initiating system

  • Zapata, P. A.
  • Zamora, P.
  • Canales, D. A.
  • Quijada, R.
  • Benavente, Rosario
  • Rabagliati, Franco M.
The preparation of nanocomposites, including styrene, tertbutylstyrene, and SiO nanoparticles, in toluene solution was attempted by in situ polymerization using a cyclopentadienyltitaniumtrichloride–methylaluminoxane, CpTiCl–MAO, initiator system. SiO nanospheres (ca. 20 nm in diameter) were synthesized by the sol–gel method. The nanoparticles’ surface was modified with hexadecyltrimethoxysilane (Mod-SiONps) in order to improve the interactions with the polymer. The polymerization activity increased as the proportion of p-methyl styrene was increased in the initial feed. With respect to the effect of the incorporation of nanoparticles in the reactions, the catalytic activity increased slightly in the presence of 5 wt% of nanospheres compared to neat copolymerization without any nanoparticles. Our studies achieved a convenient route through in situ polymerization, avoiding further treatment of the nanocomposite. The thermal stability of the PS increased with nanoparticle incorporation. The effect of SiO-Npts on the catalyst’s activity and on the thermal properties of the resulting nanocomposites was determined., Financial support from DICYT Project, código 051641ZR_DAS, Vicerrectoría de Investigación, Desarrollo e Innovación, to Dr. P.A. Zapata, and from the Universidad de Santiago de Chile, and partial financial support by the Fondo Nacional de Desarrollo Científico y Tecnológico (FONDECYT) to Dr. F.M, Rabagliati under Project 108.5061, are gratefully acknowledged and financial support from MINECO Project MAT2016-79869_C2-1-P (AEI/FEDER, UE) to R. Benavente. Thanks are due to colleagues S. Muñoz-Guerra and A., Martínez de Ilarduya from Departament d’Enginyeria Química, ETSEIB, Universitat Politécnica de Catalunya, UPC, Barcelona, Spain, for performing NMR analysis of obtained polymers, P(S-co-p-MeS)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electromagnetic interference shielding response and rheological behavior of lightweight nanocomposites based on isotactic polypropylene and Al nanoparticles

  • Blázquez-Blázquez, Enrique
  • Arranz-Andrés, Javier
  • Ressia, Jorge
  • Vallés, Enrique M.
  • Marín, Pilar
  • Aragón, Ana M.
  • Pérez, Ernesto
  • Cerrada, María L.
Nanocomposites based on isotactic polypropylene (iPP) and different content of Al nanoparticles have been prepared in order to gain knowledge of their electromagnetic interference (EMI) shielding capability. This potential has been analyzed from attenuation upon reflection measurements at microwave frequency range. Moreover, shielding characteristics have been checked by Attenuated Total Reflectance (ATR) and correlated to the ones achieved by X-ray diffraction with synchrotron radiation. Very promising results have been obtained, with an excellent balance between shielding efficiency and sample weight. Hence, these materials are potentially good alternatives to replace metals for this application, avoiding electromagnetic environmental pollution. The effect of incorporation of Al nanoparticles on the iPP processing properties has been additionally evaluated by a rheological study at a very broad frequency range., The financial support of AEI , Spain /FEDER, UE (project MAT2016- 79869-C2-1-P) is acknowledged. The synchrotron work leading to these results received funding from the European Community's Seventh Framework Programme (FP7/2007–2013) under grant agreement n° 312284., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In vitro degradation of biodegradable polylactic acid/Mg composites: Influence of nature and crystalline degree of the polymeric matrix

  • Cifuentes, Sandra C.
  • Lieblich, Marcela
  • Saldaña, Laura
  • González-Carrasco, José Luis
  • Benavente, Rosario
A deeper knowledge on the degradation pattern of a biodegradable material is required before considering it for a specific application as a bioabsorbable implant. In the last few years, composites formed by polylactic-acid reinforced with Mg-based particles have been proposed for biodegradable implants. The aim of the present work is to study the effect of the type and crystalline degree of the polymeric matrix on in vitro degradation kinetics of PLA/Mg composites. The effect of the nature of the matrix has been studied by comparing a composite with a poly-L-lactic (PLLA) matrix with another with a poly-L,D-lactic (PLDA) matrix. The influence of the crystalline degree has been studied by comparing a near amorphous with a high crystalline composite. The degradation behaviour has been determined through a joint analysis of the microstructure, the changes in mass and water intake, the pH evolution in buffered and non-buffered media, and the amount of H released up to 28 days of immersion. The viability of human mesenchymal stem cells (MSCs) on the composites was also evaluated. Results show that a PLDA matrix is more effective lowering the degradation rate of Mg particles than PLLA. The crystalline degree plays a major role in PLA/Mg composites degradation. The composite with the near amorphous matrix exhibited the lowest degradation rate and the highest cell viability. Whereas, cell viability decreases markedly on the high-crystalline composites, which is likely related to the accelerated release of degradation products. These data highlight the importance of matrix crystallinity on the degradation kinetics and cytocompatibility of PLA/Mg composites., The authors thank funding from MAT2015-63974-C4-1-R , MAT2016-79869-C2-1-P, PCIN-2017-036, S2013/MIT-2862 and PI15/00752 ( ISCIII -MINECO-AES) projects. LS is supported by a Miguel Servet contract from ISCIII-MINECO-AES-FEDER-FSE. SCC is supported by a Juan de la Cierva contract FJCI-2016-29004 ., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications

  • Ferrández-Montero, Ana
  • Lieblich, Marcela
  • González-Carrasco, José Luis
  • Benavente, Rosario
  • Lorenzo, V.
  • Detsch, R.
  • Boccaccini, A. R.
  • Ferrari, Begoña
During recent years, Mg reinforced polylactic acid (PLA) composites have emerged as potential biocompatible and bioabsorbable materials for biomedical applications. It has been shown that Mg particles added to a matrix based on a biodegradable polymer can address the lack of bioactivity and the low mechanical properties of the polymers and, furthermore, it can counteract the detrimental effects associated to the high degradation rate of Mg, as alkalinization and elevated H release. Additionally, the polymer can protect the Mg particles, by tailoring their degradation rate. Former processing of these composites performed by extrusion, compression and injection molding employed Mg contents up to 10 wt%. Higher amounts of Mg resulted in heterogeneous materials and thermally degraded matrices, with the corresponding higher degradation rate. In the present work, Mg reinforced PLA films with Mg content as high as 50 wt% were obtained without compromising the thermal stability of the polymer. Firstly, a successful dispersion of Mg microparticles was achieved by a breakthrough in processing introducing a colloidal step where organic additives were added to modify the Mg particle surface and promote a chemically stable suspension. The resulting colloidal suspension was then used as feedstock to obtain composite films by tape casting. The films show advantageous in vitro behaviour in terms of degradation, hydrogen release and oxygen permeability. In addition, the viability with fibroblast cells (MEF) opens a window of opportunity for these composite films as bioabsorbable material for tissue engineering and wound dressing applications. Statement of Significance: Magnesium materials have extraordinary biodegradable properties and bioactive behavior due to release of Mg ions, which offer a promising opportunity for their applicability as biomaterials for tissue regeneration. However, Mg is one of the most reactive metals with a high degradation rate. In contact with water produces H, associated with a risk of failure of the implant. One alternative to minimize this drawback is the use of Mg particles surrounded by a biodegradable biocompatible polymer such as polylactic acid (PLA) to obtain PLA/Mg composites. In this work we processed Mg reinforced PLA in the shape of films that would be suitable for tissue regeneration. In vitro behavior of PLA/Mg films demonstrated that Mg ions increase the fibroblast cells growth., Financial support of MINECO: MAT2015-63974-C4-1, MAT2016-79869-C2-1-P, MAT2016-79869-C2-1-P (AEI/FEDER, UE), Comunidad de Madrid: ADITIMAT: S2018/NMT-4411, and M-ERA.NET PCIN-2017-036 (MINECO, Spain)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chain Features and Their Influence on the Thermal Stability of Poly(propylene-co-1-nonene) Copolymers

  • Qiong, W.
  • García-Peñas, Alberto
  • Barranco-García, Rosa
  • Cerrada, María L.
  • Benavente, Rosario
  • Pérez, Ernesto
  • Gómez-Elvira González, José Manuel
The thermal stability of several isotactic polypropylenes and propylene-co-1-nonene copolymers is assessed under nitrogen by means of thermogravimetric analysis (TGA). The samples involve wide ranges of molecular weight, isotactic average length, and 1-nonene content, in order to perform a comprehensive analysis of the effect that chain features exert on the apparent activation energy (E), in the initial stages of the molten state degradation. The degradation process correlates with chain mobility and, accordingly, with chain features that are linked to. Thus, microstructure and chain size are found to play a key role. In fact, isotactic average length of propylene sequences and molecular weight are driving factors in the E required for main chain thermal scission., The financial support from project MAT2016-79869-C2-1-P (AEI/FEDER, UE) is greatly acknowledged. Ms. D. Qiong thanks her training funding (Hong Kong University of Science and Technology. Master Student at CSIC, HKUST2017-25) and Ms. R. Barranco-García thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of thermo-oxidation on loss of plasticizers, on crystalline features and on properties in a metallocene isotactic polypropylene

  • Blázquez-Blázquez, Enrique
  • Barranco-García, Rosa
  • Cerrada, María L.
  • Pérez, Ernesto
Incorporation of a low content of several plasticizers into a metallocene isotactic polypropylene (iPP) has been performed in order to learn about their stability and performance by the action of a thermo-oxidative degradation treatment at 95 °C for different times. Comparison with the behavior exhibited by the material with di(2-ethylhexyl) phthalate (DEHP) is established for a feasible replacement of its use for contributing to environmental and human health preservation. Dependence of these aggressive degrading conditions on plasticizer loss is analyzed as well as elucidation of degradation influence on the iPP crystalline characteristics. The results show that chemical changes associated with this degradation process hinder formation of the orthorhombic γ crystalline lattice and postpone the overall crystallization capability. Accordingly, the final features in the film surface and the mechanical response are significantly affected by degradation time. The TOTM plasticizer can be considered an excellent candidate for DEHP substitution., The financial support from project MAT2016-79869-C2-1-P (AEI/ FEDER, UE) is greatly acknowledged. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received to perform these measurements. Authors would like to thank to Dr. N. García her help in the measurements with the optical profilometer., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Crystalline characteristics and their influence in the mechanical performance in poly(ε-Caprolactone) / high density polyethylene blends

  • Blázquez-Blázquez, Enrique
  • Pérez, Ernesto
  • Lorenzo, Vicente
  • Cerrada, María L.
Blends of poly(ε-caprolactone) (PCL) and high-density polyethylene (HDPE) have been prepared at different compositions in order to assess the effect of HDPE on gas transport and mechanical behaviors of PCL. Previous to this evaluation, a complete morphological, structural, and thermal characterization were performed using techniques, including SEM, contact angle, FTIR, differential scanning calorimetry, and X-ray diffraction with synchrotron radiation at small and wide angles. Low HDPE incorporations allow interactions to be established at interfaces in the amorphous regions and the enhancement of the mechanical performance. Consequently, the addition of a small amount of HDPE (ranging from 5 to 10 wt%) appears to be appropriate in certain bio-applications where a higher mechanical behavior is required., This research was funded by the Agencia Estatal de Investigación (AEI, Spain) and by the European Regional Development Fund (FEDER, UE) through the project with grant number MAT2016-79869-C2-1-P. It was also funded by the Seventh Framework Programme (FP7/2007–2013) of the European Community for the synchrotron experiments (grant agreement n° 312284)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of iPP molecular weight on its confinement within mesoporous SBA-15 silica in extruded iPP-SBA-15 nanocomposites

  • Barranco-García, Rosa
  • Gómez-Elvira González, José Manuel
  • Ressia, Jorge A.
  • Quinzani, Lidia
  • Vallés, Enrique M.
  • Pérez, Ernesto
  • Cerrada, María L.
Different nanocomposites based on two isotactic polypropylenes (iPP) and mesoporous SBA-15 silica have been attained by melt extrusion as an attempt to understand the influence of average molecular weight in the rheological behavior, morphological and crystalline features and in the final properties (thermal stability and mechanical response) as well as in the capability of incorporating iPP chains within the nanometric SBA-15 pores. Closeness to rheological percolation and a significant increase of viscosity are observed as SBA-15 content is raised, this effect being more evident for the materials prepared from the iPP with the lowest molecular weight. These composites also shift their maximum degradation to lower values under inert atmosphere but keep rather unchanged decomposition behavior in oxidant conditions. No considerable changes are found with molecular weight in their morphological characteristics, nor in the type of iPP polymorph developed. The confinement of iPP chains in the SBA-15 channels, implied by a small endotherm in the DSC melting curves, is definitely ascertained by real-time variable-temperature Small Angle X-ray Scattering measurements with synchrotron radiation, suggesting, additionally, that somewhat thicker crystallites are developed within the mesostructure in the materials prepared from the iPP with inferior molecular weight. Moreover, the SBA-15 mesoporous particles exert a reinforcing role in all cases and reduce the deformation capacity of the ultimate materials as their content is increased., This work was supported by the Agencia Estatal de Investigación (AEI, Spain) together with the European Regional Development Fund (FEDER, UE) (MAT2016-79869-C2-1-P project). Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron Light Facility with the collaboration of ALBA staff. Authors are grateful for the funding received to perform these measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Electrospinning of biodegradable metal-reinforced biopolymer

  • Leonés, Adrián
  • Lieblich, Marcela
  • Benavente, Rosario
  • González-Carrasco, José Luis
  • Peponi, Laura
MINECO (AEI/FEDER,UE): POLYMAGIC: PCIN-2017-036; MAT2016-79869-C2-1-P, MAT2017-88123-P; RYC-2014-15595
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Outstanding mechanical characteristics in disentangled UHMWPE films processed by compression molding

  • Ferreira, Ana E.
  • Ribeiro, M. Rosario
  • Cramail, Henri
  • Lourenço, João P.
  • Lorenzo, Vicente
  • Pérez, Ernesto
  • Cerrada, María L.
The disentangled UHMWPE based materials show very high crystallinity and, consequently, an outstanding elastic modulus and hardness. An extraordinary increase of the indentation modulus (~330%) and of the hardness at surface (~250%) is observed when processing by compression is applied to nascent UHMWPE prepared in homogeneous conditions. Still higher mechanical performance related to stiffness and strength can be achieved when mesoporous SBA-15 particles are used as catalyst carrier and filler during polymerization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

SAXS measurements as indicator of iPP presence within mesoporous SBA-15 channels in iPP-SBA-15 nanocomposites

  • Barranco-García, Rosa
  • Ferreira, Ana E.
  • Ribeiro, M. Rosario
  • García-Peñas, Alberto
  • Gómez-Elvira González, José Manuel
  • Pérez, Ernesto
  • Cerrada, María L.
The results of this research show that the main (100) SBA-15 reflection of its hexagonal ordering in the SAXS region turns out a decisive sensor (as depicted in Figure 1) for learning about the presence of iPP crystallites within this mesostructure. Thus, its intensity exhibits an important change at around 100°C, correlating very well (both in temperature and relative intensity) with the low-temperature endotherm in the DSC curves, assigned to the melting of confined crystallites.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A New Insight into the Comonomer Effect through NMR Analysis in Metallocene Catalysed Propene-co-1-Nonene Copolymers

  • Wu, Qiong
  • García-Peñas, Alberto
  • Barranco-García, Rosa
  • Cerrada, María L.
  • Benavente, Rosario
  • Pérez, Ernesto
  • Gómez-Elvira González, José Manuel
The ¿comonomer effect¿ is an intriguing kinetic phenomenon in olefin copolymerization that still remains without a detailed explanation. It typically relates to the rate of enhancement undergone in ethylene and propene catalytic polymerization just by adding small fractions of an alpha-olefin. The difficulty lies in the fact that changes caused by the presence of the comonomer in reaction parameters are so conspicuous that it is really difficult to pin down which of them is the primary cause and which ones are side factors with marginal contribution to the phenomenon. Recent investigations point to the modification of the catalyst active sites as the main driving factor. In this work, the comonomer effect in the metallocene copolymerization of propene and 1-nonene is analysed and correlated to the comonomer role in the termination of the chain-growing process. The associated termination mechanisms involved furnish most of chain-free active sites, in which the selective interaction of the comonomer was proposed to trigger the insertion of monomers. A thorough characterisation of chain-end groups by means of the 1H NMR technique allows for detailing of specific transfer processes, ascribed to comonomer insertions, as well as evidencing the influence of the growing chain¿s microstructure over the different termination processes available., This research was funded by the Agencia Estatal de Investigacion (AEI, Spain), together with the European Regional Development Fund (FEDER, UE), grant number MAT2016-79869-C2-1-P. Human resources funding was provided by the Hong Kong University of Science and Technology, in the frame of the CSIC-HKUST cooperation, grant number HKUST2017-25, and by the Ministerio de Economía y Competitividad (MINECO, Spain), grant number BES-2014-070972
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Effect of iPP molecular weight on its confinement within mesoporous SBA-15 silica in extruded iPP−SBA-15 nanocomposites

  • Barranco-García, Rosa
  • Gómez-Elvira González, José Manuel
  • Ressia, Jorge A.
  • Quinzani, Lidia
  • Vallés, Enrique M.
  • Pérez, Enrique
  • Cerrada, María L.
Different nanocomposites based on two isotactic polypropylenes (iPP) and mesoporous SBA-15 silica have been attained by melt extrusion as an attempt to understand the influence of average molecular weight in the rheological behavior, morphological and crystalline features and in the final properties (thermal stability and mechanical response) as well as in the capability of incorporating iPP chains within the nanometric SBA-15 pores. Closeness to rheological percolation and a significant increase of viscosity are observed as SBA-15 content is raised, this effect being more evident for the materials prepared from the iPP with the lowest molecular weight. These composites also shift their maximum degradation to lower values under inert atmosphere but keep rather unchanged decomposition behavior in oxidant conditions. No considerable changes are found with molecular weight in their morphological characteristics, nor in the type of iPP polymorph developed. The confinement of iPP chains in the SBA-15 channels, implied by a small endotherm in the DSC melting curves, is definitely ascertained by real-time variable-temperature Small Angle X-ray Scattering measurements with synchrotron radiation, suggesting, additionally, that somewhat thicker crystallites are developed within the mesostructure in the materials prepared from the iPP with inferior molecular weight. Moreover, the SBA-15 mesoporous particles exert a reinforcing role in all cases and reduce the deformation capacity of the ultimate materials as their content is increased., This work was supported by the Agencia Estatal de Investigaci�on (AEI, Spain) together with the European Regional Development Fund (FEDER, UE) (MAT2016-79869-C2-1-P project). Ms. R Barranco-García also thanks her pre-doctoral funding (BES-2014-070972) associated with the MINECO (MAT2013-47972-C2-1-P) project. The synchrotron experiments were performed at beamline BL11-NCD at ALBA Synchrotron
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of PLA/Mg films degradation on surface physical properties and biofilm survival

  • Fernández-Calderón, M. C.
  • Romero-Guzmán, D.
  • Ferrández-Montero, Ana
  • Pérez-Giraldo, C.
  • González-Carrasco, José Luis
  • Lieblich, Marcela
  • Benavente, Rosario
  • Ferrari, Begoña
  • González-Martín, M. L.
  • Gallardo-Moreno, A. M.
New biocompatible and bioabsorbable materials are currently being developed for bone regeneration. These serve as scaffolding for controlled drug release and prevent bacterial infections. Films of polylactic acid (PLA) polymers that are Mg-reinforced have demonstrated they have suitable properties and bioactive behavior for promoting the osseointegration process. However little attention has been paid to studying whether the degradation process can alter the adhesive physical properties of the biodegradable film and whether this can modify the biofilm formation capacity of pathogens. Moreover, considering that the concentration of Mg and other corrosion products may not be constant during the degradation process, the question that arises is whether these changes can have negative consequences in terms of the bacterial colonization of surfaces. Bacteria are able to react differently to the same compound, depending on its concentration in the medium and can even become stronger when threatened. In this context, physical surface parameters such as hydrophobicity, surface tension and zeta potential of PLA films reinforced with 10% Mg have been determined before and after degradation, as well as the biofilm formation capacity of Staphylococcus epidermidis. The addition of Mg to the films makes them less hydrophobic and the degradation also reduces the hydrophobicity and increases the negative charge of the surface, especially over long periods of time. Early biofilm formation at 8 h is consistent with the physical properties of the films, where we can observe a reduction in the bacterial biofilm formation. However, after 24 h of incubation, the biofilm formation increases significantly on the PLA/Mg films with respect to PLA control. The explosive release of Mg ions and other corrosion products within the first hours were not enough to prevent a greater biofilm formation after this initial time. Consequently, the Mg addition to the polymer matrix had a bacteriostatic effect but not a bactericidal one. Future works should aim to optimize the design and biofunctionality of these promising bioabsorbable composites for a degradation period suitable for the intended application., The authors gratefully acknowledge financial support from “Ministerio de Economía y Competitividad” (PCIN-2016-146, MAT2015-63974-C4-3-R, MAT2015-63974-C4-4-R, MAT2016-79869-C2-1-P, RTI2018-096862-B-I00 (AEI/FEDER;UE)) and “Junta de Extremadura-FEDER: European Regional Development Fund” (IB16117, IB16154, GR15089, GR15025, GR18153 and GR18096). Dr. María Carbajo Sánchez is also thanked for providing valuable technical assistance with SEM in the “Servicio de análisis y caracterización de sólidos y superficies (SACSS)” within the University of Extremadura.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synchrotron and Raman Study of the Rotator Phases and Polymorphism in Tricosane Paraffin

  • Blázquez-Blázquez, Enrique
  • Barranco-García, Rosa
  • Cerrada, María L.
  • Martínez, Juan C.
  • Pérez, Ernesto
A detailed study of the phase behavior of n-paraffin C23H48 has been performed by means of real-time variable-temperature experiments with synchrotron radiation. Two detectors were employed for simultaneous analysis of the small-angle (SAXS) and wide-angle X-ray-scattering (WAXS) regions. This paraffin presents a very interesting phase behavior, involving two crystal polymorphs, three rotator phases and the liquid state. The Ostwald rule of stages is invoked to find similarities of the rotator phases with the eventual transient mesomorphic structure in the multistage model of polymer crystallization. That study is complemented by variable-temperature Raman experiments covering frequencies down to 150 cm−1. It was found that the low-frequency region is the most informative regarding the phase transitions, and specifically the intensity of the first overtone. From these analyses, several parameters are evaluated as function of temperature., This research was funded by the Agencia Estatal de Investigación (AEI, Spain) and by the European Regional Development Fund (FEDER, UE) through the project with grant number MAT2016-79869-C2-1-P. R.B.-G. pre-doctoral contract (BES-2014-070972) was funded by MINECO through the project with grant number MAT2013-47972-C2-1-P. Synchrotron experiments were funded by ALBA Synchrotron Light Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Identification of Additives in Polypropylene and Their Degradation under Solar Exposure Studied by Gas Chromatography-Mass Spectrometry

  • Blázquez-Blázquez, Enrique
  • Cerrada, María L.
  • Benavente, Rosario
  • Pérez, Ernesto
Additives are absolutely essential in the development of commercial polymeric materials. Accordingly, an exhaustive control of composition and evolution in these additives over time is necessary to validate their performance and safety during their shelf life and, consequently, their ultimate applications. Gas chromatography coupled with mass spectrometry, GC-MS, is described in the present work to identify and analyze the content of a wide variety of additives, commonly used in industrial polymeric materials. First, the identification under the present experimental protocol of additives with a relatively high molecular weight (Irganox 1330 and Irganox 1010) has been successfully attained. Second, the evolution under solar exposure over time has been analyzed by GC-MS for 11 additives and derived substances, which have been identified in a commercial polypropylene sample, estimating the corresponding depletion times. In addition, the resultant increase of carbonyl groups in the polymeric macrochains along the photo-oxidation has been also determined by infrared spectroscopy. Therefore, GC-MS is found to be a reliable tool for the analysis of the evolution of commonly used polymer additives under specific degradation conditions, which can be very useful in the formulation of improved future additivations. ©, This work was funded by project MAT2016-79869-C2-1-P(AEI/FEDER, UE)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructural details and polymorphs in poly(propylene-co-1-nonene) copolymers synthesized at different polymerization temperatures

  • García-Peñas, Alberto
  • Gómez-Elvira González, José Manuel
  • Blázquez-Blázquez, Enrique
  • Barranco-García, Rosa
  • Pérez, Ernesto
  • Cerrada, María L.
Several copolymers based on propylene with 1-nonene as comonomer have been synthesized within a wide range of compositions using a metallocene catalyst and different temperatures. The effect of the two main variables, comonomer content and polymerization temperature, on the final microstructure obtained (polymerization activity, stereochemistry and molar mass, among other details) as well as on the capability of crystallization, formation of distinct polymorphs and phase transitions, is examined. Different ordered entities are developed in these isotactic poly(propylene-co-1-nonene) copolymers depending on 1-nonene molar content: monoclinic, orthorhombic, and mesomorphic ones. A detailed analysis of the phase transitions involved is performed using real-time variable-temperature wide-angle diffraction experiments with synchrotron radiation on the sample with the highest comonomer amount. Different crystallization conditions were tested in order to attain information of the whole phase behavior. From these results, it was found that the mesophase of isotactic poly(propylene) is competing with the crystalline structures, although it recrystallizes on melting into the monoclinic phase at common differential scanning calorimetry rates., AEI/FEDER, UE, Grant/Award Number: MAT2016-79869-C2-1-P
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Variation of ultimate properties in extruded iPP-mesoporous silica nanocomposites by effect of iPP confinement within the mesostructures

  • Barranco-García, Rosa
  • Gómez-Elvira González, José Manuel
  • Ressia, Jorge A.
  • Quinzani, Lidia
  • Vallés, Enrique M.
  • Pérez, Ernesto
  • Cerrada, María L.
Nanocomposites based on isotactic polypropylene (iPP) and mesoporous silica particles of either MCM-41 or SBA-15 were prepared by melt extrusion. The effect of the silica incorporated into an iPP matrix was firstly detected in the degradation behavior and in the rheological response of the resultant composites. Both were ascribed, in principle, to variations in the inclusion of iPP chains within these two mesostructures, with well different pore size. DSC experiments did not provide information on the existence of confinement in the iPP-MCM-41 materials, whereas a small endotherm, located at about 100 °C and attributed to the melting of confined crystallites, is clearly observed in the iPP-SBA-15 composites. Real-time variable-temperature Small Angle X-ray Scattering (SAXS) experiments with synchrotron radiation turned out to be crucial to finding the presence of iPP within MCM-41 pores. From these measurements, precise information was also deduced on the influence of the MCM-41 on iPP long spacing since overlapping does not occur between most probable iPP long spacing peak with the characteristic diffractions from the MCM-41 hexagonal nanostructure in comparison with existing superposition in SBA-15-based materials., This research was funded by the Agencia Estatal de Investigación (AEI, Spain) and by the European Regional Development Fund (FEDER, UE) through the project with grant number MAT2016-79869-C2-1-P. R. Barranco-García pre-doctoral contract (BES-2014-070972) was funded by MINECO through the project with grant number MAT2013-47972-C2-1-P. Synchrotron experiments were funded by ALBA Synchrotron Light Facility
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Composites Based on Poly(Lactic Acid) (PLA) and SBA-15: Effect of Mesoporous Silica on Thermal Stability and on Isothermal Crystallization from Either Glass or Molten State

  • Díez-Rodríguez, Tamara M.
  • Blázquez-Blázquez, Enrique
  • Pérez, Ernesto
  • Cerrada, María L.
© 2020 by the authors., Several composites based on an L-rich poly(lactic acid) (PLA) with different contents of mesoporous Santa Barbara Amorphous (SBA-15) silica were prepared in order to evaluate the effect of the mesoporous silica on the resultant PLA materials by examining morphological aspects, changes in PLA phases and their transitions, and, primarily, the influence on some final properties. Melt extrusion was chosen for the obtainment of the composites, followed by quenching from the melt to prepare films. Completely amorphous samples were then attained, as deduced from X-ray diffraction and differential scanning calorimetry (DSC) analyses. Thermogravimetric analysis (TGA) results demonstrated that the presence of SBA-15 particles in the PLA matrix did not exert any significant influence on the thermal decomposition of these composites. An important nucleation effect of the silica was found in PLA, especially under isothermal crystallization either from the melt or from its glassy state. As expected, isothermal crystallization from the glass was considerably faster than from the molten state, and these high differences were also responsible for a more considerable nucleating role of SBA-15 when crystallizing from the melt. It is remarkable that the PLA under analysis showed very close temperatures for cold crystallization and its subsequent melting. Moreover, the type of developed polymorphs did not accomplish the common rules previously described in the literature. Thus, all the isothermal experiments led to exclusive formation of the α modification, and the observation of the α’ crystals required the annealing for long times at temperatures below 80 °C, as ascertained by both DSC and X-ray diffraction experiments. Finally, microhardness (MH) measurements indicated a competition between the PLA physical aging and the silica reinforcement effect in the as-processed amorphous films. Physical aging in the neat PLA was much more important than in the PLA matrix that constituted the composites. Accordingly, the MH trend with SBA-15 content was strongly dependent on aging times., This research was funded by AEI/FEDER, UE (grant number MAT2016-79869-C2-1-P) and ALBA Synchrotron Light Facility. TMDR is also grateful for her pre-doctoral funding (contract number BES-2017-082284)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bis-β-(diketonates) Zn(II) complexes substituted with thiophene: Electropolymerization, homogeneous and heterogeneous catalysis for ring opening polymerization of lactide

  • González, D. M.
  • Cruz, N. B.
  • Hernández, Loreto A.
  • Oyarce, J.
  • Benavente, Rosario
  • Manzur, C.
Two Bis-β-diketonate zinc (II) complexes were synthesized using 1-(thiophen-2-yl)butane-1,3-dione and 1-(thiophen-2-yl)-3-(thiophen-3-yl)propane-1,3-dione as ligands. By electropolymerization of their thiophenyl groups, the metallopolymers deposited on FTO electrodes were obtained. The main objective was to study the reactivity of these compounds as ROP catalysts for PLA synthesis, using directly the zinc complexes (homogeneous catalysis) and also the modified electrodes with metallopolymers (heterogeneous catalysis). The homogeneous catalysis studies allowed the optimization of the polymerization conditions, such as reaction time, catalyst concentration, and the use of benzyl alcohol as cocatalyst, as well as their influence on the conversion rate, average molecular weight and polydispersity of PLA, using rac-LA and L-LA as monomers. Also, the effect on tacticity and thermal properties were discussed. Finally, the ROP studies using immersed modified electrodes in the polymerization medium were carried out under optimized experimental conditions. These tests were positive for one of the studied compounds, reaching conversions of up to 67%. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020, 58, 557–567., The authors acknowledge the financial support from FON-DECYT Postdoctoral project 3160673 (D.M.G.), FONDEQUIP(EQM130154), the Vicerrectoría de Investigación y EstudiosAvanzados, Pontificia Universidad Católica de Valparaíso, Chile and FONDEQUIP (EQM-150106) of Universidad de Santiago de Chile. J. O. thanks CONICYT (Chile) for a doctoral fellowship N21171363. R. B. (Spain) thank the financial support from MINECO grant number MAT2016-79869-C2-1-P (AEI/FEDER, UE
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characteristics of the Non-Isothermal and Isothermal Crystallization for the ß Polymorph in PVDF by Fast Scanning Calorimetry

  • Pérez, Ernesto
  • Angulo, Irene
  • Blázquez-Blázquez, Enrique
  • Cerrada, María L.
Structuring at very high rates has become one of the current and important topics of interest in polymer science, because this is a common protocol in the processing of films or fibers with industrial applicability. This work presents the study by fast scanning calorimetry, FSC, of poly(vinylidene fluoride), paying special attention to the conditions for obtaining the ß phase of this polymer, because it is the one technologically more interesting. The results indicate that this ß phase of poly(vinylidene fluoride) is obtained when the sample is isothermally crystallized at temperatures below 60 °C. Under non-isothermal conditions, the ß polymorph begins to be observed at rates above 400 °C/s, although a coexistence with the ¿ modification is observed, so that exclusively the ß phase is obtained only at rates higher than 3000 °C/s., This research was funded by AEI/FEDER, UE (grant number MAT2016-79869-C2-1-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An effective package of antioxidants for avoiding premature failure in polypropylene random copolymer plastic pipes under hydrostatic pressure and high temperature

  • Blázquez-Blázquez, Enrique
  • Lahoz, Joaquín
  • Pérez, Enrique
  • Cerrada, María L.
Pipes of polypropylene random (PP-R) copolymers are the best choice for hot-and cold-water networks. Validation of a severe test, accomplishing the ISO 1167 standard, is mandatory to assess their service lifetime expectancy. This work evaluates the behavior shown by three commercial pipes, either the original ones (new pipes) or after being subjected to a hydrostatic pressure test at elevated temperature (aged pipes). Several features with relevance for the final performance have been examined: crystalline characteristics, phase transitions in crystalline regions, effect of high temperature and pressure on these transitions, and oxidation induction time. Moreover, the presence of inorganic fillers, and the content of different antioxidants together with their depletion, have also been analyzed. Films from the new pipes were also prepared for replication of the different environments in order to achieve a better and complete understanding of the phase transitions in the crystalline regions and of the consumption of antioxidants. Distinct environments surrounded the inner and outer parts of the pipes exposed to the failure aging test at 110C: hot water and warm dry air, respectively. These features play a key role in the loss of additives and in the subsequent initiation of degradation. Even if the crystalline characteristics are appropriate in the polymeric matrix, the success of a pipe lies in the homogeneous dispersion of components for avoiding damage at interfacial properties, and in a correct package of antioxidants used in its formulation., This research was funded by AEI/FEDER, UE (grant number MAT2016-79869-C2-1-P), by CSIC (grant number 2020AEP129) and ALBA Synchrotron Light Facility
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Composites of a polypropylene random copolymer and date stone flour: Crystalline details and mechanical response

  • Benarab, A.
  • Blázquez-Blázquez, Enrique
  • Krache, R.
  • Benavente, Rosario
  • Cerrada, María L.
  • Pérez, Enrique
Several composites were prepared based on a polypropylene random copolymer (PPR) and different amounts of date stone flour (DSF). This cellulosic fiber was silanized beforehand in order to reduce its hydrophilicity and improve the interfacial adhesion with the polymer. Other composites were also obtained, including a sorbitol derivative as an effective nucleant. Films made from these composites were prepared using two different thermal treatments, involving slow crystallization and rapid cooling from the melt. Scanning electron microscopy was used to evaluate the morphological features and the DSF particle dispersion within the PPR matrix. X‐ray diffraction experiments and differential scanning calorimetry tests were employed to assess the crystalline characteristics and for the phase transitions, paying especial attention to the effects of the DSF and nucleating agent on PPR crystallization. An important nucleation ability was found for DSF, and evidently for the sorbitol derivative. The peak crystallization temperature upon cooling was considerably increased by the incorporation of either the nucleant or DSF. Additionally, a much higher proportion of orthorhombic crystals developed in relation to the monoclinic ones. Moreover, the mechanical responses were estimated from the microhardness experiments and significant improvements were found with increasing DSF contents. All of these findings indicate that the use of silanized DSF is a fairly good approach for the preparation of polymeric eco‐composites, taking advantage of the widespread availability of this lignocellulosic material, which is otherwise wasted., This research was funded by AEI/FEDER, UE (grant number MAT2016-79869-C2-1-P), and CSIC (grant number 2020AEP129)