Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In vitro degradation of biodegradable polylactic acid/Mg composites: Influence of nature and crystalline degree of the polymeric matrix

  • Cifuentes, Sandra C.
  • Lieblich, Marcela
  • Saldaña, Laura
  • González-Carrasco, José Luis
  • Benavente, Rosario
A deeper knowledge on the degradation pattern of a biodegradable material is required before considering it for a specific application as a bioabsorbable implant. In the last few years, composites formed by polylactic-acid reinforced with Mg-based particles have been proposed for biodegradable implants. The aim of the present work is to study the effect of the type and crystalline degree of the polymeric matrix on in vitro degradation kinetics of PLA/Mg composites. The effect of the nature of the matrix has been studied by comparing a composite with a poly-L-lactic (PLLA) matrix with another with a poly-L,D-lactic (PLDA) matrix. The influence of the crystalline degree has been studied by comparing a near amorphous with a high crystalline composite. The degradation behaviour has been determined through a joint analysis of the microstructure, the changes in mass and water intake, the pH evolution in buffered and non-buffered media, and the amount of H released up to 28 days of immersion. The viability of human mesenchymal stem cells (MSCs) on the composites was also evaluated. Results show that a PLDA matrix is more effective lowering the degradation rate of Mg particles than PLLA. The crystalline degree plays a major role in PLA/Mg composites degradation. The composite with the near amorphous matrix exhibited the lowest degradation rate and the highest cell viability. Whereas, cell viability decreases markedly on the high-crystalline composites, which is likely related to the accelerated release of degradation products. These data highlight the importance of matrix crystallinity on the degradation kinetics and cytocompatibility of PLA/Mg composites., The authors thank funding from MAT2015-63974-C4-1-R , MAT2016-79869-C2-1-P, PCIN-2017-036, S2013/MIT-2862 and PI15/00752 ( ISCIII -MINECO-AES) projects. LS is supported by a Miguel Servet contract from ISCIII-MINECO-AES-FEDER-FSE. SCC is supported by a Juan de la Cierva contract FJCI-2016-29004 ., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications

  • Ferrández-Montero, Ana
  • Lieblich, Marcela
  • González-Carrasco, José Luis
  • Benavente, Rosario
  • Lorenzo, V.
  • Detsch, R.
  • Boccaccini, A. R.
  • Ferrari, Begoña
During recent years, Mg reinforced polylactic acid (PLA) composites have emerged as potential biocompatible and bioabsorbable materials for biomedical applications. It has been shown that Mg particles added to a matrix based on a biodegradable polymer can address the lack of bioactivity and the low mechanical properties of the polymers and, furthermore, it can counteract the detrimental effects associated to the high degradation rate of Mg, as alkalinization and elevated H release. Additionally, the polymer can protect the Mg particles, by tailoring their degradation rate. Former processing of these composites performed by extrusion, compression and injection molding employed Mg contents up to 10 wt%. Higher amounts of Mg resulted in heterogeneous materials and thermally degraded matrices, with the corresponding higher degradation rate. In the present work, Mg reinforced PLA films with Mg content as high as 50 wt% were obtained without compromising the thermal stability of the polymer. Firstly, a successful dispersion of Mg microparticles was achieved by a breakthrough in processing introducing a colloidal step where organic additives were added to modify the Mg particle surface and promote a chemically stable suspension. The resulting colloidal suspension was then used as feedstock to obtain composite films by tape casting. The films show advantageous in vitro behaviour in terms of degradation, hydrogen release and oxygen permeability. In addition, the viability with fibroblast cells (MEF) opens a window of opportunity for these composite films as bioabsorbable material for tissue engineering and wound dressing applications. Statement of Significance: Magnesium materials have extraordinary biodegradable properties and bioactive behavior due to release of Mg ions, which offer a promising opportunity for their applicability as biomaterials for tissue regeneration. However, Mg is one of the most reactive metals with a high degradation rate. In contact with water produces H, associated with a risk of failure of the implant. One alternative to minimize this drawback is the use of Mg particles surrounded by a biodegradable biocompatible polymer such as polylactic acid (PLA) to obtain PLA/Mg composites. In this work we processed Mg reinforced PLA in the shape of films that would be suitable for tissue regeneration. In vitro behavior of PLA/Mg films demonstrated that Mg ions increase the fibroblast cells growth., Financial support of MINECO: MAT2015-63974-C4-1, MAT2016-79869-C2-1-P, MAT2016-79869-C2-1-P (AEI/FEDER, UE), Comunidad de Madrid: ADITIMAT: S2018/NMT-4411, and M-ERA.NET PCIN-2017-036 (MINECO, Spain)., Peer Reviewed