Skip to main content

ESTUDIO DEL COMPORTAMIENTO TRIBO-ELECTROQUIMICO EN NUEVAS ALEACIONES DE TITANIO DE BAJO MODULO Y SU MODIFICACION SUPERFICIAL PARA APLICACIONES BIOMEDICAS.

MAT2014-53764-C3-1-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Bactericidal Elements Addition on the Microstructure and Mechanical Properties of Ti34Nb Alloy

  • Gil, Esther
  • Amigó Mata, A.
  • Igual Muñoz, Anna Neus
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] The functionalization of ß-Ti alloys by the addition of small amounts of bactericidal elements is interesting for biomedical applications. Thus, alloying pure titanium with highly biocompatible elements such as Nb or Ta, stabilizes the ß phase of the resulting alloy although they can also include difficulties during the fabrication process due to their refractory nature. This work studies the effect of small additions of Ag and Cu (1.5 to 3 wt.%) on the microstructure and mechanical properties of the Ti34Nb (wt.%) alloy processed by powder metallurgy. The blend elemental powders were mixed (30 rpm during 30 min). The samples were compacted at 600 MPa and sintered at 1250 ºC during 3 hours. The microstructure was analyzed by X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscope with X-Ray Spectroscopy (FESEM/ EDS). The mechanical properties were obtained by bending tests; the elastic modulus was measured by ultrasonic methods and the porosity by Archimedes test. Cu addition generates the appearance of ¿ phase sheets inside the ß phase grains. Cu also decreases the open porosity and increases the closed porosity of the material. On the contrary, Ag addition does not influence the stabilization of the ß phase and it does not modify the density, thus the total porosity of the resulting material. With respect to the influence of the alloying elements on the elastic modulus (E) of the alloys, the E of the Ti34Nb (76.8 GPa) increases with the Cu addition (92.6 GPa) and decreases with the Ag one (68.9 GPa). Therefore, silver addition, which does not modify the microstructure and slightly decrease the mechanical properties of the Ti34Nb, can be considered a good alloying element to provide antibacterial features to the titanium alloy without losing performance., The authors would like to thank the Ministry of Economy and Competitiveness for the financial under the Research Project MAT2014-53764-C3-1-R and MAT2014-53764-C3-3-R. Universitat Politècnica de València for the financial support by Researcher Training Program with the predoctoral contract dated in 28 february of 2014, European Comision due to FEDER founds to acquire investigation equipment and the Electron Microscopy Service of the Universitat Politècnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Desarrollo de aleaciones ß Ti-Nb-Mo mediante pulvimetalurgia para aplicaciones biomédicas

  • Viera Sotillo, Mauricio
[ES] Dentro del sector biomédico, el titanio y sus aleaciones han desplazado a otros materiales como el acero inoxidable 316L y las aleaciones Co-Cr por ofrecer un módulo elástico más cercano al hueso cortical, lo que reduce sustancialmente el efecto de apantallamiento de tensiones. Una manera de disminuir aún más el módulo elástico es estabilizando la fase cúbica beta (bcc) del titanio a temperatura ambiente mediante la adición de elementos como el Nb y Mo, cuya biocompatibilidad ha sido comprobada en numerosos estudios. La ruta convencional para el procesado de estas aleaciones es la fundición y/o forja, pero en esta investigación se ha optado por la pulvimetalurgia ya que el desperdicio de material es mínimo y se reducen las etapas posteriores de tratamientos térmicos y mecanizado, facilitando el procesado en general y reduciendo los costos. Además, el carácter refractario de los elementos estabilizadores beta justifica aún más el empleo de un método de consolidación en estado sólido como la pulvimetalurgia donde no es necesario alcanzar temperaturas tan elevadas. Por tanto, en una primera aproximación se han procesado aleaciones de Ti-xNb-yMo (x = 13, 20, 27, 35 ; y = 12, 10, 8, 6; % en peso) mediante pulvimetalurgia convencional para estudiar el efecto del Nb y Mo en la microestructura y propiedades mecánicas de las aleaciones. A fin de atacar otros problemas inherentes del proceso como la porosidad y la falta de homogeneidad en la microestructura se ha acudido a la mezcla mecánica de polvos de la aleación Ti-35Nb-6Mo, evaluando también el efecto de diferentes agentes controladores de proceso en la molienda. Por último, se ha tratado la superficie de las aleaciones Ti-27Nb-8Mo y Ti-35Nb-6Mo mediante fusión por láser con diferentes parámetros para estudiar la capacidad del proceso de cerrar la porosidad abierta, mejorar la homogeneidad superficial, y evaluar su efecto en la microestructura y propiedades mecánicas de las aleaciones. Pese a aumentar la porosidad en función del contenido de Nb, las aleaciones Ti-27Nb-8Mo y Ti-35Nb-6Mo de las obtenidas por mezcla elemental exhibieron las mejores propiedades en general, con una microestructura casi beta en su totalidad y un módulo de elasticidad de 67 - 74 GPa, que se acerca más al presentado por el hueso cortical en comparación con la aleación comercial Ti-6Al-4V ELI. Por su parte, la mezcla mecánica mejoró considerablemente la homogeneidad química de la aleación Ti-35Nb-6Mo, pero promovió la formación de la fase alfa y deterioró la resistencia y deformación mecánica debido a la ganancia en acritud del polvo y el aumento de la porosidad. No obstante, la microdureza de las aleaciones aumentó significativamente. En cuanto al agente controlador de proceso, el cloruro de sodio (NaCl) exhibió los mejores resultados en términos de rendimiento y distribución de tamaño de partícula, mientras que el ácido esteárico indujo la contaminación del polvo mediante la formación de la fase no deseada TiC. El tratamiento de fusión superficial por láser consiguió cerrar efectivamente la porosidad abierta de las aleaciones y mejorar la homogeneidad microestructural. Adicionalmente, promovió un aumento de la resistencia y la deformación mecánica y una leve disminución del módulo elástico en ambas aleaciones. Por último, la aleación Ti-27Nb-8Mo tratada superficialmente a 1000W y 6,67 mm/s exhibió una microestructura beta casi en su totalidad y las mejores propiedades mecánicas desde un punto de vista biomédico, con una resistencia de 1467 MPa, una deformación de 7% y un módulo de elasticidad de 67 - 72 GPa., [CA] Dins del sector biomèdic el titani i els seus aliatges han desplaçat a altres materials com l'acer inoxidable 316L i els aliatges Co-Cr per oferir un mòdul elàstic inferior i més pròxim a l'os cortical, la qual cosa redueix substancialment l'efecte d'apantallament de tensions. Una manera de disminuir encara més el mòdul elàstic és estabilitzant la fase cúbica beta; (bcc) del titani a temperatura ambient mitjançant l'addició d'elements altament biocompatibles com el Nb i Mo. La ruta convencional per al processament d'aquests aliatges és la fosa i/o forja, però en aquesta recerca s'ha optat per la pulvimetalurgia ja que el desaprofitament de material és mínim i es redueixen les etapes posteriors de tractament tèrmics i mecanitzat, facilitant el processament en general i reduint els costos. A més, el caràcter refractari dels elements estabilitzadors beta justifica encara més l'ús d'un mètode de consolidació en estat sòlid com la pulvimetalurgia on no és necessari aconseguir temperatures tan elevada. Per tant, en una primera aproximació s'han processat aliatges de Tu-xNb-yMo (x = 13, 20, 27, 35 ; i = 12, 10, 8, 6; % en pes) mitjançant pulvimetalurgia convencional per a estudiar l'efecte del Nb i Mo en la microestructura i propietats mecàniques dels aliatges. A fi d'atacar altres problemes inherents del procés com la porositat i la falta d'homogeneïtat en la microestructura s'ha acudit a la mescla mecànica de pólvores de l'aliatge Tu-35Nb-6Mo, avaluant també l'efecte de diferents agents antiadherentes en la mòltaa. Finalment, s'ha tractat la superfície dels aliatges Tu-27Nb-8Mo i Tu-35Nb-6Mo mitjançant fusió per làser amb diferents paràmetres per a estudiar la capacitat del procés per a tancar la porositat oberta, millorar l'homogeneïtat superficial, i avaluar el seu efecte en la microestructura i propietats mecàniques dels aliatges. Malgrat augmentar la porositat en funció del contingut de Nb, els aliatges Tu-27Nb-8Mo i Tu-35Nb-6Mo van exhibir les millors propietats en general. La mescla mecànica va millorar l'homogeneïtat química de l'aliatge Tu-35Nb-6Mo però va deteriorar les propietats mecàniques amb excepció de la microdureza. El tractament de fusió superficial per làser va aconseguir tancar efectivament la porositat oberta dels aliatges i va millorar l'homogeneïtat microestructural i les propietats mecàniques. Finalment, l'aliatge Tu-27Nb-8Mo tractada superficialment a 1000W i 6,67 mm/s va exhibir una microestructura beta gairebé íntegrament i les millors propietats mecàniques des d'un punt de vista biomèdic., [EN] Within the biomedical sector, titanium and its alloys have replaced other materials such as 316L stainless steel and Co-Cr alloys due to a lower elastic modulus, closer to the cortical bone, which significantly reduces the stress shielding effect. An alternative to decrease the elastic modulus even more is to stabilize the cubic beta phase (bcc) of titanium at room temperature by adding highly biocompatible elements such as Nb and Mo. These alloys are normally processed by casting and/or forging, but in this work powder metallurgy was conducted due to lower material waste and less subsequent stages of heat treatments and machining, reducing costs significantly. Moreover, the refractory nature of beta stabilizing elements justifies even more the use of a solid-state consolidation method such as powder metallurgy where it is not necessary to reach meting point temperatures. Therefore, in a first approach, Ti-xNb-yMo alloys (x = 13, 20, 27, 35; y = 12, 10, 8, 6;% by weight) were processed by conventional powder metallurgy to study the effect of Nb and Mo in the microstructure and mechanical properties of the alloys. In order to attack other powder metallurgy inherent problems, such as porosity and inhomogeneity in the microstructure, mechanical mixing was carried out for the Ti-35Nb-6Mo powder, evaluating the effect of different non-stick agents on the milling process. Finally, the surface of Ti-27Nb-8Mo and Ti-35Nb-6Mo alloys were treated by laser surface melting under different parameters to reduce open porosity, improve surface homogeneity, and evaluate its effect. in the microstructure and mechanical properties of alloys. Despite increasing porosity with the increase of Nb content, Ti-27Nb-8Mo and Ti-35Nb-6Mo alloys exhibited the best overall properties, consisting of a beta phase microstructure. Mechanical mixing improved the chemical homogeneity of the Ti-35Nb-6Mo alloy but deteriorated the mechanical properties with the exception of microhardness. The laser surface melting treatment effectively closed the open porosity in the alloys and improved the microstructural homogeneity and mechanical properties. Lastly, the Ti-27Nb-8Mo alloy which surface was treated at 1000W and 6.67 mm/s exhibited a beta microstructure and the best mechanical properties from a biomedical point of view. Despite increasing porosity with Nb addition, Ti-27Nb-8Mo and Ti-35Nb-6Mo alloys exhibited the best overall properties, both consisting of a beta phase microstructure and an elastic modulus of 67 - 74 GPa, which is closer to the cortical bone in comparison to the commercial Ti-6Al-4V ELI alloy. On the other hand, the mechanical mixing significantly improved the chemical homogeneity of the Ti-35Nb-6Mo alloy, but induced the formation of alfa phase and deteriorated the resistance and mechanical deformation due to the increase in porosity and the hardening effect produced during the milling process. Therefore, the microhardness increased significantly. Regarding the process control agent, sodium chloride (NaCl) exhibited the best results in terms of powder yield and particle size distribution, while stearic acid induced contamination by the formation of the undesired TiC phase. The laser surface melting treatment was able to effectively close the open porosity of the alloys and improve microstructural homogeneity. Moreover, it promoted an increase in strength and mechanical deformation and a slight decrease in the elastic modulus in both alloys. Finally, the surface-treated Ti-27Nb-8Mo alloy at 1000W and 6.67 mm/s exhibited almost an entirely beta phase microstructure and the best mechanical properties from a biomedical point of view, with a resistance of 1467 MPa, a deformation of 7% and a modulus of elasticity of 67 - 72 GPa., El trabajo se realizó en el Instituto de Tecnología de Materiales y en el Departamento de Ingeniería Mecánica y de Materiales de la Universitat Politècnica de València, bajo la ayuda del proyecto MAT2014-53764-C3-1-R del Ministerio de Economía y Competitividad de España, y la subvención 2016/020 del programa SANTIAGO GRISOLIA, enmarcada en la convocatoria del 2015 de la Conselleria de Educación, Cultura y Deporte de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influencia de la morfología nanotubular en la mojabilidad y ángulo de contacto de las aleaciones Ti6Al4V ELI, Influence of the nanotubular morphology on the wettability and contact angle of Ti6Al4V ELI alloy

  • Lario-Femenía, Joan|||0000-0003-4843-3334
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Segovia-López, Francisco|||0000-0002-4143-5751
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] The implant Osseointegration rate depends, among other factors, on the surface's topography and chemical composition, as in the interactions between the implant surface and cells. In this work the surface free energy for three surface treatments was calculated through contact angle measurements. For the anodic oxidized samples, a heat treatment was carried out to evaluate the influence of this process on the reduction of fluorine content. The aim of this work was study the influence of surface morphology and chemical composition on the alloy's wettability behavior. The contact angle measurement was analyzed by the sessile drop method. The nanotubes morphology was evaluated by Field Emission Scanning Electron Microscopy (FESEM). The surface composition was analyzed by Energy Dispersive Spectroscopy (EDS). The non-photoinduced nanotubes surface free energy was higher than the polished or acid etched samples. The heat treatment lowered the F/Ti ratio in the nanotube and decreased the contact angle, increasing the interaction with the surface., [ES] La tasa de osteointegración de los implantes, entre otros factores, depende de la topografía y de la composición química de la superficie, así como de las interacciones entre la superficie del implante y las células. Con el objetivo de evaluar esta interacción, el presente trabajo evalúa la energía superficial de tres acabados superficiales a partir de la medición del ángulo de contacto. En cuanto al acabado superficial de nanotubos se ha llevado a cabo un tratamiento térmico para evaluar la influencia de este proceso en la reducción del contenido de flúor. El objetivo de este estudio es evaluar la influencia de la morfología y composición de la superficie en la mojabilidad de la aleación. La medición del ángulo de contacto se realizó empleando un goniómetro óptico. La microscopía electrónica de barrido de emisión de campo (FESEM) ha permitido realizar un estudio del diámetro y espesor de los nanotubos. El análisis de espectrometría de dispersión de energía de rayos X (EDS) se empleó para analizar la composición superficial. Como resultados, destacar que la energía superficial de los nanotubos no fotoinducidos es superior a las superficies desbastadas o grabadas con ácido. Por lo tanto, el tratamiento térmico permite reducir la ratio F/Ti en los nanotubos, reduciendo así, el ángulo de contacto e incrementando la energía superficial de los nanotubos con lo que la interacción de superficies se mejora., Al Ministerio de Economía y Competitividad del Gobierno de España por la financiación recibida a través del proyecto de investigación MAT2014- 53764-C3-1-R. A la Generalitat Valenciana por el proyecto PROMETEO/2016/040. A la Comisión Europea por los fondos FEDER para la adquisición de equipamiento, y al servicio de Microscopía de la Universitat Politècnica de València, por su uso.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Fe Addition on Microstructure and Properties of Powder Metallurgy Ti35Nb10Ta Alloy

  • Amigó Mata, A.
  • Afonso, C.R.M.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] The high contents of noble refractory elements of Ti35Nb10Ta (wt.%) alloy difficult the diffusion of them. The stabilization of the ß phase can be favored by the addition of Fe in ß-Ti alloys. In this work, elemental powders mixture with different contents of Fe (0, 1.5, 3.0 and 4.5 wt.%) were used. These powders were compacted with uniaxial pressure of 600MPa and sintered at 1250°C in high vacuum. The porosity obtained after sintering shows a dependence on the particle size of iron used, and homogeneous pores distribution was observed. The analyzed microstructure mainly corresponds to ß-Ti phase, with small fractions of ¿ phase appearing at grain boundaries, which decreases with increasing of Fe content. The microstructure showed good compositional homogeneity of Fe and Ta and some lack of diffusion related to large amount of undissolved Nb particles. Addition of Fe lead to a decrease in bending strength of Ti35Nb10Ta alloy., Authors would like to thank the Universitat Politècnica de València (UPV) for the financial support by Researcher Training Program. The Spanish Ministry of Economy and Competitiveness under the Research Project MAT2014-53764-C3-1-R and Generalitat Valenciana for the financial support. European Commission due to FEDER founds to acquire investigation equipment and the Electron Microscopy Service (SME) of the Universitat Politècnica de València (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of Heat Treatment and UV Irradiation on the Wettability of Ti35Nb10Ta Nanotubes

  • Lario-Femenía, Joan|||0000-0003-4843-3334
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] The implant osseointegration rate depends on the surface¿s topography and chemical composition. There is a growing interest in the anodic oxidation process to obtain an oxide layer with a nanotube morphology on beta titanium alloys. This surface treatment presents large surface area, nanoscale rugosity and electrochemical properties that may increase the biocompatibility and osseointegration rate in titanium implants. In this work, an anodic oxidation process was used to modify the surface on the Ti35Nb10Ta alloy to obtain a titanium nanotubes topography. The work focused on analyzing the influence of some variables (voltage, heat treatment and ultraviolet irradiation) on the wettability performance of a titanium alloy. The morphology of the nanotubes surfaces was studied by Field Emission Scanning Electron Microscopy (FESEM), and surface composition was analyzed by Energy Dispersive Spectroscopy (EDS). The measurement of contact angle for the TiO2 nanotube surfaces was measured by a video contact angle system. The surface with the non photoinduced nanotubes presented the largest contact angles. The post-heat treatment lowered the F/Ti ratio in the nanotubes and decreased the contact angle. Ultraviolet (UV) irradiation of the TiO2 nanotubes decrease the water contact angle., The authors wish to thank the Spanish Ministry of Economy and Competitiveness for the financially supportting Research Project MAT2014-53764-C3-1-R, the Generalitat Valenciana for support through PROMETEO 2016/040, the European Commission for FEDER funds that have allowed equipment to be purchased for research purposes, and also the Microscopy Service at the Polytechnic University of Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Fe content, sintering temperature and powder processing on the microstructure, fracture and mechanical behaviours of Ti-Mo-Zr-Fe alloys

  • Mohan, P.
  • Elshalakany, Abou Bakr
  • Osman, T.A.
  • Mohamed, Alaa
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] The present work studies the effect of iron on the microstructural characterization and mechanical properties of Ti12Mo6ZrxFe alloys that fabricated by two different techniques elemental blend (EB) at 600 MPa and mechanical alloying (MA) at 600 MPa and 900 MPa with different sintering temperatures. The Ti12Mo6ZrxFe (x = 1, 2, 3 and 4 wt.%) alloys were investigated to develop new biomedical materials used for dental implant application. The microstructure, residual porosity and the mechanical properties of the sintered Ti12Mo6ZrxFe alloys were investigated by using optical microscopy, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM(, Energy dispersive X-ray (EDX), microhardness and bending stress-strain curves. The results indicated that addition of Zr and a small amount of Fe improves the beta-phase stability and improving the properties of Ti-Mo alloy. In addition, with increasing the sintering temperatures, the microstructure became more homogeneous for beta phase, which decreases in the modulus and strength. The Mechanical alloying allows highly homogeneous composition and particle morphology. Bending strength in EB is much higher than MA techniques. Increasing of compaction pressure during MA technique increases the bending strength and decreases the porosity. Moreover, the Ti12Mo6Zr2Fe alloys exhibited higher bending strength/modulus ratios. (C) 2017 Elsevier B.V. All rights reserved., The authors would like to thank the SME (Electron Microscopy Service) of the Universitat Politecnica de Valencia (UPV) - Spain, the Spanish Ministry of Economy and Competitiveness under the Research Project MAT2014-53764-C3-1-R, and the European Commission due to the FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Surface Modification of Ti-35Nb-10Ta-1.5Fe by the Double Acid-Etching Process

  • Lario-Femenía, Joan|||0000-0003-4843-3334
  • Segovia-López, Francisco|||0000-0002-4143-5751
  • Amigó, Vicente|||0000-0002-2107-0273
  • Amigó Mata, A.
[EN] Surface topography and composition influence the osteoblastic proliferation and osseointegration rates, which favor the biomechanical stability of bone anchoring and implants. In recent years, beta titanium alloys have been developed, and are composed of biocompatible elements, have low elastic modulus, high corrosion resistance, and mechanical properties to improve the long performance behavior of biomaterials. In the present research, the influence of the acid-etching process was studied in Ti6Al4V ELI and Ti35Nb10Ta1.5Fe. Samples were etched in a two-step acid treatment. Surface roughness parameters were quantified under a confocal microscope, topography was studied by scanning electron microscopy, and surface composition was analyzed with energy dispersive X-ray spectroscopy. The results revealed that the two-step acid treatment changes the topography of the ß alloy, increases the surface area, and changes the chemical composition of the surface. Two differentiated regions were identified in the Ti35Nb10Ta1.5Fe alloy after the acid-etching process: The ¿ + ß region with higher values of mean roughness due to the lower chemical resistance of this region; and the ß region with lower values of roughness parameters., The authors wish to thank the Spanish Ministry of Economy and Competitiveness for the financial support of Research Project MAT2014-53764-C3-1-R, the Generalitat Valenciana for support through PROMETEO 2016/040, the European Commission via FEDER funds that have allowed the purchase of equipment for research purposes and for the Microscopy Service at the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microstructure and Mechanical Properties of Ti-Mo-Zr-Cr Biomedical Alloys by Powder Metallurgy

  • Elshalakany, Abou Bakr
  • Ali, Shady
  • Amigó Mata, A.
  • Eessaa, Ashraf K.
  • Mohan, Prakash
  • Osman, T.A.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Titanium and its alloys have been widely used as biometals due to their excellent biocompatibility, corrosion resistance and moderate mechanical properties. Ti-15Mo-6Zr-based alloys and a series of Ti-15Mo-6Zr-xCr (x = 1, 2, 3, 4 wt.%) alloys were designed and fabricated by powder metallurgy for the first time to develop novel biomedical materials. The microstructure, internal porosity and mechanical properties of the sintered Ti-15Mo-6Zr and Ti-15Mo-6Zr-xCr alloys were investigated using scanning electronic microscopy (SEM) and bending and compression tests. The experimental results indicated that the microstructure and mechanical properties of these alloys changed as different Cr levels were added. The addition of small Cr levels further increased the β-phase stability, improving the properties of the Ti-15Mo-6Zr-xCr alloy. However, all of the alloys had good ductility, and the Ti-15Mo-6Zr-2Cr alloy had lower bending and compression moduli (31 and 23 GPa, respectively) than the Ti-15Mo-6Zr-based alloys (40 and 36 GPa, respectively). Moreover, the Ti-15Mo-6Zr-2Cr alloys exhibited higher bending and compression strength/modulus ratios, which were as large as 48.4 and 52.2, respectively; these were higher than those of the Ti-15Mo-6Zr-based alloy (41.3 and 33.6, respectively). In the search for a better implant material, β phase Ti-15Mo-6Zr-2Cr, with its low modulus, ductile properties and reasonably high strength, is a promising candidate., The authors thank the Ministry of Economy and Competitiveness for financially supporting the research project MAT2014-53764-C3-1-R and the European Commission through the Erasmus Mundus scholarship program WELCOME. The European Commission via FEDER funds allowed for the purchase of equipment for research and Microscopy Service of the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Efecto de un tratamiento térmico sobre la composición química y morfología de nanotubos de TiO2 obtenidos por anodizado, Effect of a heat treatment in the chemical composition and morphology of TIO2 nanotubes obtained by anodizing

  • Lario, Joan
  • Castaño, Oscar
  • Viera-Sotillo, Mauricio
  • Segovia-López, Francisco|||0000-0002-4143-5751
  • Amigó, Vicente|||0000-0002-2107-0273
[ES] Las prótesis metálicas deben presentar una biocompatibilidad que permita retrasar las revisiones quirúrgicas, bien por degradación de las prótesis o bien por posibles efectos citotóxicos que causen una degradación de la salud del paciente. La mejora, a corto plazo, de la biocompatibilidad se centra en el desarrollo de tratamiento superficiales a escala nanométrica que aumenten la vida útil de los implantes. Este trabajo estudia la formación de nanotubos sobre una aleación de Ti CP Grado 4 y el efecto que tiene un tratamiento térmico en la composición química y morfología de los nanotubos. Los nanotubos se han obtenido mediante anodizado electroquímico, utilizando un electrolito compuesto por ácido fosfórico y fluoruro sódico. El tratamiento térmico de las probetas de titanio anodizadas se ha realizado en alto vacío, a 320 °C y durante 30 minutos. Los parámetros de rugosidad fueron cuantificados empleando un microscopio confocal. La microscopia electrónica de barrido de emisión de campo ha permitido realizar un estudio del diámetro y espesor de los nanotubos. El análisis de espectrometría de dispersión de energía de rayos X se empleó para analizar la composición superficial de la aleación de titanio. El análisis de EDS ha mostrado que el tratamiento térmico es un proceso eficaz para eliminar el flúor retenido en los nanotubos. La rugosidad a escala nanométrica se ve modificada por el proceso de anodizado electroquímico, incrementándose el área superficial. El anodizado electroquímico permite obtener un recubrimiento superficial de óxido de titanio con estructura nanotubular, el cual no se colapsa o derrumba tras el tratamiento térmico., [EN] Metallic prosthesis must show biocompatibility, since it allows postponing surgical implant revisions due to prosthesis degradation or by the possible cytotoxic response that may cause an adverse effect on the patient health. The short-term biocompatibility improvement is focused on the development of nanoscale surface treatments that improve the lifecycle of the implants. This research is focused on the study of the nanotube growth in Ti CP Grade 4 alloy and the effect that a heat treatment has in the chemical composition and morphology of the nanotubes. Nanotubes were obtained through electrochemical anodization, employing an electrolyte composed of phosphoric acid and sodium fluoride. Heat treatment was applied in the anodized titanium samples, reaching the 320 °C for 30 min at high vacuum. Surface roughness parameters were quantified under a confocal microscopy. Diameter and thickness of the nanotubes were studied by Field Emission Scanning Electron. Surface composition was analyzed with Energy Dispersive X-Ray Spectroscopy. The EDS results revealed that the heat treatment is a feasible process to eliminate the retained fluorine element inside nanotubes. Nanoscale surface roughness was modified by electrochemical anodization process, increasing the specific surface area. The electrochemical anodization allows to obtain a oxide layer with nanotubular morphology, which does not collapse after applying the heat treatment on it., Al Ministerio de Economía y Competitividad del Gobierno de España la financiación recibida a través del proyecto de investigación MAT2014-53764-C3-1-R. A la Generalitat Valenciana por el proyecto PROMETEO/2016/040. A la Comisión Europea por los fondos FEDER para la adquisición de equipamiento .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microstructural, electrochemical and tribo-electrochemical characterisation of titanium-copper biomedical alloys

  • Guiñón Pina, Virginia
  • Igual Muñoz, Anna Neus
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] tMicrostructure, electrochemical and wear behaviour of different Titanium-copper biomedical alloys (Ti-xCu, x = 3, 7.1 and 12%wt) obtained by powder metallurgy for dental implant applications have beenanalysed in artificial saliva and compared to Ti cp. Copper in the alloy increases the amount of eutectoidin the grain boundary, favours the formation of Ti2Cu intermetallics and increases the hardness of thealloys. It enhances the cathodic reaction while slightly increasing the anodic reaction rate. Total materialloss due to the wear and corrosion decreases with the increase in the Ti2Cu intermetallics, which alsoreduces wear volume., The authors thank Spanish Government, "Ministerio de Economia y Competitividad" for the economic support (project reference MAT2014-53764-C3-1/3). They would like also to thank Siobhan Lennon, Angelica Amigo Mata, Esther Gil Garcia and the Electron Microscopy Service of the Universitat Politecnica de Valencia for the microstructural characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Investigations of Ti Binary Alloys Manufactured by Powder Metallurgy for Biomaterial Applications

  • Atay, H. Y.
  • Amigó Mata, A.
  • Haro Rodríguez, Monserrat Vicenta
  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Biomaterials encompass synthetic alternatives to the native materials found in our body. They have shown rapid growth in the field of elderly population demands with the prolongation of human life. Titanium is one of the biomaterials with excellent properties and biocompatibility. However, its high stiffness may cause weakening in the structures. To sort out this problem, Ti-Cr, Ti-Mo, and Ti-Cu alloys were produced by powder metallurgy. Metal powders were mixed by mechanical alloying. After pressing and sintering, characterizations were carried out by scanning electron microscopy, X-ray diffraction, electron backscattering diffraction, and three points bending test., The authors thank the Ministerio de Economia y Competitividad of Spain for the research project MAT2014-53764-C3-1-R, An European Commission by FEDER funds for the purchase of equipment, the Generalitat Valenciana by the PROMETEO/2016/040 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Desarrollo de las aleaciones de titanio y tratamientos superficiales para incrementar la vida útil de los implantes

  • Lario-Femenía, Joan|||0000-0003-4843-3334
  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
  • Segovia-López, Francisco|||0000-0002-4143-5751
  • Amigó, Vicente|||0000-0002-2107-0273
  • Amigó Mata, A.
[EN] The population aging together with increase of life expectancy forces the development of new prosthesis which may present a higher useful life. The clinical success of implants is based on the osseointegration achievement. Therefore, metal implants must have a mechanical compatibility with the substituted bone, which is achieved through a combination of low elastic modulus, high flexural and fatigue strength. The improvement, in the short and long term, of the osseointegration depends on several factors, where the macroscopic design and dimensional, material and implant surface topography are of great importance. This article is focused on summarizing the advantages that present the titanium and its alloys to be used as biomaterials, and the development that they have suffered in recent decades to improve their biocompatibility. Consequently, the implants evolution has been recapitulated and summarized through three generations. In the recent years the interest on the surface treatments for metallic prostheses has been increased, the main objective is achieve a lasting integration between implant and bone tissue, in the shortest time possible. On this article various surface treatments currently used to modify the surface roughness or to obtain coatings are described it; it is worthy to mention the electrochemical oxidation with post-heat treated to modify the titanium oxide crystalline structure. After the literature review conducted for prepare this article, the beta titanium alloys, with a nanotubes surface of obtained by electrochemical oxidation and a subsequent step of heat treatment to obtain a crystalline structure are the future option to improve long term biocompatibility of titanium prostheses., [ES] El envejecimiento de la población junto con el incremento de la esperanza de vida, obligan al desarrollo de prótesis que presenten un periodo de vida útil cada vez mayor. El éxito clínico de los implantes está basado en la consecución de la osteointegración. Por lo tanto, las prótesis metálicas necesitan disponer de una compatibilidad mecánica con el hueso que sustituyen, que se consigue mediante una combinación de bajo módulo elástico, alta resistencia a la rotura y a fatiga. La mejora, a corto y largo plazo, de la osteointegración es función de múltiples factores, de entre los cuales son de gran importancia su diseño macroscópico y dimensional, el material y la topografía superficial del implante. Este artículo se centra en resumir las ventajas que presentan el titanio y sus aleaciones para ser empleadas como biomateriales, y la evolución que han sufrido estas, en las últimas décadas, para mejorar su biocompatibilidad. En consecuencia, se ha recapitulado la evolución que han sufrido los implantes, resumiéndose a través de tres generaciones. En los últimos años se ha incrementado el interés en los tratamientos superficiales de las prótesis metálicas, con el objetivo de alcanzar una integración del tejido óseo duradera y en el menor tiempo posible. En este artículo se exponen varios tratamientos superficiales utilizados actualmente para modificar la rugosidad o para obtener recubrimientos superficiales; cabe destacar la oxidación electroquímica con tratamiento térmico, para modificar la estructura cristalina de los óxidos de titanio. Tras la revisión bibliográfica llevada a cabo para la redacción de este artículo, las aleaciones β de titanio, con una superficie de nanotubos obtenida mediante oxidación electroquímica y una etapa posterior de tratamiento térmico para obtener una estructura cristalina, son la opción de futuro para mejorar la biocompatibilidad a largo plazo de las prótesis de titanio., Los autores desean agradecer al Ministerio de Economía y competitividad el apoyo financiero a través del proyecto de investigación MAT2014-53764-C3-1-R y a la Generalitat Valenciana a través del apoyo PROMETEO/2016/040. A la Comisión Europea a través de los fondos FEDER que han permitido la adquisición de los equipos para la investigación y del Servicio de Microscopía de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effects of Fe and Mo Content on the Microstructure and Mechanical Properties of Ti-Mo based alloys prepared by Elemental blend and Mechanical alloying technique

  • Mohan, Prakash
  • Amigó Mata, A.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Ti and its alloys are mostly used as biomaterials due to its unique properties like high corrosion resistance, low elastic modulus, high mechanical strength/ density ratio, good biocompatibility etc. Ti-β alloys based on the Ti-Mo alloy system shows much more interest for biomaterials. Addition of Zr and small amount of Fe improves the β-phase stability and improving the properties of Ti-Mo alloy. These alloys can be produced by powder metallurgy (PM) using Elemental Blend (EB) technique (600 MPa compaction pressure) and Mechanical Alloying (MA) technique with (600 and 900 MPa compaction pressure). This paper describes the microstructural characterization obtained by SEM and mechanical properties obtained by bending test, Archimedes test and ultrasonic test of Ti-Mo-Zr-Fe alloys made by elemental blend and Mechanical Alloying. Mechanical properties and Microstructure of these powder mixing processes also compared. The addition of small amounts of Fe further increases β-phase stability, improving the properties of Ti¿15Mo¿6Zr¿xFe alloy. In the search for a better implant material, Ti¿12Mo¿6Zr¿2Fe, with its low modulus, ductile property, and reasonably high strength, is a promising candidate., The authors wish to thank the Ministry of Economy and competitiveness through the financial support of the research project MAT2014-53764-C3-1–R, The European commission the Erasmus mundus scholarship program Namaste and the Generalitat Valenciana through support ACOMP/2014/151.The European Commission via FEDER funds that have allowed the purchase of equipment for research and Microscopy Service of the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical characterization and passivation behaviour of new beta-titanium alloys (Ti35Nb10Ta-xFe)

  • Navarro-Laboulais, J.|||0000-0001-6347-5407
  • Amigó, Vicente|||0000-0002-2107-0273
  • Amigó Mata, Angèlica
  • Igual Muñoz, Anna Neus
[EN] Passivation kinetics is a crucial factor in the electrochemical behavior of passive metals and alloys when subjected to operating conditions in real systems such as biomedical devices or aeronautical applications. The aim of this work is to describe the passivation behavior of new beta-titanium alloys (Ti35Nb10Ta-xFe with x = 1.5, 3 and 4.5 where numbers indicate the %wt in the alloying elements) obtained by powder metallurgy using different electrochemical techniques and existing theoretical models for oxide film growth (High Field Model, HFM, and Interface Models, IFM). Influence of Fe content in the alloy and prevailing lectrochemical conditions (i.e. applied potential) on the kinetic parameters were analyzed. The oxide film growth can be described by a HFM approach considering that the film thickness is related to the current flowing through the system, thus constant values for passive film formation were considered. The electric field in the film and the thickness of the oxide layer were quantified. Iron content in the alloy does not significantly modifies the passive film properties of the obtained materials but decreases the passive film growth of the resulting alloy. The applied potential reduces the electric field in the oxide layer while increasing its thickness., The authors thank Spanish Government, "Ministerio de Economia y Competitividad" (project reference MAT2014-53764-C3-1/3) and to the Generalitat Valenciana PROMETEO 2016/040 for the economic support. They would like also to thank the Electron Microscopy Service of the UniversitatPolitecnica de Valencia for the microstructural characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Corrosion behaviour of Ti6Al4V ELI nanotubes for biomedical applications

  • Lario-Femenía, Joan|||0000-0003-4843-3334
  • Vicente-Escuder, Ángel|||0000-0001-8425-3424
  • Amigó, Vicente|||0000-0002-2107-0273
  • Viera, Mauricio
  • Igual Muñoz, Anna Neus
[EN] Surfaces engineering on titanium biomedical alloys aiming for improving bone regeneration, healing periods and increasing lifetime needs fora fundamental understanding of the electrochemical reactions occurring at the interface biomaterial/human fluid. There, electrochemical corrosion plays an important role in implant-tissue interaction. The aim of this study is to investigate the effect of different TiO2 surfaces and nanotubes on a Ti6Al4V ELI in their electrochemical corrosion resistance by different electrochemical techniques (open circuit potential, electrochemical impedance spectroscopy, and potentiodynamic polarization). The electrochemical behaviour of native, anodized, nanotubular and annealed nanotubular surfaces were investigated in 1 M NaCl solution. The nanotubular topography was obtained by electrochemical oxidation and the annealing treatment allowed at changing the crystalline structure of the oxides. The nanotube morphology, chemical composition, and structure was studied by Field Emission Scanning Electron Microscopy, Energy Dispersive Spectroscopy, X-ray diffraction and Transmission Electron Microscopy respectively. The results show that the anodic oxidation treatment creates a nanotubular topography that increases the surface area and changes the surface chemical composition. The electrochemical corrosion resistance decreased on the as-formed TiO2 tubes compared to the native oxide layer, due to higher surface area and amorphous crystal structure of the passive film. After annealing treatment, the fluoride ions are eliminated, and nanotubular resistance is enhanced through anatase stabilization., The authors wish to thank the Spanish Ministry of Economy and Competitiveness for the financial support of Research Project MAT2014-53764-C3-1-R, the Generalitat Valenciana for support through PROMETEO 2016/040, and the European Commission via FEDER funds to purchase equipment for research purposes and the Microscopy Service at the Valencia Polytechnic University. Thanks to Alba Dalmau and Javier Navarro Laboulais from Instituto de Seguridad Industrial y Medio Ambiente, Valencia Polytechnic University for the technical assistance with preparation of the electrochemical tests. Thanks to Irene Llorente and Jose Antonio Jimenez from CENIM/CSIC for the technical assistance with XRD characterization.