Skip to main content

ESTUDIO DEL COMPORTAMIENTO Y DESARROLLO DE MODELOS PREDICTIVOS DEL FENOMENO DE DEGRADACION TRIBO-ELECTROQUIMICO EN ALEACIONES BIOMEDICAS

MAT2014-53764-C3-3-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Bactericidal Elements Addition on the Microstructure and Mechanical Properties of Ti34Nb Alloy

  • Gil, Esther
  • Amigó Mata, A.
  • Igual Muñoz, Anna Neus
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] The functionalization of ß-Ti alloys by the addition of small amounts of bactericidal elements is interesting for biomedical applications. Thus, alloying pure titanium with highly biocompatible elements such as Nb or Ta, stabilizes the ß phase of the resulting alloy although they can also include difficulties during the fabrication process due to their refractory nature. This work studies the effect of small additions of Ag and Cu (1.5 to 3 wt.%) on the microstructure and mechanical properties of the Ti34Nb (wt.%) alloy processed by powder metallurgy. The blend elemental powders were mixed (30 rpm during 30 min). The samples were compacted at 600 MPa and sintered at 1250 ºC during 3 hours. The microstructure was analyzed by X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscope with X-Ray Spectroscopy (FESEM/ EDS). The mechanical properties were obtained by bending tests; the elastic modulus was measured by ultrasonic methods and the porosity by Archimedes test. Cu addition generates the appearance of ¿ phase sheets inside the ß phase grains. Cu also decreases the open porosity and increases the closed porosity of the material. On the contrary, Ag addition does not influence the stabilization of the ß phase and it does not modify the density, thus the total porosity of the resulting material. With respect to the influence of the alloying elements on the elastic modulus (E) of the alloys, the E of the Ti34Nb (76.8 GPa) increases with the Cu addition (92.6 GPa) and decreases with the Ag one (68.9 GPa). Therefore, silver addition, which does not modify the microstructure and slightly decrease the mechanical properties of the Ti34Nb, can be considered a good alloying element to provide antibacterial features to the titanium alloy without losing performance., The authors would like to thank the Ministry of Economy and Competitiveness for the financial under the Research Project MAT2014-53764-C3-1-R and MAT2014-53764-C3-3-R. Universitat Politècnica de València for the financial support by Researcher Training Program with the predoctoral contract dated in 28 february of 2014, European Comision due to FEDER founds to acquire investigation equipment and the Electron Microscopy Service of the Universitat Politècnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microstructural, electrochemical and tribo-electrochemical characterisation of titanium-copper biomedical alloys

  • Guiñón Pina, Virginia
  • Igual Muñoz, Anna Neus
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] tMicrostructure, electrochemical and wear behaviour of different Titanium-copper biomedical alloys (Ti-xCu, x = 3, 7.1 and 12%wt) obtained by powder metallurgy for dental implant applications have beenanalysed in artificial saliva and compared to Ti cp. Copper in the alloy increases the amount of eutectoidin the grain boundary, favours the formation of Ti2Cu intermetallics and increases the hardness of thealloys. It enhances the cathodic reaction while slightly increasing the anodic reaction rate. Total materialloss due to the wear and corrosion decreases with the increase in the Ti2Cu intermetallics, which alsoreduces wear volume., The authors thank Spanish Government, "Ministerio de Economia y Competitividad" for the economic support (project reference MAT2014-53764-C3-1/3). They would like also to thank Siobhan Lennon, Angelica Amigo Mata, Esther Gil Garcia and the Electron Microscopy Service of the Universitat Politecnica de Valencia for the microstructural characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Wear model for describing the time dependence of the material degradation mechanisms of the AISI 316L in a NaCl solution

  • Dalmau-Borrás, Alba
  • Roda Buch, Alejandro
  • Igual Muñoz, Anna Neus
  • Rovira, Andres|||0000-0001-8192-5571
  • Navarro-Laboulais, J.|||0000-0001-6347-5407
[EN] The tribo-electrochemical behavior of AISI 316L has been investigated under tribocorrosion conditions in a 3% NaCl solution and the material damage evolution with time has been analyzed. A numerical contact model based on a Boundary Element Method (BEM) has been developed in order to determine the contact pressure distribution and to quantify the worn material as a function of time. The time dependence of the tribological behavior of the material has been described. At the initial state, the high contact pressures generate a material flow causing an increase in the worn area. After around 300 cycles, the Archard wear model linearly describes the wear evolution with time. The proposed model describes the evolution with time of the wear profiles of the tested material and takes into account the plastic behavior of the material during the first cycles., This work has been funded by the Spanish Ministry of Economy and Competitiveness under the Ref. MAT2014-53764-C3-3-R and the Generalitat Valenciana under the PROMETEO program Ref. 2016/040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical characterization and passivation behaviour of new beta-titanium alloys (Ti35Nb10Ta-xFe)

  • Navarro-Laboulais, J.|||0000-0001-6347-5407
  • Amigó, Vicente|||0000-0002-2107-0273
  • Amigó Mata, Angèlica
  • Igual Muñoz, Anna Neus
[EN] Passivation kinetics is a crucial factor in the electrochemical behavior of passive metals and alloys when subjected to operating conditions in real systems such as biomedical devices or aeronautical applications. The aim of this work is to describe the passivation behavior of new beta-titanium alloys (Ti35Nb10Ta-xFe with x = 1.5, 3 and 4.5 where numbers indicate the %wt in the alloying elements) obtained by powder metallurgy using different electrochemical techniques and existing theoretical models for oxide film growth (High Field Model, HFM, and Interface Models, IFM). Influence of Fe content in the alloy and prevailing lectrochemical conditions (i.e. applied potential) on the kinetic parameters were analyzed. The oxide film growth can be described by a HFM approach considering that the film thickness is related to the current flowing through the system, thus constant values for passive film formation were considered. The electric field in the film and the thickness of the oxide layer were quantified. Iron content in the alloy does not significantly modifies the passive film properties of the obtained materials but decreases the passive film growth of the resulting alloy. The applied potential reduces the electric field in the oxide layer while increasing its thickness., The authors thank Spanish Government, "Ministerio de Economia y Competitividad" (project reference MAT2014-53764-C3-1/3) and to the Generalitat Valenciana PROMETEO 2016/040 for the economic support. They would like also to thank the Electron Microscopy Service of the UniversitatPolitecnica de Valencia for the microstructural characterisation.