Skip to main content

CORROSION, MOJABILIDAD Y PROCESOS DE OXIDACION AVANZADA DE IMPLANTES POROSOS BIODEGRADABLES Y PLATAFORMAS MICRO-ROBOTICAS INNOVADORAS PARA TRATAMIENTO DE AGUAS

MAT2014-57960-C3-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre FUNDACION CIDETEC

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ni-, Pt- and (Ni/Pt)-doped TiO₂ nanophotocatalysts, a smart approach for sustainable degradation of Rhodamine B dye

  • Pol, Roberto|||0000-0002-4387-4061
  • Guerrero, Miguel|||0000-0001-8350-8261
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Altube, Ainhoa
  • Rossinyol Casals, Emma|||0000-0002-1656-1254
  • Garroni, Sebastiano|||0000-0001-7686-6589
  • Baró, M. D.|||0000-0002-8636-1063
  • Pons Picart, Josefina|||0000-0003-1834-9326
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Ni (1 wt%)-, Pt (1 wt%)- and [Ni (0.5 wt%)/Pt (0.5 wt%)]-doped TiO₂ nanoporous catalysts have been successfully obtained through a facile two-step hydrothermal route. TiO₂ crystallizes mostly in the anatase phase and acts as a mesoporous matrix. Meanwhile, Ni, Pt and Ni/Pt dopants form small nanoparticles (NPs) (3-95 nm in diameter) which are hosted by the TiO₂ framework. The resulting composites exhibit a rather large surface area, in the range of 186-200 m2/g. The band gap energy reduces from 3.03 eV for the undoped TiO₂ to 2.15 eV for the Pt-loaded TiO₂. As a consequence, absorption expands toward the visible light range. The photodegradation of Rhodamine B dye in aqueous medium has been investigated under UV-vis light irradiation. The presence of Ni, Pt and Ni/Pt NPs significantly enhances the photocatalytic activity of the material. Furthermore, the Ni-doped TiO₂ shows ferromagnetic behavior at room temperature, which makes its recovery and subsequent fast reutilization possible. Interestingly, this sample also exhibits the best stability upon recycling. Considering all the current challenges in sustainable water remediation, these new photocatalysts could find applications in real environmental contexts in the near future.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sub-micron magnetic patterns and local variations of adhesion force induced in non-ferromagnetic amorphous steel by femtosecond pulsed laser irradiation

  • Zhang, Huiyan
  • Feng, Yuping
  • Nieto, Daniel
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Mcdaniel, Clare
  • Díaz Marcos, Jordi
  • Flores-Arias, María Teresa
  • O'connor, Gerard M.
  • Baró, M. D.|||0000-0002-8636-1063
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Periodic ripple and nanoripple patterns are formed at the surface of amorphous steel after femtosecond pulsed laser irradiation (FSPLI). Formation of such ripples is accompanied with the emergence of a surface ferromagnetic behavior which is not initially present in the non-irradiated amorphous steel. The occurrence of ferromagnetic properties is associated with the laser-induced devitrification of the glassy structure to form ferromagnetic (α-Fe and Fe₃C) and ferrimagnetic [(Fe,Mn)₃O₄ and Fe₂CrO4] phases located in the ripples. The generation of magnetic structures by FSPLI turns out to be one of the fastest ways to induce magnetic patterning without the need of any shadow mask. Furthermore, local variations of the adhesion force, wettability and nanomechanical properties are also observed and compared to those of the as-cast amorphous alloy. These effects are of interest for applications (e.g., biological, magnetic recording, etc.) where both ferromagnetism and tribological/adhesion properties act synergistically to optimize material performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Novel Fe-Mn-Si-Pd alloys: insights on mechanical, magnetic, corrosion performance and biocompatibility

  • Feng, Yuping
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Zhang, Huiyan
  • Solsona, Pau|||0000-0001-9274-2447
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Barrios, Leonardo|||0000-0002-6151-8503
  • Pellicer, Eva|||0000-0002-8901-0998
  • Nogués, Carme|||0000-0002-6361-8559
  • Sort, Jordi|||0000-0003-1213-3639
Two new Fe-based alloys, Fe-10Mn6Si1Pd and Fe-30Mn6Si1Pd, have been fabricated by arc-melting followed by copper mold suction casting. The Fe-30Mn6Si1Pd alloy mainly consists of ε-martensite and γ-austenite Fe-rich phases whereas the Fe-10Mn6Si1Pd alloy primarily contains α-Fe(Mn)-ferrite phase. Additionally, Pd-rich precipitates were detected in both alloys. Good mechanical response was observed by nanoindentation: hardness values around 5.6 GPa and 4.2 GPa and reduced Young's modulus values of 125 GPa and 93 GPa were measured for the as-prepared Fe-10Mn6Si1Pd and Fe-30Mn6Si1Pd alloys, respectively. Both alloys are thus harder and exhibit lower Young's modulus than 316L stainless steel, which is one of the most common Fe-based reference materials for biomedical applications. Compared with the ferromagnetic Fe-10Mn6Si1Pd alloy, the paramagnetic Fe-30Mn6Si1Pd alloy is more appropriate to be used as an implant since it would be compatible with nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) analyses. Concerning biocompatibitliy, the more hydrophilic Fe-10Mn6Si1Pd shows improved cell adhesion but its pronounced ion leaching has a negative effect on the proliferation of cells. The influence of immersion in simulated body fluid on composition, microstructure, mechanical and magnetic properties of both alloys is assessed, and the correlation between microstructure evolution and physical properties is discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanoporous Fe-based alloy prepared by selective dissolution, an effective Fenton catalyst for water remediation

  • Zhang, Huiyan
  • Feng, Yuping
  • Cheng, Yangyang
  • Baró, M. D.|||0000-0002-8636-1063
  • Altube, Ainhoa
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Alcaide, Francisco|||0000-0002-3373-3978
  • Pellicer, Eva|||0000-0002-8901-0998
  • Zhang, Tao
  • Sort, Jordi|||0000-0003-1213-3639
A fully nanoporous Fe-rich alloy, prepared by selective dissolution of melt-spun Fe₄₃.₅Cu₅₆.₅ ribbons, exhibits outstanding properties as a heterogeneous Fenton catalyst toward the degradation of methyl orange (MO) in aqueous solution. In addition, the ferromagnetic characteristics of this material enable its wireless manipulation toward specific locations within polluted wastewater. The influence of selective dissolution on the microstructure, sample morphology (surface and cross-section), elemental composition, and magnetic properties of the resulting nanoporous alloy is investigated. The dealloying procedure enhances the saturation magnetization and drastically increases the catalytic performance (i.e., the time required for full degradation of MO from the medium is reduced by a factor of approximately 2 by subjecting the Fe43.5Cu56.5 ribbons to prior dealloying). Remarkably, the effectiveness of this nanoporous material surpasses the results obtained by the homogeneous Fenton reaction using an equivalent concentration of Fe cations leached into the media from the nanoporous alloy. The different factors that promote the high catalytic activity are discussed. The outstanding catalytic activity, together with the simplicity of the synthetic procedure, makes this material very appealing for water remediation using advanced Fenton processes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A facile co-precipitation synthesis of heterostructured ZrO₂/ZnO nanoparticles as efficient photocatalysts for wastewater treatment

  • Quintana, Alberto|||0000-0002-9813-735X
  • Altube, Ainhoa
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
  • Guerrero, Miguel|||0000-0001-8350-8261
ZrO₂-decorated ZnO (ZrO₂/ZnO) nanoparticles (NPs) have been synthesized by a facile co-precipitation method in the presence of cetyltrimethylammonium bromide (CTAB) surfactant. The ZrO₂ amount in the NPs has been varied from 1.0, 2.0, 4.9, to 9.3% by weight. The resulting NPs are heterostructured and consist of a crystalline ZnO core (wurtzite phase) surrounded by an amorphous ZrO₂ layer. X-ray diffraction analyses support this observation. The NPs show a narrow size distribution and are slightly elongated. Compared to pure ZnO NPs, the hybrid ZrO₂/ZnO ones show enhanced photocatalytic activity toward the degradation of Rhodamine B under UV-Vis light. Such enhancement has been partly attributed to the increased amount of oxygen vacancies when ZrO₂ is incorporated into the NPs, as shown by X-ray photoelectron spectroscopy analyses.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal treatment effect on the mechanical, tribological and corrosion properties of Ni-W alloy obtained by direct and pulse plating electrodeposition

  • Imaz, Naroa
  • Díez, J. A.
  • Grande, H.
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Ni-W electrodeposits have emerged as one of the most suitable alternatives to hard chromium mainly owing to their remarkable mechanical and tribological properties. Additionally, advanced technologies that require materials resistant to high temperatures could benefit from the use of Ni-W coatings. In this work, the effect of thermal treatment at different temperatures (300, 500, 700°C) on the characteristics of Ni-W coatings obtained by direct and pulse plating (PP) was studied. The morphology, composition, crystalline structure, hardness, wear rate, friction coefficient and corrosion resistance of the thermally treated coatings were analysed and compared with the performance of hard chromium coatings. The results indicate that the pulse-plated Ni-W coatings show better mechanical and tribological properties than the ones obtained by direct current. A significant improvement in hardness in Ni-W layers was achieved by thermal treatment, mainly in the films grown by PP, with minor changes in wear resistance and corrosion performance.