Skip to main content

MANIPULACION SUPERFICIAL DE MATERIALES NANOESTRUCTURADOS PARA APLICACIONES INNOVADORAS: TRATAMIENTOS MECANICOS SUPERFICIALES Y MEDIANTE IRRADIACION CON HACES DE IONES

MAT2011-27380-C02-01

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mechanical Properties and Corrosion Behaviour of Nanostructured Cu-rich CuNi Electrodeposited Films

  • Varea Espelt, Aïda
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pellicer, Eva|||0000-0002-8901-0998
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
Nanocrystalline Cu-rich CuNi alloy thin films (with copper content ranging from 22 to 97 at%) have been grown by electrodeposition, using galvanostatic conditions in an electrolytic bath containing Ni and Cu sulphates with a [Ni(II)]/[Cu(II)] molar ratio of 11. The Cu content is tuned by varying the applied current density during deposition. The nanoscrystalline nature of Cu-rich CuNi thin films has been achieved using saccharine as a grain refinement agent, although for high Cu content (.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Localized electrochemical deposition of porous Cu-Ni microcolumns: insights into the growth mechanisms and the mechanical performance

  • Pellicer, Eva|||0000-0002-8901-0998
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Panagiotopoulo, V.
  • Fusco, S.
  • Sivaraman, K. M.
  • Baró, M. D.|||0000-0002-8636-1063
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Sort, Jordi|||0000-0003-1213-3639
Cu-rich Cu-Ni alloy microcolumns (11-35 at% Ni) with large porosity degree were grown by localized electrochemical deposition (LECD) at voltages of 6.5 and 7.0 V. In turn, conventional electrodeposition was used to deposit fully-compact Cu-Ni films with analogous Ni/Cu ratios from a similar citrate-containing electrolytic solution. The localized supply rate of the predominant Cu(II) and Ni(II) electroactive species in the LECD microregion was calculated assuming both large and small concentration gradients. A shortage of Cu(II) at the cathode surface is mainly responsible for the development of porosity in the microcolumns, which directly affects mechanical performance, specifically nanoindentation hardness and Young's modulus. From nanoindentation experiments, a relative microcolumn density ranging between 14 and 20% was determined. These values indicate the current efficiency of the LECD process and can be used to calculate the consumption rates associated with metal cation electroreduction.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hard and transparent films formed by nanocellulose-TiO2 nanoparticle hybrids

  • Schütz, Christina
  • Sort, Jordi|||0000-0003-1213-3639
  • Bacsik, Zoltán
  • Oliynik, Vitaliy
  • Pellicer, Eva|||0000-0002-8901-0998
  • Fall, Andreas|||0000-0002-9816-5270
  • Wagberg, Lars
  • Berglund, Lars
  • Bergström, Lennart
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
T he formation of hybrids of nanofibrillated cellulose and titania nanoparticles in aqueous media has been studied. Their transparency and mechanical behavior have been assessed by spectrophotometry and nanoindentation. The results show that limiting the titania nanoparticle concentration below 16 vol% yields homogeneous hybrids with a very high Young's modulus and hardness, of up to 44 GPa and 3.4 GPa, respectively, and an optical transmittance above 80%. Electron microscopy shows that higher nanoparticle contents result in agglomeration and an inhomogeneous hybrid nanostructure with a concomitant reduction of hardness and optical transmittance. Infrared spectroscopy suggests that the nanostructure of the hybrids is controlled by electrostatic adsorption of the titania nanoparticles on the negatively charged nanocellulose surfaces.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

White-light photoluminescence and photoactivation in cadmium sulfide embedded in mesoporous silicon dioxide templates studied by confocal laser scanning microscopy

  • Pellicer, Eva|||0000-0002-8901-0998
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Rossinyol Casals, Emma|||0000-0002-1656-1254
  • Rosado, Marcos|||0000-0003-3938-9132
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Domingo Roca, Roger|||0000-0002-0557-5431
  • Castell Ordinas, Onofre
  • Baró, M. D.|||0000-0002-8636-1063
  • Roldán, Mónica
  • Sort, Jordi|||0000-0003-1213-3639
SBA-15 and SBA-16 silica templates have been infiltrated with CdS by means of nanocasting using a hybrid precursor. The morphology and structure of both the SiO2@CdS nanocomposites and the silica-free CdS replicas have been characterized. The three-dimensional nanocrystalline CdS networks embedded in SBA-15 and SBA-16 silica templates exhibit broad photoluminescence (PL) spectra over the entire visible range, together with enhanced PL intensity compared to silica-free CdS replicas. These effects result from the role silica plays in passivating the surface of the CdS mesostructures. Furthermore, photoactivation is eventually observed during continuous illumination because of both structural and chemical surface odifications. Owing to this combination of properties, these materials could be appealing for solid-state lighting, where ultra-bright near-white PL emission is indispensable.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tailoring the physical properties of electrodeposited CoNiReP alloys with large Re content by direct, pulse, and reverse pulse current techniques

  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Özkale, Berna|||0000-0002-3016-9363
  • Sivaraman, Kartik M.
  • Ruiz-Camps, C.
  • Baró, M. D.|||0000-0002-8636-1063
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
The composition, surface morphology and structure of CoNiReP alloy films with large Re content (up to 27 at%), obtained in a citrate-glycine based electrolyte have been studied as a function of the electrodeposition technique. Direct current (DC), pulse plating (PP) and reverse pulse plating (RPP) were considered with cathodic current densities from -50 mA cm-2 to -250 mA cm-2. The mechanical and magnetic properties have been analyzed and the data obtained has been correlated with composition and crystallographic structure. For values of j (DC), jon (PP) and jc (RPP) below -100 mA cm-2, Co-rich, P-containing deposits are obtained. Beyond these current densities, both the quantities of Ni and Re increase simultaneously at the expense of Co and P, the latter virtually falling to zero. The highest Re percentage (25-27 at%) was achieved in both PP and RPP conditions at a cathodic pulse of -250 mA cm-2. All the films were either entirely nanocrystalline in nature or partially amorphous. Hardness values as high as 9.2 GPa have been found in PP plated Co64Ni18Re18 deposits. Besides the large hardness, the incorporation of Re in the films leads to high elastic recovery values. The magnetic character of the deposits ranges from soft to semi-hard ferromagnetic.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Anodic formation of self-organized Ti(Nb,Sn) oxide nanotube arrays with tuneable aspect ratio and size distribution

  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Oliveira, N. T. C.
  • Pellicer, Eva|||0000-0002-8901-0998
  • Steenberge, Nele van
  • Baró, M. D.|||0000-0002-8636-1063
  • Bolfarini, Claudemiro
  • Sort, Jordi|||0000-0003-1213-3639
In the present communication one-step anodization is used to prepare large arrays of self-assembled Ti(Nb,Sn) oxide nanotubes on Ti-Nb-Sn alloy. Tuneable nanoscale geometries (unimodal vs. bimodal size distribution with variable length/diameter ratios) can be controllably achieved by varying the anodization conditions, which are highly desirable for enhanced functionalities in widespread applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A comparison between fine-grained and nanocrystalline electrodeposited Cu-Ni films. Insights on mechanical and corrosion performance

  • Pellicer, Eva|||0000-0002-8901-0998
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Varea Espelt, Aïda
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sivaraman, K. M.
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
Cu1-x-Nix (0.43 ≤ x ≤ 1.0) films were electrodeposited from citrate-sulphate baths at different current densities onto Cu/Ti/Si (100) substrates with the addition of saccharine as a grain-refining agent. The Cu-Ni alloy films produced from saccharine-free baths were fine-grained (crystallite size of ~400 nm). The addition of saccharine to the electrolytic solution induced a dramatic decrease in crystal size (down to ~27 nm) along with a reduction in surface roughness. Although the effect of saccharine on pure Ni films was less obvious, significant changes were observed due to the presence of saccharine in the bath during the alloying of Cu with Ni. Compared to fine-grained Cu-Ni films, the nanocrystalline films exhibited lower microstrains and a larger amount of stacking faults as observed by X-ray diffraction. These features enhance the mechanical properties of the Cu-Ni alloys, making the nanocrystalline Cu-Ni films superior to both the corresponding fine-grained films and pure Ni films. In particular, hardness in fine-grained films varied from 4.2 (x=0.43) to 5.4 GPa (x=0.86), whereas hardness varied between 6.7 and 8.2 GPa for nanocrystalline films of similar composition. In addition, wear resistance and elastic recovery were enhanced. Nanostructuring did not significantly affect corrosion resistance of Cu-Ni alloys in chloride media. Although the corrosion potential shifted slightly towards more negative values, the corrosion current density decreased, thereby making the electrodeposition nanostructuring process an effective tool to improve the overall properties of the Cu-Ni system.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Influence of the shot-peening intensity on the structure and near-surface mechanical properties of Ti40Zr10Cu38Pd12 bulk metallic glass

  • González, Sergio
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Pellicer, Eva|||0000-0002-8901-0998
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Greer, A. L.
  • Belzunce, F. J.
  • Sort, Jordi|||0000-0003-1213-3639
Shot-peening (SP) changes the near-surface structure and mechanical properties of a Ti40Zr10 Cu 38Pd12 bulk metallic glass. Near the surface, the hardness, Young's modulus, and elastic strain limit are all reduced. Measurements of the heat of relaxation show that an exceptionally high stored energy of cold work can be induced, implying a large increase in free volume. At the highest SP intensity there is partial nanocrystallization enabled by the increased free volume and not by the increase in temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Drastic influence of minor Fe or Co additions on the glass forming ability, martensitic transformations and mechanical properties of shape memory Zr-Cu-Al bulk metallic glass composites

  • González, Sergio
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Pérez Zubiaur, Pablo|||0000-0002-4218-2573
  • Rossinyol Casals, Emma|||0000-0002-1656-1254
  • Baró, M. D.|||0000-0002-8636-1063
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The microstructure and mechanical properties of Zr48Cu48 - x Al4M x (M ≡ Fe or Co, x = 0, 0.5, 1 at.%) metallic glass (MG) composites are highly dependent on the amount of Fe or Co added as microalloying elements in the parent Zr48Cu48Al4 material. Addition of Fe and Co promotes the transformation from austenite to martensite during the course of nanoindentation or compression experiments, resulting in an enhancement of plasticity. However, the presence of Fe or Co also reduces the glass forming ability, ultimately causing a worsening of the mechanical properties. Owing to the interplay between these two effects, the compressive plasticity for alloys with x = 0.5 (5.5% in Zr48Cu47.5Al4Co0.5 and 6.2% in Zr48Cu47.5Al4Fe0.5) is considerably larger than for Zr48Cu48Al4 or the alloys with x = 1. Slight variations in the Young's modulus (around 5-10%) and significant changes in the yield stress (up to 25%) are also observed depending on the composition. The different microstructural factors that have an influence on the mechanical behavior of these composites are investigated in detail: (i) co-existence of amorphous and crystalline phases in the as-cast state, (ii) nature of the crystalline phases (austenite versus martensite content), and (iii) propensity for the austenite to undergo a mechanically-driven martensitic transformation during plastic deformation. Evidence for intragranular nanotwins likely generated in the course of the austenite-martensite transformation is provided by transmission electron microscopy. Our results reveal that fine-tuning of the composition of the Zr-Cu-Al-(Fe,Co) system is crucial in order to optimize the mechanical performance of these bulk MG composites, to make them suitable materials for structural applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanomechanical behavior of 3D porous metal-ceramic nanocomposite Bi/Bi2 O3 films

  • Domingo Roca, Roger|||0000-0002-0557-5431
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Pellicer, Eva|||0000-0002-8901-0998
  • Baró, M. D.|||0000-0002-8636-1063
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Sort, Jordi|||0000-0003-1213-3639
The nanomechanical properties of three-dimensional (3D) porous metal/metal oxide composite (Bi/Bi2O3) films grown by direct current electrodeposition have been studied by nanoindentation at two different loading rates. The synthesized films exhibit a mixture of crystallographic phases of metallic Bi and α-Bi2O3, as evidenced by X-ray diffraction. An in-situ compaction of the sample during the nanoindentation assays has been observed. This in-situ compaction has an influence over both the hardness and elastic modulus of the material, being more important on the latter and, therefore, on the determination of the degree of porosity of the composite film. The influence of the loading rate on the mechanical properties has been investigated. In addition, time-dependent deformation processes (creep tests) have been also performed, revealing an anelastic behavior irrespective of the loading rate. From these creep tests, a viscoelastic non-Newtonian behavior of the sample is evidenced, which is well-described by a three-element Voigt model.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Origin of the large dispersion of magnetic properties in nanostructured oxides: FexO/Fe3O4 nanoparticles as a case study

  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • López-Ortega, Alberto|||0000-0003-3440-4444
  • Golosovsky, I. V.
  • Estrade, Sonia|||0000-0002-3340-877X
  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • López-Conesa, Lluís
  • Tobia, Dina
  • Winkler, Elin
  • Ardisson, José D.
  • Macedo, Waldemar A. A.
  • Morphis, Andreas
  • Vasilakaki, Marianna
  • Trohidou, Kalliopi N.
  • Gukasov, Arsen|||0000-0003-2763-468X
  • Mirebeau, Isabelle
  • Makarova, O. L.
  • Zysler, Roberto D.
  • Peiro, Francesca|||0000-0002-5697-0554
  • Baró, M. D.|||0000-0002-8636-1063
  • Bergström, Lennart
  • Nogués, Josep|||0000-0003-4616-1371
The intimate relationship in transition-metal oxides between stoichiometry and physiochemical properties makes them appealing as tunable materials. These features become exacerbated when dealing with nanostructures. However, due to the complexity of nanoscale materials, establishing a distinct relationship between structure-morphology and functionalities is often complicated. In this regard, in the FexO/Fe3O4 system a largely unexplained broad dispersion of magnetic properties has been observed. Here we show, thanks to a comprehensive multi-technique approach, a clear correlation between magneto-structural properties in large (45 nm) and small (9 nm) FexO/Fe3O4 core/shell nanoparticles that can explain the spread of magnetic behaviors. The results reveal that while the FexO core in the large nanoparticles is antiferromagnetic and has bulk-like stoichiometry and unit-cell parameters, the FexO core in the small particles is highly non-stoichiometric and strained, displaying no significant antiferromagnetism. These results highlight the importance of ample characterization to fully understand the properties of nanostructured metal oxides.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Structurally and mechanically tunable molybdenum oxide films and patterned submicrometer structures by electrodeposition

  • Quintana, Alberto|||0000-0002-9813-735X
  • Varea Espelt, Aïda
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
1.5 μm-thick molybdenum oxide films have been electrodeposited potentiostatically from 0.2 M Na₂MoO₄ electrolyte onto indium tin oxide (ITO)/glass substrates at pH = 1, 6 and 9. The influence of cetyltrimethylammonium bromide (CTAB) surfactant on films' adhesion, morphology, degree of porosity, molybdenum speciation, and crystallographic structure has been systematically investigated. The addition of CTAB (0.01 M) to the bath clearly improves film adherence to the substrate, reduces cracking, and increases crystallinity. This has an impact on the physical properties of the films. In particular, both hardness (H) and Young's modulus (E) increase, as determined from nanoindentation tests. The growth of ordered arrays of molybdenum oxide submicrometer structures, including pillars and stripes, by electrodeposition onto e-beam lithographed Au/Ti/Si substrates is also reported.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanostructured Ti-Zr-Pd-Si-(Nb) bulk metallic composites, novel biocompatible materials with superior mechanical strength and elastic recovery

  • Hynowska, Anna
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Pellicer, Eva|||0000-0002-8901-0998
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Gebert, A.
  • Calin, Mariana
  • Eckert, Jürgen|||0000-0003-4112-3181
  • Nogués, Carme|||0000-0002-6361-8559
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Barrios, Leonardo|||0000-0002-6151-8503
  • Sort, Jordi|||0000-0003-1213-3639
The microstructure, mechanical behaviour, and biocompatibility (cell culture, morphology, and cell adhesion) of nanostructured Ti45 Zr15 Pd35- x Si5 Nbx with x = 0, 5 (at. %) alloys, synthesized by arc melting and subsequent Cu mould suction casting, in the form of rods with 3 mm in diameter, are investigated. Both Ti-Zr-Pd-Si-(Nb) materials show a multi-phase (composite-like) microstructure. The main phase is cubic β-Ti phase (Im3m) but hexagonal α-Ti (P63/mmc), cubic TiPd (Pm3m), cubic PdZr (Fm3m), and hexagonal (Ti, Zr)5 Si3 (P63/mmc) phases are also present. Nanoindentation experiments show that the Ti45 Zr15 Pd30 Si5 Nb5 sample exhibits lower Young's modulus than Ti45 Zr15 Pd35 Si5 . Conversely, Ti45 Zr15 Pd35 Si5 is mechanically harder. Actually, both alloys exhibit larger values of hardness when compared with commercial Ti-40Nb, (HTi-Zr-Pd-Si ≈ 14 GPa, HTi-Zr-Pd-Si-Nb ≈ 10 GPa and HTi-40Nb ≈ 2.7 GPa). Concerning the biological behaviour, preliminary results of cell viability performed on several Ti-Zr-Pd-Si-(Nb) discs indicate that the number of live cells is superior to 94% in both cases. The studied Ti-Zr-Pd-Si-(Nb) bulk metallic system is thus interesting for biomedical applications because of the outstanding mechanical properties (relatively low Young's modulus combined with large hardness), together with the excellent biocompatibility.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Designing new biocompatible glass-forming Ti₇₅ˍₓ Zr₁₀ Nbₓ Si₁₅ (x = 0, 15) alloys, corrosion, passivity, and apatite formation

  • Abdi, Somayeh
  • Oswald, Steffen
  • Gostin, Petre Flaviu
  • Helth, Arne
  • Sort, Jordi|||0000-0003-1213-3639
  • Baró, M. D.|||0000-0002-8636-1063
  • Calin, Mariana
  • Schultz, Ludwig
  • Eckert, Jürgen|||0000-0003-4112-3181
  • Gebert, Annett|||0000-0003-2748-3850
Glass-forming Ti-based alloys are considered as potential new materials for implant applications. Ti75-xZr10NbxSi15 alloys (free cytotoxic elements) can be produced as melt-spun ribbons with glassy matrix and embedded single β-type macrocrystals. The corrosion and passivation behavior of these alloys in their homogenized melt-spun states have been investigated in Ringer solution at 37º C in comparison to their cast multiphase crystalline counterparts and to cp-Ti and β-type Ti-40Nb. All tested materials showed very low corrosion rates as expressed in corrosion current densities i corr <50nA/cm2. Electrochemical and surface analytical studies revealed a high stability of the new alloys passive states in a wide potential range. This corresponds to low passive current densities. . .
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ni-, Pt- and (Ni/Pt)-doped TiO₂ nanophotocatalysts, a smart approach for sustainable degradation of Rhodamine B dye

  • Pol, Roberto|||0000-0002-4387-4061
  • Guerrero, Miguel|||0000-0001-8350-8261
  • García-Lecina, Eva|||0000-0001-8915-840X
  • Altube, Ainhoa
  • Rossinyol Casals, Emma|||0000-0002-1656-1254
  • Garroni, Sebastiano|||0000-0001-7686-6589
  • Baró, M. D.|||0000-0002-8636-1063
  • Pons Picart, Josefina|||0000-0003-1834-9326
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Ni (1 wt%)-, Pt (1 wt%)- and [Ni (0.5 wt%)/Pt (0.5 wt%)]-doped TiO₂ nanoporous catalysts have been successfully obtained through a facile two-step hydrothermal route. TiO₂ crystallizes mostly in the anatase phase and acts as a mesoporous matrix. Meanwhile, Ni, Pt and Ni/Pt dopants form small nanoparticles (NPs) (3-95 nm in diameter) which are hosted by the TiO₂ framework. The resulting composites exhibit a rather large surface area, in the range of 186-200 m2/g. The band gap energy reduces from 3.03 eV for the undoped TiO₂ to 2.15 eV for the Pt-loaded TiO₂. As a consequence, absorption expands toward the visible light range. The photodegradation of Rhodamine B dye in aqueous medium has been investigated under UV-vis light irradiation. The presence of Ni, Pt and Ni/Pt NPs significantly enhances the photocatalytic activity of the material. Furthermore, the Ni-doped TiO₂ shows ferromagnetic behavior at room temperature, which makes its recovery and subsequent fast reutilization possible. Interestingly, this sample also exhibits the best stability upon recycling. Considering all the current challenges in sustainable water remediation, these new photocatalysts could find applications in real environmental contexts in the near future.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Improvement to the Corrosion Resistance of Ti-Based Implants Using Hydrothermally Synthesized Nanostructured Anatase Coatings

  • Lorenzetti, Martina
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Baró, M. D.|||0000-0002-8636-1063
  • Kovač, Janez
  • Novak, Saša
  • Kobe, Spomenka
The electrochemical behavior of polycrystalline TiO2 anatase coatings prepared by a one-step hydrothermal synthesis on commercially pure (CP) Ti grade 2 and a Ti13Nb13Zr alloy for bone implants was investigated in Hank's solution at 37.5 °C. The aim was to verify to what extent the in-situ-grown anatase improved the behavior of the substrate in comparison to the bare substrates. Tafel-plot extrapolations from the potentiodynamic curves revealed a substantial improvement in the corrosion potentials for the anatase coatings. Moreover, the coatings grown on titanium also exhibited lower corrosion-current densities, indicating a longer survival of the implant. The results were explained by considering the effects of crystal morphology, coating thickness and porosity. Evidence for the existing porosity was obtained from corrosion and nano-indentation tests. The overall results indicated that the hydrothermally prepared anatase coatings, with the appropriate morphology and surface properties, have attractive prospects for use in medical devices, since better corrosion protection of the implant can be expected.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Novel Ti-Zr-Hf-Fe Nanostructured Alloy for Biomedical Applications

  • Hynowska, Anna
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Pellicer, Eva|||0000-0002-8901-0998
  • Fornell Beringues, Jordina|||0000-0002-0909-3843
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • González, Sergio
  • Ibáñez, Elena|||0000-0002-0275-6958
  • Barrios, Leonardo|||0000-0002-6151-8503
  • Nogués, Carme|||0000-0002-6361-8559
  • Sort, Jordi|||0000-0003-1213-3639
The synthesis and characterization of Ti40Zr20Hf20Fe20 (atom %) alloy, in the form of rods ( = 2 mm), prepared by arc-melting, and subsequent Cu mold suction casting, is presented. The microstructure, mechanical and corrosion properties, as well as in vitro biocompatibility of this alloy, are investigated. This material consists of a mixture of several nanocrystalline phases. It exhibits excellent mechanical behavior, dominated by high strength and relatively low Young's modulus, and also good corrosion resistance, as evidenced by the passive behavior in a wide potential window and the low corrosion current densities values. In terms of biocompatibility, this alloy is not cytotoxic and preosteoblast cells can easily adhere onto its surface and differentiate into osteoblasts.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Composite films combining electrospun fiber network and epitaxial oxide by chemical solution deposition

  • Calleja, Ana
  • Sort, Jordi|||0000-0003-1213-3639
  • Ricart, Susana|||0000-0003-4196-2081
  • Granados García, Xavier
  • Palmer, Xavier
  • Vlad, Valentina Roxana
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
We report the preparation of a novel type of composites films by chemical solution deposition. It consists of an epitaxial oxide on a single crystal template inside which an oxide fiber network is dispersed. Electrospinning is used for the deposition of the fiber network whereas the continuous epitaxial phase is spin-coated. Good coating is observed between the liquid precursor of the continuous oxide and the fibers and remarkably, epitaxial (001) growth of the YBa2Cu3O7-x is not affected by the presence of the fiber network because both oxides do not react to each other. Topological continuity of the continuous phase is probed by electrical conductivity measurements, rendering nearly the same values reported for fiber-free films. Mechanical properties are determined by nanoindentation at low penetration depths to avoid the effect of the single crystal beneath the composite. Enhanced mechanical properties are found (hardness, Young's modulus, elastic recovery and wear resistance).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

New binuclear copper(ii) coordination polymer based on mixed pyrazolic and oxalate ligands, Structural characterization and mechanical properties

  • López Marzo, Adaris María|||0000-0001-8552-8637
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Calvet, Teresa|||0000-0002-4058-7171
  • Font-Bardia, Mercè|||0000-0002-7892-8744
  • Pellicer, Eva|||0000-0002-8901-0998
  • Baró, M. D.|||0000-0002-8636-1063
  • Pons Picart, Josefina|||0000-0003-1834-9326
  • Sort, Jordi|||0000-0003-1213-3639
A new inorganic-organic coordination polymer based on a copper(ii) binuclear complex coordinated with pyrazole (L1), 1-(hydroxymethyl)pyrazole) (L2) and oxalate (Ox) ligands has been unexpectedly obtained. The crystal structure of this coordination polymer has been unequivocally determined from single crystal X-ray diffraction. One copper(ii) center (Cu1) is four-coordinated with two nitrogens (N2, L1 and N3, L2), one oxygen (O1, L1) and one chlorine atom, while the other copper(ii) nucleus (Cu2) is five-coordinated with one nitrogen (N1, L1), three oxygens (O1, L2; O2 and O3, Ox) and one chlorine atom, giving slightly distorted square-planar and square-pyramidal geometries, respectively. To the best of our knowledge, such coordination environments have never been previously observed to coexist in the same structure. The terminal chlorine (Cl1) forms the connecting bridge between the planar binuclear [CuCl(Ox)(L1)(L2)] units ending in an attractive structural framework. An extended layered structure staggered along the b-axis is observed in the supramolecular view. Nanoindentation experiments were carried out and relevant mechanical parameters such as hardness, Young's modulus, indentation energies and elastic recovery were determined. Additionally, a comparative analysis between the supramolecular structure and the mechanical properties is reported.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A combinatorial study of the mechanical and magnetic properties of a gradually nitrided austenitic stainless steel single crystal

  • Menéndez, Enric|||0000-0003-3809-2863
  • Templier, C.
  • Abrasonis, G.
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Nogués, Josep|||0000-0003-4616-1371
  • Temst, Kristiaan
  • Sort, Jordi|||0000-0003-1213-3639
The mechanical and magnetic properties of a nitrided austenitic stainless steel are studied using a combinatorial approach. Plasma nitriding of a [100]-oriented 316L single crystal is carried out using a loose shadow mask to produce an in-plane lateral gradient of nitrogen concentration that extends up to 100 μm. The local mechanical and magnetic properties across the gradually nitrided area are resolved by nanoindentation and the polar magneto-optic Kerr effect, respectively. The hardness, reduced Young's modulus and remanence qualitatively depict the nitrogen profile, suggesting that the nitrogen concentration is a central effect for these observed dependencies. Conversely, the coercivity exhibits a non-monotonic behaviour due to the interplay between magnetic anisotropy and the strength of the induced ferromagnetism. Fingerprints of the expected transition from a nitrogen supersaturated solid solution to a multiphase nature of expanded austenite are evidenced along the gradually nitrided area. © 2014 the Partner Organisations.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

One-pot electrosynthesis of multi-layered magnetic metallopolymer nanocomposites

  • Özkale, Berna|||0000-0002-3016-9363
  • Pellicer, Eva|||0000-0002-8901-0998
  • Zeeshan, M. Arif
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Nogués, Josep|||0000-0003-4616-1371
  • Sort, Jordi|||0000-0003-1213-3639
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Researchers have been investigating various methodologies for fabricating well-defined, homogenous composites consisting of nanoparticles (NPs) dispersed in a matrix. The main challenges are to prevent particle agglomerations during fabrication and to obtain nanoparticles whose size distribution could be tuned on demand. One of the methods that can provide these features is electrodeposition. We report for the first time the fabrication of a thin magnetic multilayer nanocomposite film by electrodeposition from one bath containing both a monomer and metal salts. Cobalt and cobalt-nickel NPs were deposited on conductive polymer polypyrrole thin films using different electrodeposition potentials and times. Multilayer nanocomposite films were fabricated by subsequent electrodeposition of polymer and nanoparticle layers. Scanning electron microscopy analysis showed that a wide range of NPs (70-230 nm) could be synthesized by manipulating growth potentials and times. The cobalt-nickel NPs were found to contain hexagonal close-packed (hcp) and face-centered cubic (fcc) phases based on X-ray diffraction and selected area electron diffraction. Magnetic measurements proved that both the single and the multi-layered nanocomposites were magnetic at room temperature.