Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and sintering at low temperature of a new nanostructured beta- Eucryptite dense compact by spark plasma sintering

  • Suárez, M.
  • Fernández, A.
  • Díaz, L.A.
  • Sobrados, I.
  • Sanz, J.
  • Palomares, F.J.
  • Torrecillas, R.
  • Moya, J.S.
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] The solid state reaction between kaolin and Li2CO3 with a 1:1 M composition has been studied in the temperature range 380 degrees C-550 degrees C. The role played by Li2CO3 (basic medium) in the thermal transformation of the kaolin has been investigated by X-Ray diffraction, FESEM, TEM, MAS-NMR and XPS techniques. For the first time, a nanostructured high density beta-Eucryptite ( < 10 nm) has been obtained by Spark Plasma Sintering (SPS) at 550 degrees C in high vacuum. The atmosphere used in sintering treatments has a determinant role in lithium migration and crystallization of beta-Eucryptite. In the case of low vacuum treatments, an amorphous LiAlSiO4 geopolymer type material was obtained. Due to exclusive properties and performances of beta-Eucryptite based materials, the results reported in the present investigation open new perspectives for new nanostructured and amorphous functional materials with null thermal expansion, ionic conduction and remarkable mechanical properties., The authors acknowledge the Principado de Asturias (Spain) for funding through the projects GRUPIN IDI/2018/000232 and MAT201678362-C4-2. A. Borrell acknowledges the Spanish Ministry of Economy and Competitiveness for her RyC contract (RYC-2016-209.15).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Preparation and Characterization of Large Area Li-NASICON Electrolyte Thick Films

  • Jiménez, Ricardo
  • Sobrados, Isabel
  • Martínez-Chaparro, Sandra
  • Campo, Ángel Adolfo del
  • Calzada, M. L.
  • Sanz Lázaro, Jesús
  • Tsai, Shu Yi
  • Lin, Ming Rui
  • Fung, Kuan Zong
  • Kazakevicius, Edvardas
  • Kežionis, Algimantas
The preparation of solid electrolyte ceramic membranes is the object of intense study for its fundamental parts in the development of all solid-state batteries and improved battery separators. In this work, the procurement of large area solid electrolyte ceramic thick film membranes of the Li-NASICON Li1.3Al0.3Ti1.7(PO4)3 (LATP) composition is attempted. Through the use of LATP powders from a sol–gel reaction, a slurry is formulated and tape casted. The green tapes are sintered using two sintering times. In both cases, ceramic thick films of a 5.5 × 5.5 cm2 area and ≈250 µm average thickness were obtained. The characterization indicated almost pure phase samples with a bi-modal microstructure composed of large and smaller grains, being larger for longer sintering time. The samples are porous and brittle, presenting very high “bulk” conductivity but lower total direct current (DC) one, as compared with the commercial Li-NASICON (OHARA) thick films with a similar area. The larger the grains, the poorer the total conductivity and the mechanical properties of the thick-films. The formation of poorly adhering grain boundaries as the grain size grows is responsible for the worsened properties. A better control of the microstructure is mandatory., This research was funded by the Spanish Ministry of Science, Innovation, and Universities, PCIN-2017-110, in the frame of the M-Era-net 2016 program, by a grant (S-M-ERA.NET-17-1) from the Research Council of Lithuania, and by the project MOST 106-2923-M-006-002-MY3. Project MAT2016-78362-C4-2R is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Li conductivity in Li1+xTi2-xAlx(PO4)3 (0.3≤ x≤ 0.7) ceramics prepared from sol-gel precursors

  • Jiménez, Ricardo
  • Sobrados, Isabel
  • Martínez-Chaparro, Sandra
  • Criado Sanz, María
  • Perea, Gracia Belén
  • Sanz, Jesús
LiTiAl (PO) (LTAP) x = 0.3, 0.4, 0.5 and 0.7) compounds, prepared at 800 °C by sol-gel, have been studied by X-ray diffraction, Nuclear Magnetic Resonance, Scanning Electron Microscopy and Impedance Spectroscopy. The increment of lithium enhances Li–Li repulsions, favoring the creation of vacancies at the conduction paths intersection (M1 sites), increasing Li mobility along (… M1-M2-M1 …) channels in NASICON phases. The partial elimination of segregated AlPO, LiAlPO and LiTiPO phases increased Ti, Al solubility in NASICON, improving overall conductivity in ceramics prepared at 950 °C. The maximum of “bulk” conductivity was produced in x = 0.4 sample, as a consequence of the creation of M1 vacancies and allocation of Li in M2 cavities with optimal Li/vacancy distribution. The presence of secondary phases increased grain boundary impedance, shifting maximum of overall conductivity to x = 0.3 compound. Obtained results are compared with those reported previously in LTPA samples prepared by the ceramic route., This research was funded by Regional and National agencies for financial support: S2013/MIT-2753 project (Comunidad de Madrid), MAT2016-78362-C4-2R and PCIN-2017-110 (M-ERA-net 2016) projects (Education Ministry)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Synthesis and sintering at low temperature of a new nanostructured beta-Eucryptite dense compact by spark plasma sintering

  • Suárez, Marta
  • Fernández, Adolfo
  • Díaz, Luis A.
  • Sobrados, Isabel
  • Sanz Lázaro, Jesús
  • Borrell, Amparo
  • Palomares, F. Javier
  • Torrecillas, Ramón
  • Moya, J. S.
The solid state reaction between kaolin and Li2CO3 with a 1:1 M composition has been studied in the temperature range 380°C-550 °C. The role played by Li2CO3 (basic medium) in the thermal transformation of the kaolin has been investigated by X-Ray diffraction, FESEM, TEM, MAS-NMR and XPS techniques. For the first time, a nanostructured high density β- Eucryptite (<10 nm) has been obtained by Spark Plasma Sintering (SPS) at 550 °C in high vacuum. The atmosphere used in sintering treatments has a determinant role in lithium migration and crystallization of β- Eucryptite. In the case of low vacuum treatments, an amorphous LiAlSiO4 geopolymer type material was obtained. Due to exclusive properties and performances of β- Eucryptite based materials, the results reported in the present investigation open new perspectives for new nanostructured and amorphous functional materials with null thermal expansion, ionic conduction and remarkable mechanical properties., The authors acknowledge the Principado de Asturias (Spain) for funding through the projects GRUPIN IDI/2018/000232 and MAT2016-78362-C4-2. A. Borrell acknowledges the Spanish Ministry of Economy and Competitiveness for her RyC contract (RYC-2016-209.15)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Polysiloxane hybrids via sol-gel process: Effect of temperature on network formation

  • Criado Sanz, María
  • Sobrados, Isabel
  • Sanz, Jesús
This article belongs to the Special Issue Thin and Thick Films: Deposition, Characterization and Applications., The effect of temperature on the network formation of polysiloxane hybrids was evaluated since this type of material is currently in high demand. In the last decades, the deposition of these coatings on different substrates, mostly metals, has demonstrated anticorrosion properties. Sol-gel hybrids were prepared by mixing 3-methacryloxypropyltrimethoxysilane (MPTS) and tetramethyl orthosilicate (TMOS) with a molar ratio of 1. The formation, thickness and composition of these hybrid materials were evaluated by nuclear magnetic resonance (NMR) spectroscopy and scanning electron microscopy (SEM), respectively. The results showed that the temperature plays an important role in the network formation, the total condensation degree and the total dimensionality of the hybrid materials. At room temperature, the polysiloxane hybrids presented total condensation degrees lower than 75% and a total dimensionality (dtotal) = 2.5, while those obtained at 65 °C presented total condensation degrees higher than 80% and a dtotal = 2.8. The ideal conditions to prepare polysiloxane hybrids are 65 °C for 4 h, where this shows a higher atomic percentage of Si and a greater thickness., This research received external funding from Project MAT2016-78362-C4-2-R financed by MICINN, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced “overall” ionic conductivity in Li1+xAlxTi2−x(PO4)3 (0.3 ≤ x ≤ 0.7) ceramics prepared from sol-gel powders by spark plasma sintering

  • Martínez-Chaparro, Sandra
  • Kobylianska, Sofia D.
  • Sobrados, Isabel
  • Jiménez, Ricardo
  • Sanz, Jesús M.
The Li1+xAlxTi2−x(PO4)3 (LATPx) series displays the highest “bulk” reported conductivity, but a much lower “overall” contribution, that changes with the powder preparation and sintering conditions. In this work, the preparation of LATPx ceramics is discussed, by using the sol-gel technique for powders synthesis and mild spark plasma (SPS) for ceramics sintering at 800 °C. An “overall” conductivity ~ 2.10−3 Ω−1 cm−1 was obtained for the x = 0.4 composition, that was the result of a high “bulk” conductivity, an optimized microstructure and almost full density, in absence of micro-cracks, with a small content of secondary phases and clean grain boundaries. Fast-ion ceramics prepared by SPS are good candidates for solid electrolytes in all solid state batteries (ASSB)., This research was funded by Regional and National agencies: S2013/MIT-2753 project (Comunidad de Madrid), MAT2016-78362-C4-2R, PCIN-2017-110 (M-ERA-net 2016) and PID2019-106662RB-C42 projects (Education Ministry)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the preparation temperature on the photocatalytic activity of 3d-ordered macroporous anatase formed with an opal polymer template

  • Torralvo Fernandez, Maria José
  • Enciso, Eduardo
  • Martinez, Sandra
  • Sobrados, Isabel
  • Sanz, Jesús M.
  • Tonti, Dino
  • Soria, Javier
  • Yurdakal, Sedat
  • Palmisano, Giovanni
  • Augugliaro, Vincenzo
Even if many aspects of three-dimensionally ordered macroporous (3DOM) titania have been extensively studied, the interplay between the amorphous and crystalline components of their skeleton wall has not attracted too much attention, although it should strongly influence the properties of these materials. In order to gain new insight on this interplay, we have studied in detail the wall structure of three 3DOM titania samples prepared by heating the 3DOM titania precursor at 673, 773, and 873 K by X-ray diffraction, thermogravimetric analysis, differential thermal analysis, N<inf>2</inf> adsorption/desorption, pore-size distribution, high-resolution transmission electron microscopy, and <sup>1</sup>H magic-angle-spinning NMR. In addition, their photoreactivity toward the partial oxidation and mineralization of 4-methoxybenzyl alcohol was determined and compared with that of commercial anatase and P25 samples. The results show that when the 3DOM sample heated at 673 K, whose skeleton wall is formed by very small anatase nanoparticles covered by relatively thick layers of amorphous titania, is heated at 773 K, most amorphous titania is eliminated, leaving a very thin amorphous titania layer covering the slightly grown anatase nanoparticles. The photoreactivity results show that the sample heated at 773 K has the highest overall photoreactivity, which was lower than those of commercial anatase and P25 samples; however, its reactivity toward the alcohol partial oxidation was the highest compared with those obtained with all of the other samples. These results indicate that amorphous titania negatively affects the overall photocatalytic activity; however, its particular distribution in the 3DOM samples enhances the partial oxidation reaction., J.Sa. and D.T. thank the Spanish Agency MINECO (Project MAT2016-78362-C4-2R) and the regional Government (Project S2013/MIT-2753) for financial support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2015-0496), Peer reviewed