Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Magnetization process of a ferromagnetic nanostrip under the influence of a surface acoustic wave

  • Castilla, David
  • Yanes, Rocío
  • Fuentes, Gonzalo
  • Grandal, Javier
  • Maicas, Marco
  • Álvarez-Arenas, Tomás E. G.
  • Muñoz, Manuel
  • Torres, Luis
  • López, Luis
  • Prieto, José L.
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
[EN] Surface Acoustic Waves (SAW) are one of the possible solutions to target the challenges faced by modern spintronic devices. The stress carried by the SAW can decrease the current required to achieve magnetic switching or domain wall movement by spin transfer torque. Although the last decade has produced very relevant results in this field, it is still important to study the effects of a SAW on the basic unit of many spintronic devices, a ferromagnetic nanostrip. In this work, we perform a complete set of measurements and simulations to characterize the magnetization process of a Ni nanostrip under the influence of a SAW. We find that the SAW increases the mobility and the depinning ability of the magnetic domain walls and consequently, promotes a sharper approach to saturation and substantially decreases coercivity. We have also found other two interesting effects. When the SAW has sufficient energy, is able to trigger irreversible transitions even before switching the direction of the external magnetic field. Additionally, we have found that the magnetization process depends on the direction of the travelling SAW., We acknowledge the support from projects MAT2017-87072-C4-1-P, MAT2017-87072-C4-4-P and MAT2017- 87072-C4-3-P from the Spanish government and project SA299P18 from the Junta de Castilla y Leon.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Bi-doped Cu thin films with large spin-mixing conductance

  • Ruiz-Gómez, Sandra
  • Serrano Rubio, Aída
  • Guerrero, Rubén
  • Muñoz Sánchez, Manuel
  • Lucas, Irene
  • Foerster, Michael
  • Aballe, Lucía
  • Marco, J.F.
  • Amado, Mario
  • McKenzie-Sell, Lauren
  • Bernardo, Angelo di
  • Robinson, Jason W. A.
  • González-Barrio, M. A.
  • Mascaraque, Arantzazu
  • Pérez, Lucas
The spin Hall effect (SHE) provides an efficient tool for the production of pure spin currents, essentially for the next generation of spintronics devices. Giant SHE has been reported in Cu doped with 0.5% Bi grown by sputtering, and larger values are predicted for larger Bi doping. In this work, we demonstrate the possibility of doping Cu with up to 10% of Bi atoms without evidence of Bi surface segregation or cluster formation. In addition, YIG/BiCu structures have been grown, showing a spin mixing conductance larger that the one shown by similar Pt/YIG structures, reflecting the potentiality of these new materials., This work has been partially funded by MAT2014-52477-C5, MAT2017-87072-C4, and MAT2015-64110-C2-2-P from the Ministerio de Ciencia e Innovacion and Nanofrontmag from ´ Comunidad de Madrid. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, Grant No. SEV-2016-0686)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Deterministic and time resolved thermo-magnetic switching in a nickel nanowire

  • Proenca, M. P.
  • Muñoz, Montserrat
  • Villaverde, I.
  • Migliorini, Andrea
  • Raposo, Victor
  • Lopez-Diaz, L.
  • Martínez, Eduardo
  • Prieto, J. L.
Heating a ferromagnetic material is often perceived as detrimental for most applications. This is indeed the case for modern nano-scaled spintronic devices which are operated solely (at least ideally) by an electric current. Heat is a by-product of the current-driven operation and it deteriorates many functionalities of the device. A large scientific and technological effort is devoted these days to avoid heat in modern magnetic nano devices. Here we show that heat can be used to provide an additional and useful degree of freedom in the control of the local magnetization at the nanoscale. In a ferromagnetic nanowire, temperature is used to induce a magnetic switching through a perfectly deterministic mechanism. The nucleation of the magnetic domain walls that triggers the switching can be achieved at a field considerably smaller than the nucleation field and, importantly, the exact moment of the magnetic switching can be pre-determined with nanosecond precision by controlling the power delivered locally to the switching area. With the help of micromagnetic simulations and a theoretical model, we provide an accurate explanation of how this deterministic thermo-magnetic switching operates. The concepts described in this work may lead to an increased functionality in magnetic nano-devices based on magnetic domain walls., We acknowledge the support from projects MAT2017-87072-C4-1-P,MAT2017-87072-C4-4-P and MAT2017- 87072-C4-3-P from the Spanish government, project SA299P18 from the Junta de Castilla y Leon, and from project POCI-01-0145-FEDER-028676 from Portuguese FCT and COMPETE 2020 (FEDER).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring magnetic anisotropy at will in 3D interconnected nanowire networks

  • Ruiz-Clavijo, Alejandra
  • Ruiz-Gómez, Sandra
  • Caballero-Calero, Olga
  • Pérez, Lucas
  • Martín-González, Marisol
The authors acknowledge financial support from INFANTE 201550E072, MAT2017‐86450‐C4‐3‐R, and MAT2017‐87072‐C4‐2‐P. The authors also acknowledge the service from the X‐SEM Laboratory at IMM, and funding from MINECO under project CSIC13‐4E‐1794 with support from EU (FEDER, FSE) and project MAT2017‐87072‐C4‐2‐P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

3D magnetometry in nanomaterials using XMCD-PEEM microscopy

  • Ruiz-Gómez, Sandra
  • Quesada, Adrián
  • Foerster, Michael
  • Aballe, Lucía
  • Mascaraque, Arantzazu
  • de la Figuera, Juan
  • Pérez, Lucas
ICFPM19, Gijón, Spain, 26th to 31st May 2019. -- https://icfpm2019.org/, This work is supported by the Agencia Estatal de Investigación through Projects MAT2014-52477-C5, MAT2015-64110-C2 and MAT2017-87072-C4-2-P and by Comunidad de Madrid through the NanomagCOST-CM program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In-plane Néel wall chirality and orientation of interfacial Dzyaloshinskii-Moriya vector in magnetic films

  • Robertson, M.
  • Agostino, C.J.
  • Chen, Gong
  • Kang, S.P.
  • Mascaraque, Arantzazu
  • Garcia Michel, E.
  • Won, C.
  • Wu, Y.
  • Schmid, Andreas K.
  • Liu, K.
6 pags., 5 figs., The interfacial Dzyaloshinskii-Moriya interaction (DMI) is of great interest as it can stabilize chiral spin structures in thin films. Experiments verifying the orientation of the interfacial DMI vector remain rare, in part due to the difficulty of separating vector components of DMI. In this study, Fe/Ni bilayers and Co/Ni multilayers were deposited epitaxially onto Cu(001) and Pt(111) substrates, respectively. By tailoring the effective anisotropy, spin reorientation transitions (SRTs) are employed to probe the orientation of the DMI vector by measuring the spin structure of domain walls on both sides of the SRTs. The interfacial DMI is found to be sufficiently strong to stabilize chiral Néel walls in the out-of-plane magnetized regimes, while achiral Néel walls are observed in the in-plane magnetized regimes. These findings experimentally confirm that the out-of-plane component of the DMI vector is insignificant in these fcc(001) and fcc(111) oriented interfaces, even in the presence of atomic steps., This work has been supported by the NSF (Grants No. DMR-1610060 and No. DMR-1905468) and the UC Office of the President Multicampus Research Programs and Initiatives (Grant No. MRP-17-454963). Work at the Molecular Foundry was supported by the Office of Science, Office of Basic Energy Sciences, of the US Department of Energy under Contract No. DE-AC02-05CH11231. Work at GU has been supported in part by SMART (Grant No. 2018-NE-2861), one of seven centers of nCORE, a Semiconductor Research Corporation program, sponsored by National Institute of Standards and Technology (NIST). Work at the Kyung Hee University been supported by the National Research Foundation of Korea funded by the Korean Government (Grant No. NRF-2018R1D1A1B07047114). A.M. acknowledges support from the MINECO under the Project No. MAT2017-87072- C4-2-P and from Comunidad de Madrid under the Project No. S2018/NMT4321. E.G.M acknowledges support from MICINN (Spain) under Grant No. FIS2017-82415-R and from MECD (Spain) under Grant No. PRX17/00557. Y.W. acknowledges support from National Natural Science Foundation of China (Grants No. 11974079 and No. 11734006).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Helical surface magnetization in nanowires: The role of chirality

  • Ruiz-Gómez, Sandra
  • Fernández-González, C.
  • Martínez, E.
  • Raposo, V.
  • Sorrentino, A.
  • Foerster, M.
  • Aballe, Lucía
  • Mascaraque, Arantzazu
  • Ferrer, Salvador
  • Pérez, Lucas
6 pags., 3 figs., Nanomagnetism is nowadays expanding into three dimensions, triggered by the discovery of new magnetic phenomena and their potential use in applications. This shift towards 3D structures should be accompanied by strategies and methodologies to map the tridimensional spin textures associated. We present here a combination of dichroic X-ray transmission microscopy at different angles and micromagnetic simulations allowing to determine the magnetic configuration of cylindrical nanowires. We have applied it to permalloy nanowires with equispaced chemical barriers that can act as pinning sites for domain walls. The magnetization at the core is longitudinal and generates at the surface of the wire helical magnetization. Different types of domain walls are found at the pinning sites, which respond differently to applied fields depending on the relative chirality of the adjacent domains., This work is supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through projects MAT2017- 87072-C4-1-P, MAT2017-87072-C4-2-P and RTI2018-095303- B-C53, the Comunidad de Madrid through Project NANOMAGCOST-CM P2018/NMT-4321 and by Consejería de Educación of Castilla y León through project SA299P18. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). SRG acknowledges MINECO for FPI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large Dzyaloshinskii-Moriya interaction induced by chemisorbed oxygen on a ferromagnet surface

  • Chen, Gong
  • Mascaraque, Arantzazu
  • Jia, H.
  • Zimmermann, B.
  • Robertson, M.
  • Lo Conte, Roberto
  • Hoffmann, Martin
  • González Barrio, Miguel Ángel
  • Ding, H.
  • Wiesendanger, R.
  • Michel, E.G.
  • Blügel, S.
  • Schmid, Andreas K.
  • Liu, K.
7 pags., 4 figs., 3 pags., The Dzyaloshinskii-Moriya interaction (DMI) is an antisymmetric exchange interaction that stabilizes chiral spin textures. It is induced by inversion symmetry breaking in noncentrosymmetric lattices or at interfaces. Recently, interfacial DMI has been found in magnetic layers adjacent to transition metals due to the spin-orbit coupling and at interfaces with graphene due to the Rashba effect. We report direct observation of strong DMI induced by chemisorption of oxygen on a ferromagnetic layer at room temperature. The sign of this DMI and its unexpectedly large magnitude—despite the low atomic number of oxygen—are derived by examining the oxygen coverage–dependent evolution of magnetic chirality. We find that DMI at the oxygen/ ferromagnet interface is comparable to those at ferromagnet/transition metal interfaces; it has enabled direct tailoring of skyrmion’s winding number at room temperature via oxygen chemisorption. This result extends the understanding of the DMI, opening up opportunities for the chemisorption-related design of spin-orbitronic devices., This work has been supported by the NSF (DMR-1610060 and DMR-1905468) and the UC Office of the President Multicampus Research Programs and Initiatives (MRP-17- 454963). Work at the Molecular Foundry was supported by the Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under contract no. DE-AC02- 05CH11231. Work at GU has been supported, in part, by SMART (2018-NE-2861), one of seven centers of nCORE, a Semiconductor Research Corporation program, sponsored by the National Institute of Standards and Technology (NIST). A.M. and M.A.G.B. acknowledge support from MINECO (Spain) under the project no. MAT2017-87072-C4-2-P and from Comunidad de Madrid under the project no. S2018/NMT4321. The Jülich team acknowledges financial support from the DARPA TEE program through grant MIPR (# HR0011831554) from the DOI, the European Union H2020-INFRAEDI-2018-1 program (grant no. 824143, project “MaX— Materials at the exascale”), the Deutsche Forschungsgemeinschaft (DFG) through SPP 2137 “Skyrmionics” (project BL 444/16), the Collaborative Research Centers SFB 1238 (project C01), and computing resources at the supercomputers JURECA at Juelich Supercomputing Centre and JARA-HPC from RWTH Aachen University (projects jias1f and jara0197). R.L.C., A.K.S., and R.W. acknowledge financial support from the European Union via an International Marie Curie Fellowship (grant no. 748006). H.D. acknowledges the support of the National Key R&D Program of China (grant no. 2017YFA0303202) and the National Natural Science Foundation of China (grant nos. 11734006 and 51571109). E.G.M. acknowledges support from MINECO (Spain) under grants MAT2014-52477 and FIS2017-82415-R and from MECD (Spain) under grant PRX17/00557
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

FeCo nanowire−strontium ferrite powder composites for permanent magnets with high-energy products

  • Guzmán-Mínguez, J. C.
  • Ruiz-Gómez, Sandra
  • Vicente-Arche, L. M.
  • Granados-Miralles, Cecilia
  • Fernández-González, Claudia
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Erohkin, S.
  • Berkov, Dmitry
  • Mishra, D.
  • de Julián Fernández, C.
  • Fernández Lozano, José Francisco
  • Pérez, L.
  • Quesada, Adrián
  • AMPHIBIAN Project ID:720853
Due to the issues associated with rare-earth elements, there arises a strong need for magnets with properties between those of ferrites and rare-earth magnets that could substitute the latter in selected applications. Here, we produce a high remanent magnetization composite bonded magnet by mixing FeCo nanowire powders with hexaferrite particles. In the first step, metallic nanowires with diameters between 30 and 100 nm and length of at least 2 μm are fabricated by electrodeposition. The oriented as-synthesized nanowires show remanence ratios above 0.76 and coercivities above 199 kA/m and resist core oxidation up to 300 °C due to the existence of a >8 nm thin oxide passivating shell. In the second step, a composite powder is fabricated by mixing the nanowires with hexaferrite particles. After the optimal nanowire diameter and composite composition are selected, a bonded magnet is produced. The resulting magnet presents a 20% increase in remanence and an enhancement of the energy product of 48% with respect to a pure hexaferrite (strontium ferrite) magnet. These results put nanowire−ferrite composites at the forefront as candidate materials for alternative magnets for substitution of rare earths in applications that operate with moderate magnet performance., We would like to thank Dr. Vić tor Fuertes for his advice on the processing of the bonded magnets. This work is supported by the Spanish Ministerio de Economía y Competitividad y Ministerio de Ciencia e Innovación (Project Nos. MAT2017- 86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110- C2-2-P, MAT2017-87072-C4-2-P, RTI2018-095303-A-C52, and FIS2017-82415-R) and by the European Commission through Project H2020 (No. 720853; AMPHIBIAN). C.G.-M. acknowledges financial support from MICINN through the “Juan de la Cierva” Program (FJC2018-035532-I). A.Q. acknowledges financial support from MICINN through the “Ramón y Cajal” Program (RYC-2017-23320). The work also is funded by the Regional Government of Madrid (Project S2018/ NMT-4321; NANOMAGCOST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetization process of a ferromagnetic nanostrip under the influence of a surface acoustic wave

  • Castilla, David
  • Yanes, Rocío
  • Sinusía, Miguel
  • Fuentes, Gonzalo
  • Grandal, Javier
  • Maicas, Marco
  • Gómez Álvarez-Arenas, Tomás
  • Muñoz, Manuel
  • Torres, Luis
  • López, Luis
  • Prieto, José L.
Surface Acoustic Waves (SAW) are one of the possible solutions to target the challenges faced by modern spintronic devices. The stress carried by the SAW can decrease the current required to achieve magnetic switching or domain wall movement by spin transfer torque. Although the last decade has produced very relevant results in this feld, it is still important to study the efects of a SAW on the basic unit of many spintronic devices, a ferromagnetic nanostrip. In this work, we perform a complete set of measurements and simulations to characterize the magnetization process of a Ni nanostrip under the infuence of a SAW. We fnd that the SAW increases the mobility and the depinning ability of the magnetic domain walls and consequently, promotes a sharper approach to saturation and substantially decreases coercivity. We have also found other two interesting efects. When the SAW has sufcient energy, is able to trigger irreversible transitions even before switching the direction of the external magnetic feld. Additionally, we have found that the magnetization process depends on the direction of the travelling SAW., Projects MAT2017-87072-C4-1-P, MAT2017-87072-C4-4-P and MAT2017- 87072-C4-3-P from the Spanish government and project SA299P18 from the Junta de Castilla y Leon., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Observation of a topologically protected state in a magnetic domain wall stabilized by a ferromagnetic chemical barrier

  • Ruiz-Gómez, Sandra
  • Foerster, Michael
  • Aballe, Lucía
  • Proenca, Mariana P.
  • Lucas, Irene
  • Prieto, J.L.
  • Mascaraque, Arantzazu
  • de la Figuera, Juan
  • Quesada, Adrián
  • Pérez, Lucas
6 pags, 4 figs, The precise control and stabilization of magnetic domain walls is key for the development of the next generation magnetic nano-devices. Among the multitude of magnetic configurations of a magnetic domain wall, topologically protected states are of particular interest due to their intrinsic stability. In this work, using XMCD-PEEM, we have observed a topologically protected magnetic domain wall in a ferromagnetic cylindrical nanowire. Its structure is stabilized by periodic sharp alterations of the chemical composition in the nanowire. The large stability of this topologically protected domain wall contrasts with the mobility of other non-protected and non-chiral states also present in the same nanowire. The micromagnetic simulations show the structure and the conditions required to find the topologically protected state. These results are relevant for the design of future spintronic devices such as domain wall based RF oscillators or magnetic memories., This work is supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects MAT2014-52477-C5-1-P, 2-P, MAT2015-64110-C2-1-P, 2-P and MAT2017-87072-C4-2-P and by Portuguese FCT and COMPETE 2020, under project POCI-01-0145-FEDER-028676. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). MPP acknowledges FCT for grant SFRH/BPD/84948/2012. SRG acknowledges MINECO for FPI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Scaling up the production of electrodeposited nanowires: A roadmap towards applications

  • Fernández-González, Claudia
  • Guzmán-Mínguez, J. C.
  • Guedeja-Marrón, A
  • García-Martín, Eduardo
  • Foerster, Michael
  • Niño, Miguel Ángel
  • Aballe, Lucía
  • Quesada, Adrián
  • Pérez, Lucas
  • Ruiz-Gómez, Sandra
  • AMPHIBIAN Project ID:720853
11 pags., 5 figs., 1 tab. -- This article belongs to the Special Issue Multifunctional Magnetic Nanowires and Nanotubes, The use of metallic nanowires is mostly reduced to scientific areas where a small quantity of nanostructures are needed. In order to broaden the applicability of these nanomaterials, it is necessary to establish novel synthesis protocols that provide a larger amount of nanowires than the conventional laboratory fabrication processes at a more competitive cost. In this work, we propose several modifications to the conventional electrochemical synthesis of nanowires in order to increase the production with considerably reduced production time and cost. To that end, we use a soft anodization procedure of recycled aluminum at room temperature to produce the alumina templates, followed by galvanostatic growth of CoFe nanowires. We studied their morphology, composition and magnetic configuration, and found that their properties are very similar to those obtained by conventional methods., This research was partially funded by the Spanish Agencia Estatal de Investigación through projects MAT2017-87072-C4-2-P and RTI2018-095303-B-C53, by The Ministerio de Ciencia y Universidades through project RTI2018-095303-A-C52, through the Ramón y Cajal Contract RYC2017-23320, The European Commission through the H2020 Project No. 720853 (AMPHIBIAN) and by the Comunidad de Madrid through Project NANOMAGCOST-CM P2018/NMT-4321.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Further progress in the study of epsilon iron oxide in archaeological baked clays

  • López-Sánchez, Jesús
  • Palencia-Ortas, A.
  • Campo, Ángel Adolfo del
  • McIntosh, G.
  • Kovacheva, M.
  • Martín Hernández, Fátima
  • Carmona, N.
  • Rodríguez de la Fuente, Óscar
  • Marín, Pilar
  • Molina‐Cardín, Alberto
  • Osete, María Luisa
  • AMPHIBIAN Project ID:720853
[EN] The occurrence of ε-FeO in archaeological samples that have been subjected to high temperatures is gradually being detected by the use of micrometric structural characterization techniques. This work provides new information by revealing that the ε-FeO is formed as a response to temperature, the aggregation state and the position within the baked clay with respect to the nearest heat source. In addition, depending mainly on the atmospheric environment, the temperature reached by the combustion structure, the distance from the heating source and the particle aggregation, other iron oxide magnetic phases are produced. In the baked clay studied here, hematite is found over the whole range of samples studied but its magnetic contribution is negligible. Magnetite is observed at the sample surface, probably due to local atmospheric environment closest to the combustion source. Maghemite is found at all depths up to 6 cm below the sample surface. ε-FeO has a limited distribution, found within 2–3 cm of the sample surface. Furthermore, the viability of this compound as a palaeofield marker has been evaluated in both archaeological and synthetic samples. The results indicate that ε-FeO is able to register the direction of the magnetic field. Linear palaeointensity plots have been obtained in synthetic samples, although the value of the palaeofield could be, sometimes, overestimated., The authors also acknowledge the financial support from the Spanish Ministry of Science, Innovation and Universities under the projects RTI2018-095856-B-C21, CGL2017-87015-P, CGL2017-92285-EXP, CGL2017-92285-EXP/BTE, MAT2017-86540-C4-1-R, MAT2017-87072-C4-2-P and RTI2018-095303-A-C52, from Comunidad de Madrid NANOFRONTMAG S2013/MIT-2850 and NANOMAGCOST S2018/NMT-4321, and from the European Commission under H2020 frame by AMPHIBIAN Project ID: 720853. APO thanks the Ministry of Economy, Industry and Competitiveness (PTA Contract)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Efectos del procesamiento cerámico y la adición de nanohilos de FeCo en la obtención de diferentes tipos de imanes permanentes de ferrita más sostenibles y mejorados.

  • Guzmán-Mínguez, J. C.
  • AMPHIBIAN Project ID:720853
La realización de este trabajo ha sido posible gracias a la financiación del Ministerio de Ciencia e Innovación de España a través de los Proyectos no. MAT2017-86450-C4-1-R, MAT2015-64110-C2-1-P, MAT2015-64110-C2-2-P, MAT2017-87072-C4-2-P, RTI2018-095303-B-C51, RTI2018-095303-B-C53, RTI2018-095303-A-C52 y FIS2017-82415-R y a través del Contrato Ramón y Cajal RYC-2017-23320; y por la Comisión Europea a través del Proyecto H2020 nº 720853 (AMPHIBIAN). El trabajo está financiado también por la Comunidad de Madrid a través del Proyecto S2018/NMT-4321 (NANOMAGCOST)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Highly Bi-doped electrodeposited Cu nanowires for spintronics applications

  • Ruiz-Gómez, Sandra
  • Fernández-González, Claudia
  • Guedeja-Marrón, Alejandra
  • Serrano Rubio, Aída
  • González Barrio, Miguel Ángel
  • Varela, María
  • Mascaraque, Arantzazu
  • Pérez, Lucas
Bi-doped Cu alloys are promising materials in the field of Spintronics due to the possibility of having efficient charge to spin conversion via spin Hall effect. To explore this effect, in particular at the nanoscale, it is essential to have a growth method that allows the control of crystal quality, cluster formation and microstructure. In this paper, we demonstrate that electrochemical deposition is a suitable method for the synthesis of these nanomaterials. We report the growth, by template assisted electrodeposition, of high quality, homogeneous nanowires of a diluted alloy of Bi dispersed into a Cu matrix, in which Bi concentration can be easily varied by tuning electrolyte composition. Structural analysis shows that Bi does not cluster but incorporate into the Cu matrix. The short-range order is nevertheless affected by the deposition potential. Cu is basically metallic, and Cu–Cu nearest-neighbor distances are those of bulk Cu, so Bi enters into the Cu structure substitutionally. Using low overpotential, we demonstrate the possibility of growing single crystal nanowires., This work has been partially funded by MAT2017-87072-C4-2-P and RTI2018-097895-B-C43 from the Ministerio de Ciencia e Innovación (MINECO-FEDER). We acknowledge The European Synchrotron (ESRF), MINECO and CSIC for provision of synchrotron radiation facilities, BM25-SpLine staff for the technical support beyond their duties and the financial support for the beamline (PIE-2010-OE-013-200014). We thank the CAI de Difracción de Rayos X, Universidad Complutense de Madrid, for XRD measurements. Electron microscopy observations were carried out at the Centro Nacional de Microscopía Electrónica node of the ICTS-ELECMI. A.S. acknowledges financial support from Comunidad de Madrid for an Atracción de Talento Investigador Contract (2017-t2/IND5395)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct X-Ray Detection of the Spin Hall Effect in CuBi

  • Ruiz-Gómez, Sandra
  • Guerrero, Rubén
  • Khaliq, Muhammad W.
  • Fernández-González, Claudia
  • Prat, Jordi
  • Valera, Andrés
  • Finizio, Simone
  • Perna, Paolo
  • Camarero, Julio
  • Pérez, Lucas
  • Aballe, Lucía
  • Foerster, Michael
13 pags., 12 figs., 8 apps. -- Subject Areas: Condensed Matter Physics, Spintronics, The spin Hall effect and the inverse spin Hall effect are important spin-charge conversion mechanisms. The direct spin Hall effect induces a surface spin accumulation from a transverse charge current due to spin-orbit coupling even in nonmagnetic conductors. However, most detection schemes involve additional interfaces, leading to large scattering in reported data. Here we perform interface-free x-ray spectroscopy measurements at the Cu L3,2 absorption edges of highly Bi-doped Cu (Cu95Bi5). The detected x-ray magnetic circular dichroism signal corresponds to an induced magnetic moment of (2.2±0.5)×10-12 μB A-1 cm2 per Cu atom averaged over the probing depth, which is of the same order of magnitude as found for Pt measured by magneto-optics. The results highlight the importance of interface-free measurements to assess material parameters and the potential of CuBi for spin-charge conversion applications., This work has been partially funded by MCIN/AEI/10.13039/501100011033 through Projects No. FIS2016-78591-C3-1-R, No. MAT2017-87072-C4-2-P, No. RTI2018-097895-BC42, No. RTI2018-095303-B-C53, and No. PID2020–117024GB-C43 and by the Comunidad de Madrid through Project No. NANOMAGCOST-CM P2018/NMT-4321. IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (Grants No. SEV-2016-0686 and No. CEX2020-001039-S). The work has been supported by the ALBA inhouse research program. We thank the Spanish National Center of Electron Microscopy for Scanning Electron Microscopy measurements. M. W. K. acknowledges funding from Horizon 2020 Marie Skłodowska-Curie COFUND DOC-FAM, with Grant agreement No. 754397., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large asymmetry in the magnetoresistance loops of ferromagnetic nanostrips induced by Surface Acoustic Waves

  • Castilla, David
  • Muñoz, Manuel
  • Sinusía, Miguel
  • Yanes, Rocío
  • Prieto, José L.
8 páginas, 5 figuras., In this work we show that Surface Acoustic Waves (SAW) can induce a very large asymmetry in the magnetoresistance loop of an adjacent ferromagnetic nanostrip, making it look as if it had exchange bias. The Surface Acoustic Wave induces a DC voltage in the ferromagnetic nanostrip. For measurements at constant current, this DC voltage makes the AMR loop asymmetric. In a series of different electrical experiments, we disentangle two different contributions to the induced DC voltage. One of them is independent on the external magnetic field and it is likely due to the acoustoelectric effect. A second contribution depends on the external magnetic field and it is a rectified voltage induced in the piezoelectric substrate as a response to the magnetization dynamics in the magnetostrictive nanostrip. The large asymmetry in the magnetoresistance loop reported in this work is a manifestation of an effective transfer of energy from the SAW to the magnetization dynamics, a mechanism that has been very recently appointed as a possible mean to harvest energy from a heat source., We acknowledge the support from projects MAT2017-87072-C4-1-P, MAT2017-87072-C4-4-P and MAT2017- 87072-C4-3-P from the Spanish government and project SA299P18 from the Junta de Castilla y Leon., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Highly Bi-doped Cu thin films with large spin-mixing conductance

  • Ruiz-Gómez, S.
  • Serrano, A.
  • Guerrero, R.
  • Muñoz, M.
  • Lucas, I.
  • Foerster, M.
  • Aballe, L.
  • Marco, J.F.
  • Amado, M.
  • McKenzie-Sell, L.
  • Di Bernardo, A.
  • Robinson, J.W.A.
  • González Barrio, M.Á.
  • Mascaraque, A.
  • Pérez, L.
The spin Hall effect (SHE) provides an efficient tool for the production of pure spin currents, essentially for the next generation of spintronics devices. Giant SHE has been reported in Cu doped with 0.5% Bi grown by sputtering, and larger values are predicted for larger Bi doping. In this work, we demonstrate the possibility of doping Cu with up to 10% of Bi atoms without evidence of Bi surface segregation or cluster formation. In addition, YIG/BiCu structures have been grown, showing a spin mixing conductance larger that the one shown by similar Pt/YIG structures, reflecting the potentiality of these new materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Observation of a topologically protected state in a magnetic domain wall stabilized by a ferromagnetic chemical barrier

  • Ruiz-Gomez, S.
  • Foerster, M.
  • Aballe, L.
  • Proenca, M.P.
  • Lucas, I.
  • Prieto, J.L.
  • Mascaraque, A.
  • de la Figuera, J.
  • Quesada, A.
  • Perez, L.
The precise control and stabilization of magnetic domain walls is key for the development of the next generation magnetic nano-devices. Among the multitude of magnetic configurations of a magnetic domain wall, topologically protected states are of particular interest due to their intrinsic stability. In this work, using XMCD-PEEM, we have observed a topologically protected magnetic domain wall in a ferromagnetic cylindrical nanowire. Its structure is stabilized by periodic sharp alterations of the chemical composition in the nanowire. The large stability of this topologically protected domain wall contrasts with the mobility of other non-protected and non-chiral states also present in the same nanowire. The micromagnetic simulations show the structure and the conditions required to find the topologically protected state. These results are relevant for the design of future spintronic devices such as domain wall based RF oscillators or magnetic memories.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Observation of a topologically protected state in a magnetic domain wall stabilized by a ferromagnetic chemical barrier

  • Ruiz-Gómez, Sandra|||0000-0002-9665-2059
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Proença, Mariana P.
  • Lucas del Pozo, Irene
  • Prieto, José Luis|||0000-0003-2298-2714
  • Mascaraque, Arantzazu
  • Figuera, Juan de la|||0000-0002-7014-4777
  • Quesada, Adrian
  • Pérez, Lucas|||0000-0001-9470-7987
The precise control and stabilization of magnetic domain walls is key for the development of the next generation magnetic nano-devices. Among the multitude of magnetic configurations of a magnetic domain wall, topologically protected states are of particular interest due to their intrinsic stability. In this work, using XMCD-PEEM, we have observed a topologically protected magnetic domain wall in a ferromagnetic cylindrical nanowire. Its structure is stabilized by periodic sharp alterations of the chemical composition in the nanowire. The large stability of this topologically protected domain wall contrasts with the mobility of other non-protected and non-chiral states also present in the same nanowire. The micromagnetic simulations show the structure and the conditions required to find the topologically protected state. These results are relevant for the design of future spintronic devices such as domain wall based RF oscillators or magnetic memories.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly Bi-doped Cu thin films with large spin-mixing conductance

  • Ruiz-Gómez, Sandra|||0000-0002-9665-2059
  • Serrano, Aida|||0000-0002-6162-0014
  • Guerrero, Rubén
  • Muñoz, Manuel
  • Lucas del Pozo, Irene
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Marco, José F.
  • Amado, Mario|||0000-0002-3296-5064
  • McKenzie-Sell, Lauren
  • Di Bernardo, Angelo|||0000-0002-2912-2023
  • Robinson, Jason W. A.
  • González Barrio, Miguel Ángel
  • Mascaraque, Arantzazu
  • Pérez, Lucas|||0000-0001-9470-7987
The spin Hall effect (SHE) provides an efficient tool for the production of pure spin currents, essentially for the next generation of spintronics devices. Giant SHE has been reported in Cu doped with 0.5% Bi grown by sputtering, and larger values are predicted for larger Bi doping. In this work, we demonstrate the possibility of doping Cu with up to 10% of Bi atoms without evidence of Bi surface segregation or cluster formation. In addition, YIG/BiCu structures have been grown, showing a spin mixing conductance larger that the one shown by similar Pt/YIG structures, reflecting the potentiality of these new materials.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Geometrical design for pure current-driven domain wall nucleation and shifting

  • Osuna Ruiz, David
  • Alejos, Óscar
  • Raposo, Víctor
  • Clemos Martínez, Eduardo
Nucleation of domain walls by current-driving a single domain wall, confined to the junction area of two symmetrical strips, is investigated using systematic micromagnetic simulations. Secondary domain walls (equivalently, bits encoded in domains) are simultaneously nucleated and driven by alternatively applying current pulses between two terminals in the structure. Simulations show that nanosecond-duration current pulses nucleate and drive series of robust up/down domains even under realistic conditions. These results demonstrate a technique for sequentially nucleating and shifting domain walls without using attached external "bit lines," fields, or modifying the ferromagnetic strip., This work was supported by Project No. SA114P20 from Junta de Castilla y León (JCyL) and, partially, by Project No. PID2020-117024GB-C41 funded by Ministerio de Ciencia e Innovación, No. MAT2017-87072-C4-1-P from the Ministry of Economy, Spanish Government No. SA299P18 from JCyL, and MAGNEFI Grant agreement No. 860060 from the European Commission, European Union.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Current-driven domain wall motion in curved ferrimagnetic strips above and below the angular momentum compensation

  • Osuna Ruiz, David
  • Alejos, Óscar
  • Raposo, Víctor
  • Clemos Martínez, Eduardo
Datos de investigación alojados en: https://gredos.usal.es/handle/10366/165892, Current driven domain wall motion in curved Heavy Metal/Ferrimagnetic/Oxide multilayer strips is investigated using systematic micromagnetic simulations which account for spin-orbit coupling phenomena. Domain wall velocity and characteristic relaxation times are studied as functions of the geometry, curvature and width of the strip, at and out of the angular momentum compensation. Results show that domain walls can propagate faster and without a significant distortion in such strips in contrast to their ferromagnetic counterparts. Using an artificial system based on a straight strip with an equivalent current density distribution, we can discern its influence on the wall terminal velocity, as part of a more general geometrical influence due to the curved shape. Curved and narrow ferrimagnetic strips are promising candidates for designing high speed and fast response spintronic circuitry based on current-driven domain wall motion., This work was supported by the project SA114P20 from Junta de Castilla y Leon (JCyL), and partially supported by the projects SA299P18 from JCyL, MAT2017-87072-C4-1-P and PID2020-117024GB-C41 from the Ministry of Economy, Spanish government, and MAGNEFI, from the European Commission (European Union).