Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Synthesis of porous hydroxyapatites by combination of gelcasting and foams burn out methods

  • Padilla Mondéjar, Sussette
  • Román Zaragoza, Jesús
  • Vallet Regí, María Dulce Nombre
The biocompatibility and the osteoconductive behavior of hydroxyapatite (OHAp) ceramics are well established. Bioceramics made of OHAp are available in dense and porous form. Recently it has been proved that the volume of bone ingrowth at early times is primarily interconnectivity dependent. A new method for the obtention of porous OHAp ceramics that combine the in situ polymerization (gel casting method) and the foams burn out is proposed. Four polyurethane foams with different cells/cm were used. The foams were fully filled of an OHAp polymerizable suspension that after gelled produced very homogeneous and strong green bodies. After different thermal treatments the green bodies yield porous OHAp ceramics that were a replica of the foams used. Materials used in this work were studied by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), N(2) adsorption isotherm, particle size distribution, and Hg porosimetry. Porous pieces of OHAp obtained are constituted by polyhedral-like particles (0.45-1.0 microm) that are surrounded by an interconnected network of pores. A bimodal distribution of the pores size between 30.8-58.6 and 1.0-1.2 microm has been observed. The size of the interconnected pores (30.8-58.6 microm) was controlled as a function of the cells/cm of the foam while the volume of the small pores was modified as a function of the sintering time. The presence of pores could promote the bone ingrowth and also could be used to insert different drugs, which makes these porous pieces a potential candidate to be used as non-load-bearing bone implants and as drug delivery systems.
Docta Complutense
Publication Artículo científico (JournalArticle)

Sol−Gel Glasses as Precursors of Bioactive Glass Ceramics

  • Román Zaragoza, Jesús
  • Padilla Mondéjar, Sussette
  • Vallet Regí, María Dulce Nombre
The aim of this work was to study the influence of the composition and thermal treatment on the in vitro bioactivity of glasses and glass ceramics obtained by the sol−gel method, to obtain bioactive glass ceramics in a simpler system than those at present. For this purpose, gels in the systems SiO2−CaO (70S:  70/30) and SiO2−CaO− P2O5 (55S:  55/41/4) were heated at temperatures ranging between 700 and 1400 °C. The samples were characterized by DTA/TG, XRD, FTIR, SEM, and EDS and an in vitro bioactivity study in SBF was carried out. The results showed that all materials obtained (glasses or glass ceramics) were bioactive. The bioactivity was influenced by the initial gel composition, by the thermal treatment, and by the different phases present in the glass ceramics. In glasses the bioactivity decreased with the stabilization temperature. In the glass ceramics the bioactivity was favored by the presence of pseudo-wollastonite (most soluble phase of CaSiO3) and of tricalcium phosphate.
Docta Complutense
Publication Artículo científico (JournalArticle)

In vitro release of gentamicin from OHAp/PEMA/PMMA samples

  • Padilla Mondéjar, Sussette
  • Pérez del Real, Rafael
  • Vallet Regí, María Dulce Nombre
The influence of hydroxyapatite (OHAp) and gentamicin sulphate (GEN) contents on the release kinetics of GEN, in samples composed of OHAp, poly(methyl methacrylate) (PMMA) and poly(ethyl methacrylate) (PEMA) has been studied. For this purpose, samples with 30 and 40% of OHAp and 5 and 9% of GEN were prepared. The in vitro release study was carried out soaking the samples in simulated body fluid (SBF) at 37 °C for 70 days. The release profiles showed a faster release during the first 10 h, diminishing progressively until the end of the study. It was noticed that the percentage of released GEN increased with the OHAp content. For samples with 40% of OHAp, GEN release is nearly independent of the initial amount of such drug (in the range 5–9%), whereas for samples with 30% of OHAp, the release process is favoured by higher contents of GEN, which would favour a higher SBF uptake. GEN release is related to SBF uptake, which is in turn related, on the one hand, to the OHAp content (increase of the porosity and the hydrophilic character of the samples) and on the other hand, to content of GEN.