Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Synthesis of porous hydroxyapatites by combination of gelcasting and foams burn out methods

  • Padilla Mondéjar, Sussette
  • Román Zaragoza, Jesús
  • Vallet Regí, María Dulce Nombre
The biocompatibility and the osteoconductive behavior of hydroxyapatite (OHAp) ceramics are well established. Bioceramics made of OHAp are available in dense and porous form. Recently it has been proved that the volume of bone ingrowth at early times is primarily interconnectivity dependent. A new method for the obtention of porous OHAp ceramics that combine the in situ polymerization (gel casting method) and the foams burn out is proposed. Four polyurethane foams with different cells/cm were used. The foams were fully filled of an OHAp polymerizable suspension that after gelled produced very homogeneous and strong green bodies. After different thermal treatments the green bodies yield porous OHAp ceramics that were a replica of the foams used. Materials used in this work were studied by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), N(2) adsorption isotherm, particle size distribution, and Hg porosimetry. Porous pieces of OHAp obtained are constituted by polyhedral-like particles (0.45-1.0 microm) that are surrounded by an interconnected network of pores. A bimodal distribution of the pores size between 30.8-58.6 and 1.0-1.2 microm has been observed. The size of the interconnected pores (30.8-58.6 microm) was controlled as a function of the cells/cm of the foam while the volume of the small pores was modified as a function of the sintering time. The presence of pores could promote the bone ingrowth and also could be used to insert different drugs, which makes these porous pieces a potential candidate to be used as non-load-bearing bone implants and as drug delivery systems.
Docta Complutense
Publication Artículo científico (JournalArticle)

Sol−Gel Glasses as Precursors of Bioactive Glass Ceramics

  • Román Zaragoza, Jesús
  • Padilla Mondéjar, Sussette
  • Vallet Regí, María Dulce Nombre
The aim of this work was to study the influence of the composition and thermal treatment on the in vitro bioactivity of glasses and glass ceramics obtained by the sol−gel method, to obtain bioactive glass ceramics in a simpler system than those at present. For this purpose, gels in the systems SiO2−CaO (70S:  70/30) and SiO2−CaO− P2O5 (55S:  55/41/4) were heated at temperatures ranging between 700 and 1400 °C. The samples were characterized by DTA/TG, XRD, FTIR, SEM, and EDS and an in vitro bioactivity study in SBF was carried out. The results showed that all materials obtained (glasses or glass ceramics) were bioactive. The bioactivity was influenced by the initial gel composition, by the thermal treatment, and by the different phases present in the glass ceramics. In glasses the bioactivity decreased with the stabilization temperature. In the glass ceramics the bioactivity was favored by the presence of pseudo-wollastonite (most soluble phase of CaSiO3) and of tricalcium phosphate.
Docta Complutense
Publication Artículo científico (JournalArticle)

Hydroxyapatite suspensions as precursors of pieces obtained by gelcasting method

  • Padilla Mondéjar, Sussette
  • Vallet Regí, María Dulce Nombre
  • R Garcı́a-Carrodeguas
The aim of this work was to prepare slurries of hydroxyapatite (OHAp) with a high content of solids, which is necessary for shaping pieces by the gelcasting method. For this purpose different studies were carried out using powders of OHAp calcined at temperatures ranging between 600 and 1200 °C and several dispersants. Surface area, porosity and chemical composition of OHAp powders played a fundamental role in the viscosity of slurries. The highest concentration of solid was obtained with OHAp calcined at 1200 °C. The best dispersant was selected in a first stage, by electrophoretic measurements and sedimentation studies and, finally, by rheological measurements. The concentration of dispersant which provides the minimum viscosity, depended on the calcination temperature of the OHAp. A great increased of viscosity took place for time of slurries preparation higher than 30 min. Milling of powder for 20 h was necessary to improve the rheological behaviour of the slurries. Finally, ceramic bodies were prepared from fluid slurries containing 60 vol.% of solids and the mechanical properties were evaluated.
Docta Complutense
Publication Artículo científico (JournalArticle)

Gentamicin release from hydroxyapatite/poly(ethyl methacrylate)/poly(methyl methacrylate)composites

  • Padilla Mondéjar, Sussette
  • Vallet Regí, María Dulce Nombre
  • Pérez del Real, Rafael
In this work the release kinetics of gentamicin sulfate (GEN) in samples composed by hydroxyapatite, poly(methyl methacrylate), and poly(ethyl methacrylate) has been studied. The release study was performed by soaking three samples in simulated body fluid at 37°C; the medium was periodically replaced during 70 days. The concentration of GEN was determined by the o-phtaldialdehyde method. The release profile shows three stages: the first stage, occurring during the first 10 h, corresponds to a fast release (nearly 30% of the drug is released in this period). The second stage is slower and includes from the first 10 h to 16 days, releasing 60% of the total amount of GEN. The final stage is the slowest and it takes from 16 to 70 days (10% of GEN is released). The fraction of released GEN versus square root of time can be fitted to a third order polynomial, corresponding with the model proposed by Cobby et al. (J Pharm Sci 1974;63:725–732). The characterization of the samples after the release study shows that a carbonate hydroxyapatite layer has grown on the whole surface of the composites.
Docta Complutense
Publication Artículo científico (JournalArticle)

Processing and mechanical properties of hydroxyapatite pieces obtained by the gelcasting method

  • Padilla Mondéjar, Sussette
  • Vallet Regí, María Dulce Nombre
  • Ginebra, María Pau
  • Gil, Javier
The aim of this work was to prepare hydroxyapatite (HA) pieces, by the gelcasting method, with appropriate mechanical properties for using as bone implants. The mechanical properties of the obtained pieces were evaluated. The influence of the solid content on the rheological behaviour of the slurries and, in turn, on the mechanical properties, was investigated. Pieces were prepared by using slurries containing 55 and 60 vol.% of an HA calcined at 1200 °C and 47 vol.% of HA calcined at 1100 °C. HA powders calcined at lower temperature than 1100 °C were not suitable for producing concentrated slurries. The raw and calcined HA were characterised by XRD, FTIR, X-ray fluorescence and elemental analysis. The pieces sintered at different temperatures and times were characterised by XRD, and the sintering treatment applied to the specimens for mechanical testing (1300 °C for 24 h) was selected taking into account the phases present after sintering. The mechanical properties of the green bodies were higher than obtained by other methods and the ones of the final pieces were comparable to those obtained by other techniques. The results indicated that slurries with a solid content higher than a limit value (for which limited contraction occurs) must be used and that the rheological properties of the slurries play an important role in the mechanical properties of the resulting pieces.
Docta Complutense
Publication Artículo científico (JournalArticle)

In vitro release of gentamicin from OHAp/PEMA/PMMA samples

  • Padilla Mondéjar, Sussette
  • Pérez del Real, Rafael
  • Vallet Regí, María Dulce Nombre
The influence of hydroxyapatite (OHAp) and gentamicin sulphate (GEN) contents on the release kinetics of GEN, in samples composed of OHAp, poly(methyl methacrylate) (PMMA) and poly(ethyl methacrylate) (PEMA) has been studied. For this purpose, samples with 30 and 40% of OHAp and 5 and 9% of GEN were prepared. The in vitro release study was carried out soaking the samples in simulated body fluid (SBF) at 37 °C for 70 days. The release profiles showed a faster release during the first 10 h, diminishing progressively until the end of the study. It was noticed that the percentage of released GEN increased with the OHAp content. For samples with 40% of OHAp, GEN release is nearly independent of the initial amount of such drug (in the range 5–9%), whereas for samples with 30% of OHAp, the release process is favoured by higher contents of GEN, which would favour a higher SBF uptake. GEN release is related to SBF uptake, which is in turn related, on the one hand, to the OHAp content (increase of the porosity and the hydrophilic character of the samples) and on the other hand, to content of GEN.