Skip to main content

METODOS NUMERICOS EFICIENTES EN DINAMICA DE FLUIDOS E INTERACCION FLUIDO-ESTRUCTURA. APLICACIONES A LA ENERGIA Y EL MEDIO AMBIENTE.

MTM2013-43745-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulación numérica de inundaciones en Villahermosa México usando el código IBER, Numerical simulation of the floods in Villahermosa Mexico using the IBER code

  • González-Aguirre, J.C.
  • Vázquez-Cendón, M.E.
  • Alavez-Ramírez, J.
[EN] Floods are a problem that may occur in many parts of the world, but in certain places it happens more frequently, for example in Villahermosa, Mexico, which can be confirmed with the floods of 2000, 2007, 2009 and 2010. In this work the IBER code is used (freely available at http://www.iberaula.es) to recreate the scenarios occurred in October 2007, and the numerical results are compared with data provided/collected by CONAGUA in the Hydrometeorological station Gaviotas. The scenarios of the 1st October, 30th October and 31st October were simulated. A steady state was obtained in the simulation of the 1st October, this state was used as initial condition for the simulation of the 30th October, in which are reproduced the conditions of the 31st October. In addition, a sensibility analysis was carried out for the wetting drying parameter and the Courant numbe, [ES] Las inundaciones son un problema que afecta a muchas partes del mundo, pero en algunos sitios suceden con mayor frecuencia, por ejemplo en Villahermosa México, lo cual se puede constatar con las inundaciones ocurridas en el 2000, 2007, 2009 y 2010. En el presente trabajo se emplea el código IBER (disponible gratuitamente en http://www.iberaula.es) para recrear los escenarios que se presentaron en la planicie tabasqueña en Octubre de 2007 y se comparan los resultados numéricos con los datos obtenidos de la estación hidrometeorológica de Gaviotas reportados por CONAGUA. Los escenarios simulados corresponden a los días 1, 30 y 31 de Octubre. En la simulación del día 1 de Octubre se obtuvo un estado estacionario, el cual se utilizó como condición inicial en las simulaciones de los días 30 y 31 de Octubre, en las cuales se recrean las condiciones del 31 de Octubre en la planicie tabasqueña. Adicionalmente se realiza un análisis de sensibilidad sobre el parámetro de seco mojado y el número de Courant., Los autores quieren manifestar su agradecimiento a L. Cea, M. Cobas y L.M. García-García por sus inestimables sugerencias. Este agradecimiento se hace extensivo a los revisores por sus valiosas aportaciones y comentarios. El trabajo contó con el financiamiento del fondo mixto Conacyt-Gobierno del estado de Tabasco bajo la referencia TAB-2007-C10-82422/04. Esta investigación también fue parcialmente apoyada por los proyectos CGL2011-28499-C03-01, MTM2013-43745-R, los fondos FEDER y el proyecto de la Xunta de Galicia GRC2013-014.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A staggered semi-implicit hybrid FV/FE projection method for weakly compressible flows

  • Bermúdez de Castro López-Varela, Alfredo
  • Busto Ulloa, Saray
  • Dumbser, Michael
  • Ferrín González, José Luis
  • Saavedra, Laura
  • Vázquez Cendón, María Elena
In this article we present a novel staggered semi-implicit hybrid finite-volume/finite-element (FV/FE) method for the resolution of weakly compressible flows in two and three space dimensions. The pressure-based methodology introduced in [1], [2] for viscous incompressible flows is extended here to solve the compressible Navier-Stokes equations. Instead of considering the classical system including the energy conservation equation, we replace it by the pressure evolution equation written in non-conservative form. To ease the discretization of complex spatial domains, face-type unstructured staggered meshes are considered. A projection method allows the decoupling of the computation of the density and linear momentum variables from the pressure. Then, an explicit finite volume scheme is used for the resolution of the transport diffusion equations on the dual mesh, whereas the pressure system is solved implicitly by using continuous finite elements defined on the primal simplex mesh. Consequently, the CFL stability condition depends only on the flow velocity, avoiding the severe time restrictions that might be imposed by the sound velocity in the weakly compressible regime. High order of accuracy in space and time of the transport diffusion stage is attained using a local ADER (LADER) methodology. Moreover, also the CVC Kolgan-type second order in space and first order in time scheme is considered. To prevent spurious oscillations in the presence of shocks, an ENO-based reconstruction, the minmod limiter or the Barth-Jespersen limiter are employed. To show the validity and robustness of our novel staggered semi-implicit hybrid FV/FE scheme, several benchmarks are analysed, showing a good agreement with available exact solutions and numerical reference data from low Mach numbers, up to Mach numbers of the order of unity.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Numerical Experiments with the Fokker-Planck Equation in 1D Slab Geometry

  • López Pouso, Óscar
  • Jumaniyazov, Nizomjon
Several numerical experiments with the steady monoenergetic Fokker–Planck equation in the one-dimensional (1D) slab are performed and discussed. Planar-geometry symmetry is assumed. Results are obtained with a new numerical scheme of order 2 based on finite differences.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Numerical Simulation of Bed Load and Suspended Load Sediment Transport Using Well-Balanced Numerical Schemes

  • González-Aguirre, J. C.
  • González-Vázquez, J. A.
  • Álvavez-Ramírez, J.
  • Silva, R.
  • Vázquez Cendón, María Elena
Sediment transport can be modelled using hydrodynamic models based on shallow water equations coupled with the sediment concentration conservation equation and the bed conservation equation. The complete system of equations is made up of the energy balance law and the Exner equations. The numerical solution for this complete system is done in a segregated manner. First, the hyperbolic part of the system of balance laws is solved using a finite volume scheme. Three ways to compute the numerical flux have been considered, the Q-scheme of van Leer, the HLLCS approximate Riemann solver, and the last one takes into account the presence of non-conservative products in the model. The discretisation of the source terms is carried out according to the numerical flux chosen. In the second stage, the bed conservation equation is solved by using the approximation computed for the system of balance laws. The numerical schemes have been validated making comparisons between the obtained numerical results and the experimental data for some physical experiments. The numerical results show a good agreement with the experimental data.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A projection hybrid high order finite volume/finite element method for incompressible turbulent flows

  • Busto Ulloa, Saray
  • Ferrín González, José Luis
  • Toro, Eleuterio Francisco
  • Vázquez Cendón, María Elena
In this paper the projection hybrid FV/FE method presented in [1] is extended to account for species transport equations. Furthermore, turbulent regimes are also considered thanks to the k–ε model. Regarding the transport diffusion stage new schemes of high order of accuracy are developed. The CVC Kolgan-type scheme and ADER methodology are extended to 3D. The latter is modified in order to profit from the dual mesh employed by the projection algorithm and the derivatives involved in the diffusion term are discretized using a Galerkin approach. The accuracy and stability analysis of the new method are carried out for the advection–diffusion–reaction equation. Within the projection stage the pressure correction is computed by a piecewise linear finite element method. Numerical results are presented, aimed at verifying the formal order of accuracy of the scheme and to assess the performance of the method on several realistic test problems.
RUC. Repositorio da Universidade da Coruña
Publication Capítulo o parte de un libro (BookPart)

Contributions to the Mathematical Technology Transfer with Finite Volume Methods

  • Bermúdez, Alfredo
  • Busto, Saray
  • Cea, Luis
  • Vázquez-Cendon, M. Elena
[Abstract:] At the early 1980s, the research group in Mathematical Engineering, mat+i, started working on finite volume methods for the simulation of environmental issues concerning Galician rias (Spain). The focus was on the study of hyperbolic balance laws due to the presence of source terms related to the bathymetry. A correct treatment of these terms, an upwind discretization, was presented in [2, 7, 22]. The transfer of this knowledge has motivated the registration of the software Iber (http://www.iberaula.es). Latterly, under different research problems, we have been working on the development of a numerical algorithm for the resolution of Euler and Navier–Stokes equations. A hybrid projection finite volume/finite element method is employed making use of unstructured staggered grids (see [3, 9]). To attain second order of accuracy ADER methodology is employed [10]. On the other hand, with numerical simulation of gas transportation networks in view, a first-order well balanced finite volume scheme for the solution of a model, for the flow of a multicomponent gas in a pipe on non-flat topography, is introduced. The mathematical model consists of Euler equations, with source terms, coupled with the mass conservation equations of species. We propose a segregated scheme in which Euler and species equations are solved separately [6]., The authors are indebted to E.F. Toro, from the Laboratory of Applied Mathematics, University of Trento, for the useful discussions on the subject. This project was partially supported by Spanish MECD, grant FPU13/00279; by Xunta de Galicia, grant PRE/2013/031; by Spanish MICINN projects MTM2013-43745-R and MTM2017-86459-R; by Xunta de Galicia and FEDER under project GRC2013-014 and by Fundación Barrié; by the Reganosa company., Xunta de Galicia; PRE/2013/031, Xunta de Galicia; GRC2013-014
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Adjoint method for parameter identification problems in models of stirred tank chemical reactors

  • Benítez, Marta
  • Bermúdez, Alfredo
  • Rodríguez Calo, José Francisco
[Abstract]: In this paper an adjoint-based algorithm for parameter identification problems in systems of ordinary differential equations (ODEs) is presented. This is done by solving a minimization problem in which the cost function is defined in order to quantify the mismatch between the observed data and the numerical solution of the ODEs. Most of existing local minimizers need the derivatives of both the cost function and the constraints that are usually calculated by finite-difference formulas. In this paper we show how they can be computed much more efficiently and accurately by the so-called adjoint method. We apply this method to the problem of estimating a set of unknown parameters appearing in chemical reaction models. Numerical results showing the efficiency of the adjoint method are included., This research was developed as an activity in the Joint Research Unit Repsol-ITMATI (code file: IN853A 2014/03) which is funded by the Galician Agency for Innovation and the Ministry of Economy and Competitiveness in the framework of the Spanish Strategy for Innovation in Galicia. The first author has been also financed by FEDER and Spanish Ministry of Economy, Industry and Competitiveness under research project MTM2013-43745-R, and by FEDER and Xunta de Galicia, and the second author has been also financed by FEDER and Spanish Ministry of Science and Innovation under research project ENE2013-47867-C2-1-R and by FEDER and Xunta de Galicia under research project GRC2013/014., Axencia Galega de Innovación; IN853A 2014/03, Xunta de Galicia; GRC2013/014
RUC. Repositorio da Universidade da Coruña
Publication Capítulo o parte de un libro (BookPart)

A Second-Order Linear Newmark Method for Lagrangian Navier-Stokes Equations

  • Benítez, Marta
  • Bermúdez, Alfredo
  • Fontán, Pedro
[Abstract]: In this paper we propose a second-order pure Lagrange-Galerkin method for the numerical solution of free surface problems in fluid mechanics. We consider a viscous, incompressible Newtonian fluid in a time dependent domain which may present large deformations but no topological changes at interfaces. Pure-Lagrangian methods are useful for solving these problems because the convective term disappears, the computational domain is independent of time and modelling and tracking of the free surface is straightforward as far as there is no solid walls preventing the free motion of surface particles. Unfortunately, for moderate to high-Reynolds number flows and as a consequence of high distortion of the moved mesh, it can be necessary to re-mesh and re-initialize the motion each certain time. In this paper, a Newmark algorithm is considered for both, the time semi-discretization of equations in Lagrangian coordinates and the computation of initial conditions. The proposed scheme is pure-Lagrangian and can be written in terms of either material velocity and pressure or material acceleration and pressure or material displacement and pressure. The three formulations are stated. In order to assess the performance of the overall numerical method, we solve different problems in two space dimensions. In particular, numerical results of a dam break problem and a flow past a cylinder are presented., This work was partially funded by FEDER and the Spanish Ministry of Science and Innovation under research projects ENE2013-47867-C2-1-R and MTM2013-43745-R, and by FEDER and Xunta de Galicia under research project GRC2013/014., Xunta de Galicia; GRC2013/014