Skip to main content

APLICACIONES DE LA MODELIZACION, LA SIMULACION NUMERICA, LA OPTIMIZACION Y EL CONTROL OPTIMO AL DISEÑO DE DISPOSITIVOS Y PROCESOS INDUSTRIALES.

MTM2017-86459-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDADE DE SANTIAGO DE COMPOSTELA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Numerical Solution of the Azimuth-Dependent Fokker-Planck Equation in 1D Slab Geometry

  • López Pouso, Óscar
  • Jumaniyazov, Nizomjon
This paper is devoted to solve the steady monoenergetic Fokker-Planck equation in the 1D slab when the incoming fluxes and the source term are allowed to depend on the azimuth θ. The problem is split into a collection of θ-independent problems for the Fourier coefficients of the full solution. The main difficulty is that, except for the zeroth Fourier coefficient, each of these problems contains an artificial absorption coefficient which is singular at the poles. Two numerical schemes capable of dealing with the singularities are proposed: one that is considered as the main scheme, and a second ‘security’ scheme which is used to verify that the results obtained by means of the first one are reliable. Numerical experiments showing second order of convergence are conducted and discussed.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A semi-implicit hybrid finite volume/finite element scheme for all Mach number flows on staggered unstructured meshes

  • Busto Ulloa, Saray
  • Río Martín, Laura del
  • Vázquez Cendón, María Elena
  • Dumbser, Michael
In this paper a new hybrid semi-implicit finite volume / finite element (FV/FE) scheme is presented for the numerical solution of the compressible Euler and Navier–Stokes equations at all Mach numbers on unstructured staggered meshes in two and three space dimensions. The chosen grid arrangement consists of a primal simplex mesh composed of triangles or tetrahedra, and an edge-based / face-based staggered dual mesh. The governing equations are discretized in conservation form. The nonlinear convective terms of the equations, as well as the viscous stress tensor and the heat flux, are discretized on the dual mesh at the aid of an explicit local ADER finite volume scheme, while the implicit pressure terms are discretized at the aid of a continuous finite element method on the nodes of the primal mesh. In the zero Mach number limit, the new scheme automatically reduces to the hybrid FV/FE approach forwarded in [1] for the incompressible Navier–Stokes equations. As such, the method is asymptotically consistent with the incompressible limit of the governing equations and can therefore be applied to flows at all Mach numbers. Due to the chosen semi-implicit discretization, the CFL restriction on the time step is only based on the magnitude of the flow velocity and not on the sound speed, hence the method is computationally efficient at low Mach numbers. In the chosen discretization, the only unknown is the scalar pressure field at the new time step. Furthermore, the resulting pressure system is symmetric and positive definite and can therefore be very efficiently solved with a matrix-free conjugate gradient method. In order to assess the capabilities of the new scheme, we show computational results for a large set of benchmark problems that range from the quasi incompressible low Mach number regime to compressible flows with shock waves.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A Biomathematical Model of Tumor Response to Radioimmunotherapy with αpDL1 and αcTLA4

  • González Crespo, Isabel
  • Gómez Caamaño, Antonio
  • López Pouso, Óscar
  • Fenwick, John D.
  • Pardo Montero, Juan
There is evidence of synergy between radiotherapy and immunotherapy. Radiotherapy can increase liberation of tumor antigens, causing activation of antitumor T-cells. This effect can be boosted with immunotherapy. Radioimmunotherapy has potential to increase tumor control rates. Biomathematical models of response to radioimmunotherapy may help on understanding of the mechanisms affecting response, and assist clinicians on the design of optimal treatment strategies. In this work we present a biomathematical model of tumor response to radioimmunotherapy. The model uses the linear-quadratic response of tumor cells to radiation (or variation of it), and builds on previous developments to include the radiation-induced immune effect. We have focused this study on the combined effect of radiotherapy and α PDL1/ α CTLA4 therapies. The model can fit preclinical data of volume dynamics and control obtained with different dose fractionations and α PDL1/ α CTLA4. A biomathematical study of optimal combination strategies suggests that a good understanding of the involved biological delays, the biokinetics of the immunotherapy drug, and the interplay between them, may be of paramount importance to design optimal radioimmunotherapy schedules. Biomathematical models like the one we present can help to interpret experimental data on the synergy between radiotherapy and immunotherapy, and to assist in the design of more effective treatments.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A model of indirect cell death caused by tumor vascular damage after high-dose radiotherapy

  • Rodríguez Barbeito, Pedro
  • Díaz Botana, Pablo
  • Gago Arias, Araceli
  • Feijoo, Manuel
  • Neira, Sara
  • Guiu Souto, Jacobo
  • López Pouso, Óscar
  • Gómez Caamaño, Antonio
  • Pardo Montero, Juan
There is increasing evidence that high doses of radiotherapy, like those delivered in stereotactic body radiotherapy (SBRT), trigger indirect mechanisms of cell death. Such effect seems to be two-fold. High doses may trigger an immune response and may cause vascular damage, leading to cell starvation and death. Development of mathematical response models, including indirect death, may help clinicians to design SBRT optimal schedules. Despite increasing experimental literature on indirect tumor cell death caused by vascular damage, efforts on modeling this effect have been limited. In this work, we present a biomathematical model of this effect. In our model, tumor oxygenation is obtained by solving the reaction–diffusion equation; radiotherapy kills tumor cells according to the linear–quadratic model, and also endothelial cells (EC), which can trigger loss of functionality of capillaries. Capillary death will affect tumor oxygenation, driving nearby tumor cells into severe hypoxia. Capillaries can recover functionality due to EC proliferation. Tumor cells entering a predetermined severe hypoxia status die according to a hypoxia-death model. This model fits recently published experimental data showing the effect of vascular damage on surviving fractions. It fits surviving fraction curves and qualitatively reproduces experimental values of percentages of functional capillaries 48 hours postirradiation, and hypoxic cells pre- and 48 hours postirradiation. This model is useful for exploring aspects of tumor and EC response to radiotherapy and constitutes a stepping stone toward modeling indirect tumor cell death caused by vascular damage and accounting for this effect during SBRT planning.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

POD–Galerkin reduced order methods for combined Navier–Stokes transport equations based on a hybrid FV-FE solver

  • Busto Ulloa, Saray
  • Stabile, Giovanni
  • Rozza, Gianluigi
  • Vázquez Cendón, María Elena
The purpose of this work is to introduce a novel POD–Galerkin strategy for the semi-implicit hybrid high order finite volume/finite element solver introduced in Bermúdez et al. (2014) and Busto et al. (2018). The interest is into the incompressible Navier–Stokes equations coupled with an additional transport equation. The full order model employed in this article makes use of staggered meshes. This feature will be conveyed to the reduced order model leading to the definition of reduced basis spaces in both meshes. The reduced order model presented herein accounts for velocity, pressure, and a transport-related variable. The pressure term at both the full order and the reduced order level is reconstructed making use of a projection method. More precisely, a Poisson equation for pressure is considered within the reduced order model. Results are verified against three-dimensional manufactured test cases. Moreover a modified version of the classical cavity test benchmark including the transport of a species is analysed.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A staggered semi-implicit hybrid FV/FE projection method for weakly compressible flows

  • Bermúdez de Castro López-Varela, Alfredo
  • Busto Ulloa, Saray
  • Dumbser, Michael
  • Ferrín González, José Luis
  • Saavedra, Laura
  • Vázquez Cendón, María Elena
In this article we present a novel staggered semi-implicit hybrid finite-volume/finite-element (FV/FE) method for the resolution of weakly compressible flows in two and three space dimensions. The pressure-based methodology introduced in [1], [2] for viscous incompressible flows is extended here to solve the compressible Navier-Stokes equations. Instead of considering the classical system including the energy conservation equation, we replace it by the pressure evolution equation written in non-conservative form. To ease the discretization of complex spatial domains, face-type unstructured staggered meshes are considered. A projection method allows the decoupling of the computation of the density and linear momentum variables from the pressure. Then, an explicit finite volume scheme is used for the resolution of the transport diffusion equations on the dual mesh, whereas the pressure system is solved implicitly by using continuous finite elements defined on the primal simplex mesh. Consequently, the CFL stability condition depends only on the flow velocity, avoiding the severe time restrictions that might be imposed by the sound velocity in the weakly compressible regime. High order of accuracy in space and time of the transport diffusion stage is attained using a local ADER (LADER) methodology. Moreover, also the CVC Kolgan-type second order in space and first order in time scheme is considered. To prevent spurious oscillations in the presence of shocks, an ENO-based reconstruction, the minmod limiter or the Barth-Jespersen limiter are employed. To show the validity and robustness of our novel staggered semi-implicit hybrid FV/FE scheme, several benchmarks are analysed, showing a good agreement with available exact solutions and numerical reference data from low Mach numbers, up to Mach numbers of the order of unity.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Mathematical analysis of a parabolic-elliptic problem with moving parabolic subdomain through a Lagrangian approach

  • Muñoz Sola, Rafael
The aim of this paper is to study the regularity of the solution of some linear parabolic-elliptic problems in which parabolicity region depends on time. More specifically, this region is the position occupied by a body undergoing a motion (a deformation smoothly evolving in time). The main tool we introduce is a suitable extension of the motion to the entire spatial domain of the PDE. This enables us to reduce the original problem to a parabolic-elliptic problem with variable coefficients and with a parabolicity region independent of time. This problem can be seen as a Lagrangian formulation of our original problem. Next, we obtain regularity results for a class of parabolic-elliptic problems with variable coefficients and fixed parabolicity region. We apply these results to the Lagrangian formulation and, finally, we obtain a regularity result for our original problem.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Direct versus iterative methods for forward-backward diffusion equations. Numerical comparisons

  • López Pouso, Óscar
  • Jumaniyazov, Nizomjon
By far, the standard implementation of finite difference schemes for forward–backward partial differential equations consists in employing an iterative method. This paper collects a series of numerical results which demonstrate that a direct implementation can reduce the computing time. An effective way of choosing the seed for the iterative method naturally arises.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Numerical simulation of natural convection and boil-off in a small size pressurized LNG storage tank

  • Ferrín González, José Luis
  • Pérez Pérez, Luis Javier
A numerical simulation of the flow of LNG stored in a small-sized cylindrical tank is presented. The main scope of this work is to characterize the heat ingress to the tank as well as the boil-off rate, depending on the filling level and the insulation layer thickness. The tank is assumed to be in a state of inactivity, such that the fluid phases are initially quiescent and are not released to the exterior. The proposed mathematical model consists of a conjugate heat transfer problem coupled with the SST turbulence model for the fluid phases. The free surface separating liquid and vapor in the tank is tracked using the Volume of Fluid method (VOF). The model is solved using the software ANSYS Fluent. It is shown that the filling level of the tank substantially influences the boiling rate and the degree of stratification, as well as the flow structures generated by free convection. The relation among the insulation thickness and total heat leak is established, showing that the obtained increased heat ingress due to lower insulation thickness values leads to a rise in pressurization and boil-off rates.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

A mathematical model of dynamics of cell populations in squamous epithelium after irradiation

  • Paga Pazos, Martín
  • López Pouso, Óscar
  • Fenwick, John D.
  • Pardo Montero, Juan
Purpose To develop multi-compartment mechanistic models of dynamics of stem and functional cell populations in epithelium after irradiation. Methods and materials: We present two models, with three (3C) and four (4C) compartments respectively. We use delay differential equations, and include accelerated proliferation, loss of division asymmetry, progressive death of abortive stem cells, and turnover of functional cells. The models are used to fit experimental data on the variations of the number of cells in mice mucosa after irradiation with 13 Gy and 20 Gy. Akaike information criteria (AIC) was used to evaluate the performance of each model. Results Both 3C and 4C models provide good fits to experimental data for 13 Gy. Fits for 20 Gy are slightly poorer and may be affected by larger uncertainties and fluctuations of experimental data. Best fits are obtained by imposing constraints on the fitting parameters, so to have values that are within experimental ranges. There is some degeneration in the fits, as different sets of parameters provide similarly good fits. Conclusions The models provide good fits to experimental data. Mechanistic approaches like this can facilitate the development of mucositis response models to nonstandard schedules/treatment combinations not covered by datasets to which phenomenological models have been fitted. Studying the dynamics of cell populations in multifraction treatments, and finding links with induced toxicity, is the next step of this work.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publication Artículo científico (JournalArticle)

Numerical simulation of gas composition tracking in a gas transportation network

  • Shabani, Mohsen
In previous papers of the authors, a new formulation for isothermal flow of gas mixtures with given constant composition in a transportation network including usual devices has been introduced and solved. However, in real networks, different gas qualities are introduced from different entry points. In this case, it is important to track the quality along the network over time and therefore a multi-species model has to be used. The main objective of the present paper is to introduce a model allowing us to simulate the evolution of the gas composition, at each point in the network and over time, and then to couple it with the flow model. The model for tracking the gas composition consists of a system of first order partial differential equations, one per pipe and per species, which are coupled together at the nodes by imposing the mass conservation equation for each species. It is important to notice that the coupling condition at the nodes guarantees that the numerical scheme conserves the mass of each species along the time. In order to validate the overall methodology, it is applied to a test case on a real network. Numerical results show good agreement with measurements
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Post-processing for spatial accuracy-enhancement of pure Lagrange–Galerkin schemes applied to convection-diffusion equations

  • Benítez, Marta
  • Cockburn, Bernardo
[Abstract]: We analyze a technique to improve the spatial accuracy, by the single application at the end of the simulation of a local post-processing, for pure Lagrange–Galerkin (PLG) methods applied to evolutionary convection-diffusion (possibly pure convection/diffusion) equations with time-dependent domains. The post-processing technique is based on a simple convolution that extracts the ‘hidden accuracy’ of Galerkin schemes, and it is used and rigorously analyzed in a fully discrete context. We prove that, when applied to the numerical solution of PLG schemes, it improves the spatial accuracy in the -norm from order to at least order ⁠, where is the degree of the polynomials defining the finite element space and any interior region of the computational domain meshed with translation-invariant meshes. For pure convection, a spatial accuracy enhancement in the -norm from order to order is obtained by post-processing the numerical solution of PLG schemes. Numerical tests are presented that confirm these theoretical results., Fondo Europeo de Desarrollo Regional (FEDER) and Xunta de Galicia (Spain) (2017 GRC GI-1563 and ED431G/01 to M.B.); FEDER and the Spanish Ministry of Economy and Competitiveness (MTM2017-86459-R to M.B.); National Science Foundation (DMS 1522657 to B.C.)., Xunta de Galicia; 2017 GRC GI-1563, Xunta de Galicia; ED431G/01, National Science Foundation; DMS 1522657
RUC. Repositorio da Universidade da Coruña
Publication Capítulo o parte de un libro (BookPart)

Contributions to the Mathematical Technology Transfer with Finite Volume Methods

  • Bermúdez, Alfredo
  • Busto, Saray
  • Cea, Luis
  • Vázquez-Cendon, M. Elena
[Abstract:] At the early 1980s, the research group in Mathematical Engineering, mat+i, started working on finite volume methods for the simulation of environmental issues concerning Galician rias (Spain). The focus was on the study of hyperbolic balance laws due to the presence of source terms related to the bathymetry. A correct treatment of these terms, an upwind discretization, was presented in [2, 7, 22]. The transfer of this knowledge has motivated the registration of the software Iber (http://www.iberaula.es). Latterly, under different research problems, we have been working on the development of a numerical algorithm for the resolution of Euler and Navier–Stokes equations. A hybrid projection finite volume/finite element method is employed making use of unstructured staggered grids (see [3, 9]). To attain second order of accuracy ADER methodology is employed [10]. On the other hand, with numerical simulation of gas transportation networks in view, a first-order well balanced finite volume scheme for the solution of a model, for the flow of a multicomponent gas in a pipe on non-flat topography, is introduced. The mathematical model consists of Euler equations, with source terms, coupled with the mass conservation equations of species. We propose a segregated scheme in which Euler and species equations are solved separately [6]., The authors are indebted to E.F. Toro, from the Laboratory of Applied Mathematics, University of Trento, for the useful discussions on the subject. This project was partially supported by Spanish MECD, grant FPU13/00279; by Xunta de Galicia, grant PRE/2013/031; by Spanish MICINN projects MTM2013-43745-R and MTM2017-86459-R; by Xunta de Galicia and FEDER under project GRC2013-014 and by Fundación Barrié; by the Reganosa company., Xunta de Galicia; PRE/2013/031, Xunta de Galicia; GRC2013-014
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Non-Eulerian Newmark Methods: A Powerful Tool for Free-Boundary Continuum Mechanics Problems

  • Benítez, Marta
  • Bermúdez, Alfredo
  • Fontán, Pedro
[Abstract]: In this paper we introduce a new procedure to solve free-surface problems based on applying the Newmark family of time integration schemes to non-Eulerian formulations of the problem (i.e., in non-current domains). The methods obtained within this framework present important advantages over other methods in literature, as for instance, that the computational domain is independent of the current unknowns, the convective term disappears, and modelling and tracking of the free surface is straightforward. Moreover, the Newmark algorithm is convenient to obtain accurate and stable methods for solving continuum mechanics models which can be written in terms of either displacement, velocity or acceleration. We consider a viscous Newtonian fluid in a time dependent domain which may undergo large deformations along the time but not topological changes of interfaces. A unified formulation providing the general framework of the proposed schemes is stated in this context. They are combined with finite elements methods for space discretization. In particular, the Newmark family of pure Lagrange–Galerkin methods is stated. The non-Eulerian formulations are advantageous to obtain linear methods. More precisely, linearized versions of the standard (non-linear) Newmark schemes that present good approximation properties are also proposed. Moreover, we deal with problems associated with high mesh distortion by proposing a reinitialization method to be applied in the non-Eulerian Newmark framework that preserves the order of convergence. In order to assess the performance of the proposed numerical methods, we solve different problems in two space dimensions., This work was partially funded by FEDER and Xunta de Galicia (Spain) under Grant 2017 GRC GI-1563 and research Project ED431G/01, and by FEDER and the Spanish Ministry of Economy and Competitiveness under research Project MTM2017-86459-R., Xunta de Galicia; 2017 GRC GI-1563, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Upwind Finite Element-PML Approximation of a Novel Linear Potential Model for Free Surface Flows Produced by a Floating Rigid Body

  • Bermúdez, Alfredo
  • Crego Martínez, Óscar
  • Prieto, A.
[Abstract] A novel linear potential model is presented to compute free surface flows of incompressible fluids produced by the motion of a floating rigid body in the presence of an underlying non-uniform flow. In particular, the proposed model enables the accurate numerical simulation of the Kelvin wake pattern in a computational domain of reduced size. The governing equations are obtained by using an Arbitrary Lagrangian Eulerian (ALE) formulation which involves the underlying velocity of the fluid around the floating body assuming flat free surface, and a non-dimensional analysis to derive the novel linear system of equations for free surface flows. The discretization of the proposed model is made by a standard Galerkin finite element method, where a SUPG-inspired upwinding strategy has been used in combination with a Perfectly Matched Layer technique which allows truncating the original unbounded fluid domain without introducing spurious reflections in the Kelvin wake pattern. The numerical simulations computed with the proposed approach are compared with the results obtained by the classical linear potential model with uniform underlying flow and also with those from the full incompressible Navier–Stokes equations equipped with the k−ω SST turbulent model. This numerical comparison is discussed in terms of a classical hydrodynamic floating body benchmark involving the Wigley hull., The first two authors have been partially supported by FSE Galicia 2014-2020 and Xunta de Galicia under grant ED481A-2018/212; by Xunta de Galicia & ERDF under grant ED431C 2021/15 and by MICINN/Agencia Estatal de Investigacin & ERDF under the research project MTM2017-86459-R. The third author has been supported by MICINN & ERDF projects MTM2017-82724-R, PID2019-108584RB-I00, and also by ED431C 2018/33 - M2NICA (Xunta de Galicia & ERDF) and ED431G 2019/01 - CITIC (Xunta de Galicia & ERDF), Xunta de Galicia; ED481A-2018/212, Xunta de Galicia; ED431C 2021/15, Xunta de Galicia; ED431C 2018/33, Xunta de Galicia; ED431G 2019/01
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A time-harmonic/time-domain hybrid approach based on displacement-based formulations to compute the absorbing coefficient in alpha cabins

  • Río-Martín, Laura
  • Prieto, A.
  • Bermúdez, Alfredo
[Abstract]: In the automotive industry, the absorption coefficient of a porous material layer is usually measured in an alpha cabin, a reverberant chamber of reduced dimensions where the operational frequency range is limited and the absorbent sample size is typically small. Those characteristics are well adapted to the requirements of automotive acoustics but far from the standard reverberant chambers used in building acoustics which ensures the conditions to perform measurements under a diffusive field. Since there are no standard norms to measure the absorption coefficient under non-diffusive fields, this work proposes a time-harmonic/time-domain hybrid approach to compute the absorption coefficient in alpha cabins. For this purpose, pointwise numerical predictions of the sound pressure level decay rate are used to calculate the absorption coefficient associated with a porous sample. To generate the pressure field acting inside the alpha cabin and, subsequently, approximate its decay rate, time-harmonic numerical simulations at a fixed frequency and a full time-dependent discretization of the wave problem have been considered. The proposed methodology is validated in a manufactured scenario where the exact solution is known in closed form. Finally, a realistic three-dimensional alpha cabin is deemed to predict the diffuse field absorption coefficient from the computed reverberation times using the proposed hybrid approach and the heuristic Sabine and Millington formulas., The first author acknowledges funding from the Spanish Ministry of Universities and the European Union-Next GenerationEU under the project RSU.UDC.MS15. The second author has been supported by MICINN & ERDF project PID2019-108584RB-I00, and also by ED431C 2018/33 - M2NICA (Xunta de Galicia & ERDF). The third author has been supported by MICINN & ERDF project research project MTM2017-86459-R, and also by GI-1563 ED431C 2021/15 (Xunta de Galicia & ERDF)., Xunta de Galicia; ED431C 2018/33, Xunta de Galicia; ED431C 2021/15