Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A tandem process for in situ H2O2 formation coupled with benzyl alcohol oxidation using Pd-Au bimetallic catalysts

  • Martínez, Jordan Santiago
  • Mazarío, Jaime
  • Galdeano-Ruano, Carmen Piedad
  • Gutiérrez-Tarriño, Silvia
  • Gaona Miguélez, José Antonio
  • Domine, Marcelo Eduardo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Alcohol oxidation is one of the most important industrial organic reactions. Traditionally, the best-suited catalysts are Pd, Pt and Au supported nanoparticles. The research community has recently started developing strategies for synthesizing carbon-supported Pd/Au bimetallic nanoparticles (NPs), leading to higher activities and selectivities. However, the metallic active species in these catalysts are usually generated using sodium borohydride (NaBH4), which is not synthetically easy to reproduce. In fact, minor modifications in pH, concentration and/or other parameters have a prominent effect on the nature of the promoted material. In this work, a robust process involving dihydrogen flow (H2) at 200 °C as a reducing agent for synthesizing Pd/Au supported bimetallic materials was considered an alternative to the common pathway. The physicochemical properties of the materials derived from different reducing reagents and of varying composition ranges were studied using HR-TEM, XRD, CO chemisorption, and XPS. Their stability and activity were also tested for benzyl alcohol oxidation to benzaldehyde under mild reaction conditions (60 °C, water as the solvent, and PO2 = 1.5 bar). Notably, a catalyst from the hydrogen reduction process with a metal composition of 0.8%Pd¿0.2%Au/C consisting of bimetallic clusters (¿1.5 nm) proved to be the best material (C = 94%, S = 99%). Catalytic performances were strongly correlated with structural properties, such as nanoparticle size and distribution, which, in turn, were affected by the reduction step and the metal composition range. Finally, the influence of oxidants on benzyl alcohol oxidation has also been studied, along with the first approach for the tandem in situ formation of H2O2 coupled with alcohol oxidation., The authors are thankful for the financial support by the Spanish Government (RTI2018-096399-A-I00 and PGC2018-097277-B-I00 funded by MICINN/AEI/10.13039/501100011033) and Junta de Andalucia (P20 01027 and PYC 20 RE 060 UAL). The electron microscopy service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainable Synthesis of Silicon Precursors Coupled with Hydrogen Delivery Based on Circular Economy via Molecular Cobalt-Based Catalysts

  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Rojas-Buzo, Sergio
  • Ortuño, Manuel A.
[EN] The development of a circular economy is a key target to reduce our dependence on fossil fuels and create more sustainable processes. Concerning hydrogen as an energy vector, the use of liquid organic hydrogen carriers is a promising strategy, but most of them present limitations for hydrogen release, such as harsh reaction conditions, poor recyclability, and low-value byproducts. Herein, we present a novel sustainable methodology to produce value-added silicon precursors and concomitant hydrogen via dehydrogenative coupling by using an air- and water-stable cobalt-based catalyst synthesized from dieap and commercially available starting materials. This methodology is applied to the one-pot synthesis of a wide range of alkoxy- substituted silanes using different hydrosilanes and terminal alkenes as reactants in alcohols as green solvents under mild reaction conditions (room temperature and 0.1 mol % cobalt loading). We also demonstrate that the selectivity toward hydrosilylation/hydroalkoxysilylation can be fully controlled by varying the alcohol/water ratio. This implies the development of a circular approach for hydrosilylation/hydroalkoxysilylation reactions, which is unprecedented in this research field up to date. Kinetic and in situ spectroscopic studies (electron paramagnetic resonance, nuclear magnetic resonance, and electrospray ionization mass spectrometry), together with density functional theory simulations, further provide a detailed mechanistic picture of the dehydrogenative coupling and subsequent hydrosilylation. Finally, we illustrate the application of our catalytic system in the synthesis of an industrially relevant polymer precursor coupled with the production of green hydrogen on demand., This work has received financial support from Spanish Government (RTI2018-096399-A-I00 and PID2020-119116RA-I00), Junta de Andalucia (P20_01027 and PYC 20 RE 060 UAL), Xunta Distinguished Researcher program (ED431H 2020/21), the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2019-2022, ED431G 2019/03), and the European Union (European Regional Development Fund, ERDF). S.R.-B. acknowledges the Margarita Salas grant financed by Ministerio de Universidades, Spain, and funded by the European Union-Next Generation EU. M.A.O. acknowledges CESGA ("Centro de Super-computacion de Galicia") for providing generous computa-tional resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selective design of MOF-derived electrocatalytic interphases by potential-driven surface reconstruction

  • Hernández-Salvador, S
  • Márquez, Inmaculada
  • Calvente, Juan José
  • Río-Rodríguez, José Luis del
  • Andreu, Rafael
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic frameworks (MOFs) can be used as precursors for the directed synthesis of derived materials with enhanced performance for electrocatalysis. Herein, we report on an in-situ electrochemical strategy for the selective synthesis of hybrid electrocatalysts using a cobalt MOF (2D-CoMOF) as a precursor for constructing electrochemical sensors to monitor the glucose oxidation reaction (GOR). By using in-situ Raman spectroelectrochemistry, it is demonstrated that a precise control of the applied potential during amperometric treatment of 2D-CoMOF can promote the generation of derived heterostructures in which the original MOF coexists with metal oxides and/or oxyhydroxides (MOF-MOx) with different compositions. The so-prepared electrodes exhibit high electroactive surface areas, a high number of electrocatalytically active cobalt sites and an efficient charge transport across the catalytic film. Moreover, their composition-dependent electrocatalytic performance for the glucose oxidation reaction is examined, establishing a relationship between the applied potential, the macroscopic chemical composition of the heterostructure and the electrocatalytic performance for glucose sensing. In particular, the hybrid phases consisting of Co-MOF/Co3O4/CoOOH display superior electrocatalytic sensing performance with a wide linear concentration range and high sensitivity. The present work emphasizes the significance that the precise control of the applied potential has on the electrochemically-assisted MOF transformation for developing highly efficient MOF-derived electrocatalysts., Authors thank the financial support by the grants PID2021-126799NB-I00 and PID2022-140111OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU, TED2021-130191B-C41, TED2021-130191B-C42 and RED2022-134120-T funded by MICIU/AEI/ 10.13039/501100011033 and ERDF A way for making Europe, and European Union Next Generation EU/PRTR. Authors acknowledge funding from Junta de Andalucía (P20 01027 and PYC 20 RE 060 UAL. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). S.G.T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID10-23. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Portorreal-Bottier, Arismendy
  • Trasobares, Susana
  • Calvente, Juan José
  • Calvino, Juan José
  • Olloqui-Sariego, José Luis
[EN] Metal-organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co-MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface--exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential-induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical acti-vation at neutral pH of a Co-MOF for boosting the electrocatalytic water oxidation reaction., Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2020-113006-RB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42 and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033) and Junta de Andalucia (P20-01027 and PYC 20 RE 060 UAL). The authors acknowledge funding from the European Union's Horizon 2020 research and innovation program under Grant 823717-ESTEEM3. Electron microscopy studies were performed at the DME-UCA node of the Spanish Unique Infrastructure (ICTS) on Electron Microscopy of Materials ELECMI. The authors thank Dr. A. Raya-Baron for his support on this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enzyme-like activity of cobalt-MOF nanosheets for hydrogen peroxide electrochemical sensing

  • Portorreal-Bottier, Arismendy
  • Calvente, Juan José
  • Andreu, Rafael
  • Roldán, Emilio
  • Olloqui-Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic frameworks (MOFs) are receiving increased attention as new functional nanomaterials for the development of electrochemical sensors. Herein, we develop an electrochemical platform for non-enzymatic hydrogen peroxide detection built with a composite of two-dimensional cobal t MOF nanosheets and Nafion (2D-Co-MOF@Nafion). The feasibility of the 2D-Co-MOF@Nafion composite as active material for high perfor-mance hydrogen peroxide sensor was investigated by usin g cyclic voltammetr y and chronoamperometry. Its voltammetric response reveals an efficient charge transport through the MOF composite, and rapid electron exchange between MOF and electrode. Notably, these MOF nanosheets exhibit enzyme-like activity for the non-common catalytic oxidation of hydrogen peroxide, leadin g to an electrochemical sensor with rapid quantitative detection, outstanding sensitivity, selectivity, stability, and durability at the desirable neutral pH. In particular, for a cobal t metal loading of 1.2 nanomol, the sensor yields amperometric H2O2 detection with characteristic electrocatalytic parameters ofima x = 5.7 mA cm(-2)andKM= 13 mM. Moreover, linear ranges of up to either 1 mM or 10 mM are achieved, with sensitivities as high as 570 +/-; 5 A cm(-2) mM(-1) or 395 +/- 10 A cm(-2) mM(-1) for the low and high concentration ranges, respectively. The particular coordination chemistr y of the MOF consisting of a regular arrangement of multiple Co(II) redox metal sites connected by appropriate organic ligands can provide inherent enzyme-mimicking properties, thereby explaining the higher oxidase-like activit y of the present MOF. This work raises the new idea of using two-dimensional cobalt-based MOFs as active nanozymes, offering exciting opportunities in the design of non-enzymatic electrochemical sensing devices., Acknowledgments Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00) and Junta de Andalucia (P20_01027 and PYC 20 RE 060 UAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Controlled formation of CoOOH/Co(III)-MOF active phase for boosting electrocatalytic alkaline water oxidation

  • Márquez, Inmaculada
  • Portorreal-Bottier, Arismendy
  • Río-Rodríguez, José Luis del
  • Hernández-Salvador, S.
  • Calvente, Juan José
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Surface reconstituted metal-organic frameworks (MOFs) offer appealing properties for electrocatalysis due to their unique structural and compositional advantages. In this work, a controlled potential-induced reconstruction of a two-dimensional cobalt metal-organic framework for boosting oxygen evolution reaction in alkaline media is reported. The current MOF is shown to undergo a partial structural transformation that generates a heterogeneous system, where the original MOF coexists with an oxyhydroxide phase. In fact, the potential-induced stabilization of Co(III) metal centers in the MOF is crucial for delaying its full degradation in alkaline media. This partial retention of the Co(III)MOF phase in the so-derived heterogeneous catalyst has been demonstrated to be decisive for boosting the alkaline electrocatalytic oxygen evolution reaction (OER), displaying superior OER activity in terms of both thermodynamic and kinetic merits compared to the benchmark IrO(2 )and RuO2 electrocatalysts and the prototypical cobalt (oxy)hydroxides, with a Tafel slope of 52 mV dec(- 1) and a turnover frequency (TOF) of 6.8 s(- 1) at 450 mV. Remarkably, the generated final product is stable, exhibiting high robustness and long durability for long-term OER electrolysis. This work provides new insight into the impact of the reconstruction of a MOF for alkaline OER under typical electrochemical conditions, which ultimately benefits the rational design of MOF-based catalysts with high electrocatalytic activity for oxidation reactions., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Authors thank the financial support by the grants (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way for making Europe, and European Union NextGenerationEU/PRTR) . Authors acknowledge funding from Junta de Andalucia (P20 01027 and PYC 20 RE 060 UAL) . J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ultra-low metal loading rhodium phosphide electrode for efficient alkaline hydrogen evolution reaction

  • Galdeano-Ruano, Carmen Piedad
  • Márquez, Inmaculada
  • Lopes, Christian Wittee
  • Calvente, Juan Jose
  • Agostini, Giovanni
  • Roldan, Alberto
  • Olloqui-Sariego, Jose Luis
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The practical production of hydrogen from water electrolyzers demands efficient electrocatalysts with maximized and optimized active sites that promote the Hydrogen Evolution Reaction (HER) at wide pH ranges. Herein, we successfully synthesized a rhodium-based nanomaterial with extremely low metal loading (2 mu g/cm(-2)) as electrocatalyst for the HER. In particular, the material consists of carbon-supported rhodium phosphide (Rh2P) as active sites, which are partially covered with carbon patches. The so-developed nanomaterial exhibits high crystallinity, resistance to sintering, and outstanding electrocatalytic activity and operational stability in an extended pH interval. Notably, Rh2P displays specific-mass activities, ca. 2.5- and 5-fold higher than those of the benchmark 20 wt% Pt/C at an overpotential of 50 mV in acidic and alkaline media, respectively. Comparison of the electrocatalytic performance of the current Rh2P electrocatalyst with those of phosphorus-free rhodium NPs and an alternative rhodium phosphide nanomaterial, reveals that the inclusion of phosphorus atoms, the purity and crystallinity of the Rh2P phase are critical to boost the electrocatalytic HER. This is corroborated by theoretical simulations using DFT, which also prove that the presence of C-patches on Rh2P favors the H2O dissociation during HER electrocatalytic cycle and prevents phosphorous leaching. Overall, this work provides new insights for the rational design and controlled synthesis of small NPs for using as efficient electrocatalysts in hydrogen-based renewable energy devices. (c) 2023 The Authors. Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/)., CGR thanks toMINECO for her FPU Ph.D. contract FPU17/04172. CWL thanks the PRH 50.1 e ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. These experiments were performed at CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff. S. Guti~errez-Tarri~no, J. S. Martinez, A. Garci ' a-Zaragoza and W. Henao are acknowledged for their assistance with XAS data acquisition. Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2021-126799NB-I00, TED2021130191B-C41, supported by MCIN/AEI/10.13039/501100011033 and by Uni~on Europea NextGenerationEU/PRTR, and TED2021130191B-C42), Junta de Andaluci ' a (P20_01027 and PYC 20 RE 060 UAL) and Generalitat Valenciana (MFA/2022/047, Advanced Materials programme, which was supported by MCIN with funding fromEuropean Union NextGeneration EU PRTR-C17.I1 and Generalitat Valenciana). We are thankful for the Electron Microscopy Service of the UPV for TEM facilities. We also acknowledge Supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez Tarriño, Silvia
  • Portorreal Bottier, Arismendy
  • Calvente, Juan José
  • Olloqui Sariego, José Luis
  • Oña Burgos, Pascual
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
Metal–organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co–MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface–exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential–induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical activation at neutral pH of a Co–MOF for boosting the electrocatalytic water oxidation reaction, 9 páginas