Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Use of a voltammetric electronic tongue for predicting levels of nerve agent mimics

  • Campos Sánchez, Inmaculada
  • Soto Camino, Juan
  • Gil Sánchez, Luís|||0000-0003-3453-5559
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Vivancos, José-Luis|||0000-0002-8524-5466
[EN] An electronic tongue (ET) based on pulse voltammetry containing a set of eight metallic electrodes (Au, Pt, Ir, Rh, Cu, Co, Ni and Ag) encapsulated on a stainless steel cylinder has been used to discriminate and predict levels of nerve agent mimics in aqueous environments. Analysis including principal component analysis (PCA) and partial least square techniques (PLS) have been applied for data management and prediction models. A good discrimination from other organophosphorous derivatives was found for the nerve agent simulants diethyl-chlorophosphate (DCP) and diethyl-cyanophosphate (DCNP)., We thank the Ministerio de Ciencia y Tecnologia (project CTQ2006-15456-C04-01), and Universidad Politecnica de Valencia (project PAID-06-07-3243) for support. I.C. thanks the Universidad Politecnica de Valencia for a Doctoral Fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Obtención del Espectro Primario de Rayos X con los Códigos PENELOPE Y MCNPS

  • Pozuelo, Fausto
  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] Conocer el espectro primario de rayos X es muy importante en el Control de Calidad de los tubos de rayos X, ya que permite conocer mejor, y por tanto reducir, la dosis impartida a los pacientes. Sin embargo, obtener el espectro primario resulta complicado para los controles rutinarios, de ahí que se midan los parámetros de calidad del espectro, en lugar de obtener su espectro primario. En este caso, se utilizan los códigos PENELOPE y MCNP5, basados en el método Monte Carlo, para obtener el espectro de rayos X teniendo en cuenta las características del tubo de rayos X. Con el fin de conseguir un mayor ajuste del espectro simulado al teórico, se ha realizado un análisis de sensibilidad de los parámetros disponibles en ambos códigos. La obtención del espectro simulado podría suponer una mejora dentro del control de calidad de los tubos de rayos X al incorporarlo como un método complementario a las técnicas utilizadas. Los espectros simulados se han comparado con sus respectivos teóricos, extraídos del catalogo IPEM-78, mediante el cálculo del error cuadrático mínimo y los parámetros de calidad del espectro como la capa de hemirreducción. Esta comparación permite determinar que la simulación obtenida es aceptable. Del análisis de sensibilidad realizado con el código PENELOPE se ha obtenido que el parámetro FORCE es una de las variables más importantes para conseguir un buen ajuste entre el espectro simulado y el teórico. La elección de su valor debe ser óptima, de modo que se obtenga un buen ajuste al espectro teórico con un tiempo de computación aceptable. Los resultados obtenidos demuestran que para conseguir un mejor ajuste es necesario un valor alto de FORCE, sin embargo esto aumenta el tiempo de computación. Por otra parte, se ha observado que con un valor bajo de este parámetro no se obtienen importantes diferencias en cuanto a la dosis en profundidad y si se consigue disminuir el tiempo de computación., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GVPRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of the Tikhonov unfolding method for reconstruction of primary X-ray spectra from X-ray equipments

  • Querol, A.
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
This work has been partially supported by the V alencian Region Govermnent under project Grant GVPRE/2008/136, and the Universidad Politécnica de Valencia under project PAID-06-07-3300.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spray droplet velocity characterization for convergent nozzles with three different diameters

  • Payri, Raul|||0000-0001-7428-5510
  • Tormos, B.|||0000-0002-8852-3783
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Araneo, L.
[EN] The core of the present work consists of the phase-Doppler anemometry non-intrusive measurements performed at various points of diesel direct injection sprays in order to obtain the local speed of fuel droplets. The main objective was to perform extensive sets of measurements on convergent nozzles with various orifices diameters, observe and justify the differences and compare the experimental data with a theoretical approach derived by the authors in a previous work which takes into account the spray momentum flux. Experimental axial velocity profiles in different sections of the spray showed a radial distribution that was fitted with a high level of agreement to a Gaussian profile and so proving that this type of profile is a reasonable approach for the type of sprays within the scope of the present work. The experimental results showed that the velocity in the spray's axis inversely depends on axial position and that for a given axial position; higher axial velocity has been measured for the nozzles with higher spray momentum. (c) 2008 Elsevier Ltd. All rights reserved., This research has been funded by "Vicerrectorado de Innovacion, Desarrollo e Innovacion de la Universidad Politecnica de Valencia" in the frame of the Project "Estudio del flujo en el interior de toberas de inyeccion Diesel", Reference No. 3150
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement on the bound of Hermite matrix polynomials

  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
  • Sastre, Jorge|||0000-0002-8612-6717
In this paper, we introduce an improved bound on the 2-norm of Hermite matrix polynomials. As a consequence, this estimate enables us to present and prove a matrix version of the Riemann-Lebesgue lemma for Fourier transforms. Finally, our theoretical results are used to develop a novel procedure for the computation of matrix exponentials with a priori bounds. A numerical example for a test matrix is provided. © 2010 Elsevier Inc. All rights reserved., This work has been partially supported by the Universidad Politecnica de Valencia under project PAID-06-07/3283 and the Generalitat Valenciana under project GVPRE/2008/340.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

LinkEHR-Ed: A multi-reference model archetype editor based on formal semantics

  • Maldonado Segura, José Alberto
  • Moner Cano, David
  • Boscá Tomás, Diego
  • Fernandez Breis, Jesualdo Tomas
  • Angulo Fernández, Carlos
  • Robles Viejo, Montserrat
Purpose To develop a powerful archetype editing framework capable of handling multiple reference models and oriented towards the semantic description and standardization of legacy data. Methods The main prerequisite for implementing tools providing enhanced support for archetypes is the clear specification of archetype semantics. We propose a formalization of the definition section of archetypes based on types over tree-structured data. It covers the specialization of archetypes, the relationship between reference models and archetypes and conformance of data instances to archetypes. Results LinkEHR-Ed, a visual archetype editor based on the former formalization with advanced processing capabilities that supports multiple reference models, the editing and semantic validation of archetypes, the specification of mappings to data sources, and the automatic generation of data transformation scripts, is developed. Conclusions LinkEHR-Ed is a useful tool for building, processing and validating archetypes based on any reference model., This work was supported in part by the Spanish Ministry of Education and Science under grant TS12007-66S7S-C02; by the Generalitat Valenciana under grant APOSTD/2007/055 and by the program PAID-06-07 de la Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diagnosis of rotor asymmetries in induction motors based on the transient extraction of fault components using filtering techniques

  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Rusek, Jan
  • Roger-Folch, José
[EN] The aim of this paper is to present and validate a methodology for diagnosing rotor asymmetries in cage motors, based on the analysis of the stator startup current. The method consists of the extraction of a harmonic component introduced by this fault - the left sideband component - from the stator startup current. Two alternative techniques developed by different research groups are proposed for the transient extraction of this component; the digital low-pass filtering (DLPF) and the discrete wavelet transform (DWT). Both approaches are applied to three different industrial motors ranging from 1.1 to 450kW. A detailed explanation of the physical basis of the method and comments related to the application scope of the approach are also given. The results show the robustness of both approaches for the reliable diagnosis of the fault and suggest a clear potentiality for extending the methodology to the detection of other types of faults introducing components dependant on the slip. (C) 2009 Elsevier B.V. All rights reserved., This work was supported by the Spanish “Ministerio de Educación y Ciencia”, in the framework of the “Programa Nacional de proyectos de Investigación Fundamental”, project reference DPI2008-06583/DPI. The authors also thank ‘Vicerrectorado de Investigación, Desarrollo e Innovación of Universidad Politécnica de Valencia’ for financing a part of this research through the program ‘Programa de Apoyo a la Investigación y Desarrollo’ (PAID-06-07).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Reconstrucción del Espectro De Rayos X con Flat Panel, Cuña de Pmma y el Método Monte Carlo

  • Pozuelo, Fausto
  • Querol Vives, Andrea
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] La obtención del espectro primario de rayos X permite determinar la calidad de un haz de fotones producido por un tubo de rayos X, ya que las características dosimétricas de un haz de radiación tienen una relación directa con el espectro primario de rayos X. En este trabajo se estudian las curvas de dosis en profundidad obtenidas dentro del intervalo energético de radiodiagnóstico, entre 40 y 130 keV. La metodología seguida en el trabajo se basa en la reconstrucción del espectro mediante métodos matemáticos a partir de la curva de dosis en profundidad en una cuña de metacrilato y recogida en un flat panel. La reconstrucción del espectro podría suponer una mejora dentro de los controles de calidad de tubos de rayos X al permitir una estimación, más próxima a la real, de la dosis impartida a los pacientes. Existe una estrecha relación entre la curva de dosis en profundidad en el eje central de la cuña de metacrilato y el haz de fotones emitido por el tubo de rayos X. Dicha relación, se basa en la teoría de que la curva de dosis en profundidad puede expresarse como la superposición lineal de las contribuciones de un continuo de haces de fotones monoenergéticos, cada uno ponderado por la fluencia de fotones en cada rango de energía. Los distintos métodos inversos utilizados permiten mejorar la precisión con la que los espectros son obtenidos. Estas técnicas han sido aplicadas a los resultados de dosis obtenidos mediante simulación utilizando los programas basados en el método de Monte Carlo, PENELOPE y MCNP5. Los resultados de las curvas de dosis en profundidad simulados se han comparado con los resultados experimentales estudiando la influencia en la dosis suministrada al paciente debida a los métodos de simulación. Para ello se ha calculado el error cuadrático medio en ambos casos., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GVPRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Water Temperature Model to Assess Impact of Riparian Vegetation on Jucar River and Spain

  • Miñana-Albanell, Carlos
  • Ryu, Dongryeol
  • Pérez-Martín, Miguel Ángel|||0000-0002-4733-0862
[EN] Water temperature is a critical factor for aquatic ecosystems, influencing both chemical and biological processes, such as fish growth and mortality; consequently, river and lake ecosystems are sensitive to climate change (CC). Currently proposed CC scenarios indicate that air temperature for the Mediterranean Jucar River will increase higher in summer, 4.7 degrees C (SSP5-8.5), resulting in a river water temperature increase in the hotter month; July, 2.8 degrees C (SSP5-8.5). This will have an impact on ecosystems, significantly reducing, fragmenting, or even eliminating natural cold-water species habitats, such as common trout. This study consists of developing a simulated model that relates the temperature of the river with the shadow generated by the riverside vegetation. The model input data are air temperature, solar radiation, and river depth. The model proposed only has one parameter, the shadow river percentage. The model was calibrated in a representative stretch of the Mediterranean river, obtaining a 0.93 Nash-Sutcliffe efficiency coefficient (NSE) that indicates a very good model fit, a 0.90 Kling-Gupta efficiency index (KGE), and a relative bias of 0.04. The model was also validated on two other stretches of the same river. The results show that each 10% increase in the number of shadows can reduce the river water temperature by 1.2 degrees C and, in the stretch applied, increasing shadows from the current status of 62% to 76-87% can compensate for the air temperature increase by CC. Generating shaded areas in river restorations will be one of the main measures to compensate for the rise in water temperature due to climate change.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transient detection of eccentricity-related components in induction motors through the Hilbert-Huang Transform

  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Jover Rodríguez, Pedro Vicente
  • Arkkio, Antero
  • Roger-Folch, José
  • Pérez, R.B.
[EN] The identification and extraction of characteristic patterns are proposed in this work for the diagnosis and evaluation of mixed eccentricities in induction electrical machines with parallel stator branches. Whereas the classical diagnosis approaches, deeply spread in the industrial environment, are based on the Fourier analysis of the steady-state current, the basis of the proposed methodology consist of analysing the current demanded by the machine during the connection process (startup transient); the objective is to extract the characteristic evolution during the transient of some harmonic components created by the fault; this evolution is caused by the dependence of these components on the slip (s), a quantity varying during the startup transient from 1 to almost 0. For this feature extraction. the Hilbert-Huang Transform (HHT) is proposed. An analysis of the-behaviour of this transform in comparison with another time-frequency approach used in other works, the Discrete Wavelet Transform (DWT), is also presented in the paper. The results show the usefulness of the methodology for the reliable diagnosis of the mixed eccentricity fault and for the correct discrimination against other types of failures. (C) 2009 Elsevier Ltd. All rights reserved., The research leading to these results has received funding from the European Community's Seventh Framework Programme FP7/2007-2013 under Grant Agreement no. 224233 (Research Project PRODI "Power plant Robustification based on fault Detection and Isolation algorithms"). The authors also thank Vicerrectorado de Investigacion, Desarrollo e Innovacion of Universidad Politecnica de Valencia for financing a part of this research through the program Programa de Apoyo a la Investigacion y Desarrollo (PAID-06-07).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of the Monte Carlo codes PENELOPE and MCNP5 to unfold X-ray spectra in the diagnostic energy range

  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Querol Vives, Andrea
  • Pozuelo Navarro, Fausto
Obtaining primary X-ray spectra is a complex task mainly due to the high fluence of X-rays. In order to avoid the pile up effect in the detector, an indirect method based on the Compton scattering interactions in a low density rod material can be successfully applied in the diagnostic energy range. In this work, the Monte Carlo codes PENELOPE and MCNP5 have been used to simulate the indirect method based on a simplified Compton spectrometry technique. Both models include the X-ray focus, a poly(mehtylmethacrylate) (PMMA) rod and an HPGe detector. Because the probability that primary photons scattered in the PMMA will be emitted towards the detector is small, it is necessary to consider appropriate values for cut-offs and other simulation parameters. With these models, a response function can be determined, relating the response of the detector to the primary X-ray spectrum. This function can be normally expressed as a matrix, which can be calculated by simulating the response detector to several monochromatic X-ray beams. The main goal of this work is to test the capability of the Monte Carlo codes PENELOPE and MCNP5 together with unfolding methods to estimate the primary spectrum when the response matrix and the response of the detector for a given conditions are known. The reliability of unfolded X-ray spectra is studied by comparing them with theoretical spectra obtained from the IPEM 78 catalogue and calculating the Root Mean Squared (RMS) and Quality parameters., This work was partially supported by the Grant-in-Aid for Scientific Research of Ministry of Education, Spain. Grant number: AP2009-2600, Project leader: Professor Gumersindo Verdu, Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Feature Extraction for the Prognosis of Electromechanical Faults in Electrical Machines through the DWT

  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Pons Llinares, Joan|||0000-0003-3756-1242
  • Puche-Panadero, Rubén|||0000-0003-2090-1941
  • Pérez-Cruz, Juan
[EN] Recognition of characteristic patterns is proposed in this paper in order to diagnose the presence of electromechanical faults in induction electrical machines. Two common faults are considered; broken rotor bars and mixed eccentricities. The presence of these faults leads to the appearance of frequency components following a very characteristic evolution during the startup transient. The identification and extraction of these characteristic patterns through the Discrete Wavelet Transform (DWT) have been proven to be a reliable methodology for diagnosing the presence of these faults, showing certain advantages in comparison with the classical FFT analysis of the steady-state current. In the paper, a compilation of healthy and faulty cases are presented; they confirm the validity of the approach for the correct diagnosis of a wide range of electromechanical faults., The research leading to these results has received funding from the European Community's Seventh Framework Programme FP7/2007-2013 under Grant Agreement n° 224233 (Research Project PRODI “Power plant Robustification based on fault Detection and Isolation algorithms”). The authors also thank ‘Vicerrectorado de Investigación, Desarrollo e Innovación of Universidad Politécnica de Valencia’ for financing a part of this research through the program ‘Programa de Apoyo a la Investigación y Desarrollo (PAID-06-07).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A critical comparison between DWT and Hilbert-Huang-based methods for the diagnosis of rotor bar failures in induction machines

  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Pérez, Rafael B.
[EN] In this paper, a cutting-edge time-frequency decomposition tool, i.e., the Hilbert-Huang transform (HHT), is applied to the stator startup current to diagnose the presence of rotor asymmetries in induction machines. The objective is to extract the evolution during the startup transient of the left sideband harmonic (LSH) caused by the asymmetry, which constitutes a reliable evidence of the presence of the fault. The validity of the diagnosis methodology is assessed through several tests developed using real experimental signals. Moreover, in this paper, an analytical comparison with an alternative time-frequency decomposition tool, i.e., the discrete wavelet transform (DWT), is carried out. This tool was applied in previous works to the transient extraction of fault-related components, with satisfactory results, even in cases in which the classical Fourier approach does not lead to correct results. The results of the application of the HHT and DWT are analyzed and compared, obtaining novel conclusions about their respective suitability for the transient extraction of asymmetry-related components, as well as the equivalence, with regard to the LSH extraction, between their basic components, namely: 1) intrinsic mode function, for the HHT, and 2) approximation signal for the DWT., This work was supported in part by the Spanish “Ministerio de Educación y Ciencia,” in the framework of the “Programa Nacional de proyectos de Investigación Fundamental,” project reference DPI2008-06583/DPI and in part by “Vicerrectorado de Investigación, Desarrollo e Innovación of the Universidad Politécnica de Valencia” through the Programa de Apoyo a la Investigación y Desarrollo under Contract PAID-06-07.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Detection of combined faults in induction machines with stator parallel branches through the DWT of the startup current

  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Jover Rodriguez, P.
  • Arkkio, A.
[EN] The main objective of this paper is to diagnose the presence of combined faults in induction machines. For this purpose, a methodology based on the application of the Discrete Wavelet Transform (DWT) to the stator startup current is used. This approach was applied in previous works with success to the diagnosis of rotor asymmetries and mixed eccentricities in motors with different sizes and conditions. However, as most of the diagnosis methods hitherto developed, the application of the proposed approach was circumscribed to situations in which a single fault was present in the machine. In addition, the influence of other phenomena such as load torque oscillations or voltage fluctuations was studied, but without considering the combination of these phenomena and the fault in the machine. This work is intended, first, to apply the proposed transient-based methodology to several cases in which different faults (rotor asymmetries, mixed eccentricities and inter-turn and inter-coil stator short-circuits) are simultaneously present in the machine and, second, to apply it to cases regarding faults combined with other phenomena making difficult the diagnosis, such as load torque oscillations. Interesting considerations regarding the preponderance of the effects of some of the faults are also done in the paper. The application of the methodology is focused on induction machines with stator parallel branches; in this sense, the suitability of the use either of the phase current or of the branch current for the diagnosis of each particular fault is analysed. The results look promising with regard to the validity of the methodology for the reliable discrimination of simultaneous electromechanical faults and the diagnosis of faults combined with other phenomena. (C) 2009 Elsevier Ltd. All rights reserved., This work was supported by the Conselleria d'Educacio, Formacio i Ocupacio of the Generalitat Valenciana, in the framework of the "Ayudas para la Realizacion de Proyectos de I + D para Grupos de Investigacion Emergentes", project reference GV/2012/020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Parametric study of the X-ray primary spectra obtained with the MTSVD unfolding method

  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
The Modified Truncated Singular Value Decomposition (MTSVD) unfolding method is applied to obtain primary spectra for X-ray tubes in radiodiagnostic. Three parameters - voltage, anode angle and filter thickness- of the tube are tested. Unfolded spectra are compared with theoretical extracted from IPEM-78 catalogue. A 2σ error criterion is applied to assess the minimum variations in tested parameters that permits distinguishing between close spectra., This work has been partially supported by the Valencian Region Government under project Grant GVPRE/2008/136 and the Universidad Politecnica de Valencia under project PAID 06-07-3300.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of the MTSVD unfolding method for reconstruction of primary X-ray spectra using semiconductor detectors

  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Querol Vives, Andrea
[EN] A thorough knowledge of the primary spectrum is very important to perform a quality control (QC) of X-ray tubes. In previous works, a methodology to assess primary spectrum using a Compton spectrometer and applying the Monte Carlo (MC) method has been analyzed. By means of a Monte Carlo model, a response matrix can be built, relating the Pulse Height Distribution (PHD) recorded in the detector to the primary X-ray spectrum. Subsequently, an unfolding method based on the application of a Modified Truncated Singular Value Decomposition (MTSVD) is applied to the response matrix to assess the primary spectrum. Germanium (Ge), Silicon (Si) and Cadmium-Telluride (CdTe) detectors are considered in this work. The main goal of the paper is to determine whether the MTSVD unfolding method is adequate to provide an acceptable reproduction of spectra for these detectors., This work has been partially supported by Valencian Region Government under project Grant GVPRE/2008/136, and Universidad Politécnica de Valencia under project PAID-06-07-3300.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reverse osmosis concentration of press liquid from orange juice solid wastes:flux decline mechanisms

  • Garcia-Castello, Esperanza M.
  • Mayor López, Luis
  • Chorques, S.
  • Vidal Brotons, Daniel José
  • Argüelles Foix, Angel Luís|||0000-0001-5320-7011
  • Gras Romero, María Luisa
Orange juice production produces high amount of solid waste. An alternative for these wastes is their pressing with lime to obtain a press liquor stream and a dried solid for cattle feeding. The press liquor (around 10 °Brix) is traditionally concentrated up to 70 °Brix (citrus molasses) by multiple effect evaporation. In this investigation, reverse osmosis is evaluated as an alternative for press liquor preconcentration. Two synthetic feed solutions were studied, one included pectin in its composition (WP) and the other lacked pectin (WOP) to simulate a previous depectinization of WP. The concentration process was evaluated in terms of some selected parameters (chemical oxygen demand, total soluble solids, total dissolved solids and osmotic pressure). The fouling mechanism as well as the membrane resistance to the permeate pass were assessed. It was found that for later stages of concentration cake filtration was the dominant fouling mechanism while for earlier stages, the mechanism found was the complete pore blocking. The presence of pectin not only maximized the membrane fouling but also led to worse permeate quality. © 2011 Elsevier Ltd. All rights reserved., Authors acknoweledge the Universidad Politecnica de Valencia for the financial support from the call "Primeros Proyectos de Investigacion (PAID-06-07)" included in the funding program "Programas de Apoyo a la Investigacion I+D+i". Authors also acknowledge Dr. Juan Francisco Asturiano Nemesio, from the "Grupo de Acuicultura y Biodiversidad, Institut de Ciencia y Tecnologia Animal" at the Universidad Politecnica de Valencia for his help in the osmotic pressure measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Análisis de incertidumbres en la Simulación de Rayos X utilizando MCNP5

  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] La caracterización del espectro primario de rayos X supone una herramienta muy útil para el Control de Calidad (QC) de los equipos de radiodiagnóstico, ya que permite una mejor estimación de la dosis recibida por el paciente, así como una mejor calidad de imagen. En este trabajo, se ha desarrollado un modelo de Monte Carlo, con el programa MCNP5, para simular espectros de rayos X a partir de una fuente de electrones y las características de un tubo de rayos X comercial. Los espectros obtenidos se han comparado con los espectros extraídos del catálogo IPEM 78 para validar el modelo de simulación de MCNP5. Además, se ha estudiado la incertidumbre asociada a los parámetros geométricos del modelo del tubo de rayos X y sus efectos en los espectros simulados utilizando la fórmula de Noether‐Wilks. Los parámetros del tubo que se han estudiado son el espesor de los colimadores, los filtros, el blindaje y el obturador de barrilete. A la vista de los resultados, se puede concluir que para los cálculos de MCNP5 la incertidumbre debida a los parámetros geométricos es más relevante que la estadística asociada al propio método., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GV PRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.