Skip to main content

SISTEMAS FOTOCATALITICOS MULTIFUNCIONALES 3D PARA TECNOLOGIAS SOSTENIBLES AMIGABLES CON EL MEDIOAMBIENTE

PCI2020-111968

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos Programación Conjunta Internacional
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of Porosity and Surface Chemistry on CO2 and CH4 Adsorption in S-Doped and S-/O-co-Doped Porous Carbons

  • Reljic, Snezana
  • Martinez-Escandell, Manuel
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
The aim of this study was to determine the adsorption performance of a petroleum pitch-based activated carbon (PPAC1:3) before and after a post-treatment with H2S. In the first step, a microporous activated carbon (PPAC1:3) with a highly developed porous structure was produced through a chemical activation route with KOH. Afterward, the synthesized activated carbon was thermally treated yielding two different series of functionalized activated carbons: (i) a series of carbons were treated directly with H2S at elevated temperatures (600 °C and 800 °C), and (ii) a series of carbons were generated by combining an oxidation treatment with plasma followed by H2S treatment at elevated temperatures (600 °C and 800 °C). The chemical and structural characteristics of the S-doped and S-/O-co-doped porous carbons were investigated by means of different experimental techniques, such as XRD, RAMAN, FESEM, XPS, TPD, N2, and CO2 adsorption, and finally tested in CO2 and CH4 adsorption at atmospheric and high pressure. The functionalized porous carbons possessed specific surface areas of 2420–2690 m2/g, total pore volume of 1.05–1.18 cm3/g, and sulfur content up to 2.55 atom % (the sulfur content of the original carbon was 0.19%). After a careful analysis of the carbon dioxide and methane uptake at atmospheric (0.1 MPa) and high pressure (4 MPa), adsorption results confirm that the microporous structure is the main structural parameter defining the adsorption performance and, to a lower extent, the surface chemistry. Overall, a significant improvement in the total uptake can be appreciated after the H2S treatment.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Carbon-based monoliths with improved thermal and mechanical properties for methane storage

  • Reljic, Snezana
  • Cuadrado-Collados, Carlos
  • Farrando Pérez, Judit
  • Jardim, Erika de Oliveira
  • Martinez-Escandell, Manuel
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
A series of activated carbon materials have been prepared from petroleum residue using KOH as activating agent. The gravimetric adsorption capacity for methane of the synthesized samples increases with the activation degree, albeit at a lower packing density of the carbon material. These results anticipate an optimum pitch/KOH ratio (1:3) to achieve an upper limit in the volumetric storage capacity. Activated carbon powders have been conformed into monoliths using a small amount of a binder (5 wt%), either carboxymethyl cellulose or polyvinyl alcohol, with proper mechanical properties. Incorporation of graphite or graphene in the initial formulation does not alter and/or modify significantly the textural properties of the original activated carbon. However, once conformed into monoliths, the presence of graphite or graphene allows to improve i) the packing density of the monoliths (up to 0.52 g/cm3), ii) their mechanical properties (compressive strength ≈ 12.3 MPa) and iii) their thermal conductivity (up to 0.49 W/mK) without compromising the methane storage capacity (ca. 100 V/V).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

LiCl@AC Composites for Atmospheric Water Harvesting: Effect of the Salt Content

  • Segovia-Sandoval, Sonia Judith
  • García Ripoll, Antonio
  • Farrando Pérez, Judit
  • Abreu-Jaureguí, Coset
  • Silvestre-Albero, Joaquín
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Segovia-Sandoval, Sonia Judith|||/items/cd3adb93-2b9d-440c-a69e-67e475e63b27
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
Freshwater scarcity is a major global challenge threatening human well-being. Sorption-based atmospheric water harvesting using composites of porous materials and hygroscopic salts, offers a promising solution. In this study, activated carbon (AC) with a well-developed porous structure was impregnated with different loadings of LiCl to enhance its water sorption capacity. The resulting LiCl@AC composites were characterized in terms of their morphological, thermal, physicochemical, and textural properties, and their water sorption performance was evaluated under various relative humidity (RH) conditions and cycling tests. The composite containing 30 wt % LiCl (30LiCl@AC) exhibited the highest water uptake (0.48 g/g at 60% RH and 25 °C), approximately 4 times greater than pristine AC. This enhancement is attributed to the synergistic interaction between the hydrophilic LiCl and the hydrophobic AC surface. Adsorption–desorption cyclability tests revealed that the minimum regeneration temperature is 80 °C.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Construction of TiO2@Cu2O-CuS heterostructures integrating RGO for enhanced full-spectrum photocatalytic degradation of organic pollutants

  • Andronic, Luminita
  • Abreu-Jaureguí, Coset
  • Silvestre-Albero, Joaquín
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
This study presents the development and optimization of TiO2@Cu2O-CuS heterostructures, enhanced with reduced graphene oxide (RGO), for efficient photocatalytic degradation of organic pollutants, focusing on imidacloprid. Two configurations, TiO2/RGO/Cu2O-CuS and Cu2O-CuS/RGO/TiO2, are explored to highlight the impact of material layering on photocatalytic efficiency. The strategic integration of RGO optimizes charge transfer, crucial for photocatalysis. Comprehensive characterization techniques, such as X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), Raman spectroscopy, and Nitrogen adsorption-desorption isotherms, provide insights into the crystalline structure, morphology, surface chemistry, and textural properties of the heterostructures. The TiO2/RGO/Cu2O-CuS configuration significantly outperforms its counterpart in photocatalytic activity under full-spectrum (UV–VIS–IR) illumination, due to improved charge carrier dynamics and synergistic interactions between the composite materials. Remarkably, the TiO2/RGO/Cu2O-CuS assembly achieved over 95 % degradation of imidacloprid under simulated solar irradiation, marking a breakthrough in solar spectrum utilization for photocatalysis and exhibits promising recyclability, maintaining its high photocatalytic efficiency even after multiple degradation cycles, highlighting its potential for sustainable pollutant removal applications. Additionally, this configuration demonstrates a twofold increase in degradation efficiency compared to separate UV and VIS irradiations, emphasizing its rapid pollutant removal capability. This research underscores the critical role of material layer sequencing in developing high-efficiency photocatalytic systems and marks a significant advancement in environmental remediation technologies that harness renewable energy sources.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Improved photocatalytic performance of TiO2/carbon photocatalysts: Role of carbon additive

  • Abreu-Jaureguí, Coset
  • Andronic, Luminita
  • Sepúlveda-Escribano, Antonio
  • Silvestre-Albero, Joaquín
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
A series of TiO2 – based photocatalysts have been prepared by the incorporation of 10 wt% of various carbon-based nanomaterials as modifying agents to titania. More specifically, commercial TiO2 P25 was modified through a wet impregnation approach with methanol with four different carbon nanostructures: single-walled carbon nanotubes (SWCNTs), partially reduced graphene oxide (prGO), graphite (GI), and graphitic carbon nitride (gCN). Characterization results (XPS and Raman) anticipate the occurrence of important interfacial phenomena, preferentially for samples TiO2/SWCNT and TiO2/prGO, with a binding energy displacement of 1.35 eV and 1.54 eV, respectively, in the Ti2p contribution. These findings could be associated with an improved electron-hole mobility at the carbon/oxide interface. Importantly, these two samples constitute the most promising photocatalysts for Rhodamine B (RhB) photodegradation, with nearly 100% conversion in less than 2 h. These promising results must be associated with intrinsic physicochemical changes at the formed heterojunction structure, and the potential dual-role of the composites able to adsorb and degrade RhB simultaneously. Cyclability tests confirm the improved performance of the composites (e.g., TiO2/SWCNT, 100% degradation in 1 h) due to the combined adsorption/degradation ability, although the regeneration after several cycles is not complete due to partial blocking of the inner cavities in the carbon nanotubes by non-reacted RhB. Under these reaction conditions, Rhodamine-B xanthene dye degrades via the de-ethylation route.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Exceptional performance of Fe@carbon-rich nanoparticles prepared via hydrothermal carbonization of oil mill wastes for H2S removal

  • Abid, Meriem
  • Garcia, Ruben
  • Martinez-Escandell, Manuel
  • Fullana, Andres
  • Silvestre-Albero, Joaquín
  • Fullana, Andres|||/items/5a59481d-6a15-41b8-88c9-185b3877ea3a
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Carbon-encapsulated iron oxide nanoparticles (CE-nFe) have been obtained from an industrial waste (oil mill wastewater-OMW, as a carbonaceous source), and using iron sulfate as metallic precursor. In an initial step, the hydrochar obtained has been thermally activated under an inert atmosphere at three different temperatures (600°C, 800°C and 1000°C). The thermal treatment promotes the development of core-shell nanoparticles, with an inner core of α-Fe/Fe3O4 surrounded by a well-defined graphite shell. Temperatures above 800°C are needed to promote the graphitization of the carbonaceous species, a process promoted by iron nanoparticles through the dissolution, diffusion and growth of the carbon nanostructures on the outer shell. Breakthrough column tests show that CE-nFe exhibit an exceptional performance for H2S removal with a breakthrough capacity larger than 0.5-0.6 g H2S/gcatalyst after 3 days experiment. Experimental results anticipate the crucial role of humidity and oxygen in the adsorption/catalytic performance. Compared to some commercial samples, these results constitute a three-fold increase in the catalytic performance under similar experimental conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Rapid and efficient hydrogen clathrate hydrate formation in confined nanospace

  • Farrando Pérez, Judit
  • Balderas-Xicohtencatl, Rafael
  • Cheng, Yongqiang
  • Daemen, Luke L.
  • Cuadrado-Collados, Carlos
  • Martinez-Escandell, Manuel
  • Ramírez-Cuesta, Anibal J.
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
Clathrate hydrates are crystalline solids characterized by their ability to accommodate large quantities of guest molecules. Although CH4 and CO2 are the traditional guests found in natural systems, incorporating smaller molecules (e.g., H2) is challenging due to the need to apply higher pressures to stabilize the hydrogen-bonded network. Another critical limitation of hydrates is the slow nucleation and growth kinetics. Here, we show that specially designed activated carbon materials can surpass these obstacles by acting as nanoreactors promoting the nucleation and growth of H2 hydrates. The confinement effects in the inner cavities promote the massive growth of hydrogen hydrates at moderate temperatures, using pure water, with extremely fast kinetics and much lower pressures than the bulk system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Densified HKUST-1 Monoliths as a Route to High Volumetric and Gravimetric Hydrogen Storage Capacity

  • Madden, David G.
  • O’Nolan, Daniel
  • Rampal, Nakul
  • Babu, Robin
  • Çamur, Ceren
  • Al Shakhs, Ali N.
  • Zhang, Shi-Yuan
  • Rance, Graham A.
  • Perez, Javier
  • Casati, Nicola Pietro Maria
  • Cuadrado-Collados, Carlos
  • O’Sullivan, Denis
  • Rice, Nicholas P.
  • Gennett, Thomas
  • Parilla, Philip
  • Shulda, Sarah
  • Hurst, Katherine E.
  • Stavila, Vitalie
  • Allendorf, Mark D.
  • Silvestre-Albero, Joaquín
  • Forse, Alexander C.
  • Champness, Neil R.
  • Chapman, Karena W.
  • Fairen-Jimenez, David
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
We are currently witnessing the dawn of hydrogen (H2) economy, where H2 will soon become a primary fuel for heating, transportation, and long-distance and long-term energy storage. Among diverse possibilities, H2 can be stored as a pressurized gas, a cryogenic liquid, or a solid fuel via adsorption onto porous materials. Metal–organic frameworks (MOFs) have emerged as adsorbent materials with the highest theoretical H2 storage densities on both a volumetric and gravimetric basis. However, a critical bottleneck for the use of H2 as a transportation fuel has been the lack of densification methods capable of shaping MOFs into practical formulations while maintaining their adsorptive performance. Here, we report a high-throughput screening and deep analysis of a database of MOFs to find optimal materials, followed by the synthesis, characterization, and performance evaluation of an optimal monolithic MOF (monoMOF) for H2 storage. After densification, this monoMOF stores 46 g L–1 H2 at 50 bar and 77 K and delivers 41 and 42 g L–1 H2 at operating pressures of 25 and 50 bar, respectively, when deployed in a combined temperature–pressure (25–50 bar/77 K → 5 bar/160 K) swing gas delivery system. This performance represents up to an 80% reduction in the operating pressure requirements for delivering H2 gas when compared with benchmark materials and an 83% reduction compared to compressed H2 gas. Our findings represent a substantial step forward in the application of high-density materials for volumetric H2 storage applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

A robust Fe-based heterogeneous photocatalyst for the visible-light-mediated selective reduction of an impure CO2 stream

  • Ghosh, Topi
  • Ren, Peng
  • Franck, Philippe
  • Tang, Min
  • Jaworski, Aleksander
  • Barcaro, Giovanni
  • Monti, Susanna
  • Chouhan, Lata
  • Rabeah, Jabor
  • Skorynina, Alina
  • Silvestre-Albero, Joaquín
  • Simonelli, Laura
  • Rokicińska, Anna
  • Debroye, Elke
  • Kuśtrowski, Piotr
  • Bals, Sara
  • Das, Shoubhik
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
The transformation of CO2 into value-added products from an impure CO2 stream, such as flue gas or exhaust gas, directly contributes to the principle of carbon capture and utilization (CCU). Thus, we have developed a robust iron-based heterogeneous photocatalyst that can convert the exhaust gas from the car into CO with an exceptional production rate of 145 μmol g−1 h−1. We characterized this photocatalyst by PXRD, XPS, ssNMR, EXAFS, XANES, HR-TEM, and further provided mechanistic experiments, and multi-scale/level computational studies. We have reached a clear understanding of its properties and performance that indicates that this highly robust photocatalyst could be used to design an efficient visible-light-mediated reduction strategy for the transformation of impure CO2 streams into value-added products.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Activated carbon materials with a rich surface chemistry prepared from L-cysteine amino acid

  • Reljic, Snezana
  • Cuadrado-Collados, Carlos
  • Jardim, Erika de Oliveira
  • Farrando Pérez, Judit
  • Martinez-Escandell, Manuel
  • Silvestre-Albero, Joaquín
  • Martinez-Escandell, Manuel|||/items/d1b86ef0-e06d-4f75-b78d-9e650b53ca0e
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
A series of activated carbon materials have been successfully prepared from a non-essential amino acid, such as L-cysteine. The synthesized carbons combine a widely developed porous structure (BET surface area up to 1000 m2/g) and a rich surface chemistry (mainly oxygen, nitrogen and sulphur functionalities). These surface functional groups are relatively stable even after a high temperature thermal treatment (O>N∼S). Experimental results show that these samples with a rich surface chemistry exhibit a significant improvement in their hydrophilic character. Although the role of the surface functional groups is less pronounced for the adsorption of non-polar molecules such as CO2, CH4 and C2H4, their adsorption at atmospheric pressure is to some extend conditioned by the characteristics of the adsorbent-adsorbate interactions. The synthesized carbons exhibit an excellent adsorption performance for CO2 (up to 3 mmol/g at 0°C). Furthermore, samples with a low activation degree exhibit molecular sieving properties with very promising CO2/CH4 (up to 4.5) and C2H4/CH4 (up to 6) selectivity ratios. These results anticipate that non-essential amino acids are a versatile platform to obtain carbon materials combining a tailored porous structure and rich multifunctional surface chemistry and with potential application for gas adsorption/separation processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

An Atomically Dispersed Mn-Photocatalyst for Generating Hydrogen Peroxide from Seawater via the Water Oxidation Reaction (WOR)

  • Ren, Peng
  • Zhang, Tong
  • Jain, Noopur
  • Ching, H. Y. Vincent
  • Jaworski, Aleksander
  • Barcaro, Giovanni
  • Monti, Susanna
  • Silvestre-Albero, Joaquín
  • Celorrio, Verónica
  • Chouhan, Lata
  • Rokicińska, Anna
  • Debroye, Elke
  • Kuśtrowski, Piotr
  • Van Doorslaer, Sabine
  • Van Aert, Sandra
  • Bals, Sara
  • Das, Shoubhik
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
In this work, we have fabricated an aryl amino-substituted graphitic carbon nitride (g-C3N4) catalyst with atomically dispersed Mn capable of generating hydrogen peroxide (H2O2) directly from seawater. This new catalyst exhibited excellent reactivity, obtaining up to 2230 μM H2O2 in 7 h from alkaline water and up to 1800 μM from seawater under identical conditions. More importantly, the catalyst was quickly recovered for subsequent reuse without appreciable loss in performance. Interestingly, unlike the usual two-electron oxygen reduction reaction pathway, the generation of H2O2 was through a less common two-electron water oxidation reaction (WOR) process in which both the direct and indirect WOR processes occurred; namely, photoinduced h+ directly oxidized H2O to H2O2 via a one-step 2e– WOR, and photoinduced h+ first oxidized a hydroxide (OH–) ion to generate a hydroxy radical (•OH), and H2O2 was formed indirectly by the combination of two •OH. We have characterized the material, at the catalytic sites, at the atomic level using electron paramagnetic resonance, X-ray absorption near edge structure, extended X-ray absorption fine structure, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, magic-angle spinning solid-state NMR spectroscopy, and multiscale molecular modeling, combining classical reactive molecular dynamics simulations and quantum chemistry calculations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Advanced Removal of Dyes with Tuning Carbon/TiO2 Composite Properties

  • Yankovych, Halyna Bodnar
  • Abreu-Jaureguí, Coset
  • Farrando Pérez, Judit
  • Melnyk, Inna
  • Václavíková, Miroslava
  • Silvestre-Albero, Joaquín
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Farrando Pérez, Judit|||/items/34cb81d0-92fd-40d7-84b9-1b0ab766f49c
This study evaluates the removal of several dyes with different charge properties, i.e., anionic (Acid Red 88), cationic (Basic Red 13), and neutral (Basic Red 5) using transition metal-doped TiO2 supported on a high-surface-area activated carbon. Experimental results confirm the successful deposition of TiO2 and the derivatives (Zr-, Cu-, and Ce-doped samples) on the surface of the activated carbon material and the development of extended heterojunctions with improved electronic properties. Incorporating a small percentage of dopants significantly improves the adsorption properties of the composites towards the three dyes evaluated, preferentially for sample AC/TiO2_Zr. Similarly, the photodegradation efficiency highly depends on the nature of the composite evaluated and the characteristics of the dye. Sample AC/TiO2_Zr demonstrates the best overall removal efficiency for Acid Red 88 and Basic Red 5—83% and 63%, respectively. This promising performance must simultaneously be attributed to a dual mechanism, i.e., adsorption and photodegradation. Notably, the AC/TiO2_Ce outperformed the other catalysts in eliminating Basic Red 13 (74%/6 h). A possible Acid Red 88 degradation mechanism using AC/TiO2_Zr was proposed. This study shows that the removal efficiency of AC/TiO2 composites strongly depends on both the material and pollutant.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the Low-Pressure Hysteresis (LPH) in Gas Sorption Isotherms of Porous Carbons

  • Zelenka, Tomáš
  • Zelená, Lucie
  • Abreu-Jaureguí, Coset
  • Silvestre-Albero, Joaquín
  • Zelenková, Gabriela
  • Slovák, Václav
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
This study investigates the origin of low-pressure hysteresis (LPH) in the adsorption and desorption of three different probe molecules: carbon dioxide, nitrogen, and argon, across various adsorption temperatures (from cryogenic to room temperature), and within five different carbon materials: synthetic carbons (pristine and one post-synthetically oxidized) and natural coal. Significant attention is dedicated to elucidating LPH in oxidized samples outgassed at various temperatures (120–350 °C). Experimental results show that insufficient outgassing temperature can lead to unreliable data due to artificial LPH and significantly underestimated textural properties, primarily caused by porosity blockage from substances like moisture. Conversely, in samples where heteroatoms have a stabilizing effect on texture, such as natural coal, careful consideration of outgassing temperature is crucial due to the risk of thermal degradation. Other factors contributing to LPH are adsorption temperature, and especially, kinetic limitations at cryogenic temperatures for cellulose-based carbons. Minor factors responsible for LPH are the physical state of the sample (monolith vs powder) and the flexibility of the porous system, both studied by carbon dioxide sorption. This study constitutes an important piece in the evaluation of LPH, providing practical recommendations and underlining the importance of experimental design, with implications for further research in this complex field.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Wavelength-dependent activity screening of reduced titania for photocatalytic degradation of imidacloprid in batch and flow-mode

  • Roibu, Anca
  • Udroiu, Razvan
  • Abreu-Jaureguí, Coset
  • Silvestre-Albero, Joaquín
  • Andronic, Luminita
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
Water reuse is an emerging solution to decrease pressure on freshwater supplies and meet the increasing demand. This study explores the use of semiconductor photocatalysis for pesticide removal, focusing on extending TiO2 absorption to visible light and accelerating the screening of its wavelength-dependent photocatalytic activity. Grey to black TiO2 photocatalysts with lower direct and indirect band gap energies, up to 1.56 eV and 2.16 eV, respectively, were prepared by the chemical reduction of titania P25. The XPS analysis showed considerable oxygen vacancies, especially at the highest reduction temperature of 400 °C. The fraction of oxygen in the TiO2 lattice decreased from 90 % in the case of P25 to 53% for the photocatalyst obtained at 400 °C. The wavelength-dependent photocatalytic activity for the degradation of imidacloprid was screened in a batch photoreactor. TiO2 P25 presented higher photocatalytic activity than the reduced materials at 400 and 413 nm. At 443 nm, the material reduced at 400 °C exhibited the highest degradation efficiency of 16.8 % compared to 4.2 % as found for P25. Selected photocatalysts were then immobilized as thin films and tested in a 3D-printed flow photoreactor. Wavelength and photocatalyst’s impact on imidacloprid degradation in flow mode aligned with batch mode observations. The film activity remained stable after multiple reaction conditions and at least 150 min of operation. The proposed in-flow screening strategy is a promising approach to rapidly identify visible-light active catalysts, while minimizing the consumption of photocatalytic material and water contaminated with model pollutants.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Heteroatom-Engineered SWCNT/TiO2 Heterojunctions for Enhanced Photocatalytic Charge Transfer and Pollutant Photodegradation

  • Abreu-Jaureguí, Coset
  • Ania, Conchi O.
  • Abreu-Jaureguí, Coset|||/items/a98e5441-0b04-4cd6-b02e-2153b45f9c47
  • Silvestre-Albero, Joaquín|||/items/340b8128-2e1e-4869-8845-03b1802a1577
  • Sepúlveda-Escribano, Antonio|||/items/5559b16f-e8a5-408d-8b38-429fa29048b0
Semiconductor/carbon heterojunctions are powerful photocatalysts for environmental remediation; however, the link between the interfacial characteristics of both components (e.g., presence of surface functionalities) and photocatalytic performance remains insufficiently understood. This study investigates TiO2/carbon heterojunctions formed on surface-functionalized single-walled carbon nanotubes (sf-SWCNTs), focusing on how heteroatom doping (-O, -N, -P) of the carbon material modulates the heterojunction's photocatalytic properties. The structural analysis of the materials confirmed the formation of the heterojunction, characterized by the crystalline fingerprint of TiO2 and the graphitic lattice of the sf-SWCNTs. The surface chemistry analysis identified carboxyl/anhydride, pyridinic/pyrrolic nitrogen, and COPO3/CPO3 groups as key surface functionalities of the heterojunctions, leading to enhanced visible-light absorption and charge-carrier separation. The photocatalytic tests for the degradation of a model cationic organic pollutant highlighted TiO2/O-SWCNT as the most efficient photocatalyst to achieve degradation within 2 h, while maintaining high activity across multiple continuous cycles and facile regeneration. Scavenger studies revealed that surface functionalization promotes interfacial charge transfer, favoring both radical-mediated and direct hole oxidation pathways. Overall, this study outlines the role of heteroatom functionalities in tailoring the optical and electronic properties of TiO2/carbon heterojunctions, ultimately providing valuable insights for the rational design of advanced photocatalysts.