Skip to main content

DESIGN, PROCESSING AND CHARACTERIZATION OF INNOVATIVE BIODEGRADABLE AND COMPOSTABLE ACTIVE PACKAGING STRUCTURES TO IMPROVE FOOD SAFETY OF MEDITERRANEAN FOODS

PCI2024-153409

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Afrontar las Prioridades de Nuestro Entorno
Subprogram Subprograma Estatal de Internacionalización
Call Proyectos Programación Conjunta Internacional
Call year 2024
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PHA/PBAT biocomposites reinforced with rice straw lignocellulosic macromolecules: Decoding structure-property relationships through filler size and concentration

  • Cabrera-Villamizar, Laura Andrea
  • Núñez, Eugenia
  • Reyes, Alcira
  • Lizundia, Erlantz
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
[EN] The environmental crisis caused by the accumulation of conventional plastics requires the development of sustainable alternatives. This study introduced a novel approach to valorize agricultural waste by engineering composite materials based on blends of poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and polybutylene adipate terephthalate (PBAT) reinforced with rice straw (RS) as a possible alternative to conventional plastics. Composites were produced by melt compounding and compression molding, varying PHBV:PBAT mass ratios (80:20, 50:50, 20:80), RS particle sizes (<= 250 mu m and <= 500 mu m), and RS concentration (20, 30 and 40 w/w %). Results showed that the polymer ratio and RS particle size significantly affected filler dispersion and film properties. Smaller RS particles and higher PHBV content (80:20) led to better homogenization, improved interfacial adhesion, and enhanced water vapor barrier properties, while 50:50 blends showed poor dispersion and higher permeability. Colorimetric analysis highlighted the role of RS size in composite coloration. FTIR confirmed that RS interacts physically with the polymers, not chemically. RS addition increased rigidity and water contact angle but reduced ductility, thermal stability, and crystallinity (depending on the concentration and particle size), and increased water vapor permeability. Disintegration tests revealed that only 80:20 blends met ISO 20200:2016 standards, while biodegradation, under industrial composting, was lower for RS-containing blends than controls, highlighting the role of environmental conditions and microbial communities. Life cycle assessment showed the composites had a cradle-to-grave climate change impact of 7.89-8.28 kg CO2-eq & sdot;kg- 1, which is lower than commercial plastics. These findings demonstrate the potential of rice straw as a sustainable filler for biodegradable PHBV/PBAT composites, offering promising alternatives for eco-friendly packaging applications., Grants PID2023-146557OB-C22 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVE-PACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409) . Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolia grant (GRISOLIA/2021/050) . EL acknowledges financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigacion GIU21/010) . The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Active PLA films coated with polyphenol-rich avocado peel extracts for sustainable food packaging

  • Villanova-Estors, Raquel
  • Heras-Mozos, Raquel
  • Lopez-Carballo, Gracia
  • Aragon-Gutierrez, Alejandro
  • Hernandez-Munoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The growing generation of agro-food industry waste, along with the increasing demand for environmentally sustainable solutions, underscores the need to adopt novel circular economy strategies in food packaging. The main of this work was to develop and characterize an innovative active packaging system based on polyphenolrich extract from avocado peel residues and its application for walnut preservation. The results showed that avocado extracts obtained with ethanol-water mixtures showed higher biological activity than pure ethanol and water, which was associated with their higher polyphenol content-56.8 and 42.9 mg gallic acid equivalents per gram of peel for the 50:50 and 20:80 water:ethanol (v/v) ratios, respectively. The identification of the main compounds in the extracts confirmed the activity observed. The avocado extract obtained with 80% ethanol was directly used to dissolve hydroxypropyl methylcellulose (HPMC), which was subsequently applied as a coating onto commercial poly(lactic) acid (PLA) films. The novel active coating system improved the barrier properties compared to uncoated PLA films. Bags coated with HPMC containing 6% total phenols showed the highest antioxidant activity and this functionality was confirmed in packaged walnuts, where the peroxide index decreased from 6.9 to 3.0 meq/O2/Kg after six months of storage using the active packaging. Sensory analysis also showed lower rancidity in walnuts stored in active bags, underscoring their potential for active food preservation. These results demonstrate a technologically viable approach to valorise agro-food residues while improving food shelf life., The authors acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities (MCIU) through the projects TED2021-129335B-C22, PCI2024-153409 and PID2024-155178OB-I00 founded by MCIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. P. H -M., and R.G., are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast +) from the Spanish National Research Council (CSIC) (CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094) .The authors acknowledge the award of the Spanish government MCIU/AEI to the IATA-CSIC as Center of Excellence Accreditation Severo Ochoa (CEX2021-001189-S/MCIU/AEI/10.13039/501100011033) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of an Antifungal Edible Coating for Avocado Fruit from Avocado Residues By-Products Through a Circular Economy Approach

  • Villanova-Estors, Raquel María
  • Settier-Ramirez, Laura
  • Heras-Mozos, Raquel
  • Lopez-Carballo, Gracia
  • Perez-Gago, Maria Bernardita
  • Palou, Lluis
  • Hernandez-Munoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The environmental impact of food waste and agro-industrial by-products has promoted the development of circular economy strategies for food applications. In this study, edible films were developed from biopolymers extracted from avocado peel and seeds (hemicellulose, pectin, lignin, and starch), incorporating ethyl lauroyl arginate (LAE (R)) as an antifungal agent. The activity of LAE (R) was evaluated against Colletotrichum gloeosporioides on inoculated avocados stored at 12 degrees C and 22 degrees C. Fruit shelf life was assessed through physiological, physicochemical and sensory parameters during cold storage and subsequent shelf life. Films containing 10% LAE (R) exhibited strong antifungal activity, and their efficacy was higher at 12 degrees C than at 22 degrees C. Coated fruits exhibited a ripening delay of up to 2 days compared to controls. These findings highlight the potential use of avocado by-product-based LAE (R) coatings as a sustainable strategy for preserve postharvest avocado quality., We acknowledge the financial support through project BACOMAVO, Grant TED2021-129335B-C22, funded by MICIU/AEI/ 10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR"; project EVOLVEPACK (PRIMA program), funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409); and the MCIU/AEI award to the IATA-CSIC as the Center of Excellence Accreditation Severo Ochoa (CEX2021-001189-S/MCIU/AEI/10.13039/501100011033). Dr. Laura Settier-Ramirez was supported by the Spanish postdoctoral program 'Juan de la Cierva' (FJC2021-047537-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hemp cellulose-based aerogels and cryogels: From waste biomass to sustainable absorbent pads for food preservation

  • Cabrera-Villamizar, Laura
  • Pereira, Jéssica Fernanda
  • Castanedo, María
  • López-Rubio, Amparo
  • Fabra, Maria José
[EN] This study presents a circular economy approach utilizing hemp stems and rice straw, typically perceived as low-value agricultural waste, to develop a sustainable alternative to traditional plastic absorbent pads for food packaging. The development of an active material was achieved through the utilization of hemp cellulose and a bioactive extract isolated from rice straw. In addition to reducing plastic pollution, this material demonstrates the potential to enhance food preservation. This research provides evidence of the benefits of repurposing agricultural by-products to create valuable and environmentally-friendly products. Hemp cellulose was extracted, characterized, and processed to develop stable aerogels and cryogels through supercritical CO2 drying and freeze-drying. The water stability and internal structure of the materials were guided via TEMPO-mediated oxidation and high-pressure homogenization. Both materials showed versatile physicochemical and mechanical properties. Nevertheless, with higher water sorption (2.20 mL/g), minimal dimensional changes, and lower shrinkage, cryogels were suitable for meat absorbent pad application. To enhance the cryogels functionality, they were impregnated with a rice straw bioactive extract in two different concentrations. The incorporation of the extract did not affect the structure of the cryogels, improved their mechanical properties and the antioxidant activity remained stable after drying (63.89-78.96 %). Finally, the performance of the developed materials was compared to commercial plastic pads and pristine meat preservation challenge test during 9 days at refrigeration conditions. The incorporation of rice straw extract improved meat color preservation. While moderate extract concentrations (75 mg/g) showed a protective effect against lipid oxidation, higher levels (187.5 mg/g) induced pro-oxidant reactions. This research highlights the potential of hemp cellulose-based cryogels as sustainable and functional packaging materials for meat products., Grants PID2020-112766RB-C22, PID2023-146557OB-C22 and PCI2024-153409 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolia grant (GRISOLIA/2021/050) . The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition

  • Cabrera-Villamizar, Laura
  • Campano, Cristina
  • López Rubio, Amparo
  • Fabra, Maria José
  • Prieto, M. Auxiliadora
[EN] This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants., Grants PID2020-112766RB-C21, PID2020-112766RB-C22 and PCI2024-153409 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolia grant (GRISOLIA/2021/050) . The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged. The authors would like to thank Jose Maria Coll for his help in processing the confocal laser scanning microscopy images.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition

  • Cabrera Villamizar, Laura
  • Campano, Cristina
  • López-Rubio, Amparo
  • Fabra, María José
  • Prieto, María Auxiliadora
This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants., Grants PID2020-112766RB-C21, PID2020-112766RB-C22 and PCI2024-153409 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrocolloid-based coatings applied on biobased/biodegradable food flexible packaging, A review. Part 1 - Biopolymer to coat and available technologies

  • Debeaufort, Frédéric
  • Kurek, Mia
  • Fabra, María José
  • Ghasemi, Yasaman
  • Ščetar, Mario
  • Galić, Kata
  • Benbettaieb, Nasreddine
The shift towards sustainable food packaging has intensified research into hydrocolloid-based coatings applied to biobased and biodegradable flexible films. Indeed, most of the biobased and/or biodegradable film available for the food market exhibits too low properties, but that could be compensated by coating applications. This review explores the potential of hydrocolloids as coating materials to improve the functional properties of sustainable flexible packaging such as polylactides, polyhydroxyalkanoates, thermoplastic starch, polycaprolactone. Hydrocolloid-based coatings, including proteins, polysaccharides, and their composites, are particularly promising due to their ability to improve barrier, surface and mechanical performance while maintaining biodegradability and food safety. The choice of technique for coating application depends on the desired coating thickness, adhesion strength, and functional enhancements. Various coating technologies are discussed, ranging from solvent-free (dry) processes, such as extrusion-lamination and hot press techniques, to wet-based (solvent) methods, including solution casting, spray coating, electrospinning, etc. Surface treatments, such as plasma activation, are often required before coating application to enhance adhesion, wettability, and mechanical resistance. This review provides an in-depth analysis of available biodegradable polymer films suitable for coating and food applications and the coating technologies, setting the foundation for the development of next-generation eco-friendly packaging films., For all partners, this work was supported by the EVOLVEPACK project, a PRIMA-Horizon 2020. For the University of Zagreb (authors Kurek, Ščetar, Galić), the EVOLVEPACK Grant is PCI2024-153409, work is also supported by the Croatian Ministry of Science, Education and Youth. For the IATA (author Fabra), the EVOLVEPACK Grant is Grant PCI2024-153409, funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. The Accreditation asCenter of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged. For the university of Burgundy Europe (authors Debeaufort, Benbettaieb and Ghasemi), the EVOLVEPACK grant is PCI2024-153409 and is also funded by the National Agency for research (ANR), referenced ANR-24-P013-0008-04, and contributes also to NanoBap project grant n° ANR-23-CE09-0003-02., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PHA/PBAT biocomposites reinforced with rice straw lignocellulosic macromolecules: Decoding structure-property relationships through filler size and concentration

  • Cabrera Villamizar, Laura
  • Núñez, Eugenia
  • Reyes, Alcira
  • Lizundia, Erlantz
  • López-Rubio, Amparo
  • Fabra, María José
The environmental crisis caused by the accumulation of conventional plastics requires the development of sustainable alternatives. This study introduced a novel approach to valorize agricultural waste by engineering composite materials based on blends of poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and polybutylene adipate terephthalate (PBAT) reinforced with rice straw (RS) as a possible alternative to conventional plastics. Composites were produced by melt compounding and compression molding, varying PHBV:PBAT mass ratios (80:20, 50:50, 20:80), RS particle sizes (≤250 μm and ≤ 500 μm), and RS concentration (20, 30 and 40 w/w %). Results showed that the polymer ratio and RS particle size significantly affected filler dispersion and film properties. Smaller RS particles and higher PHBV content (80:20) led to better homogenization, improved interfacial adhesion, and enhanced water vapor barrier properties, while 50:50 blends showed poor dispersion and higher permeability. Colorimetric analysis highlighted the role of RS size in composite coloration. FTIR confirmed that RS interacts physically with the polymers, not chemically. RS addition increased rigidity and water contact angle but reduced ductility, thermal stability, and crystallinity (depending on the concentration and particle size), and increased water vapor permeability. Disintegration tests revealed that only 80:20 blends met ISO 20200:2016 standards, while biodegradation, under industrial composting, was lower for RS-containing blends than controls, highlighting the role of environmental conditions and microbial communities. Life cycle assessment showed the composites had a cradle-to-grave climate change impact of 7.89-8.28 kg CO₂-eq·kg-1, which is lower than commercial plastics. These findings demonstrate the potential of rice straw as a sustainable filler for biodegradable PHBV/PBAT composites, offering promising alternatives for eco-friendly packaging applications., Grants PID2023-146557OB-C22 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409). Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). EL acknowledges financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigación GIU21/010). The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Experimental data of manuscript Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition [DATASET]

  • Cabrera Villamizar, Laura A.
  • Campano, Cristina
  • López-Rubio, Amparo
  • Fabra, María José
  • Prieto, María Auxiliadora
This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants., Grants PID2020-112766RB-C21, PID2020-112766RB-C22 and PCI2024-153409 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Experimental data of manuscript PHA/PBAT biocomposites reinforced with rice straw lignocellulosic macromolecules: Decoding structure-property relationships through filler size and concentration [DATASET]

  • Cabrera Villamizar, Laura A.
  • Núñez, Eugenia
  • Reyes, Alcira
  • Lizundia, Erlantz
  • López-Rubio, Amparo
  • Fabra, María José
The environmental crisis caused by the accumulation of conventional plastics requires the development of sustainable alternatives. This study introduced a novel approach to valorize agricultural waste by engineering composite materials based on blends of poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and polybutylene adipate terephthalate (PBAT) reinforced with rice straw (RS) as a possible alternative to conventional plastics. Composites were produced by melt compounding and compression molding, varying PHBV:PBAT mass ratios (80:20, 50:50, 20:80), RS particle sizes (≤250 μm and ≤ 500 μm), and RS concentration (20, 30 and 40 w/w %). Results showed that the polymer ratio and RS particle size significantly affected filler dispersion and film properties. Smaller RS particles and higher PHBV content (80:20) led to better homogenization, improved interfacial adhesion, and enhanced water vapor barrier properties, while 50:50 blends showed poor dispersion and higher permeability. Colorimetric analysis highlighted the role of RS size in composite coloration. FTIR confirmed that RS interacts physically with the polymers, not chemically. RS addition increased rigidity and water contact angle but reduced ductility, thermal stability, and crystallinity (depending on the concentration and particle size), and increased water vapor permeability. Disintegration tests revealed that only 80:20 blends met ISO 20200:2016 standards, while biodegradation, under industrial composting, was lower for RS-containing blends than controls, highlighting the role of environmental conditions and microbial communities. Life cycle assessment showed the composites had a cradle-to-grave climate change impact of 7.89–8.28 kg CO₂-eq·kg−1, which is lower than commercial plastics. These findings demonstrate the potential of rice straw as a sustainable filler for biodegradable PHBV/PBAT composites, offering promising alternatives for eco-friendly packaging applications., Grants PID2023-146557OB-C22 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409). Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). EL acknowledges financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigación GIU21/010). The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Exploring composites of alternative flour sources and marine biomass residues for sustainable degradable food packaging films [DATASET]

  • Hernández-García, Eva
  • Escalante Aburto, Anayansi
  • Fabra, María José
  • López-Rubio, Amparo
This study proposes an innovative strategy to valorise agricultural and marine by-products by developing sustainable films based on different pigmented popcorn and sorghum flours, rich in bioactive polyphenols and starch, combined with holocellulosic residue from Gelidium corneum (marine biomass), a by-product of industrial agar extraction, as a possible alternative to conventional plastics. Films were produced by melt-compounding and compression-moulding with a 40:60 w/w ratio of popcorn or sorghum flour to algae residue and were compared to control films without marine biomass. The effect of incorporating and storing marine biomass was investigated. Results showed that the addition led to a more heterogeneous film morphology and modified the optical properties of the marine biomass films, decreasing luminosity, whiteness index, and internal transmittance, while enhancing yellow and green hues due to pigment interactions, with significant changes occurring during storage. In general, incorporating marine biomass increased tensile strength and stiffness, reduced elongation at break, and, upon storage, further enhanced rigidity through starch retrogradation. Additionally, the presence of biomass modulated water vapor permeability, water uptake, and hydrophobicity. These findings demonstrate the potential of combining pigmented popcorn and sorghum flours with Gelidium corneum residue as sustainable composite films, representing a promising strategy for environmentally friendly packaging., The authors acknowledge the Juan de la Cierva Formación post-doctoral contract awarded to Eva Hernández-García by the Spanish Ministry of Science and Innovation (JDC2023-05I858-I) and grant PID2022-138328OB-C21 and PCI2024-153409 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. This work was supported by EVOLVEPACK project, a PRIMA-Horizon 2020. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged. Escalante-Aburto thanks the support of Challenge-Based Research Funding 2022 of Tecnologico de Monterrey [I008 - IOR001 - C6-T1 - E, November 3, 2022]., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring composites of alternative flour sources and marine biomass residues for sustainable degradable food packaging films

  • Hernández García, Eva
  • Escalante Aburto, Anayansi
  • Fabra, María José
  • López-Rubio, Amparo
This study proposes an innovative strategy to valorize agricultural and marine by-products by developing sustainable films based on different pigmented popcorn and sorghum flours, rich in bioactive polyphenols and starch, combined with holocellulosic residue from Gelidium corneum (marine biomass), a by-product of industrial agar extraction, as a possible alternative to conventional plastics. Films were produced by melt-compounding and compression-moulding with a 40:60 w/w ratio of popcorn or sorghum flour to algae residue and were compared to control films without marine biomass. The effect of incorporating and storing marine biomass was investigated. Results showed that the addition led to a more heterogeneous film morphology and modified the optical properties of the marine biomass films, decreasing luminosity, whiteness index, and internal transmittance, while enhancing yellow and green hues due to pigment interactions, with significant changes occurring during storage. In general, incorporating marine biomass increased tensile strength and stiffness, reduced elongation at break, and, upon storage, further enhanced rigidity through starch retrogradation. Additionally, the presence of biomass modulated water vapor permeability, water uptake, and hydrophobicity. These findings demonstrate the potential of combining pigmented popcorn and sorghum flours with Gelidium corneum residue as sustainable composite films, representing a promising strategy for environmentally friendly packaging., The authors acknowledge the Juan de la Cierva Formación post-doctoral contract awarded to Eva Hernández-García by the Spanish Ministry of Science and Innovation (JDC2023-05I858-I) and grant PID2022-138328OB-C21 and PCI2024-153409 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This work was supported by EVOLVEPACK project, a PRIMA-Horizon 2020. The Accreditation asCenter of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged. Escalante-Aburto thanks the support of Challenge-Based Research Funding 2022 of Tecnologico de Monterrey [I008 - IOR001 - C6-T1 - E, November 3, 2022]., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Algae additives for sustainable materials_Dataset

  • Hernández-García, Eva
  • Fabra, María José
  • Reyes, Alcira
  • López-Rubio, Amparo
- Scanning Electron Microscopy of the cross-section of the films (.tif archives). --Crystallinity, mechanical properties, contact angle, solubility, water uptake, WVP and OP of the films based on starch and marine biomass (samplesdata.xlsx). -- Parameters and visual appearance of the films before, during and after the disintegration process (Ensayo-desintegración-ISO20200.pdf).-- DTG first derivative curves of the films (TGA.xlsx).-- XRD patterns of the films based on starch and marine biomass (XRD.xlsx), The valorisation of marine biomass is increasingly considered a potential sustainable strategy for developing biodegradable packaging materials. In this work, the incorporation of Gelidium corneum holocellulosic residue and Rugulopteryx okamurae algae into starch-based films was explored to gain insight into their possible effects on film properties. Both marine biomasses appeared to contribute to improved moisture resistance, showing reductions in water intake, permeability and solubility, although the extent of these effects varied. Films containing Gelidium corneum generally showed more notable enhancements, including increased rigidity, with tensile strength at break values reaching up to roughly twice those of pure starch films. In contrast, the incorporation of Rugulopteryx okamurae tended to produce more heterogeneous films with lower mechanically performance, without clear improvements in tensile strength and in some reductions at higher algae concentrations. These differences may be related to variations in cellulose content and the degree of compatibility with the starch matrix. Thermal and XRD analyses indicated that starch retrogradation occurred during storage, leading to increases in crystallinity, an effect that appeared particularly marked in films with Rugulopteryx okamurae (from 13.4% to 58.3%). Biodegradation tests showed that only films containing Gelidium corneum films met the ISO 20200 standard of over 90% degradation within 90 days under composting conditions. Overall, Gelidium corneum residue and Rugulopteryx okamurae algae show potential as additives for producing starch-based films, although their influence on mechanical, thermal and water-related properties differs considerably., The authors acknowledge the Juan de la Cierva Formación post-doctoral contract awarded to Eva Hernández-García by the Spanish Ministry of Science and Innovation (JDC2023-05I858-I) and grant PID2022-138328OB-C21 and PCI2024-153409 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. This work was supported by EVOLVEPACK project, a PRIMA-Horizon 2020. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset of the paper Rice Straw Nanocrystalline Cellulose as a High-Value Reinforcement for Fungal biomass/Starch Biocomposites: Structural, Thermal, and Barrier Property Enhancement

  • Cabrera Villamizar, Laura A.
  • Pérez-Bassart, Zaida
  • López-Rubio, Amparo
  • Fabra, María José
Data sheet consisting of several tabs. Each tab contains data on the characterization of raw materials and developed materials. Each tab is labeled with the type of analysis performed. The analyses performed include: moisture content, lipids, proteins, chitin, alpha-glucans, thermogravimetric analysis, FTIR, XRD, and particle size analysis, among others., This study evaluates the potential of Agaricus bisporus hortensis fungal biomass as a sustainable alternative to petroleum‑based plastics. Biomass is a renewable, fast‑growing resource, rich in carbohydrates (≈50.23%) and proteins (≈29.57%), but its direct processing into materials is limited by its mechanical performance. To overcome this limitation, composite materials were developed by combining fungal biomass with starch and rice‑straw nanocrystalline cellulose (RSNC), providing an effective valorization route for agricultural residues. The incorporation of RSNC led to a marked improvement in the mechanical properties of the composites, with no significant changes in visual appearance or color. A strong stiffening effect was observed, as the Young’s modulus increased from 139.45 MPa in the control formulation to 1239.60 MPa at 10 wt% RSNC, reaching values comparable to conventional polypropylene. In addition, the presence of 5 wt% RSNC reduced water vapor permeability by 47% and increased the water contact angle, indicating enhanced moisture resistance. These improvements were attributed to strong physical interactions and hydrogen bonding between RSNC and the biopolymeric matrix. X‑ray diffraction analysis showed a significant increase in crystallinity at higher RSNC contents, suggesting the formation of a percolating nanocellulose network. The materials were produced using a solvent‑free process compatible with conventional thermoplastic equipment. Overall, this work demonstrates a scalable, sustainable approach to producing high‑performance fungal‑based composites suitable for packaging applications., This work was supported by the Spanish Ministry of Science and Innovation (MICIU) and the State Research Agency (AEI) under grants PID2022-138328OB-C21 and PID2023-146557OB-C22, co-funded by the European Regional Development Fund (ERDF): “A way of making Europe”. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA programme (Partnership for Research and Innovation in the Mediterranean Area), funded by the European Union’s Horizon 2020 program and the national research funding agency (PCI2024-153409). L. Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana through aSantiago Grisolía fellowship (GRISOLIA/2021/050)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring the use of invasive algae Rugulopteryx okamurae and Gelidium corneum holocellulosic residue as additives in starch-based to develop sustainable materials

  • Hernández-García, Eva
  • Fabra, María José
  • Reyes, Alcira
  • López-Rubio, Amparo
The valorisation of marine biomass is increasingly considered a potential sustainable strategy for developing biodegradable packaging materials. In this work, the incorporation of Gelidium corneum holocellulosic residue and Rugulopteryx okamurae algae into starch-based films was explored to gain insight into their possible effects on film properties. Both marine biomasses appeared to contribute to improved moisture resistance, showing reductions in water intake, permeability and solubility, although the extent of these effects varied. Films containing Gelidium corneum generally showed more notable enhancements, including increased rigidity, with tensile strength at break values reaching up to roughly twice those of pure starch films. In contrast, the incorporation of Rugulopteryx okamurae tended to produce more heterogeneous films with lower mechanically performance, without clear improvements in tensile strength and in some reductions at higher algae concentrations. These differences may be related to variations in cellulose content and the degree of compatibility with the starch matrix. Thermal and XRD analyses indicated that starch retrogradation occurred during storage, leading to increases in crystallinity, an effect that appeared particularly marked in films with Rugulopteryx okamurae (from 13.4% to 58.3%). Biodegradation tests showed that only films containing Gelidium corneum films met the ISO 20200 standard of over 90% degradation within 90 days under composting conditions. Overall, Gelidium corneum residue and Rugulopteryx okamurae algae show potential as additives for producing starch-based films, although their influence on mechanical, thermal and water-related properties differs considerably., The authors acknowledge the Juan de la Cierva Formación post-doctoral contract awarded to Eva Hernández-García by the Spanish Ministry of Science and Innovation (JDC2023-05I858-I) and grant PID2022-138328OB-C21 and PCI2024-153409 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. This work was supported by EVOLVEPACK project, a PRIMA-Horizon 2020. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rice straw nanocrystalline cellulose as a high-value reinforcement for fungal biomass/starch biocomposites: Structural, thermal, and barrier property enhancement

  • Cabrera Villamizar, Laura
  • Pérez-Bassart, Zaida
  • López-Rubio, Amparo
  • Fabra, María José
This study investigates the potential of Agaricus bisporus hortensis fungal biomass as a sustainable alternative to petroleum-based plastics. This biomass is a renewable, rapidly growing resource with promising applicability as a structural material and source of bioactive compounds, containing approximately 50.23% of carbohydrates and 29.57% of protein. Although direct processing of fungal biomass can be challenging, its performance is substantially enhanced through formulation into composite materials with starch and nanocrystalline cellulose. Accordingly, novel composites were developed using A. bisporus biomass, starch, and rice-straw nanocrystalline cellulose (RSNC), establishing a valorization strategy for agricultural residues. RSNC incorporation significantly improved mechanical performance of the composites without inducing detectable changes in visual appearance or colorimetric properties. A strong stiffening effect was observed, with the Young's Modulus increasing from 139.45 MPa in the control to 1239.60 MPa at 10% RSNC, achieving values comparable to polypropylene. Furthermore, 5% RSNC reduced water vapor permeability by 47% and significantly increased the water contact angle, indicating improved hydrophobicity. The enhancements were attributed to strong physical interactions and hydrogen bonding between the RSNC and the biopolymeric matrix. X-ray diffraction revealed a significant crystalline index increase at 10% RSNC, associated with the formation of an interconnected nanocellulose network. Processing at 130 °C also imparted distinctive toasted, cocoa-like aromatic notes, attributed to pyrazines formation. The work introduces a previously unexplored approach by incorporating RSNC into fungal biomass-starch matrix. The solvent-free and industrially scalable processing method demonstrates compatibility with conventional thermoplastic equipment, advancing fungal-based composites toward practical applications in sustainable packaging., This work was supported by the Spanish Ministry of Science and Innovation (MICIU) and the State Research Agency (AEI) under grants PID2022-138328OB-C21 and PID2023-146557OB-C22, co-funded by the European Regional Development Fund (ERDF): “A way of making Europe”. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA programme (Partnership for Research and Innovation in the Mediterranean Area), funded by the European Union's Horizon 2020 program and the national research funding agency (PCI2024-153409). L. Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana through a Santiago Grisolía fellowship (GRISOLIA/2021/050). The authors also acknowledge the accreditation as a Severo Ochoa Centre of Excellence (CEX2021-01189-S), funded by MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conversion of cashew apple bagasse into ultralight cellulose cryogels: Structure-property relationship affected by lipid-removal pre-treatment

  • Barroso, Tiago Linhares Cruz Tabosa
  • Núñez, Eugenia
  • Forster-Carneiro, Tânia
  • López-Rubio, Amparo
  • Fabra, María José
This study examines converting cashew apple bagasse into ultralight cellulose cryogels and assesses how defatting pre-treatment affects the structure-property relationship. The alkaline extraction purified the biomass, raising cellulose content from 24.16% to about 70-74%. FTIR and TGA analyses confirmed the removal of non-cellulosic fractions and enhanced thermal stability, with the main thermal degradation peak occurring around 330 °C. The cryogels exhibited extremely low densities (0.018-0.020 g cm-3). Microstructural analyses by CLSM and SEM showed lipid removal (LF-CBC) led to a finer, more homogeneous, highly interconnected fibrillar structure network. At the same time, the presence of residual hydrophobic components (CBC) served as a natural structural reinforcement, increasing mechanical stiffness and resistance to pore collapse under compression. Sorption properties were strongly governed by microstructure: LF-CBC showed greater affinity for liquid water, associated with increased surface hydrophilicity, while both cryogels exhibited high oil sorption capacity (up to 36 mL g-1). XRD analysis confirmed the preservation of the crystalline structure of cellulose (type I), with crystallinity indices of 46-48%. Furthermore, the cryogels showed strong structural integrity in water without synthetic additives. This suggests cashew apple bagasse is a promising, sustainable resource for producing advanced porous biomaterials, aligning with circular economy principles., This work was supported by the Brazilian Science and Research Foundation (CNPq, Brazil) (grants 302451/2021-8). Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES, Brazil) (finance code 001). This study was financed, in part, by the São Paulo Research Foundation (FAPESP), Brasil. Process Numbers #2023/02064-8, #2024/21147-4, 2024/10205-3, and #2018/14938-4. Grant PID2023-146557OB-C22 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409). The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Cashew apple bagasse ultralight cellulose cryogels characterization [DATASET]

  • Barroso, Tiago Linhares Cruz Tabosa
  • Núñez, Eugenia
  • Forster-Carneiro, Tânia
  • López-Rubio, Amparo
  • Fabra, María José
This dataset contains the raw data supporting the study of converting cashew apple bagasse into ultralight cellulose cryogels and assessing how defatting pre-treatment affects the structure–property relationship. The data include alkaline extraction results (cellulose content of 70–74%), structural analyses (FTIR and XRD with crystallinity indices of 46–48%), and thermal stability profiles (TGA). They also include physical property measurements such as extremely low densities (0.018–0.020 g cm-3), microstructural analyses (CLSM and SEM), mechanical stiffness, and fluid sorption capacities (water and up to 36 mL g-1 for oil). These data support the conclusion that cashew apple bagasse is a promising, sustainable resource for producing advanced porous biomaterials., National Council for Scientific and Technological Development (CNPq, Brazil) [grant number 302451/2021-8]. Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES, Brazil) [Finance Code 001] São Paulo Research Foundation (FAPESP, Brazil) [grant numbers 2023/02064-8, 2024/21147-4, 2024/10205-3, and 2018/14938-4]. Project PID2023-146557OB-C22 was funded by MICIU/AEI/10.13039/501100011033 European Regional Development Fund (ERDF) "A way of making Europe". The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA program, funded by the European Union’s Horizon 2020 research and innovation program and the national research funding agency (PCI2024-153409). Financial support from the Severo Ochoa Centre of Excellence accreditation (CEX2021-01189-S) funded by MCIN/AEI/10.13039/501100011033, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Active PLA films coated with polyphenol-rich avocado peel extracts for sustainable food packaging

  • Villanova Estors, Raquel
  • Heras Mozos, Raquel
  • López-Carballo, Gracia
  • Aragón Gutiérrez, Alejandro
  • Gavara, Rafael
  • Hernández-Muñoz, Pilar
The growing generation of agro-food industry waste, along with the increasing demand for environmentally sustainable solutions, underscores the need to adopt novel circular economy strategies in food packaging. The main of this work was to develop and characterize an innovative active packaging system based on polyphenol-rich extract from avocado peel residues and its application for walnut preservation. The results showed that avocado extracts obtained with ethanol–water mixtures showed higher biological activity than pure ethanol and water, which was associated with their higher polyphenol content—56.8 and 42.9 mg gallic acid equivalents per gram of peel for the 50:50 and 20:80 water:ethanol (v/v) ratios, respectively. The identification of the main compounds in the extracts confirmed the activity observed. The avocado extract obtained with 80% ethanol was directly used to dissolve hydroxypropyl methylcellulose (HPMC), which was subsequently applied as a coating onto commercial poly(lactic) acid (PLA) films. The novel active coating system improved the barrier properties compared to uncoated PLA films. Bags coated with HPMC containing 6% total phenols showed the highest antioxidant activity and this functionality was confirmed in packaged walnuts, where the peroxide index decreased from 6.9 to 3.0 meq/O2/Kg after six months of storage using the active packaging. Sensory analysis also showed lower rancidity in walnuts stored in active bags, underscoring their potential for active food preservation. These results demonstrate a technologically viable approach to valorise agro-food residues while improving food shelf life., The authors acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities (MCIU) through the projects TED2021-129335B-C22, PCI2024-153409 and PID2024-155178OB-I00 founded by MCIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. P. H-M., and R.G., are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast+) from the Spanish National Research Council (CSIC) (CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094).The authors acknowledge the award of the Spanish government MCIU/AEI to the IATA-CSIC as Center of Excellence Accreditation Severo Ochoa (CEX2021-001189-S/ MCIU/AEI / 10.13039/501100011033, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

From seaweed biorefinery residues to functional films: how H2O2/UV-assisted pigment removal reshapes polymer networks and material performance

  • Bojorges, Hylenne
  • Correa, Yubexi
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Fabra, María José
Seaweed biorefinery residues are often regarded as cellulose-rich side streams; however, their conversion into functional films depends on how extraction and post-treatment steps preserve the residual polymer matrix. This study evaluated H<inf>2</inf>O<inf>2</inf>/UV-assisted pigment removal as both an optical-upgrading strategy and a matrix-modifying treatment for residue-based films. Solid residues remaining after furcellaran extraction from Furcellaria lumbricalis, alginate extraction from Saccharina latissima, and protein extraction from Ulva lactuca were processed by extrusion and hot pressing before and after pigment removal. The materials were characterized through compositional, spectroscopic, morphological, scattering, thermal, optical, mechanical, water-affinity, and barrier analyses. All untreated residues formed self-supporting films, but performance was strongly residue-specific. Furcellaria lumbricalis residues yielded the most cohesive films, with the highest tensile strength (8.0 ± 0.5 MPa), lowest water vapor permeability (2.4 ± 0.1 × 10<sup>−13</sup> kg m·Pa<sup>−1</sup>·s<sup>−1</sup>·m<sup>−2</sup>), low water uptake (12.1 ± 1.2%), and effective light shielding. Saccharina latissima residues produced more extensible but weaker films, whereas Ulva lactuca films showed higher water affinity and permeability. Pigment removal improved whiteness, but its functional impact depended on matrix architecture. Treated Saccharina latissima failed to form a continuous film, while treated Ulva lactuca showed the highest permeability and water uptake. These findings indicate that H<inf>2</inf>O<inf>2</inf>/UV-assisted pigment removal should not be regarded only as an optical treatment, since its impact depends strongly on the organization and composition of the residual polymer matrix: when cohesive protein-polysaccharide domains were preserved, film integrity and water resistance were maintained; when these domains were depleted, processability and barrier performance deteriorated. The results provide a structure-function basis for selecting seaweed biorefinery residues as sustainable film-forming matrices with packaging-relevant functionality., The authors acknowledge financial support from grants PID2022-138328OB-C21 and CEX2021-001189-S, funded by MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF, "A way of making Europe"), as well as grant PCI2024-153420, funded by MICIU/AEI/10.13039/501100011033 and the European Union. This work was carried out within the framework of the SEAFOODTURE project (Proposal SBEP2023-39), funded by the Sustainable Blue Economy Partnership (SBEP) Joint Call 2023; ERANET Call 2023). The authors also acknowledge financial support from the EVOLVEPACK project, which contributes to the PRIMA Programme (Partnership for Research and Innovation in the Mediterranean Area), funded through the European Union's Horizon 2020 Framework Programme and national research funding agencies (PCI2024-153409)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Experimental data of manuscript From seaweed biorefinery residues to functional films: how H₂O₂/UV-assisted pigment removal reshapes polymer networks and material performance [DATASET]

  • Bojorges, Hylenne
  • Correa, Yubexi
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Fabra, María José
Seaweed biorefinery residues are often regarded as cellulose-rich side streams; however, their conversion into functional films depends on how extraction and post-treatment steps preserve the residual polymer matrix. This study evaluated H₂O₂/UV-assisted pigment removal as both an optical-upgrading strategy and a matrix-modifying treatment for residue-based films. Solid residues remaining after furcellaran extraction from Furcellaria lumbricalis, alginate extraction from Saccharina latissima, and protein extraction from Ulva lactuca were processed by extrusion and hot pressing before and after pigment removal. The materials were characterized through compositional, spectroscopic, morphological, scattering, thermal, optical, mechanical, water-affinity, and barrier analyses. All untreated residues formed self-supporting films, but performance was strongly residue-specific. Furcellaria lumbricalis residues yielded the most cohesive films, with the highest tensile strength (8.0 ± 0.5 MPa), lowest water vapor permeability (2.4 ± 0.1 × 10⁻¹³ kg·m·Pa⁻¹·s⁻¹·m⁻²), low water uptake (12.1 ± 1.2%), and effective light shielding. Saccharina latissima residues produced more extensible but weaker films, whereas Ulva lactuca films showed higher water affinity and permeability. Pigment removal improved whiteness, but its functional impact depended on matrix architecture. Treated Saccharina latissima failed to form a continuous film, while treated Ulva lactuca showed the highest permeability and water uptake. These findings indicate that H₂O₂/UV-assisted pigment removal should not be regarded only as an optical treatment, since its impact depends strongly on the organization and composition of the residual polymer matrix: when cohesive protein-polysaccharide domains were preserved, film integrity and water resistance were maintained; when these domains were depleted, processability and barrier performance deteriorated. The results provide a structure-function basis for selecting seaweed biorefinery residues as sustainable film-forming matrices with packaging-relevant functionality., Data collection was supported by Spanish national and regional funding (MCIN/AEI/10.13039/501100011033: PID2022-138328OB-C21, PCI2024-153420; European Union's: Sustainable Blue Economy Partnership (SBEP) SBEP2023-39, PRIMA Programme PCI2024-153409, and Severo Ochoa Centre of Excellence: CEX2021-001189-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed