Skip to main content

VALORIZACION DE RESIDUOS AGROINDUSTRIALES PARA EL FOMENTO DE MATERIALES ACTIVOS SOSTENIBLES PARA PRACTICAS AGRICOLAS

PID2023-146557OB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2023
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

PHA/PBAT biocomposites reinforced with rice straw lignocellulosic macromolecules: Decoding structure-property relationships through filler size and concentration

  • Cabrera-Villamizar, Laura Andrea
  • Núñez, Eugenia
  • Reyes, Alcira
  • Lizundia, Erlantz
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
[EN] The environmental crisis caused by the accumulation of conventional plastics requires the development of sustainable alternatives. This study introduced a novel approach to valorize agricultural waste by engineering composite materials based on blends of poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and polybutylene adipate terephthalate (PBAT) reinforced with rice straw (RS) as a possible alternative to conventional plastics. Composites were produced by melt compounding and compression molding, varying PHBV:PBAT mass ratios (80:20, 50:50, 20:80), RS particle sizes (<= 250 mu m and <= 500 mu m), and RS concentration (20, 30 and 40 w/w %). Results showed that the polymer ratio and RS particle size significantly affected filler dispersion and film properties. Smaller RS particles and higher PHBV content (80:20) led to better homogenization, improved interfacial adhesion, and enhanced water vapor barrier properties, while 50:50 blends showed poor dispersion and higher permeability. Colorimetric analysis highlighted the role of RS size in composite coloration. FTIR confirmed that RS interacts physically with the polymers, not chemically. RS addition increased rigidity and water contact angle but reduced ductility, thermal stability, and crystallinity (depending on the concentration and particle size), and increased water vapor permeability. Disintegration tests revealed that only 80:20 blends met ISO 20200:2016 standards, while biodegradation, under industrial composting, was lower for RS-containing blends than controls, highlighting the role of environmental conditions and microbial communities. Life cycle assessment showed the composites had a cradle-to-grave climate change impact of 7.89-8.28 kg CO2-eq & sdot;kg- 1, which is lower than commercial plastics. These findings demonstrate the potential of rice straw as a sustainable filler for biodegradable PHBV/PBAT composites, offering promising alternatives for eco-friendly packaging applications., Grants PID2023-146557OB-C22 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVE-PACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409) . Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolia grant (GRISOLIA/2021/050) . EL acknowledges financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigacion GIU21/010) . The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hemp cellulose-based aerogels and cryogels: From waste biomass to sustainable absorbent pads for food preservation

  • Cabrera-Villamizar, Laura
  • Pereira, Jéssica Fernanda
  • Castanedo, María
  • López-Rubio, Amparo
  • Fabra, Maria José
[EN] This study presents a circular economy approach utilizing hemp stems and rice straw, typically perceived as low-value agricultural waste, to develop a sustainable alternative to traditional plastic absorbent pads for food packaging. The development of an active material was achieved through the utilization of hemp cellulose and a bioactive extract isolated from rice straw. In addition to reducing plastic pollution, this material demonstrates the potential to enhance food preservation. This research provides evidence of the benefits of repurposing agricultural by-products to create valuable and environmentally-friendly products. Hemp cellulose was extracted, characterized, and processed to develop stable aerogels and cryogels through supercritical CO2 drying and freeze-drying. The water stability and internal structure of the materials were guided via TEMPO-mediated oxidation and high-pressure homogenization. Both materials showed versatile physicochemical and mechanical properties. Nevertheless, with higher water sorption (2.20 mL/g), minimal dimensional changes, and lower shrinkage, cryogels were suitable for meat absorbent pad application. To enhance the cryogels functionality, they were impregnated with a rice straw bioactive extract in two different concentrations. The incorporation of the extract did not affect the structure of the cryogels, improved their mechanical properties and the antioxidant activity remained stable after drying (63.89-78.96 %). Finally, the performance of the developed materials was compared to commercial plastic pads and pristine meat preservation challenge test during 9 days at refrigeration conditions. The incorporation of rice straw extract improved meat color preservation. While moderate extract concentrations (75 mg/g) showed a protective effect against lipid oxidation, higher levels (187.5 mg/g) induced pro-oxidant reactions. This research highlights the potential of hemp cellulose-based cryogels as sustainable and functional packaging materials for meat products., Grants PID2020-112766RB-C22, PID2023-146557OB-C22 and PCI2024-153409 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolia grant (GRISOLIA/2021/050) . The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hemp cellulose-based aerogels and cryogels: From waste biomass to sustainable absorbent pads for food preservation

  • Cabrera Villamizar, Laura
  • Pereira, Jéssica Fernanda
  • Castanedo, María
  • López-Rubio, Amparo
  • Fabra, María José
This study presents a circular economy approach utilizing hemp stems and rice straw, typically perceived as low-value agricultural waste, to develop a sustainable alternative to traditional plastic absorbent pads for food packaging. The development of an active material was achieved through the utilization of hemp cellulose and a bioactive extract isolated from rice straw. In addition to reducing plastic pollution, this material demonstrates the potential to enhance food preservation. This research provides evidence of the benefits of repurposing agricultural by-products to create valuable and environmentally-friendly products. Hemp cellulose was extracted, characterized, and processed to develop stable aerogels and cryogels through supercritical CO2 drying and freeze-drying. The water stability and internal structure of the materials were guided via TEMPO-mediated oxidation and high-pressure homogenization. Both materials showed versatile physicochemical and mechanical properties. Nevertheless, with higher water sorption (2.20 mL/g), minimal dimensional changes, and lower shrinkage, cryogels were suitable for meat absorbent pad application. To enhance the cryogels functionality, they were impregnated with a rice straw bioactive extract in two different concentrations. The incorporation of the extract did not affect the structure of the cryogels, improved their mechanical properties and the antioxidant activity remained stable after drying (63.89–78.96 %). Finally, the performance of the developed materials was compared to commercial plastic pads and pristine meat preservation challenge test during 9 days at refrigeration conditions. The incorporation of rice straw extract improved meat color preservation. While moderate extract concentrations (75 mg/g) showed a protective effect against lipid oxidation, higher levels (187.5 mg/g) induced pro-oxidant reactions. This research highlights the potential of hemp cellulose-based cryogels as sustainable and functional packaging materials for meat products., Grants PID2020-112766RB-C22, PID2023-146557OB-C22 and PCI2024-153409 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

On the use of lignocellulosic hemp fibers to produce biodegradable cost-efficient biocomposites

  • Pereira, Jéssica Fernanda
  • Núñez, Eugenia
  • Reyes, Alcira
  • Mali, Suzana
  • López-Rubio, Amparo
  • Fabra, María José
In this study, the ability of natural hemp fibers (HF) to act as fillers in biodegradable biocomposites has been evaluated by mixing different concentrations of HF with commercially- available biodegradable polyesters, aiming at incorporating the maximum amount of HF to obtain a cost-effective new material in a sustainable approach. Blends of poly(hydroxy‑butyrate) (PHBV) and poly (butylene adipate-co-terephthalate) (PBAT) were used as polymeric matrix. HF were washed and ground before use. They were mainly composed of lignin (̴ 22 %) and carbohydrates (̴ 62–67 %) but a significant amount of proteins (̴ 8.77 %) was also detected. The polymer-HF composites were produced by melt-compounding using mild conditions and shaped as films by compression-molding to obtain test specimens used in the characterization of the biocomposites. The effect of HF loading on the final performance of the biocomposites was investigated. Interestingly, up of 40 % of HF could be incorporated as fillers into the PHBV-PBAT polymeric matrix. The incorporation of HF improved mechanical performance when compared to the polyester blends. In order to reduce its water sensitivity of the composites, food-grade beeswax or carnauba wax were incorporated within the polymeric matrix filled with HF, and the resulting biocomposites showed similar mechanical properties than their counterparts prepared without waxes but displayed significantly higher hydrophobicity., The authors wish to thank the partial financial supporter to this project by the Coordination for the Improvement of Higher Education Personnel (CAPES) of Brazil. The authors wish to acknowledge funds from the grants PID2023-146557OB-C22 and CEX2021-001189-S funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PHA/PBAT biocomposites reinforced with rice straw lignocellulosic macromolecules: Decoding structure-property relationships through filler size and concentration

  • Cabrera Villamizar, Laura
  • Núñez, Eugenia
  • Reyes, Alcira
  • Lizundia, Erlantz
  • López-Rubio, Amparo
  • Fabra, María José
The environmental crisis caused by the accumulation of conventional plastics requires the development of sustainable alternatives. This study introduced a novel approach to valorize agricultural waste by engineering composite materials based on blends of poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and polybutylene adipate terephthalate (PBAT) reinforced with rice straw (RS) as a possible alternative to conventional plastics. Composites were produced by melt compounding and compression molding, varying PHBV:PBAT mass ratios (80:20, 50:50, 20:80), RS particle sizes (≤250 μm and ≤ 500 μm), and RS concentration (20, 30 and 40 w/w %). Results showed that the polymer ratio and RS particle size significantly affected filler dispersion and film properties. Smaller RS particles and higher PHBV content (80:20) led to better homogenization, improved interfacial adhesion, and enhanced water vapor barrier properties, while 50:50 blends showed poor dispersion and higher permeability. Colorimetric analysis highlighted the role of RS size in composite coloration. FTIR confirmed that RS interacts physically with the polymers, not chemically. RS addition increased rigidity and water contact angle but reduced ductility, thermal stability, and crystallinity (depending on the concentration and particle size), and increased water vapor permeability. Disintegration tests revealed that only 80:20 blends met ISO 20200:2016 standards, while biodegradation, under industrial composting, was lower for RS-containing blends than controls, highlighting the role of environmental conditions and microbial communities. Life cycle assessment showed the composites had a cradle-to-grave climate change impact of 7.89-8.28 kg CO₂-eq·kg-1, which is lower than commercial plastics. These findings demonstrate the potential of rice straw as a sustainable filler for biodegradable PHBV/PBAT composites, offering promising alternatives for eco-friendly packaging applications., Grants PID2023-146557OB-C22 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409). Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). EL acknowledges financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigación GIU21/010). The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Closing the loop: enhancing biotechnological routes for a more circular economy transition, Editorial: Closing the loop: enhancing biotechnological routes for a more circular economy transition

  • Campano, Cristina
  • Kumar, Virender
  • Fabra, María José
  • Quartinello, Felice
The author(s) declare that financial support was received for the research and/or publication of this article. Also, editors want to acknowledge funding from the project OPENVIRO (PID2023-146557OB-C21 and PID2023-146557OB-C22), financed by MICIU/AEI/10.13039/501100011033/, H2020 UPLIFT Project by EU (Grant agreement no. 953073)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Experimental data of manuscript Hemp cellulose-based aerogels and cryogels: From waste biomass to sustainable absorbent pads for food preservation [DATASET]

  • Cabrera Villamizar, Laura A.
  • Pereira, Jessica F.
  • Castanedo, María
  • López-Rubio, Amparo
  • Fabra, María José
This study presents a circular economy approach utilizing hemp stems and rice straw, typically perceived as low-value agricultural waste, to develop a sustainable alternative to traditional plastic absorbent pads for food packaging. The development of an active material was achieved through the utilization of hemp cellulose and a bioactive extract isolated from rice straw. In addition to reducing plastic pollution, this material demonstrates the potential to enhance food preservation. This research provides evidence of the benefits of repurposing agricultural by-products to create valuable and environmentally-friendly products. Hemp cellulose was extracted, characterized, and processed to develop stable aerogels and cryogels through supercritical CO2 drying and freeze-drying. The water stability and internal structure of the materials were guided via TEMPO-mediated oxidation and high-pressure homogenization. Both materials showed versatile physicochemical and mechanical properties. Nevertheless, with higher water sorption (2.20 mL/g), minimal dimensional changes, and lower shrinkage, cryogels were suitable for meat absorbent pad application. To enhance the cryogels functionality, they were impregnated with a rice straw bioactive extract in two different concentrations. The incorporation of the extract did not affect the structure of the cryogels, improved their mechanical properties and the antioxidant activity remained stable after drying (63.89–78.96 %). Finally, the performance of the developed materials was compared to commercial plastic pads and pristine meat preservation challenge test during 9 days at refrigeration conditions. The incorporation of rice straw extract improved meat color preservation. While moderate extract concentrations (75 mg/g) showed a protective effect against lipid oxidation, higher levels (187.5 mg/g) induced pro-oxidant reactions. This research highlights the potential of hemp cellulose-based cryogels as sustainable and functional packaging materials for meat products., Grants PID2020-112766RB-C22, PID2023-146557OB-C22 and PCI2024-153409 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Experimental data of manuscript PHA/PBAT biocomposites reinforced with rice straw lignocellulosic macromolecules: Decoding structure-property relationships through filler size and concentration [DATASET]

  • Cabrera Villamizar, Laura A.
  • Núñez, Eugenia
  • Reyes, Alcira
  • Lizundia, Erlantz
  • López-Rubio, Amparo
  • Fabra, María José
The environmental crisis caused by the accumulation of conventional plastics requires the development of sustainable alternatives. This study introduced a novel approach to valorize agricultural waste by engineering composite materials based on blends of poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and polybutylene adipate terephthalate (PBAT) reinforced with rice straw (RS) as a possible alternative to conventional plastics. Composites were produced by melt compounding and compression molding, varying PHBV:PBAT mass ratios (80:20, 50:50, 20:80), RS particle sizes (≤250 μm and ≤ 500 μm), and RS concentration (20, 30 and 40 w/w %). Results showed that the polymer ratio and RS particle size significantly affected filler dispersion and film properties. Smaller RS particles and higher PHBV content (80:20) led to better homogenization, improved interfacial adhesion, and enhanced water vapor barrier properties, while 50:50 blends showed poor dispersion and higher permeability. Colorimetric analysis highlighted the role of RS size in composite coloration. FTIR confirmed that RS interacts physically with the polymers, not chemically. RS addition increased rigidity and water contact angle but reduced ductility, thermal stability, and crystallinity (depending on the concentration and particle size), and increased water vapor permeability. Disintegration tests revealed that only 80:20 blends met ISO 20200:2016 standards, while biodegradation, under industrial composting, was lower for RS-containing blends than controls, highlighting the role of environmental conditions and microbial communities. Life cycle assessment showed the composites had a cradle-to-grave climate change impact of 7.89–8.28 kg CO₂-eq·kg−1, which is lower than commercial plastics. These findings demonstrate the potential of rice straw as a sustainable filler for biodegradable PHBV/PBAT composites, offering promising alternatives for eco-friendly packaging applications., Grants PID2023-146557OB-C22 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409). Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). EL acknowledges financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigación GIU21/010). The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset of the paper Rice Straw Nanocrystalline Cellulose as a High-Value Reinforcement for Fungal biomass/Starch Biocomposites: Structural, Thermal, and Barrier Property Enhancement

  • Cabrera Villamizar, Laura A.
  • Pérez-Bassart, Zaida
  • López-Rubio, Amparo
  • Fabra, María José
Data sheet consisting of several tabs. Each tab contains data on the characterization of raw materials and developed materials. Each tab is labeled with the type of analysis performed. The analyses performed include: moisture content, lipids, proteins, chitin, alpha-glucans, thermogravimetric analysis, FTIR, XRD, and particle size analysis, among others., This study evaluates the potential of Agaricus bisporus hortensis fungal biomass as a sustainable alternative to petroleum‑based plastics. Biomass is a renewable, fast‑growing resource, rich in carbohydrates (≈50.23%) and proteins (≈29.57%), but its direct processing into materials is limited by its mechanical performance. To overcome this limitation, composite materials were developed by combining fungal biomass with starch and rice‑straw nanocrystalline cellulose (RSNC), providing an effective valorization route for agricultural residues. The incorporation of RSNC led to a marked improvement in the mechanical properties of the composites, with no significant changes in visual appearance or color. A strong stiffening effect was observed, as the Young’s modulus increased from 139.45 MPa in the control formulation to 1239.60 MPa at 10 wt% RSNC, reaching values comparable to conventional polypropylene. In addition, the presence of 5 wt% RSNC reduced water vapor permeability by 47% and increased the water contact angle, indicating enhanced moisture resistance. These improvements were attributed to strong physical interactions and hydrogen bonding between RSNC and the biopolymeric matrix. X‑ray diffraction analysis showed a significant increase in crystallinity at higher RSNC contents, suggesting the formation of a percolating nanocellulose network. The materials were produced using a solvent‑free process compatible with conventional thermoplastic equipment. Overall, this work demonstrates a scalable, sustainable approach to producing high‑performance fungal‑based composites suitable for packaging applications., This work was supported by the Spanish Ministry of Science and Innovation (MICIU) and the State Research Agency (AEI) under grants PID2022-138328OB-C21 and PID2023-146557OB-C22, co-funded by the European Regional Development Fund (ERDF): “A way of making Europe”. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA programme (Partnership for Research and Innovation in the Mediterranean Area), funded by the European Union’s Horizon 2020 program and the national research funding agency (PCI2024-153409). L. Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana through aSantiago Grisolía fellowship (GRISOLIA/2021/050)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rice straw nanocrystalline cellulose as a high-value reinforcement for fungal biomass/starch biocomposites: Structural, thermal, and barrier property enhancement

  • Cabrera Villamizar, Laura
  • Pérez-Bassart, Zaida
  • López-Rubio, Amparo
  • Fabra, María José
This study investigates the potential of Agaricus bisporus hortensis fungal biomass as a sustainable alternative to petroleum-based plastics. This biomass is a renewable, rapidly growing resource with promising applicability as a structural material and source of bioactive compounds, containing approximately 50.23% of carbohydrates and 29.57% of protein. Although direct processing of fungal biomass can be challenging, its performance is substantially enhanced through formulation into composite materials with starch and nanocrystalline cellulose. Accordingly, novel composites were developed using A. bisporus biomass, starch, and rice-straw nanocrystalline cellulose (RSNC), establishing a valorization strategy for agricultural residues. RSNC incorporation significantly improved mechanical performance of the composites without inducing detectable changes in visual appearance or colorimetric properties. A strong stiffening effect was observed, with the Young's Modulus increasing from 139.45 MPa in the control to 1239.60 MPa at 10% RSNC, achieving values comparable to polypropylene. Furthermore, 5% RSNC reduced water vapor permeability by 47% and significantly increased the water contact angle, indicating improved hydrophobicity. The enhancements were attributed to strong physical interactions and hydrogen bonding between the RSNC and the biopolymeric matrix. X-ray diffraction revealed a significant crystalline index increase at 10% RSNC, associated with the formation of an interconnected nanocellulose network. Processing at 130 °C also imparted distinctive toasted, cocoa-like aromatic notes, attributed to pyrazines formation. The work introduces a previously unexplored approach by incorporating RSNC into fungal biomass-starch matrix. The solvent-free and industrially scalable processing method demonstrates compatibility with conventional thermoplastic equipment, advancing fungal-based composites toward practical applications in sustainable packaging., This work was supported by the Spanish Ministry of Science and Innovation (MICIU) and the State Research Agency (AEI) under grants PID2022-138328OB-C21 and PID2023-146557OB-C22, co-funded by the European Regional Development Fund (ERDF): “A way of making Europe”. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA programme (Partnership for Research and Innovation in the Mediterranean Area), funded by the European Union's Horizon 2020 program and the national research funding agency (PCI2024-153409). L. Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana through a Santiago Grisolía fellowship (GRISOLIA/2021/050). The authors also acknowledge the accreditation as a Severo Ochoa Centre of Excellence (CEX2021-01189-S), funded by MCIN/AEI/10.13039/501100011033., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Conversion of cashew apple bagasse into ultralight cellulose cryogels: Structure-property relationship affected by lipid-removal pre-treatment

  • Barroso, Tiago Linhares Cruz Tabosa
  • Núñez, Eugenia
  • Forster-Carneiro, Tânia
  • López-Rubio, Amparo
  • Fabra, María José
This study examines converting cashew apple bagasse into ultralight cellulose cryogels and assesses how defatting pre-treatment affects the structure-property relationship. The alkaline extraction purified the biomass, raising cellulose content from 24.16% to about 70-74%. FTIR and TGA analyses confirmed the removal of non-cellulosic fractions and enhanced thermal stability, with the main thermal degradation peak occurring around 330 °C. The cryogels exhibited extremely low densities (0.018-0.020 g cm-3). Microstructural analyses by CLSM and SEM showed lipid removal (LF-CBC) led to a finer, more homogeneous, highly interconnected fibrillar structure network. At the same time, the presence of residual hydrophobic components (CBC) served as a natural structural reinforcement, increasing mechanical stiffness and resistance to pore collapse under compression. Sorption properties were strongly governed by microstructure: LF-CBC showed greater affinity for liquid water, associated with increased surface hydrophilicity, while both cryogels exhibited high oil sorption capacity (up to 36 mL g-1). XRD analysis confirmed the preservation of the crystalline structure of cellulose (type I), with crystallinity indices of 46-48%. Furthermore, the cryogels showed strong structural integrity in water without synthetic additives. This suggests cashew apple bagasse is a promising, sustainable resource for producing advanced porous biomaterials, aligning with circular economy principles., This work was supported by the Brazilian Science and Research Foundation (CNPq, Brazil) (grants 302451/2021-8). Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES, Brazil) (finance code 001). This study was financed, in part, by the São Paulo Research Foundation (FAPESP), Brasil. Process Numbers #2023/02064-8, #2024/21147-4, 2024/10205-3, and #2018/14938-4. Grant PID2023-146557OB-C22 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409). The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Cashew apple bagasse ultralight cellulose cryogels characterization [DATASET]

  • Barroso, Tiago Linhares Cruz Tabosa
  • Núñez, Eugenia
  • Forster-Carneiro, Tânia
  • López-Rubio, Amparo
  • Fabra, María José
This dataset contains the raw data supporting the study of converting cashew apple bagasse into ultralight cellulose cryogels and assessing how defatting pre-treatment affects the structure–property relationship. The data include alkaline extraction results (cellulose content of 70–74%), structural analyses (FTIR and XRD with crystallinity indices of 46–48%), and thermal stability profiles (TGA). They also include physical property measurements such as extremely low densities (0.018–0.020 g cm-3), microstructural analyses (CLSM and SEM), mechanical stiffness, and fluid sorption capacities (water and up to 36 mL g-1 for oil). These data support the conclusion that cashew apple bagasse is a promising, sustainable resource for producing advanced porous biomaterials., National Council for Scientific and Technological Development (CNPq, Brazil) [grant number 302451/2021-8]. Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES, Brazil) [Finance Code 001] São Paulo Research Foundation (FAPESP, Brazil) [grant numbers 2023/02064-8, 2024/21147-4, 2024/10205-3, and 2018/14938-4]. Project PID2023-146557OB-C22 was funded by MICIU/AEI/10.13039/501100011033 European Regional Development Fund (ERDF) "A way of making Europe". The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA program, funded by the European Union’s Horizon 2020 research and innovation program and the national research funding agency (PCI2024-153409). Financial support from the Severo Ochoa Centre of Excellence accreditation (CEX2021-01189-S) funded by MCIN/AEI/10.13039/501100011033, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed