Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Low pressure-drop CuO/CeO2/UiO-66 catalysts for H2 purification

  • Moraes, Carlos W. Dos Santos
  • Gómez Bernabéu, P.
  • Gómez Villegas, Katia J.
  • Guillén-Bas, Esteban
  • Martínez López, Iván
  • López Suárez, Franz Edwin
  • Davó-Quiñonero, Arantxa
  • Fairen-Jimenez, David
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Gómez Villegas, Katia J.|||/items/80196532-578e-408c-83fe-027add2b27cb
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • López Suárez, Franz Edwin|||/items/03f755cb-b680-4427-982f-28b377a4ce3b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Moraes, Carlos W. Dos Santos|||/items/d7f8b121-2eac-4bd5-97b1-e25b6234bb14
Pressure drop is responsible of a great part of the energy cost in industry due the energy consumed by pumps driving a fluid through the installation, and heterogeneous catalysis industrial processes suffer from this pressure drop penalty. This study demonstrates that UiO-66 significantly improves the catalytic performance of the CuO/CeO2 active phase for preferential CO oxidation in H2 streams with regard to a conventional γ-Al2O3 carrier due to the particular porous and crystalline properties of MOF materials. A packed bed of UiO-66 produces very low-pressure drop in comparison to conventional catalytic carriers, such as γ-Al2O3 or beta zeolite, being 4 times lower for UiO-66 than for γ-Al2O3 under 2 L/min flow of N2, and this ratio increases and approaches ∞ for lower gas flow rates. This feature of UiO-66 not only decreases the energy required to pump gases through the catalytic bed, but also improves catalytic performance of UiO-66-supported catalysts due to the enhanced gas diffusion into the catalytic bed. The reaction gases flow through the interparticle space left by the catalyst in a packed bed of CuO/CeO2/γ-Al2O3, and this produces high pressure drop, preferential gas pathways and mass transport limitations, negatively affecting the reaction rate. On the contrary, the reaction gases are able to flow through the UiO-66 material without channel constrictions, and the CuO/CeO2/UiO-66 catalysts avoid the gas diffusion restrictions of conventional catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Diving into the COx Methanation Mechanism of CO and CO2 Mixtures Catalyzed by the Nanostructured NiO-CeO2 Catalyst

  • Martínez López, Iván
  • Bueno-Ferrer, Juan
  • Martín-García, Iris
  • Guillén-Bas, Esteban
  • Davó-Quiñonero, Arantxa
  • Pérez-Dieste, Virginia
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
The CO2 methanation process in the presence of CO is a catalytic challenge toward the abatement of CO2 emissions from industrial exhaust gases with the goal of producing CH4 as a clean fuel. Herein, the COx methanation mechanisms of a NiO-CeO2 (Np) catalyst constituted by nickel oxide-cerium oxide nanoparticles with efficient operation under CO2 and CO + CO2 gas mixtures were addressed. In situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) analyses and 13C18O2 (49) pulse isotopic experiments reveal that solo CO2 methanation and comethanation (CO + CO2) present a common mechanism in which CO2 is transformed into *CO, from where the reaction proceeds. According to our outputs, inlet CO interferes with the CO2 methanation activity, delaying the reaction onset without selectivity impacts. Conversely, in the absence of CO2, the solo CO methanation performance is remarkably limited with poor CH4 selectivity. As demonstrated, the solo CO methanation mechanism is based on formates as key intermediates at low temperatures (<250 °C), while competitive CO2 production takes place onward. Near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) analyses conducted in synchrotron revealed a higher degree of reduction in the catalyst when CO and H2 are fed either alone or in combination with CO2, attributed to the CO oxygen abstraction capacity from the CeO2 phase. In the comethanation mixture, CO2 and CO are balanced in oxidation–reduction processes, yielding the maximum COx conversion, while in the solo CO methanation, reductive processes prevail, limiting the CH4 formation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Structural design and particle size examination on NiO-CeO2 catalysts supported on 3D-printed carbon monoliths for CO2 methanation

  • Martínez López, Iván
  • Martínez-Fuentes, José Clemencio
  • Bueno-Ferrer, Juan
  • Davó-Quiñonero, Arantxa
  • Guillén-Bas, Esteban
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
3D-printed high-surface carbon monoliths have been fabricated and tested as catalyst supports of CO2 metha nation active phases (NiO-CeO2, 12 wt% Ni). The carbon carriers show a developed microporosity and good adherence to the catalytic phases of NiO-CeO2, showing great stability and cyclability. Two monolith designs were used: a conventional parallel-channeled structure (honeycomb) and a complex 3D network of non-linear channels built upon interconnected circular sections (circles), where flow turbulences along the reactant gas path are spurred. The effect of the active phases particle size on the catalyst distribution and the overall per formance has been assessed by comparing NiO-CeO2 nanoparticles of 7 nm verage (Np), with a reference counterpart of uncontrolled structure (Ref). The improved radial gases diffusion in the circles monolith design is confirmed, and nanoparticles show enhanced CO2 methanation activity than the uncontrolled-size active phase at low temperatures (< 300 ºC). On the contrary, the Ref catalysts achieve higher CH4 production at higher temperatures, where the reaction kinetics is controlled by mass transfer limitations (T > 300 ºC). SEM and Hg porosimetry evidence that nanoparticles are deposited at deeper penetration through the narrow micropores of the carbon matrix of the monolithic supports, which tend to accumulate on the channels surface remaining more accessible to the reactant molecules. Altogether, this study examines the impact of the channel tortuosity and the active phase sizing on the CO2 methanation activity, serving as ground knowledge for the further rational and scalable fabrication of carbon monolith for catalytic applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Poisoning effect of chlorine anions in the catalytic activity of CuO/CeO2/UiO-66 for CO-PROX reaction and strategy for catalyst activation

  • Moraes, Carlos W. Dos Santos
  • Gómez Bernabéu, P.
  • Gómez Villegas, Katia J.
  • Guillén-Bas, Esteban
  • Martínez López, Iván
  • Davó-Quiñonero, Arantxa
  • Fairen-Jimenez, David
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Gómez Villegas, Katia J.|||/items/80196532-578e-408c-83fe-027add2b27cb
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Moraes, Carlos W. Dos Santos|||/items/d7f8b121-2eac-4bd5-97b1-e25b6234bb14
UiO-66 was synthesized using ZrOCl2·8H2O as metal precursor, and CuO/CeO2/UiO-66 catalysts were prepared and tested for preferential CO oxidation in H2-rich streams (CO-PROX reaction), a reaction of practical significance in hydrogen purification for fuel cells. The study highlights the detrimental effect of residual chlorine anions from UiO-66 synthesis and DMF washing on the catalytic performance of CuO/CeO2/UiO-66. An activation strategy involving rigorous water washing and thermal treatment at 160 °C under CO-PROX conditions was developed. Both steps were deemed necessary, as employing only one proved insufficient to reduce chlorine levels to non-poisoning thresholds. This activation procedure does compromise UiO-66 crystallinity and porosity, but it is justified by achieving a fully functional catalyst. TEM images confirm the uniform dispersion of the CuO/CeO2 active phase on the UiO-66 matrix post-activation and after catalytic testing. A 16-h CO-PROX test at 160 °C with the CuO/CeO2/UiO-66 catalyst, once activated, demonstrated stable performance throughout the extended long-term experiment. This research provides valuable insights into optimizing CuO/CeO2/UiO-66 catalysts for CO-PROX application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

3D printed steel monoliths for CO2 methanation: A feasibility study

  • Martínez-Fuentes, José Clemencio
  • Martínez López, Iván
  • Bueno-Ferrer, Juan
  • Garrigós-Pastor, Germán
  • Guillén-Bas, Esteban
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
Steel honeycomb monoliths have been manufactured by Fused Deposition Modelling-FDM 3D printing technology using 90 % 17–4 PH steel nanoparticles-loaded polymer filament. Pure steel monoliths were obtained after thermal removal of the polymer and steel sintering. NiO-CeO2 active phase nanoparticles were loaded on powder steel and on the steel monoliths, and the supported catalysts were tested in the hydrogenation of CO2 to CH4, paying special attention to the steel pretreatment before active phase loading. The catalytic experiments confirm that totally functional catalysts have been prepared, showing 100 % selective conversion of CO2 to CH4 above 225 ºC and stability in long-term experiments (18 hours at 325 ºC). The catalytic behaviour is improved by H2O2-pretreatment of the steel honeycomb monoliths before the active phase loading. XPS characterization confirms that the surface of the catalysts is oxidised on the fresh catalysts and gets even more oxidised after the catalytic tests. The H2O2-pretreatment of the steel support partially avoids the additional oxidation under reaction conditions, keeping chromium and cerium cations less oxidised than on the catalyst prepared with untreated steel. In addition, evidence about the electronic interaction between the steel support and the NiO-CeO2 (np) active phase are obtained.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Fuel from air: NiO-CeO2 nanoparticles, MgO and beta zeolite dual function materials for direct CO2 capture and hydrogenation to CH4

  • Martínez López, Iván
  • Martín-García, Iris
  • Davó-Quiñonero, Arantxa
  • Rodríguez-Bobada, Raquel
  • Vilaplana-Ortego, Eduardo
  • Guillén-Bas, Esteban
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
Dual function materials based on NiO-CeO2 nanoparticles and MgO supported on beta zeolite have been prepared and tested for direct capture of CO2 from air and further hydrogenation to CH4. Catalysts characterisation shows highly microporous materials with good dispersion of the NiO-CeO2 active phase on the zeolite carrier and a slight blockage of zeolite pores. H2-TPR and XPS characterisation reveal that the beta zeolite improves the reducibility of the dispersed NiO-CeO2 active phase. Among the synthesis methods tested, impregnation-calcination is more convenient than zeolite crystallization in the presence of NiO-CeO2, leading to materials with higher catalytic activity in the CO2 methanation reaction. On the contrary, the NiO-CeO2 loading had little effect in the range studied (10, 20 %). The presence of MgO disrupts the intrinsic high catalytic performance of NiO-CeO2, but this penalty is not encountered when both MgO and NiO-CeO2 are dispersed on the beta zeolite support. CO2 capture from air at 35 °C, studied by thermogravimetry, suggests that CO2 chemisorption on MgO and NiO-CeO2 prevails with regard to physisorption on beta zeolite. In situ DRIFTS analysis showed that the mechanism of CO2 adsorption involved carbonate and bicarbonate species and revealed that isolated silanol groups of the beta zeolite can act as CH4 trapping sites. Therefore, the MgO and NiO-CeO2 containing beta zeolite catalyst is an adequate dual function material to capture CO2 directly from air and catalyse the hydrogenation of the CO2 captured to CH4.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Nanoshaping inverse CeO2/CuOx catalysts for the preferential CO oxidation (CO-PROX) reaction: Investigation of the interface contact

  • Gómez Villegas, Katia J.
  • Martínez-Fuentes, José Clemencio
  • Martínez López, Iván
  • Guillén-Bas, Esteban
  • Martín-García, Iris
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Davó-Quiñonero, Arantxa
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Gómez Villegas, Katia J.|||/items/80196532-578e-408c-83fe-027add2b27cb
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
Herein, we explore in the catalytic behaviour in the preferential CO oxidation (CO-PROX) reaction of “inverse catalysts” where ceria is dispersed on a copper oxide support. The loadings of CeO2 in the catalysts were optimised and different ceria nanostructures were investigated. Namely, ceria nanoparticles (NP), ceria nanorods (NR), ceria nanocubes (NC), and a polycrystalline reference (RF) were dispersed on a CuOx support. 30% CeO2 was assessed as the optimum load, while bigger and bulky polycrystalline RF particles exhibited the best performance, followed by NR, NC and ultimately, NP. While X-ray photoelectron spectroscopy (XPS) analyses revealed the enhanced surface redox features of 30% RF/CU and 30% NP/CU, CO-PROX in situ diffuse reflectance infra-red Fourier transform spectroscopy (DRIFTS) and O2(36) pulse isotopic experiments showed that carbonates formed upon CO exposure on CeO2 RF assist in the Mars-van Krevelen CO-PROX mechanism, in contrast to NP, where no carbonates were formed. This study presents a comprehensive investigation of CeO2/CU inverse catalysts for CO-PROX reaction.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Rh/Ce0.9Pr0.1O2 catalysts supported on carbon monoliths with complex channels network design prepared by 3D printing for N2O decomposition

  • Martínez López, Iván
  • Martínez-Fuentes, José Clemencio
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
Rh/Ce0.9Pr0.1O2/carbon monolith catalysts have been prepared and tested for N2O decomposition, using 3D printing technology to fabricate carbon supports with different channels geometry including conventional honeycomb design and a nonlinear channel of circular interconnections. The potential penalty in pressure drop of the advanced monolith design has been experimentally ruled out. The activity of the supported catalysts has been successfully tested under simulated N2O/He gas flow and in the presence of O2, NOx and H2O simulating the gas composition in an operating room in a hospital and in a nitric acid production plant, removing in both cases the 96 % of N2O at 375 °C and 400 °C respectively. The behaviour of the catalyst with honeycomb support is improved with the advanced support with the 3D network of nonlinear channels of circular interconnections due to the promotion of gas turbulences that diminish gas diffusion limitations generated in the honeycomb channels, allowing conversion increase by 15 %. The stability of the Rh/Ce0.9Pr0.1O2/carbon monolith catalysts was studied by TGA under air flow and the combustion occurred above 435 °C, indicating that the stability window is high enough for the applications tested in this study. The catalysts characterisation indicated that the active phase loaded on the carbon monoliths is located both in the channels where the reaction gases flow through and into the carbon bulk, while the amount located into the carbon bulk generates certain diffusion limitations in the catalytic tests. The accumulation of active phase in the channels is favoured by increasing the active phase loading.