Skip to main content

DISEÑO DE FASES ACTIVAS EN FORMA DE NANOPARTICULAS Y SOPORTES AVANZADOS MEDIANTE IMPRESION 3D PARA LA METANACION DE CO2

PID2019-105960RB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design of CeO2-supported LaNiO3 perovskites as precursors of highly active catalysts for CO2 methanation

  • Onrubia-Calvo, Jon A.
  • Pereda-Ayo, Beñat
  • González-Marcos, José A.
  • Bueno López, Agustín
  • González-Velasco, Juan R.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
This work investigates the viability of 10–50% LaNiO3/CeO2 formulations, prepared by combined citric acid and impregnation methods, as precursors of highly active and stable materials for CO2 methanation. The prepared materials were widely characterized before and after the controlled reduction process. XRD and STEM-EDS mapping analysis confirmed the ex-solution of Ni NPs during reduction of LaNiO3/CeO2 formulations, leading to Ni–La2O3/CeO2 formation. Low LaNiO3 loading favored the ex-solution of small-sized Ni NPs (<5 nm) highly dispersed over CeO2 and La2O3 surfaces. H2-TPR experiments revealed that the higher reducibility of the samples prepared with low LaNiO3 loading promoted the H2 activation at lower temperatures. XPS experiments suggest that this promotion is due to the higher accessibility of Ni as well as Ni–ceria interaction. The material obtained after the reduction of the 10% LaNiO3/CeO2 formulation shows a higher concentration of weak–medium basic sites due to a higher accessibility of Ni NPs, La2O3 phase and Ni–CeO2 interface. The easier hydrogenation of CO2 adsorbed on these basic sites, together with the promoted H2-activation, maximized the CO2 methanation in the kinetically controlled region for this catalyst up to 71%. The intensification of Ni, La2O3 and CeO2 interactions also enhanced the CO2 methanation efficiency and the stability of the conventional 8.5% Ni/CeO2 catalyst. Thus, the 10% LaNiO3/CeO2 precursor emerges as a novel formulation to obtain highly active, selective and stable catalysts for CO2 methanation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Elucidating the Role of the Metal Catalyst and Oxide Support in the Ru/CeO2-Catalyzed CO2 Methanation Mechanism

  • López-Rodríguez, Sergio
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Herrera, Facundo C.
  • Pellegrin, Eric
  • Escudero, Carlos
  • García-Melchor, Max
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
This study addresses the yet unresolved CO2 methanation mechanism on a Ru/CeO2 catalyst by means of near-ambient-pressure X-ray photoelectron spectroscopy (NAP–XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) complemented with periodic density functional theory (DFT) calculations. NAP–XPS results show that the switch from H2 to CO2 + H2 mixture oxidizes both the Ru and CeO2 phases at low temperatures, which is explained by the CO2 adsorption modes assessed by means of DFT on each representative surface. CO2 adsorption on Ru is dissociative and moderately endergonic, leading to polybonded Ru-carbonyl groups whose hydrogenation is the rate-determining step in the overall process. Unlike on Ru metal, CO2 can be strongly adsorbed as carbonates on ceria surface oxygen sites or on the reduced ceria at oxygen vacancies as carboxylates (CO2–δ), resulting in the reoxidation of ceria. Carboxylates can then evolve as CO, which is released either via direct splitting at relatively low temperatures or through stable formate species at higher temperatures. DRIFTS confirm the great stability of formates, whose depletion relates with CO2 conversion in the reaction cell, while carbonates remain on the surface up to higher temperatures. CO generation on ceria serves as an additional reservoir of Ru-carbonyls, cooperating to the overall CO2 methanation process. Altogether, this study highlights the noninnocent role of the ceria support in the performance of Ru/CeO2 toward CO2 methanation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Investigations of the Effect of H2 in CO Oxidation over Ceria Catalysts

  • Davó-Quiñonero, Arantxa
  • López-Rodríguez, Sergio
  • Chaparro-Garnica, Cristian Yesid
  • Martín-García, Iris
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • García-Melchor, Max
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martín-García, Iris|||/items/1e9e585f-43e0-4b64-8b70-833d7e06848b
The preferential CO oxidation (so-called CO-PROX) is the selective CO oxidation amid H2-rich atmospheres, a process where ceria-based materials are consolidated catalysts. This article aims to disentangle the potential CO–H2 synergism under CO-PROX conditions on the low-index ceria surfaces (111), (110) and (100). Polycrystalline ceria, nanorods and ceria nanocubes were prepared to assess the physicochemical features of the targeted surfaces. Diffuse reflectance infrared Fourier-transformed spectroscopy (DRIFTS) shows that ceria surfaces are strongly carbonated even at room temperature by the effect of CO, with their depletion related to the CO oxidation onset. Conversely, formate species formed upon OH + CO interaction appear at temperatures around 60 °C and remain adsorbed regardless the reaction degree, indicating that these species do not take part in the CO oxidation. Density functional theory calculations (DFT) reveal that ceria facets exhibit high OH coverages all along the CO-PROX reaction, whilst CO is only chemisorbed on the (110) termination. A CO oxidation mechanism that explains the early formation of carbonates on ceria and the effect of the OH coverage in the overall catalytic cycle is proposed. In short, hydroxyl groups induce surface defects on ceria that increase the COx–catalyst interaction, revealed by the CO adsorption energies and the stabilization of intermediates and readsorbed products. In addition, high OH coverages are shown to facilitate the hydrogen transfer to form less stable HCOx products, which, in the case of the (110) and (100), is key to prevent surface poisoning. Altogether, this work sheds light on the yet unclear CO–H2 interactions on ceria surfaces during CO-PROX reaction, providing valuable insights to guide the design of more efficient reactors and catalysts for this process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

PrOx nanoparticles: active and stable catalysts for soot combustion

  • Sellers Antón, Begoña
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
PrOx nanoparticles (10nm; 81m2/g) were synthesized and analysed as soot combustion catalyst in comparation with other reference materials including CeO2 nanoparticles and PrOx and CeO2 catalysts with three dimensionally ordered (3DOM) and without controlled structure. PrOx nanoparticles reached the highest activity; T50 decreases from 603 °C (uncatalysed combustion) to 494 °C. This high activity can be attributed to the high surface area/low crystal size, which enhances the soot catalyst contact, and to the improved reducibility. PrOx nanoparticles kept high activity (T50 = 520 °C) after aging at 800 °C, being significantly more active than aged PrOx catalysts with 3DOM and uncontrolled structure and also significantly more active than all aged CeO2 catalysis which suffer almost total deactivation upon aging. In all cases, PrOx catalysts are more active than CeO2 counterpart materials with the same structure and thermal history, and this applies to nanoparticles, 3DOM and uncontrolled structures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Structural design and particle size examination on NiO-CeO2 catalysts supported on 3D-printed carbon monoliths for CO2 methanation

  • Martínez López, Iván
  • Martínez-Fuentes, José Clemencio
  • Bueno-Ferrer, Juan
  • Davó-Quiñonero, Arantxa
  • Guillén-Bas, Esteban
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Bueno-Ferrer, Juan|||/items/3cb6afb7-7e11-4974-92c1-66ba1678be13
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Guillén-Bas, Esteban|||/items/99088a57-13a2-4300-b85d-b09c87183030
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Martínez-Fuentes, José Clemencio|||/items/38492149-f9fb-4aac-af4b-71088c5f74c0
  • Martínez López, Iván|||/items/9d725495-fe57-4f3a-8e7f-3eb6f3690fe1
3D-printed high-surface carbon monoliths have been fabricated and tested as catalyst supports of CO2 metha nation active phases (NiO-CeO2, 12 wt% Ni). The carbon carriers show a developed microporosity and good adherence to the catalytic phases of NiO-CeO2, showing great stability and cyclability. Two monolith designs were used: a conventional parallel-channeled structure (honeycomb) and a complex 3D network of non-linear channels built upon interconnected circular sections (circles), where flow turbulences along the reactant gas path are spurred. The effect of the active phases particle size on the catalyst distribution and the overall per formance has been assessed by comparing NiO-CeO2 nanoparticles of 7 nm verage (Np), with a reference counterpart of uncontrolled structure (Ref). The improved radial gases diffusion in the circles monolith design is confirmed, and nanoparticles show enhanced CO2 methanation activity than the uncontrolled-size active phase at low temperatures (< 300 ºC). On the contrary, the Ref catalysts achieve higher CH4 production at higher temperatures, where the reaction kinetics is controlled by mass transfer limitations (T > 300 ºC). SEM and Hg porosimetry evidence that nanoparticles are deposited at deeper penetration through the narrow micropores of the carbon matrix of the monolithic supports, which tend to accumulate on the channels surface remaining more accessible to the reactant molecules. Altogether, this study examines the impact of the channel tortuosity and the active phase sizing on the CO2 methanation activity, serving as ground knowledge for the further rational and scalable fabrication of carbon monolith for catalytic applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design and fabrication of integral carbon monoliths combining 3D printing and sol–gel polymerization: effects of the channel morphology on the CO-PROX reaction

  • Chaparro-Garnica, Cristian Yesid
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A new method to synthesize integral carbon monoliths with a controlled channel morphology has been developed in this work by combining 3D-printing technology and sol–gel polymerization. By this method, robust and consistent carbon monoliths were obtained with a perfect replica of the channel architecture at a microscale range. As a proof of concept, a carbon monolith with tortuous channels that split and join successively along the monolith length has been designed, fabricated and tested as a CuO/CeO2 support for the preferential oxidation of CO in the presence of H2 (CO-PrOx), which is a topic of ongoing research for H2 purification in fuel cells. The behavior of this novel carbon monolith catalyst has been compared with that of a counterpart catalyst prepared with a conventional honeycomb design. Results shown that the wide macroporosity of the carbon network favors the anchoring and dispersion of the active phase both in the channel surface and the carbon network. The channel architecture affects the gas diffusion both through the channel and the carbon network and consequently, affects the active phase accessibility and activity. T50 (the temperature to achieve 50% CO conversion) decreases by almost 13 °C at 240 mL min−1 in the carbon monolith with tortuous channels (T50 = 79.7 °C) compared to the honeycomb monolith (T50 = 93.1 °C). The turbulent path created by the tortuous channels favours the active phase–gas contact and even the gas diffusion inside the macropores of the carbon skeleton improving the catalytic performance of the active phase compared to that by the conventional honeycomb design. Thus, this work demonstrates the potential of 3D printing to improve the catalytic supports currently available.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Active, selective and stable NiO-CeO2 nanoparticles for CO2 methanation

  • Cárdenas-Arenas, Andrea
  • Soriano Cortés, Helena
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Cárdenas-Arenas, Andrea|||/items/876a2177-4ebf-4f0a-8e5f-f1e4998f01b0
CO2 hydrogenation to CH4 (or methanation) has been proposed to diminish CO2 emissions producing a valuable fuel. A catalyst consisting of NiO-CeO2 mixed oxide 6–7 nm nanoparticles with enhanced properties has been prepared, and compared with other NiO-CeO2 reference catalysts including a mixed oxide with the same composition but without control of the size, a counterpart NiO-CeO2 mixed oxide with three dimensionally ordered macroporous (3DOM) structure and an inverse catalyst consisting of bulk NiO-supported CeO2 nanoparticles among others. At 275 °C the CO2 methanation rate is near 3 times higher to that achieved with the counterpart reference catalyst prepared without control of the size, being more active than all reference catalysts. The selectivity towards CH4 formation is ~100% in the whole range of temperature studied (until 500 °C), and kept the same activity and selectivity during a 25 h long-term test. The high activity of this catalyst is related with its high specific surface area (122 m2/g) and with the presence of highly-reducible Ni-O-Ce species on the nanoparticles surface.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of Pr in CO2 Methanation Ru/CeO2 Catalysts

  • López-Rodríguez, Sergio
  • Davó-Quiñonero, Arantxa
  • Juan Juan, Jerónimo
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
CO2 methanation has been studied with Pr-doped Ru/CeO2 catalysts, and a dual effect of Pr has been observed. For low Pr content (i.e., 3 wt %) a positive effect in oxygen mobility prevails, while for high Pr doping (i.e., 25 wt %) a negative effect in the Ru–CeO2 interaction is more relevant. Isotopic experiments evidenced that Pr hinders the dissociation of CO2, which takes place at the Ru–CeO2 interface. However, once the temperature is high enough (200 °C), Pr improves the oxygen mobility in the CeO2 support, and this enhances CO2 dissociation because the oxygen atoms left are delivered faster to the support sink and the dissociation sites at the interface are cleaned up faster. In situ Raman spectroscopy experiments confirmed that Pr improves the creation of oxygen vacancies on the ceria lattice but hinders their reoxidation by CO2, and both opposite effects reach an optimum balance for 3 wt % Pr doping. In addition, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments showed that Pr doping, regardless of the amount, decreases the population of surface carbon species created on the catalysts surface upon CO2 chemisorption under methanation reaction conditions, affecting both productive reaction intermediates (formates and carbonyls) and unproductive carbonates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Monitoring by in situ NAP-XPS of active sites for CO2 methanation on a Ni/CeO2 catalyst

  • López-Rodríguez, Sergio
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Villar-Garcia, Ignacio J.
  • Perez Dieste, Virginia
  • Onrubia-Calvo, Jon A.
  • González-Velasco, Juan R.
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Ni/CeO2 catalysts are very active and selective for total hydrogenation of CO2 to methane, but the nature of the active sites is still unclear. The surface of a Ni/CeO2 catalyst has been monitored under CO2 methanation conditions by Near Ambient Pressure-XPS (NAP-XPS) using synchrotron radiation, and has been concluded that the species involved in the redox processes taking place during the CO2 methanation mechanism are the Ni2+-CeO2/Ni0 and Ce4+/Ce3+ pairs. In addition, a small fraction of nickel is present on the catalyst surface forming NiO and Ni2+-carbonates/hydroxyls (around 20% of the total surface nickel), but these species do not participate in the redox processes of the methanation mechanism. Under CO2 methanation conditions the H2 reduction rate of the Ni2+-CeO2/Ni0 and Ce4+/Ce3+ couples is much faster than their CO2 reoxidation rate (2 times faster, at least, at 300ºC), but a certain proportion of nickel always remains oxidized under reaction conditions. The high activity of Ni/CeO2 catalysts for CO2 methanation is tentatively attributed to the simultaneous presence of Ni2+-CeO2 and Ni0 active sites where CO2 and H2 are expected to be efficiently dissociated, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

High Performance Tunable Catalysts Prepared by Using 3D Printing

  • Chaparro-Garnica, Cristian Yesid
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Da Costa, Patrick
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Honeycomb monoliths are the preferred supports in many industrial heterogeneous catalysis reactions, but current extrusion synthesis only allows obtaining parallel channels. Here, we demonstrate that 3D printing opens new design possibilities that outperform conventional catalysts. High performance carbon integral monoliths have been prepared with a complex network of interconnected channels and have been tested for carbon dioxide hydrogenation to methane after loading a Ni/CeO2 active phase. CO2 methanation rate is enhanced by 25% at 300 °C because the novel design forces turbulent flow into the channels network. The methodology and monoliths developed can be applied to other heterogeneous catalysis reactions, and open new synthesis options based on 3D printing to manufacture tailored heterogeneous catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of Ru loading on Ru/CeO2 catalysts for CO2 methanation

  • López-Rodríguez, Sergio
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The conversion of CO2 towards added valuable products is considered as a potential alternative to achieve the increase of the petrochemical industry while reducing the CO2 emissions. In the present work, the effect of Ru loading on CeO2 supports has been studied for the CO2 methanation reaction, and catalysts with different Ru loading in the 1–5 wt. % range have been prepared, characterized, and tested. The optimum Ru loading has been found to be 2.5 wt. %. Ruthenium cations are reduced at the lowest temperature for this optimum loading according to H2-TPR experiments (even at room temperature), and the highest proportion of ruthenium cations with strong interaction with ceria is achieved, as deduced from XPS. XRD characterization suggests partial insertion of ruthenium cations into the ceria lattice. In situ DRIFTS experiments evidenced that the balance between formation upon CO2 chemisorption and further hydrogenation of surface carbon intermediates is optimum for 2.5 wt. % Ru/CeO2. For low metal contents, the CO2 chemisorption is limited and no relevant, while as the metal content is increased, the hydrogenation of carbon species is less favourable. The 2.5 wt.% Ru/CeO2 catalyst comprises a balance between surface-carbon groups formation and further hydrogenation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Intrinsic kinetics of CO2 methanation on low-loaded Ni/Al2O3 catalyst: Mechanism, model discrimination and parameter estimation

  • Quindimil, Adrián
  • Onrubia-Calvo, Jon A.
  • Davó-Quiñonero, Arantxa
  • Bermejo-López, Alejandro
  • Bailón-García, Esther
  • Pereda-Ayo, Beñat
  • Lozano-Castello, Dolores
  • González-Marcos, José A.
  • Bueno López, Agustín
  • González-Velasco, Juan R.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The mechanism and kinetic of CO2 methanation reaction of 9.5 % Ni/Al2O3 catalyst is analysed under a wide range of operating conditions. Once the catalyst activity is stabilized, the influence of temperature, total pressure and space velocity is studied for kinetic characterisation. A data set comprising of 153 experimental runs has been used to develop a kinetic model capable to accurately predict the reaction rate. Ni/Al2O3 catalyst shows an apparent activation energy of 80.1 kJ mol−1 in CO2 hydrogenation. Data obtained under differential mode adjust quite precisely to a power-law model with H2O inhibition, with a water adsorption constant of 3.1 atm−1 and apparent orders of 0.24 and 0.27 for H2 and CO2, respectively. Based on DRIFTS results, we propose for the first time the H-assisted CO formation route, which is compared with the more conventionally reported carbonyl route, and describe the corresponding reaction rate LHHW equation, resulting in notable improvement for mean deviation (D) of 7.0 % in our model related to that based on the carbonyl route (D = 20.1 %) usually suggested for catalysts with higher Ni loads around 20 %. The H-assisted CO formation route considers the formate species decomposition into carbonyls via H-assisted CO formation mechanism and further carbonyls hydrogenation into CHO as the rate determining step. Thus, the LHHW mechanism, in which carbonyls as well as formate species participate in CO2 methanation, is capable to reflect the kinetics of lowly-loaded Ni/Al2O 3 catalyst with high accuracy under relevant process conditions (315−430 °C, 1−6 bar, H2 to CO2 molar ratios between 1–16 and, different reagents and products partial pressures).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Stable NiO–CeO2 nanoparticles with improved carbon resistance for methane dry reforming

  • Cárdenas-Arenas, Andrea
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Da Costa, Patrick
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Cárdenas-Arenas, Andrea|||/items/876a2177-4ebf-4f0a-8e5f-f1e4998f01b0
High surface area mixed oxide 8.7% NiO-CeO2 nanoparticles (122 m2/g; 6–7 nm) were prepared using a reversed microemulsion method, and were tested for dry methane reforming (DRM). The catalytic activity of these nanoparticles remains stable under the severe conditions of DRM (700 °C), and they show better carbon resistance than conventional NiO-CeO2 catalysts prepared without control of the size. The activity and selectivity of nanoparticles and reference catalyst are similar, but nanoparticles reduce by 63% the accumulation of carbon during the DRM tests, which is a key feature for this reaction. XPS and H2-TPR suggest that the improved carbon resistance of the nanoparticles is the better interaction and cooperation between NiO and CeO2 mixed phases. In nanoparticles, the participation of cerium cations in the redox processes taking place during DRM stabilize cationic species of nickel. On the contrary, the catalyst prepared without control of the size suffered segregation of Ni during DRM reaction, and segregated Ni explains the higher catalytic formation of carbon.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Mineral Manganese Oxides as Oxidation Catalysts: Capabilities in the CO-PROX Reaction

  • Davó-Quiñonero, Arantxa
  • López-Rodríguez, Sergio
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Cryptomelane is an abundant mineral manganese oxide with unique physicochemical features. This work investigates the real capabilities of cryptomelane as an oxidation catalyst. In particular, the preferential CO oxidation (CO-PROX), has been studied as a simple reaction model. When doped with copper, the cryptomelane-based material has revealed a great potential, displaying a comparable activity to the high-performance CuO/CeO2. Despite stability concerns that compromise the primary catalyst reusability, CuO/cryptomelane is particularly robust in the presence of CO2 and H2O, typical components of realistic CO-PROX streams. The CO-PROX reaction mechanism has been assessed by means of isotopic oxygen pulse experiments. Altogether, CuO/CeO2 shows a greater oxygen lability, which facilitates lattice oxygen enrolment in the CO-PROX mechanism. In the case of CuO/cryptomelane, in spite of its lower oxygen mobility, the intrinsic structural water co-assists as active oxygen species involved in CO-PROX. Thus, the presence of moisture in the reaction stream turns out to be beneficial for the stability of the cryptomelane structure, besides aiding into the active oxygen restitution in the catalyst. Overall, this study proves that CuO/cryptomelane is a promising competitor to CuO/CeO2 in CO-PROX technology, whose implementation can bring the CO-PROX technology and H2 purification processes a more sustainable nature.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Copper‐Lanthanum Catalysts for NOx and Soot Removal

  • Alcalde-Santiago, Virginia
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The individual and simultaneous removal of NOx by Storage and Reduction with H2 (H2‐NSR) and combustion of soot have been studied for La and CuLa catalysts. The NOx storage capacity of pure lanthanum oxide is improved either by copper addition or by using a colloidal crystal hard template for the synthesis of a macroporous structure. Although the NOx storage capacity of the CuLa macroporous material is around ten times lower regarding conventional PtBa catalysts, the kinetics of the H2‐NSR cycles are fast enough to allow high NOx removal (until 90 % removal). Lanthanum oxide catalyst prepared with uncontrolled structure has no activity for soot combustion, but the activity increases for a macroporous counterpart prepared using the colloidal crystal template because the macroporous structure improves the soot‐catalyst contact and allows the nitrogen‐oxygen surface groups yielded upon NOx chemisorption to oxidize soot. The soot combustion activity of lanthanum catalysts is also enhanced upon copper loading, because copper improves the NO2‐assisted soot combustion mechanism and favors the chemisorption of NOx, enhancing soot oxidation by nitrogen‐oxygen surface species. Finally, it is demonstrated that the simultaneous removal of NOx by H2‐NSR and soot combustion can be carried out with a CuLa catalyst at 450 °C. The simultaneous removal does not affect the combustion of soot and only has a small effect in NOx removal.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Kinetics, Model Discrimination, and Parameters Estimation of CO2 Methanation on Highly Active Ni/CeO2 Catalyst

  • Onrubia-Calvo, Jon A.
  • Quindimil, Adrián
  • Davó-Quiñonero, Arantxa
  • Bermejo-López, Alejandro
  • Bailón-García, Esther
  • Pereda-Ayo, Beñat
  • Lozano-Castello, Dolores
  • González-Marcos, José A.
  • Bueno López, Agustín
  • González-Velasco, Juan R.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The reaction kinetics of CO2 methanation over a highly active 8.5% Ni/CeO2 catalyst was determined in a fixed-bed reactor, in the absence of heat- and mass-transfer limitations. Once the catalyst activity was stabilized, more than 120 kinetic experiments (with varying values of reaction temperature, total pressure, space velocity (GHSV), and partial pressure of products and reactants) were performed. From initial reaction rates, an apparent activation energy of 103.9 kJ mol–1 was determined, as well as the effect of reactants (positive) and water partial pressures (negative) on CO2 methanation rate. Three mechanistic models reported in the literature, in which CO2 is adsorbed dissociatively (carbon and formyl routes) or directly (formate route), were explored for modeling the entire reaction kinetics. For that, the corresponding rate equations were developed through the Langmuir–Hinshelwood–Hougen–Watson (LHHW) approach. In agreement with DRIFTS experiments, formate route, in which the hydrogenation of bicarbonate to formate is considered to be the rate-determining step, reflects the kinetic data accurately, operating from differential conversion to thermodynamic equilibrium. In fact, this mechanism results in a mean deviation (D) of 10.38%. Based on previous own mechanistic studies, the participation of two different active sites has been also considered. Formate route on two active sites maintains a high fitting quality of experimental data, providing kinetics parameters with a higher physical significance. Thus, the LHHW mechanism, in which Ni0 sites as well as oxygen vacant near to Ni-CeO2 interface participate in CO2 methanation, is able to predict the kinetics of Ni/CeO2 catalyst accurately for a wide range of operational conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Molecular elucidation of CO2 methanation over a highly active, selective and stable LaNiO3/CeO2-derived catalyst by in situ FTIR and NAP-XPS

  • Onrubia-Calvo, Jon A.
  • López-Rodríguez, Sergio
  • Villar-Garcia, Ignacio J.
  • Perez Dieste, Virginia
  • Bueno López, Agustín
  • González-Velasco, Juan R.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
The CO2 methanation mechanism over the highly active (TOF=75.1 h−1), selective (>92%) and stable 10% LaNiO3/CeO2-derived catalyst is still unresolved. The surface of the catalyst is monitored under hydrogenation (H2), oxidizing (CO2) and CO2 methanation (H2 +CO2) conditions by near ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) using synchrotron radiation. Meanwhile, the main reaction intermediates are identified by in situ FTIR analysis. NAP-XPS experiments confirm that LaNiO3 perovskite reduction leads to the ex-solution of Ni0 nanoparticles and Ni2+single bondCeO2−x and Ni2+single bondLa2O3 interfaces conformation, favouring the CO2 adsorption and the H2 dissociation/transfer. In situ FTIR experiments combined with the C1s spectra (NAP-XPS) suggest that the CO2 activation occurs on CeO2−x (oxygen vacancies and OH–) at low temperatures, in the form of bicarbonates; whereas, mono-/bidentate carbonates are formed on different strength La2O3 sites at increasing temperatures. These species are consecutively reduced to formates, as the main reaction intermediate, and methane by the H spilled from Ni0 nanoparticles near to NiOsingle bondCeO2−x and NiOsingle bondLa2O3 interfaces.