Skip to main content

-

FJCI-2015-23769

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprogram Subprograma Estatal de Formación
Call Juan de la Cierva Formación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Key‐lock Ceria Catalysts for the Control of Diesel Engine Soot Particulate Emissions

  • Sorolla-Rosario, Débora
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A new concept, referred to as key‐lock catalyst, is presented in this article. Soot combustion ceria catalysts were prepared combining hard (polymethylmethacrylate colloidal crystals) and soft (Pluronic F127) templates, tuning the porosity of ceria in different size ranges to match the morphology of soot aggregates. The catalysts porosity was characterized in detail by N2 adsorption‐desorption isotherms and Hg‐porosimetry. XRD and H2‐TPR characterization ruled out that differences in activity are related neither with crystallographic nor with redox properties. As a proof of key‐lock catalyst concept, an optimum key‐lock ceria catalyst was synthesized by combining large macropores (100–300 nm) with mesopores (10–30 nm), because they fit to the large soot aggregates and to primary soot particles sizes, respectively. The best soot combustion activity of the optimum key‐lock catalyst is attributed to the optimum transfer of ceria active oxygen from catalyst to soot. The catalytic results confirmed that all ceria catalysts prepared with different porosity oxidize NO to NO2 at the same rate, and the NO2‐assisted soot combustion pathway is not affected by tuning ceria porosity. This double‐templated synthesis and the key‐lock concept opens a new synthesis approach to design noble‐metal free soot combustion catalysts based on the highly effective active oxygen mechanism.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Elucidating the Role of the Metal Catalyst and Oxide Support in the Ru/CeO2-Catalyzed CO2 Methanation Mechanism

  • López-Rodríguez, Sergio
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Herrera, Facundo C.
  • Pellegrin, Eric
  • Escudero, Carlos
  • García-Melchor, Max
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
This study addresses the yet unresolved CO2 methanation mechanism on a Ru/CeO2 catalyst by means of near-ambient-pressure X-ray photoelectron spectroscopy (NAP–XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) complemented with periodic density functional theory (DFT) calculations. NAP–XPS results show that the switch from H2 to CO2 + H2 mixture oxidizes both the Ru and CeO2 phases at low temperatures, which is explained by the CO2 adsorption modes assessed by means of DFT on each representative surface. CO2 adsorption on Ru is dissociative and moderately endergonic, leading to polybonded Ru-carbonyl groups whose hydrogenation is the rate-determining step in the overall process. Unlike on Ru metal, CO2 can be strongly adsorbed as carbonates on ceria surface oxygen sites or on the reduced ceria at oxygen vacancies as carboxylates (CO2–δ), resulting in the reoxidation of ceria. Carboxylates can then evolve as CO, which is released either via direct splitting at relatively low temperatures or through stable formate species at higher temperatures. DRIFTS confirm the great stability of formates, whose depletion relates with CO2 conversion in the reaction cell, while carbonates remain on the surface up to higher temperatures. CO generation on ceria serves as an additional reservoir of Ru-carbonyls, cooperating to the overall CO2 methanation process. Altogether, this study highlights the noninnocent role of the ceria support in the performance of Ru/CeO2 toward CO2 methanation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Three-dimensionally ordered macroporous PrOx: An improved alternative to soot combustion ceria catalysts

  • Alcalde-Santiago, Virginia
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The synthesis and use for soot combustion of praseodymium oxide with three-dimensionally ordered macroporous (3DOM) structure is described. This novel PrOx-3DOM catalyst is presented as an improved novel metal-free alternative to CeO2 as soot combustion catalyst. The PrOx-3DOM catalyst presents a well-defined 3DOM structure with high macropores volume, which significantly enhances the solid-solid soot-catalyst contact. This enhanced contact, together with the improved reducibility of PrOx regarding CeO2, ameliorate the active oxygen production and its transfer to soot particles, improving the soot combustion with O2. In addition, the higher ability of PrOx to oxidize NO to NO2, improves the soot combustion in a higher extent than CeO2 in presence of NOx. The catalytic activity of PrOx-3DOM after several soot combustion cycles is also confirmed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design of Monolithic Supports by 3D Printing for Its Application in the Preferential Oxidation of CO (CO-PrOx)

  • Chaparro-Garnica, Cristian Yesid
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Honeycomb-shaped cordierite monoliths are widely used as supports for a large number of industrial applications. However, the high manufacturing cost of cordierite monoliths only justifies its use for high temperatures and aggressive chemical environments, demanding applications where the economic benefit obtained exceeds the manufacturing costs. For low demanding applications, such as the preferential oxidation of CO (CO-PrOx), alternative materials can be proposed to reduce manufacturing costs. Polymeric monoliths would be an interesting low-cost alternative; however, the limitations of the active phase incorporation to the polymeric support must be overcome. In this work, the implementation and use of polymeric monolithic structures obtained by three-dimensional printing to support CuO/CeO2 catalysts for CO-PrOx have been studied. Several approaches were used to anchor the active phase into the polymeric monoliths, such as adding inorganic materials (carbon or silica) to the polymer previous to the printing process, chemical attack with solvents of the printed resin before or during the active phase incorporation, and consecutive impregnation and modification of the channel wall design. Among those approaches, best results were obtained by the addition of silica and by channel modification. Independent of the strategy followed, a subsequent thermal treatment in N2 was required to soften the resin and favor the active phase anchoring. However, catalyst particles become embedded on the polymeric resin being not active, and thus, a final cleaning thermal treatment under air was needed to recover the active phase activity, after which the supported active phase demonstrated good catalytic activity, stability, and reusability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Insights into the Oxygen Vacancy Filling Mechanism in CuO/CeO2 Catalysts: A Key Step Toward High Selectivity in Preferential CO Oxidation

  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • López-Rodríguez, Sergio
  • Juan Juan, Jerónimo
  • Lozano-Castello, Dolores
  • García-Melchor, Max
  • Herrera, Facundo C.
  • Pellegrin, Eric
  • Escudero, Carlos
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The preferential CO oxidation (CO-PROX) reaction is paramount for the purification of reformate H2-rich streams, where CuO/CeO2 catalysts show promising opportunities. This work sheds light on the lattice oxygen recovery mechanism on CuO/CeO2 catalysts during CO-PROX reaction, which is critical to guarantee both good activity and selectivity, but that is yet to be well understood. Particularly, in situ Raman spectroscopy reveals that oxygen vacancies in the ceria lattice do not form in significant amounts until advanced reaction degrees, whereas pulse O2 isotopic tests confirm the involvement of catalyst oxygen in the CO and H2 oxidation processes occurring at all stages of the CO-PROX reaction (Mars–van Krevelen). Further mechanistic insights are provided by operando near-ambient pressure X-ray photoelectron spectroscopy (NAP–XPS) and near edge X-ray absorption fine structure (NEXAFS) experiments, which prove the gradual CuO reduction and steady oxidized state of Ce ions until the very surface reduction of CeO2 at the point of selectivity loss. Experiments are complemented by density functional theory (DFT) calculations, which reveal a more facile oxygen refill according to the trend CuO > CeO2 > Cu2O. Overall, this work concludes that the oxygen recovery mechanism in CO-PROX switches from a direct mechanism, wherein oxygen restores vacancy sites in the partially reduced CuO particles, to a synergistic mechanism with the participation of ceria once CuxO particles reach a critical reduction state. This mechanistic switch ultimately results in a decrease in CO conversion in favor of the undesired H2 oxidation, which opens-up future research on potential strategies to improve oxygen recovery.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Isotopic and in situ DRIFTS study of the CO2 methanation mechanism using Ni/CeO2 and Ni/Al2O3 catalysts

  • Cárdenas-Arenas, Andrea
  • Quindimil, Adrián
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • De-La-Torre, Unai
  • Pereda-Ayo, Beñat
  • González-Marcos, José A.
  • González-Velasco, Juan R.
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Cárdenas-Arenas, Andrea|||/items/876a2177-4ebf-4f0a-8e5f-f1e4998f01b0
The CO2 methanation mechanism was studied for Ni/CeO2 and Ni/Al2O3 catalysts. The higher methanation activity and selectivity of Ni/CeO2 is attributed to: i) Ni/CeO2 combines two types of active sites efficient for CO2 dissociation at the NiO-Ceria interface and for H2 dissociation on Ni0 particles; ii) water desorption is the slowest mechanism step, and, due to the high oxygen mobility throughout the ceria lattice, water is not necessarily formed on the same active sites that chemisorb CO2, i.e., the CO2 chemisorption sites are not blocked by water molecules; iii) the Ni/CeO2 surface does not accumulate carbon-containing species under reaction conditions, which allows faster chemisorption and dissociation of CO2. The Ni/Al2O3 catalyst handicaps are that all the steps of the mechanism take place on the same active sites, and the slow release of water and the accumulation of surface formates on these sites delay the chemisorption of further CO2 molecules.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhancement of the Generation and Transfer of Active Oxygen in Ni/CeO2 Catalysts for Soot Combustion by Controlling the Ni–Ceria Contact and the Three-Dimensional Structure

  • Sellers Antón, Begoña
  • Bailón-García, Esther
  • Cárdenas-Arenas, Andrea
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Cárdenas-Arenas, Andrea|||/items/876a2177-4ebf-4f0a-8e5f-f1e4998f01b0
The effect of the three-dimensionally ordered macroporous (3DOM) structure and the Ni doping of CeO2 on the physicochemical properties and catalytic activity for soot combustion was studied. Moreover, the way in which Ni is introduced to the ceria support was also investigated. For this, CeO2 supports were synthesized with uncontrolled (Ref) and 3DOM-structured morphology, and their respective Ni/CeO2 catalysts were prepared by impregnation of the previously synthesized supports or by successive impregnation of both precursors (Ni and Ce) on the 3DOM template. Conclusions reached in this study are: (1) the 3DOM structure increases the surface area of the catalysts and improves the catalyst–soot contact. (2) The doping of CeO2 with Ni improves the catalytic activity because the NiO participates in the catalytic oxidation of NO to NO2, and also favors the production of active oxygen and the catalyst oxygen storage capacity. (3) Ni incorporation method affects its physicochemical and catalytic properties. By introducing Ni by successive infiltration in the solid template, the CeO2 crystal size is reduced, Ni dispersion is improved, and the catalyst reducibility is increased. All of these characteristics make the catalyst synthesized by successive infiltration to have higher catalytic activity for soot combustion than the Ni-impregnated CeO2 catalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Mineral Manganese Oxides as Oxidation Catalysts: Capabilities in the CO-PROX Reaction

  • Davó-Quiñonero, Arantxa
  • López-Rodríguez, Sergio
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Cryptomelane is an abundant mineral manganese oxide with unique physicochemical features. This work investigates the real capabilities of cryptomelane as an oxidation catalyst. In particular, the preferential CO oxidation (CO-PROX), has been studied as a simple reaction model. When doped with copper, the cryptomelane-based material has revealed a great potential, displaying a comparable activity to the high-performance CuO/CeO2. Despite stability concerns that compromise the primary catalyst reusability, CuO/cryptomelane is particularly robust in the presence of CO2 and H2O, typical components of realistic CO-PROX streams. The CO-PROX reaction mechanism has been assessed by means of isotopic oxygen pulse experiments. Altogether, CuO/CeO2 shows a greater oxygen lability, which facilitates lattice oxygen enrolment in the CO-PROX mechanism. In the case of CuO/cryptomelane, in spite of its lower oxygen mobility, the intrinsic structural water co-assists as active oxygen species involved in CO-PROX. Thus, the presence of moisture in the reaction stream turns out to be beneficial for the stability of the cryptomelane structure, besides aiding into the active oxygen restitution in the catalyst. Overall, this study proves that CuO/cryptomelane is a promising competitor to CuO/CeO2 in CO-PROX technology, whose implementation can bring the CO-PROX technology and H2 purification processes a more sustainable nature.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

PrOx catalysts for the combustion of soot generated in diesel engines: effect of CuO and 3DOM structures

  • Alcalde-Santiago, Virginia
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
PrOx and CuO/PrOx catalysts have been prepared with conventional (Ref) and three dimensionally ordered macroporous (3DOM) structures, and the effect of the structure on soot combustion has been studied. It has been demonstrated that the 3DOM structure significantly improves the catalytic combustion of soot with O2. The activity follows the trend PrOx-3DOM > CuO/PrOx-3DOM ∼ CuO/PrOx-Ref ≫ PrOx-Ref, which is explained considering two aspects: the production of active oxygen and its transfer from catalyst to soot. FESEM microscopy, N2 adsorption, Hg porosimetry and He density show that the 3DOM catalysts have ordered macroporosity with pores of 80 nm in diameter, which favors the carbon–catalyst contact. In addition, the 3DOM catalysts present higher surface density of active oxygen (Oads), which follows the trend CuO/PrOx-3DOM > PrOx-3DOM ∼ CuO/PrOx-Ref > PrOx-Ref. Consequently, the PrOx-3DOM catalyst combines a good production of active oxygen and an efficient transfer to soot, making it the most active catalyst to accelerate soot combustion. In contrast, PrOx-Ref is the least active since it is the least efficient in producing and transferring active oxygen. The impregnation of copper with the conventional support (CuO/PrOx-Ref) enhances the production and transfer of active oxygen, improving the activity with respect to PrOx-Ref. However, CuO blocks the porosity of the 3DOM support, hindering the contact with soot. Soot combustion is accelerated in the presence of NOx due to the production of NO2. This NO2, once produced, is mostly readsorbed on the surface of the catalysts producing active oxygen that must be transferred to soot. For this reason, the porosity of the catalysts also plays a relevant role during combustion with NOx/O2 because it affects the transfer of active oxygen produced by NO2 to soot.