Skip to main content

DISEÑO DE CATALIZADORES CON ORDEN TRIDIMENSIONAL PARA LA METANACION DE CO2

CTQ2015-67597-C2-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2015
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Dirección General de Investigación Científica y Técnica
Beneficiary centre UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of metal loading on the CO2 methanation: A comparison between alumina supported Ni and Ru catalysts

  • Quindimil, Adrián
  • De-La-Torre, Unai
  • Pereda-Ayo, Beñat
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • González-Marcos, José A.
  • Bueno López, Agustín
  • González-Velasco, Juan R.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The hydrogenation of CO2 into CH4 from H2 produced by renewable energy is considered an interesting alternative in order to promote the development of such green energies. In the present work, the effect of Ni and Ru loadings on the catalytic performance of alumina-supported catalysts is studied for CO2 methanation reaction. All catalysts were prepared by wetness incipient impregnation, characterized by several techniques (N2-physisorption, CO2-TPD, XRD, H2-chemisorption, XPS and H2-TPR) and evaluated for CO2 methanation in a fixed bed reactor at GHSV=10,000 h−1 and W/FCO2 0 = 4.7 (g cat.) h mol−1. Characterization results showed that addition of increasing loadings of Ni and Ru lead to the formation of both CO2 adsorption and H2 dissociation active sites, which are necessary to carry out CO2 hydrogenation into methane. Easily reducible ruthenium was dispersed on γ-Al2O3 in form of large agglomerates, whereas Ni was better dispersed presenting a great interaction with the support. 12% Ni and 4% Ru resulted to be the optimal contents providing metal surfaces of 5.1 and 0.6m2 g−1, T50 values of 340 and 310 °C and activity being quite stable for 24 h-on-stream. In terms of turnover frequency (TOF), 4%Ru/Al2O3 catalyst was quite more efficient than 12%Ni/Al2O3, probably due to a greater ability of ruthenium to dissociate hydrogen. The apparent activation energies for alumina supported Ni and Ru were 129 and 84 kJ mol−1, respectively.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Key‐lock Ceria Catalysts for the Control of Diesel Engine Soot Particulate Emissions

  • Sorolla-Rosario, Débora
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A new concept, referred to as key‐lock catalyst, is presented in this article. Soot combustion ceria catalysts were prepared combining hard (polymethylmethacrylate colloidal crystals) and soft (Pluronic F127) templates, tuning the porosity of ceria in different size ranges to match the morphology of soot aggregates. The catalysts porosity was characterized in detail by N2 adsorption‐desorption isotherms and Hg‐porosimetry. XRD and H2‐TPR characterization ruled out that differences in activity are related neither with crystallographic nor with redox properties. As a proof of key‐lock catalyst concept, an optimum key‐lock ceria catalyst was synthesized by combining large macropores (100–300 nm) with mesopores (10–30 nm), because they fit to the large soot aggregates and to primary soot particles sizes, respectively. The best soot combustion activity of the optimum key‐lock catalyst is attributed to the optimum transfer of ceria active oxygen from catalyst to soot. The catalytic results confirmed that all ceria catalysts prepared with different porosity oxidize NO to NO2 at the same rate, and the NO2‐assisted soot combustion pathway is not affected by tuning ceria porosity. This double‐templated synthesis and the key‐lock concept opens a new synthesis approach to design noble‐metal free soot combustion catalysts based on the highly effective active oxygen mechanism.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Elucidating the Role of the Metal Catalyst and Oxide Support in the Ru/CeO2-Catalyzed CO2 Methanation Mechanism

  • López-Rodríguez, Sergio
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Herrera, Facundo C.
  • Pellegrin, Eric
  • Escudero, Carlos
  • García-Melchor, Max
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
This study addresses the yet unresolved CO2 methanation mechanism on a Ru/CeO2 catalyst by means of near-ambient-pressure X-ray photoelectron spectroscopy (NAP–XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) complemented with periodic density functional theory (DFT) calculations. NAP–XPS results show that the switch from H2 to CO2 + H2 mixture oxidizes both the Ru and CeO2 phases at low temperatures, which is explained by the CO2 adsorption modes assessed by means of DFT on each representative surface. CO2 adsorption on Ru is dissociative and moderately endergonic, leading to polybonded Ru-carbonyl groups whose hydrogenation is the rate-determining step in the overall process. Unlike on Ru metal, CO2 can be strongly adsorbed as carbonates on ceria surface oxygen sites or on the reduced ceria at oxygen vacancies as carboxylates (CO2–δ), resulting in the reoxidation of ceria. Carboxylates can then evolve as CO, which is released either via direct splitting at relatively low temperatures or through stable formate species at higher temperatures. DRIFTS confirm the great stability of formates, whose depletion relates with CO2 conversion in the reaction cell, while carbonates remain on the surface up to higher temperatures. CO generation on ceria serves as an additional reservoir of Ru-carbonyls, cooperating to the overall CO2 methanation process. Altogether, this study highlights the noninnocent role of the ceria support in the performance of Ru/CeO2 toward CO2 methanation.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Three-dimensionally ordered macroporous PrOx: An improved alternative to soot combustion ceria catalysts

  • Alcalde-Santiago, Virginia
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The synthesis and use for soot combustion of praseodymium oxide with three-dimensionally ordered macroporous (3DOM) structure is described. This novel PrOx-3DOM catalyst is presented as an improved novel metal-free alternative to CeO2 as soot combustion catalyst. The PrOx-3DOM catalyst presents a well-defined 3DOM structure with high macropores volume, which significantly enhances the solid-solid soot-catalyst contact. This enhanced contact, together with the improved reducibility of PrOx regarding CeO2, ameliorate the active oxygen production and its transfer to soot particles, improving the soot combustion with O2. In addition, the higher ability of PrOx to oxidize NO to NO2, improves the soot combustion in a higher extent than CeO2 in presence of NOx. The catalytic activity of PrOx-3DOM after several soot combustion cycles is also confirmed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Shaping a soot combustion Ce0.5Pr0.5Ox catalyst

  • Sellers Antón, Begoña
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A Ce0.5Pr0.5Ox soot combustion catalyst has been shaped combining this material prepared in two different structures (nanoparticles and MS-macroporous) in a single active phase. Nanoparticles, prepared by reversed microemulsion method, provide high activity to the hybrid material, and the MS structure, obtained by a hard template synthesis method, provides high thermal stability and improved soot-catalyst contact. Ce0.5Pr0.5Ox nanoparticles present high surface area (148 m2/g; 5 nm) and improved redox properties with regard to other Ce0.5Pr0.5Ox structures, and the macropores size of MS Ce0.5Pr0.5Ox are large enough (around 100 nm) to properly disperse Ce0.5Pr0.5Ox nanoparticles inside and also to host soot particles, creating a high reactive catalyst environment. As a result, the as prepared Ce0.5Pr0.5Ox hybrid catalyst, mixed in loose-contact mode with soot, decreased soot combustion by ca. 100 °C with regard to the uncatalyzed reaction, and thermal aging at 800 °C only decreased this difference to ca. 75 °C. The as-prepared counterpart hybrid catalyst obtained dispersing pure ceria nanoparticles on pure ceria MS support was also active for soot combustion, but the activity was almost lost completely upon thermal aging due to ceria sintering.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

PrOx nanoparticles: active and stable catalysts for soot combustion

  • Sellers Antón, Begoña
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
PrOx nanoparticles (10nm; 81m2/g) were synthesized and analysed as soot combustion catalyst in comparation with other reference materials including CeO2 nanoparticles and PrOx and CeO2 catalysts with three dimensionally ordered (3DOM) and without controlled structure. PrOx nanoparticles reached the highest activity; T50 decreases from 603 °C (uncatalysed combustion) to 494 °C. This high activity can be attributed to the high surface area/low crystal size, which enhances the soot catalyst contact, and to the improved reducibility. PrOx nanoparticles kept high activity (T50 = 520 °C) after aging at 800 °C, being significantly more active than aged PrOx catalysts with 3DOM and uncontrolled structure and also significantly more active than all aged CeO2 catalysis which suffer almost total deactivation upon aging. In all cases, PrOx catalysts are more active than CeO2 counterpart materials with the same structure and thermal history, and this applies to nanoparticles, 3DOM and uncontrolled structures.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Ni/LnOx catalysts (Ln = La, Ce or Pr) for CO2 methanation

  • Alcalde-Santiago, Virginia
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Quindimil, Adrián
  • De-La-Torre, Unai
  • Pereda-Ayo, Beñat
  • González-Marcos, José A.
  • González-Velasco, Juan R.
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The effect of the LnOx support has been studied for Ni‐based CO2 methanation catalysts. 10 wt. % nickel catalysts with LaOx, CeO2 and PrOx supports have been prepared, characterized by N2 adsorption, XRD, XRF, TG‐MS (N2‐TPD and H2‐TPR) and XPS, and have been tested for CO2 methanation. The catalytic activity follows the trend Ni/CeO2 > Ni/PrOx >> Ni/LaOx, all catalysts being very selective towards CH4 formation. The activity depends both on the nature of the catalytic active sites and on the stability of the surface CO2 and H2O species. Ni/CeO2 is the most active catalyst because (i) the Ni2+‐ceria interaction leads to the formation of the highest population of active sites for CO2 dissociation, (ii) the reduced Ni0 sites where H2 dissociation takes place are the most electronegative and active, and (iii) the stability of surface CO2 and H2O species is lowest. Ni/LaOx achieves lower activity because of the strong chemisorption of H2O and CO2, which poison the catalyst surface, and because this support is not able to promote the formation of highly active sites for CO2 and H2 dissociation. The behavior of Ni/PrOx is intermediate, being slightly lower to that of Ni/CeO2 because the formation of active sites is not so efficient and because the stability of chemisorbed CO2 is slightly higher.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Design of Monolithic Supports by 3D Printing for Its Application in the Preferential Oxidation of CO (CO-PrOx)

  • Chaparro-Garnica, Cristian Yesid
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Honeycomb-shaped cordierite monoliths are widely used as supports for a large number of industrial applications. However, the high manufacturing cost of cordierite monoliths only justifies its use for high temperatures and aggressive chemical environments, demanding applications where the economic benefit obtained exceeds the manufacturing costs. For low demanding applications, such as the preferential oxidation of CO (CO-PrOx), alternative materials can be proposed to reduce manufacturing costs. Polymeric monoliths would be an interesting low-cost alternative; however, the limitations of the active phase incorporation to the polymeric support must be overcome. In this work, the implementation and use of polymeric monolithic structures obtained by three-dimensional printing to support CuO/CeO2 catalysts for CO-PrOx have been studied. Several approaches were used to anchor the active phase into the polymeric monoliths, such as adding inorganic materials (carbon or silica) to the polymer previous to the printing process, chemical attack with solvents of the printed resin before or during the active phase incorporation, and consecutive impregnation and modification of the channel wall design. Among those approaches, best results were obtained by the addition of silica and by channel modification. Independent of the strategy followed, a subsequent thermal treatment in N2 was required to soften the resin and favor the active phase anchoring. However, catalyst particles become embedded on the polymeric resin being not active, and thus, a final cleaning thermal treatment under air was needed to recover the active phase activity, after which the supported active phase demonstrated good catalytic activity, stability, and reusability.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

CO-PROX Reaction over Co3O4|Al2O3 Catalysts—Impact of the Spinel Active Phase Faceting on the Catalytic Performance

  • Grzybek, Gabriela
  • Ciura, Klaudia
  • Gryboś, Joanna
  • Indyka, Paulina
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Kotarba, Andrzej
  • Sojka, Zbigniew
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A series of α-alumina-supported cobalt spinel catalysts of various expositions of the (100), (111), and (110) planes was synthesized and tested in the preferential oxidation of CO (CO-PROX) reaction. Successful control of the polyhedral shape of the nanospinel active phase was achieved via glycerol and/or Zn addition to the impregnation solution. This allowed for the application of such catalysts for resolving the shape–reactivity relationships in a more controlled fashion in comparison to previous studies, where various catalysts of an entirely unlike origin were used. The catalysts were thoroughly characterized by means of X-ray fluorescence, X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning transmission electron microscopy, and temperature-programmed reduction techniques. The CO-PROX catalytic performance of the obtained catalysts was examined in the temperature-programmed surface reaction mode. A strong impact of the spinel nanograin morphology on the activity was observed, with the (100) termination found as the most active among all of the exposed low-index (111) and (110) planes. Furthermore, a linear correlation between the abundance of the surface Co3+ cations and the yield of carbon monoxide oxidation reveals their vital relevance as the catalytically CO-PROX active sites. The results are discussed in terms of a thermodynamic diagram of the surface oxygen, water, and oxygen vacancy stabilities on the Co3O4 most abundant planes, providing the rational background for the superior behavior of the (100) termination in the CO-PROX reaction. The obtained results speak in favor of the involvement of the suprafacial oxygen species in the CO oxidation process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Insights into the Oxygen Vacancy Filling Mechanism in CuO/CeO2 Catalysts: A Key Step Toward High Selectivity in Preferential CO Oxidation

  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • López-Rodríguez, Sergio
  • Juan Juan, Jerónimo
  • Lozano-Castello, Dolores
  • García-Melchor, Max
  • Herrera, Facundo C.
  • Pellegrin, Eric
  • Escudero, Carlos
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The preferential CO oxidation (CO-PROX) reaction is paramount for the purification of reformate H2-rich streams, where CuO/CeO2 catalysts show promising opportunities. This work sheds light on the lattice oxygen recovery mechanism on CuO/CeO2 catalysts during CO-PROX reaction, which is critical to guarantee both good activity and selectivity, but that is yet to be well understood. Particularly, in situ Raman spectroscopy reveals that oxygen vacancies in the ceria lattice do not form in significant amounts until advanced reaction degrees, whereas pulse O2 isotopic tests confirm the involvement of catalyst oxygen in the CO and H2 oxidation processes occurring at all stages of the CO-PROX reaction (Mars–van Krevelen). Further mechanistic insights are provided by operando near-ambient pressure X-ray photoelectron spectroscopy (NAP–XPS) and near edge X-ray absorption fine structure (NEXAFS) experiments, which prove the gradual CuO reduction and steady oxidized state of Ce ions until the very surface reduction of CeO2 at the point of selectivity loss. Experiments are complemented by density functional theory (DFT) calculations, which reveal a more facile oxygen refill according to the trend CuO > CeO2 > Cu2O. Overall, this work concludes that the oxygen recovery mechanism in CO-PROX switches from a direct mechanism, wherein oxygen restores vacancy sites in the partially reduced CuO particles, to a synergistic mechanism with the participation of ceria once CuxO particles reach a critical reduction state. This mechanistic switch ultimately results in a decrease in CO conversion in favor of the undesired H2 oxidation, which opens-up future research on potential strategies to improve oxygen recovery.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Active, selective and stable NiO-CeO2 nanoparticles for CO2 methanation

  • Cárdenas-Arenas, Andrea
  • Soriano Cortés, Helena
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Cárdenas-Arenas, Andrea|||/items/876a2177-4ebf-4f0a-8e5f-f1e4998f01b0
CO2 hydrogenation to CH4 (or methanation) has been proposed to diminish CO2 emissions producing a valuable fuel. A catalyst consisting of NiO-CeO2 mixed oxide 6–7 nm nanoparticles with enhanced properties has been prepared, and compared with other NiO-CeO2 reference catalysts including a mixed oxide with the same composition but without control of the size, a counterpart NiO-CeO2 mixed oxide with three dimensionally ordered macroporous (3DOM) structure and an inverse catalyst consisting of bulk NiO-supported CeO2 nanoparticles among others. At 275 °C the CO2 methanation rate is near 3 times higher to that achieved with the counterpart reference catalyst prepared without control of the size, being more active than all reference catalysts. The selectivity towards CH4 formation is ~100% in the whole range of temperature studied (until 500 °C), and kept the same activity and selectivity during a 25 h long-term test. The high activity of this catalyst is related with its high specific surface area (122 m2/g) and with the presence of highly-reducible Ni-O-Ce species on the nanoparticles surface.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effect of Pr in CO2 Methanation Ru/CeO2 Catalysts

  • López-Rodríguez, Sergio
  • Davó-Quiñonero, Arantxa
  • Juan Juan, Jerónimo
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
CO2 methanation has been studied with Pr-doped Ru/CeO2 catalysts, and a dual effect of Pr has been observed. For low Pr content (i.e., 3 wt %) a positive effect in oxygen mobility prevails, while for high Pr doping (i.e., 25 wt %) a negative effect in the Ru–CeO2 interaction is more relevant. Isotopic experiments evidenced that Pr hinders the dissociation of CO2, which takes place at the Ru–CeO2 interface. However, once the temperature is high enough (200 °C), Pr improves the oxygen mobility in the CeO2 support, and this enhances CO2 dissociation because the oxygen atoms left are delivered faster to the support sink and the dissociation sites at the interface are cleaned up faster. In situ Raman spectroscopy experiments confirmed that Pr improves the creation of oxygen vacancies on the ceria lattice but hinders their reoxidation by CO2, and both opposite effects reach an optimum balance for 3 wt % Pr doping. In addition, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments showed that Pr doping, regardless of the amount, decreases the population of surface carbon species created on the catalysts surface upon CO2 chemisorption under methanation reaction conditions, affecting both productive reaction intermediates (formates and carbonyls) and unproductive carbonates.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Customizable Heterogeneous Catalysts: Nonchanneled Advanced Monolithic Supports Manufactured by 3D-Printing for Improved Active Phase Coating Performance

  • Chaparro-Garnica, Cristian Yesid
  • Jordà-Faus, Pepe
  • Bailón-García, Esther
  • Ocampo-Pérez, Raúl
  • Aguilar-Madera, Carlos G.
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Jordà-Faus, Pepe|||/items/cd1fe095-7837-4daf-9c89-d92bc3b5ac53
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Three-dimensional (3D)-printed catalysts are being increasingly studied; however, most of these studies focus on the obtention of catalytically active monoliths, and thus traditional channeled monolithic catalysts are usually obtained and tested, losing sight of the advantages that 3D-printing could entail. This work goes one step further, and an advanced monolith with specifically designed geometry has been obtained, taking advantage of the versatility provided by 3D-printing. As a proof of concept, nonchanneled advanced monolithic (NCM) support, composed of several transversal discs containing deposits for active phase deposition and slits through which the gas circulates, was obtained and tested in the CO-PrOx reaction. The results evidenced that the NCM support showed superior catalytic performance compared to conventional channeled monoliths (CMs). The region of temperature in which the active phase can work under chemical control, and thus in a more efficient way, is increased by 31% in NCM compared to the powdered or the CM sample. Turbulence occurs inside the fluid path through the NCM, which enhances the mass transfer of reagents and products toward and from the active sites to the fluid bulk favoring the chemical reaction rate. The nonchanneled monolith also improved heat dispersion by the tortuous paths, reducing the local temperature at the active site. Thus, the way in which reactants and products are transported inside the monoliths plays a crucial role, and this is affected by the inner geometry of the monoliths.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the soot combustion mechanism using 3DOM ceria catalysts

  • Alcalde-Santiago, Virginia
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
CeO2 catalysts have been prepared with conventional (Ref) and three dimensionally order macroporous (3DOM) structures, and the effect of the structure on the soot combustion mechanism has been studied in detail. Isotopic exchange experiments showed that the CeO2-3DOM catalyst produces more active oxygen upon O2 chemisorption than the counterpart CeO2-Ref catalyst, and this active oxygen is transferred more efficiently to soot due to the macroporous structure. CeO2-3DOM and CeO2-Ref also accelerate the oxidation of NO to NO2, and their activity is equal. However, CeO2-3DOM utilizes NO2 more efficiently than CeO2-Ref for soot combustion. NO2 has two roles in the soot combustion mechanism: i) reacts with soot and ii) is chemisorbed on ceria and produces active oxygen, which is more oxidizing than NO2. In ceria catalysts with a conventional structure, the main role of NO2 is the direct oxidation of soot, because active oxygen has restrictions to be transferred from catalyst to soot due to the poor soot-catalyst solid-solid contact. However, the 3DOM structure improves the transfer of active oxygen, and therefore, an additional benefit is obtained from NO2, that is, NO2 contributes to active oxygen production and the 3DOM structure allows its efficient transference to soot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Sponge-like carbon monoliths: porosity control of 3D-printed carbon supports and its influence on the catalytic performance

  • Chaparro-Garnica, Cristian Yesid
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Sponge-like carbon monoliths with tailored channel architecture and porosity were prepared by combining sol-gel polymerization and 3D printing technology. The pore size distribution (PSD) and macropore volume were controlled by varying the water concentration used in the synthesis. The size and interconnection degree of primary particles, and consequently the pore width and macropores volume, increases by increasing the water concentration. However, a more heterogeneous PSD was detected at high water concentration, due to the better-defined spheres-like morphology of primary particles which leaves voids and corners between fused spheres together with bigger macropores leaves by the coral-like structure. The role of this porosity control on the CuO/CeO2 catalytic performance was pointed out in the CO-PrOx reaction. The CuO/CeO2 dispersion and distribution along the carbon network increases by increasing the water concentration, i.e. the pore width and macropore volume, enhancing the catalytic activity. However, this improvement is not observed at high water concentration in which preferential flow pathways are created favored by the heterogeneous PSD. This manifest that the porosity control plays an important role in the catalytic performance of monolithic catalysts and thus, the monolithic support must be specifically designed to optimize the catalytic performance of active phases for each application.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Templated Synthesis of Pr-Doped Ceria with Improved Micro and Mesoporosity Porosity, Redox Properties and Catalytic Activity

  • Davó-Quiñonero, Arantxa
  • González Mira, Jorge
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A Ce0.9Pr0.1O2 catalyst has been prepared using nitrates as metal precursors, which have been infiltrated into a polymethylmethacrylate colloidal crystal template and calcined at 500 °C. Its catalytic activity for CO oxidation (4.3 μmolCO s−1 gcatalyst −1 at 300 °C) is far superior compared to a reference catalyst prepared in the same way but without the template (1.4 μmolCO s−1 gcatalyst −1 at 300 °C), and even superior to a three dimensionally ordered macroporous (3DOM) catalyst prepared forming metal citrates to obtain the macroporous structure into the template (0.7 μmolCO s−1 gcatalyst −1 at 300 °C). It is demonstrated that infiltration of nitrates into the colloidal crystal template is more positive for catalytic oxidation of CO than formation of the 3DOM structure using citrates, despite the collapse of the macroporous structure. The 3DOM catalyst prepared with citrates has lower surface area (51 m2 g−1) than catalysts prepared using nitrates (118 and 87 m2 g−1 for the infiltrated and non infiltrated catalysts, respectively). The infiltrated catalyst prepared with nitrates reaches the highest surface area, and also develops more micro and mesoporosity and presents smaller crystallite size (8 vs. 16 nm) than the counterpart non infiltrated catalyst. In addition, the population of oxygen vacancies is also much higher in the infiltrated catalyst prepared with nitrates, and it is postulated that this improves oxygen mobility into the mixed oxide lattice and favors the catalyst reduction. On the contrary, it has been ruled out any effect of the infiltration step in the insertion of Pr cations into the ceria lattice.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Unexpected stability of CuO/Cryptomelane catalyst under Preferential Oxidation of CO reaction conditions in the presence of CO2 and H2O

  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The catalytic activity of CuO/Cryptomelane for the preferential oxidation of CO in H2-rich streams has been studied in the absence and presence of H2O and CO2, paying special attention to the catalyst stability and to changes on its physical-chemical properties under CO-PROX reaction conditions. For fresh CuO/cryptomelane catalyst, the presence of CO2 and/or H2O in the CO-PROX feed partially inhibits CO oxidation due to chemisorption of H2O and CO2 on the catalyst. H2O chemisorption on CuO/Cryptomelane is stronger than CO2 chemisorption, and simultaneous CO2 and H2O adsorption has a synergetic effect that enhances co-adsorption and significantly hinders CO oxidation. On the contrary, the presence of CO2 + H2O in the CO-PROX reaction mixture has a positive effect in the CuO/Cryptomelane stability upon several consecutive reaction cycles in the 25–200 °C range. XRD showed that chemisorbed CO2 + H2O species partially prevent the catalyst deactivation due to cryptomelane reduction to hausmannite (Mn3O4) under the strongly reductive environment of the CO-PROX reaction, and H2-TPR and Raman spectroscopy characterisation support that the cryptomelane structure is less damaged under CO-PROX conditions in the presence of CO2 and H2O than in the absence of these species. Therefore, interestingly under CO2 + H2O environment (realistic CO-PROX conditions) CuO/Cryptomelane catalyst performs an improved catalytic activity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

New insights into the role of active copper species in CuO/Cryptomelane catalysts for the CO-PROX reaction

  • Davó-Quiñonero, Arantxa
  • Such-Basañez, Ion
  • Juan Juan, Jerónimo
  • Lozano-Castello, Dolores
  • Stelmachowski, Paweł
  • Grzybek, Gabriela
  • Kotarba, Andrzej
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Nominally different Cu contents have been loaded on synthetic Cryptomelane oxide and the resulting CuO/Cryptomelane catalysts have been tested in the CO-PROX reaction. Catalytic activity was assessed in terms of the tunable synergistic interaction between copper and cryptomelane. This work entails the use of conventional characterization techniques such as XRD, Raman, FE-SEM, XPS with complementary DFT simulation. Additionally, it is reported for the first time, in-situ Work Function measurements of CO and O2 interaction in CuO/Cryptomelane catalysts. Results reveal the strong influence of the interfacial properties on CuO/Cryptomelane reducibility, where Cu+ species are formed by means of redox interplay between Cu+2/Cu+ and Mn3+/ Mn4+. The optimal performance is achieved by the efficient participation of two active species: (1) Cu+ from an intimate MnOx contact, providing the active sites for CO oxidation; and (2) surface Cu+ species stabilized in CuO bulky particles for the efficient O2 refilling.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

High Performance Tunable Catalysts Prepared by Using 3D Printing

  • Chaparro-Garnica, Cristian Yesid
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Da Costa, Patrick
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Honeycomb monoliths are the preferred supports in many industrial heterogeneous catalysis reactions, but current extrusion synthesis only allows obtaining parallel channels. Here, we demonstrate that 3D printing opens new design possibilities that outperform conventional catalysts. High performance carbon integral monoliths have been prepared with a complex network of interconnected channels and have been tested for carbon dioxide hydrogenation to methane after loading a Ni/CeO2 active phase. CO2 methanation rate is enhanced by 25% at 300 °C because the novel design forces turbulent flow into the channels network. The methodology and monoliths developed can be applied to other heterogeneous catalysis reactions, and open new synthesis options based on 3D printing to manufacture tailored heterogeneous catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Macroporous carrier-free Sr-Ti catalyst for NOx storage and reduction

  • Alcalde-Santiago, Virginia
  • Davó-Quiñonero, Arantxa
  • Such-Basañez, Ion
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
A novel concept is presented, consisting of a macroporous carrier-free catalyst. As a proof of concept, a novel Cu-containing Sr-Ti NSR catalyst with a macroporous network has been synthesized, and its maximum NOx storage capacity (1500 μmolNOx/gcatalyst) significantly surpasses that of conventional Pt/Ba/Al2O3 formulations (∼600–800 μmolNOx/gcatalyst). This high NOx storage capacity is achieved because the active phases (mainly SrCO3 and Cu-containing Sr-Ti perovskites, as deduced by XRD) are not diluted in an inert carrier, and this can be done because the macroporous structure obtained using a polymethylmethacrylate colloidal crystal template allows the access of gases to the particles bulk. In situ DRIFTS experiments showed that NOx were chemisorbed on the novel Cu-containing Sr-Ti macroporous catalyst as a mixture of nitrite and nitro species, and this suggests that several NOx chemisorption pathways are simultaneously taking place probably involving chemisorption of both NO and NO2. Additionally, this novel catalyst is totally selective towards N2 formation as NOx reduction product, without traces of N2O nor NH3. CO2 and H2O compete with NOx for being chemisorbed on the catalyst, and this hinders the utilization of this catalyst in real diesel exhausts. However, we believe that this new concept of macroporous carrier-free catalyst could be extended to other heterogeneous catalyzed reactions or materials to avoid the diluting effect of the catalyst support.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Isotopic and in situ DRIFTS study of the CO2 methanation mechanism using Ni/CeO2 and Ni/Al2O3 catalysts

  • Cárdenas-Arenas, Andrea
  • Quindimil, Adrián
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • De-La-Torre, Unai
  • Pereda-Ayo, Beñat
  • González-Marcos, José A.
  • González-Velasco, Juan R.
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Cárdenas-Arenas, Andrea|||/items/876a2177-4ebf-4f0a-8e5f-f1e4998f01b0
The CO2 methanation mechanism was studied for Ni/CeO2 and Ni/Al2O3 catalysts. The higher methanation activity and selectivity of Ni/CeO2 is attributed to: i) Ni/CeO2 combines two types of active sites efficient for CO2 dissociation at the NiO-Ceria interface and for H2 dissociation on Ni0 particles; ii) water desorption is the slowest mechanism step, and, due to the high oxygen mobility throughout the ceria lattice, water is not necessarily formed on the same active sites that chemisorb CO2, i.e., the CO2 chemisorption sites are not blocked by water molecules; iii) the Ni/CeO2 surface does not accumulate carbon-containing species under reaction conditions, which allows faster chemisorption and dissociation of CO2. The Ni/Al2O3 catalyst handicaps are that all the steps of the mechanism take place on the same active sites, and the slow release of water and the accumulation of surface formates on these sites delay the chemisorption of further CO2 molecules.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Stable NiO–CeO2 nanoparticles with improved carbon resistance for methane dry reforming

  • Cárdenas-Arenas, Andrea
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Da Costa, Patrick
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Cárdenas-Arenas, Andrea|||/items/876a2177-4ebf-4f0a-8e5f-f1e4998f01b0
High surface area mixed oxide 8.7% NiO-CeO2 nanoparticles (122 m2/g; 6–7 nm) were prepared using a reversed microemulsion method, and were tested for dry methane reforming (DRM). The catalytic activity of these nanoparticles remains stable under the severe conditions of DRM (700 °C), and they show better carbon resistance than conventional NiO-CeO2 catalysts prepared without control of the size. The activity and selectivity of nanoparticles and reference catalyst are similar, but nanoparticles reduce by 63% the accumulation of carbon during the DRM tests, which is a key feature for this reaction. XPS and H2-TPR suggest that the improved carbon resistance of the nanoparticles is the better interaction and cooperation between NiO and CeO2 mixed phases. In nanoparticles, the participation of cerium cations in the redox processes taking place during DRM stabilize cationic species of nickel. On the contrary, the catalyst prepared without control of the size suffered segregation of Ni during DRM reaction, and segregated Ni explains the higher catalytic formation of carbon.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

NOx storage and reduction over copper-based catalysts. Part 2: Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd)

  • Bueno López, Agustín
  • Lozano-Castello, Dolores
  • Anderson, James A.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
5% copper catalysts with Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd) have been studied by rapid-scan operando DRIFTS for NOx Storage and Reduction (NSR) with high frequency (30 s) CO, H2 and 50%CO + 50%H2 micropulses. In the absence of reductant pulses, below 200–250 °C NOx was stored on the catalysts as nitrite and nitro groups, and above this temperature nitrates were the main species identified. The thermal stability of the NOx species stored on the catalysts depended on the acid/basic character of the dopant (M more acidic = NOx stored less stable ⇒ Zr4+ < none < Nd3+ < Pr3+ < La3+ ⇐ M more basic = NOx stored more stable). Catalysts regeneration was more efficient with H2 than with CO, and the CO + H2 mixture presented an intermediate behavior, but with smaller differences among the series of catalyst than observed using CO alone. N2 is the main NOx reduction product upon H2 regeneration. The highest NOx removal in NSR experiments performed at 400 °C with CO + H2 pulses was achieved with the catalyst with the most basic dopant (CuO/Ce0.8La0.2Oδ) while the poorest performing catalyst was that with the most acidic dopant (CuO/Ce0.8Zr0.2Oδ). The poor performance of CuO/Ce0.8Zr0.2Oδ in NSR experiments with CO pulses was attributed to its lower oxidation capacity compared to the other catalysts.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Enhancement of the Generation and Transfer of Active Oxygen in Ni/CeO2 Catalysts for Soot Combustion by Controlling the Ni–Ceria Contact and the Three-Dimensional Structure

  • Sellers Antón, Begoña
  • Bailón-García, Esther
  • Cárdenas-Arenas, Andrea
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Cárdenas-Arenas, Andrea|||/items/876a2177-4ebf-4f0a-8e5f-f1e4998f01b0
The effect of the three-dimensionally ordered macroporous (3DOM) structure and the Ni doping of CeO2 on the physicochemical properties and catalytic activity for soot combustion was studied. Moreover, the way in which Ni is introduced to the ceria support was also investigated. For this, CeO2 supports were synthesized with uncontrolled (Ref) and 3DOM-structured morphology, and their respective Ni/CeO2 catalysts were prepared by impregnation of the previously synthesized supports or by successive impregnation of both precursors (Ni and Ce) on the 3DOM template. Conclusions reached in this study are: (1) the 3DOM structure increases the surface area of the catalysts and improves the catalyst–soot contact. (2) The doping of CeO2 with Ni improves the catalytic activity because the NiO participates in the catalytic oxidation of NO to NO2, and also favors the production of active oxygen and the catalyst oxygen storage capacity. (3) Ni incorporation method affects its physicochemical and catalytic properties. By introducing Ni by successive infiltration in the solid template, the CeO2 crystal size is reduced, Ni dispersion is improved, and the catalyst reducibility is increased. All of these characteristics make the catalyst synthesized by successive infiltration to have higher catalytic activity for soot combustion than the Ni-impregnated CeO2 catalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

NOx storage and reduction over copper-based catalysts. part 3: Simultaneous NOx and soot removal

  • Bueno López, Agustín
  • Lozano-Castello, Dolores
  • McCue, Alan J.
  • Anderson, James A.
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
5% copper catalysts with Ce0.8M0.2Oδ supports (M = Zr, La, Ce, Pr or Nd) were studied for the simultaneous combustion of soot and removal of NOx by the NSR method. The simultaneous chemisorption of NOx and combustion of soot could be carried out above 375 °C, and nitrates were formed upon NOx chemisorption above this temperature. The nature of the M dopant played an important role in the chemisorption of NOx and in the catalysed soot-NOx reaction. As a general trend, the presence of soot had a negative impact on NOx removal by catalysts with very basic supports but had no effect or a positive influence if the support is not very basic. The combustion of soot has a very negative impact for NOx chemisorption on the catalyst with the most basic dopant (CuO/Ce0.8La0.2Oδ), because the CO2 formed in the reaction of soot combustion competes with NOx for adsorption sites. On the other hand, soot combustion does not affect NOx chemisorption on the catalyst with the most acidic dopant (CuO/Ce0.8Zr0.2Oδ), and the removal of NOx increases in this case because the reduction of NOx by soot contributes to NOx removal. The simultaneous reduction of NOx to N2 and soot combustion can be carried out under NSR conditions at 400 °C over the 5%Cu/Ce0.8Pr0.2Oδ catalyst and with H2 micropulses, and the NSR process has a positive impact on the catalytic combustion of soot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Mineral Manganese Oxides as Oxidation Catalysts: Capabilities in the CO-PROX Reaction

  • Davó-Quiñonero, Arantxa
  • López-Rodríguez, Sergio
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
Cryptomelane is an abundant mineral manganese oxide with unique physicochemical features. This work investigates the real capabilities of cryptomelane as an oxidation catalyst. In particular, the preferential CO oxidation (CO-PROX), has been studied as a simple reaction model. When doped with copper, the cryptomelane-based material has revealed a great potential, displaying a comparable activity to the high-performance CuO/CeO2. Despite stability concerns that compromise the primary catalyst reusability, CuO/cryptomelane is particularly robust in the presence of CO2 and H2O, typical components of realistic CO-PROX streams. The CO-PROX reaction mechanism has been assessed by means of isotopic oxygen pulse experiments. Altogether, CuO/CeO2 shows a greater oxygen lability, which facilitates lattice oxygen enrolment in the CO-PROX mechanism. In the case of CuO/cryptomelane, in spite of its lower oxygen mobility, the intrinsic structural water co-assists as active oxygen species involved in CO-PROX. Thus, the presence of moisture in the reaction stream turns out to be beneficial for the stability of the cryptomelane structure, besides aiding into the active oxygen restitution in the catalyst. Overall, this study proves that CuO/cryptomelane is a promising competitor to CuO/CeO2 in CO-PROX technology, whose implementation can bring the CO-PROX technology and H2 purification processes a more sustainable nature.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Copper‐Lanthanum Catalysts for NOx and Soot Removal

  • Alcalde-Santiago, Virginia
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
The individual and simultaneous removal of NOx by Storage and Reduction with H2 (H2‐NSR) and combustion of soot have been studied for La and CuLa catalysts. The NOx storage capacity of pure lanthanum oxide is improved either by copper addition or by using a colloidal crystal hard template for the synthesis of a macroporous structure. Although the NOx storage capacity of the CuLa macroporous material is around ten times lower regarding conventional PtBa catalysts, the kinetics of the H2‐NSR cycles are fast enough to allow high NOx removal (until 90 % removal). Lanthanum oxide catalyst prepared with uncontrolled structure has no activity for soot combustion, but the activity increases for a macroporous counterpart prepared using the colloidal crystal template because the macroporous structure improves the soot‐catalyst contact and allows the nitrogen‐oxygen surface groups yielded upon NOx chemisorption to oxidize soot. The soot combustion activity of lanthanum catalysts is also enhanced upon copper loading, because copper improves the NO2‐assisted soot combustion mechanism and favors the chemisorption of NOx, enhancing soot oxidation by nitrogen‐oxygen surface species. Finally, it is demonstrated that the simultaneous removal of NOx by H2‐NSR and soot combustion can be carried out with a CuLa catalyst at 450 °C. The simultaneous removal does not affect the combustion of soot and only has a small effect in NOx removal.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

CuO/cryptomelane catalyst for preferential oxidation of CO in the presence of H2: deactivation and regeneration

  • Davó-Quiñonero, Arantxa
  • Navlani-García, Miriam
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Navlani-García, Miriam|||/items/af94ee92-41b3-4a2c-9122-a49e865d63ff
Cryptomelane and CuO/cryptomelane catalysts have been tested in the preferential oxidation of CO in the presence of H2 (CO-PROX reaction), paying special attention to deactivation and regeneration issues. Cryptomelane was stable during the CO-PROX reactions in ramp experiments until 200 °C and in a long-term isothermal experiment (10 h). Changes neither in the H2 reducibility and porosity nor in the crystalline phases detected by XRD were observed. On the contrary, CuO/cryptomelane was partially deactivated during the consecutive CO-PROX reaction cycles performed until 200 °C, and the catalytic activity was partially restored by reoxidising the catalyst at 200 °C or 400 °C, the latter temperature being more effective. In spite of the CuO/cryptomelane partial deactivation, the CO-PROX activity of this catalyst was higher than that of cryptomelane once a stable behaviour was achieved. The partial deactivation of CuO/cryptomelane was attributed to the segregation of crystalline phases (hausmannite (Mn3O4) and/or hopcalite (CuMn2O4)), with the segregation of potassium to the surface and decrease in the copper cations' reducibility. The potential contribution to deactivation of the changes in the porous texture of CuO/cryptomelane was ruled out.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Improved CO Oxidation Activity of 3DOM Pr-Doped Ceria Catalysts: Something Other Than an Ordered Macroporous Structure

  • Davó-Quiñonero, Arantxa
  • González Mira, Jorge
  • Such-Basañez, Ion
  • Juan Juan, Jerónimo
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
It is demonstrated that the synthesis procedure for preparing three-dimensionally ordered macroporous (3DOM) Pr-doped ceria catalysts using a polymethylmethacrylate (PMMA) template not only affects the porous structure, but also the chemistry of the ceria surface. The PMMA template does not affect the crystalline features (type of phases, crystallite size, and cell parameter) of Pr-doped ceria, Ce and Pr location into the particles, and the bulk reduction of the Ce-Pr mixed oxide catalysts. On the contrary, the utilization of the PMMA template improves both the porosity and surface redox properties. 3DOM Ce-Pr mixed oxide catalysts combine micro, meso, and macropores, the most area being in the macropore range, while a reference unshaped catalyst presents poor porosity in all ranges. However, the catalyzed CO oxidation rates do not correlate with the surface area of the catalysts (neither micro nor meso/macro). The Ce-Pr-3DOM catalyst also presents improved surface reducibility with regards to the counterpart reference material prepared without the template, and improved redox behavior under reaction conditions; that is, it has a higher area and this area is reduced and reoxidized more easily. X-ray photoelectron spectroscopy analysis evidences that this is mainly attributed to praseodymium cations, which accomplish redox cycles more easily than cerium cations.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

PrOx catalysts for the combustion of soot generated in diesel engines: effect of CuO and 3DOM structures

  • Alcalde-Santiago, Virginia
  • Bailón-García, Esther
  • Davó-Quiñonero, Arantxa
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
PrOx and CuO/PrOx catalysts have been prepared with conventional (Ref) and three dimensionally ordered macroporous (3DOM) structures, and the effect of the structure on soot combustion has been studied. It has been demonstrated that the 3DOM structure significantly improves the catalytic combustion of soot with O2. The activity follows the trend PrOx-3DOM > CuO/PrOx-3DOM ∼ CuO/PrOx-Ref ≫ PrOx-Ref, which is explained considering two aspects: the production of active oxygen and its transfer from catalyst to soot. FESEM microscopy, N2 adsorption, Hg porosimetry and He density show that the 3DOM catalysts have ordered macroporosity with pores of 80 nm in diameter, which favors the carbon–catalyst contact. In addition, the 3DOM catalysts present higher surface density of active oxygen (Oads), which follows the trend CuO/PrOx-3DOM > PrOx-3DOM ∼ CuO/PrOx-Ref > PrOx-Ref. Consequently, the PrOx-3DOM catalyst combines a good production of active oxygen and an efficient transfer to soot, making it the most active catalyst to accelerate soot combustion. In contrast, PrOx-Ref is the least active since it is the least efficient in producing and transferring active oxygen. The impregnation of copper with the conventional support (CuO/PrOx-Ref) enhances the production and transfer of active oxygen, improving the activity with respect to PrOx-Ref. However, CuO blocks the porosity of the 3DOM support, hindering the contact with soot. Soot combustion is accelerated in the presence of NOx due to the production of NO2. This NO2, once produced, is mostly readsorbed on the surface of the catalysts producing active oxygen that must be transferred to soot. For this reason, the porosity of the catalysts also plays a relevant role during combustion with NOx/O2 because it affects the transfer of active oxygen produced by NO2 to soot.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Guefoams (guest-containing foams) as novel heterogeneous catalysts: preparation, characterization and proof-of-concept testing for CO2 methanation

  • Maiorano Lauría, Lucila Paola
  • Chaparro-Garnica, Cristian Yesid
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Bueno López, Agustín
  • Molina Jordá, José Miguel
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Chaparro-Garnica, Cristian Yesid|||/items/035730b2-a503-4ac7-a929-df1d62bd9bb8
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
  • Maiorano Lauría, Lucila Paola|||/items/f667840c-2310-43e7-bfb3-3c98cd06e781
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
The preparation and use of Guefoams as heterogeneous catalyst is reported. The Guefoam catalyst consists of an open-pore Al-Si foam that accommodates a freely mobile guest phase (Ni/CeO2/Al2O3 particles) in its cavities, with neither a physical nor a chemical matrix-guest bond. A eutectic Al-12Si alloy was used as a low-melting matrix precursor to prevent thermal sintering of the active phase during liquid metal infiltration. CO2 methanation was chosen as the reaction test. The activity and CH4 selectivity (close to 100%) achieved with the Guefoam catalyst were similar to those obtained with a packed bed of the same active phase particles, but with the advantages of a structured reactor such as robustness and ease of handling. The thermal conductivity of the Guefoam catalyst is significantly improved with regard to the packed bed of active phase particles, which reduces the temperature gradients in the catalytic reactor, as demonstrated by computational fluid dynamic modelling. Since the permeability of the Guefoam catalyst is 2.7 times that of the packed bed, the pressure drop caused by the passage of a fluid through the novel material is reduced, resulting in a significantly higher catalytic performance index than the packed bed.