Skip to main content

MEJORANDO LA PRODUCCION DE ENERGIA SOLAR CON MATERIALES SEMICONDUCTORES BASADOS EN PEROVSKITAS INORGANICAS-CALCULOS CUANTICOS

PID2019-107137RB-C22

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards Stable Free Lead Mixed Halide Perovskite Thin Films on FTO-Coated Glass Substrate

  • Doumbia, Youssouf
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] All-inorganic cesium (Cs) lead perovskites have better thermal and chemical stability than organic-inorganic hybrids. They therefore represent a hope for stability and increased performance of perovskites as absorber layers in photovoltaic solar cells. In the present work, we have deposited different layers on FTO-coated glass substrates using the one-step spin-coating method. The results of the lead substitution are presented and critically discussed. The X-ray diffraction (XRD) results show four peaks for all three samples. The main peaks of the different films are located at the 2? angles of 26.45 & DEG; and 51.50 & DEG; for the Muller indices (220) and (242), respectively. These two main peaks indicate that the prepared thin films all have two preferred crystallographic orientations. Beyond these two main peaks, we have two other smaller peaks at 2? of 33.67 & DEG; and 37.70 & DEG; corresponding to the Muller indices of (210) and (211), respectively. The smoother the surface of the thin films, the more light they reflect, resulting in poor light absorption by the films. It is therefore important to obtain a surface image of the prepared films, as the larger the surface image, the better the film. With this in mind, we carried out a scanning electron microscope (SEM) analysis, which gave us the surface images. Figure 3 shows the SEM images of thin CsPb1-xSnxI1.5Br1.5 layers (x = 0, 0.5, and 1) grown on FTO-coated glass substrate with different [Pb]/[Sn] ratios. As can be seen from the figure, the effect of the [Pb]/[Sn] ratio is visible in the surface images of the different thin films. The smallest grain size is that of the unsubstituted CsPbI1.5Br1.5, while the largest grain size corresponds to the partially Pb-substituted layer (CsPb0.5Sn0.5I1.5Br1.5). The fully Pb-substituted layer (CsSnI1.5Br1.5) has an intermediate grain size. The surface images of the films show that the surfaces are well coated with grain sizes that vary greatly depending on the layer. The best grain size is that of the thin film with partial lead substitution (CsPb0.5Sn0.5I1.5Br1.5). Regarding the UV-visible absorption of the different films, we can say that the films absorb the maximum amount of light in the wavelength range of 350-550 nm. Above 550 nm, the absorption coefficients drop significantly. The absorption coefficients of the tin-free (Sn) layer remain higher than the coefficients of the other layers throughout the UV-visible spectrum. The degradation study revealed that the Sn-free layer retains good light absorption compared to the other layers after 4 weeks of exposure to the ambient environment. The crystal structure of all the layers shows good resistance to the elements during the 4 weeks, as shown by the renewed XRD results after the 4 weeks of exposure., Author Youssouf Doumbia acknowledges his grant from Erasmus+ KA 107. The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033). The Postdoctoral contract Margarita Salas financed with the union European Next Generation EU. This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/ and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacture of High-Efficiency and Stable Lead-Free Solar Cells through Antisolvent Quenching Engineering

  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
  • Marí-Guaita, Julia
  • Palacios, Pablo
[EN] Antisolvent quenching has shown to significantly enhance several perovskite films used in solar cells; however, no studies have been conducted on its impact on MASnI(3). Here, we investigated the role that different antisolvents, i.e., diethyl ether, toluene, and chlorobenzene, have on the growth of MASnI(3) films. The crystallinity, morphology, topography, and optical properties of the obtained thin films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) measurements, and UV-visible spectroscopy. The impact of the different antisolvent treatments was evaluated based on the surface homogeneity as well as the structure of the MASnI(3) thin films. In addition, thermal annealing was optimized to control the crystallization process. The applied antisolvent was modified to better manage the supersaturation process. The obtained results support the use of chlorobenzene and toluene to reduce pinholes and increase the grain size. Toluene was found to further improve the morphology and stability of thin films, as it showed less degradation after four weeks under dark with 60% humidity. Furthermore, we performed a simulation using SCAPS-1D software to observe the effect of these antisolvents on the performance of MASnI(3)-based solar cells. We also produced the device FTO/TiO2/MASnI(3)/Spiro-OMeTAD/Au, obtaining a remarkable photoconversion efficiency (PCE) improvement of 5.11% when using the MASnI(3) device treated with chlorobenzene. A PCE improvement of 9.44% was obtained for the MASnI(3) device treated with toluene, which also showed better stability. Our results support antisolvent quenching as a reproducible method to improve perovskite devices under ambient conditions., The author Amal Bouich postdoctoral researcher acknowledges Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033) for funding support. This work was supported by EU under Project PID2019-107137RB-C21 and by ERDF under the funding "A way of making Europe". This work was supported by the Ministerio de Ciencia e Innvacion through the project BESTMAT (PID2019107137RB-C21) and (PID2019-107137RB-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and Efficiency Enhancement of Heterojunctions Formed by CZTS and S-Based Buffer Layers for Photovoltaic Applications

  • Aka, Aka Hyacinthe
  • Bouazizi, Sarra
  • Salhi, Yassine
  • Aka, Boko
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] The quaternary material consisting of copper, zinc, tin and sulfur has long attracted the attention of the scientific world in the development of thin layers for photovoltaic applications. In this work, we proposed to make the junction between the absorbent layer consisting of copper-zinc-tin-sulfur Cu2ZnSnS4 (CZTS) and different buffer layers such as zinc sulfide ZnS, tin disulfide SnS2, and cadmium sulfide CdS for comparison purposes, in using the simple and low-cost technique of spray pyrolysis at 380 degrees C for all stages. All the films obtained were characterized by X-ray diffraction (XRD), and UV-visible spectroscopy and the morphology and topography of the layers were assessed under the scanning electron microscope (SEM) and EDXA. Characterization results showed the formation of CZTS thin films whose kesterite structure was improved by annealing at 450 degrees C under sulfur atmosphere. The grain size also improved from 6.7 to 7.9 nm after annealing. Subsequently, a simulation study by SCAPS-1D is made to assess the efficiency of the photovoltaic cell thus produced. It exhibited the highest power conversion efficiency (PCE) for the cell using SnS2 as a buffer layer, i.e., 20.25%, compared to 16.14% for the cell using CdS. This confirmed the possibility of favoring SnS2 in the design of CZTS-based solar cells, suggested in the literature, as a replacement for CdS, and this by the simple technique of spray pyrolysis., This work was funded by the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (Generalitat valenciana, Prometeus 2023 CIPROM2022/03).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Delafossite as hole transport layer a new pathway for efficient perovskite-based solar sells: Insight from experimental, DFT and numerical analysis

  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
  • Cerutti Torres, Joeluis
  • Chfii, Hasnae
  • Marí-Guaita, Julia
  • Khattak, Yousaf Hameed
  • Baig, Faisal
  • Palacios, Pablo
[EN] Herein, we propose a successful technique to produce delafossite materials that can be applied as Hole Transport Layer (HTL) in inorganic lead halide Perovskite solar cells (PSCs). The delafossite CuMO2, where M = Al, Ga, Fe, Cr, Ni, Co, Cr types were investigated the M cation effect on the crystal structure, morphology, and optical properties. These properties were investigated using X-ray, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV visible spectroscopy. The XRD results confirmed their hexagonal and rhombohedral-like structure, where the SEM image of CuMO2 shows the good formation of delafossite layers. The optical band gap of CuMO2 varies from 2.2 eV to 2.99 eV, which is well in line with the literature. Similarly, we also perform the density functional theory (DFT) calculations for delafossite layers to find their electronic properties of them. Based on experimental and DFT calculations, we performed the numerical analysis in SCAPS-1D software on standard solar cell structure (Spiro -OMeTAD/MAPbI3/TiO2) and replaced Spiro -OMeTAD with all the deposited delafossite layers. Our numerical analysis found that HTL shows the highest power conversion efficiency (PCE%) of 22.90. The proposed work can give a good direction for manufacturing to improve the performance of Perovskite-based solar cells (PSCs)., This work has been funded by the Ministerio de Ciencia e Innovacion (Spain) and by the Spanish Agencia Estatal de Investigacion through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/5011000 11033 and PID2019-107137RB-C22/AEI/10.13039/501100011033 and by ERDF under the funding "A way of making Europe". The author Amal Bouich acknowledges MCIN for funding support through Marga-rita Salas Fellowship (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving Stability and Performance of Cesium Mixed Lead Halides for Photovoltaic Applications

  • Doumbia, Youssouf
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] We have focused on mixed halide perovskite thin films of the formula CsPbX3 where (X-3 = Br-3, Cl-3, I-3, Br2Cl, Br2I, and I2Cl) prepared by spin-coating in order to study the effects of partial and total Br substitution. For this purpose, we performed a series of characterizations, including x-ray diffraction, scanning electron microscopy (SEM), atomic force microscopy (AFM), and UV-visible spectroscopy. All the films except CsPbI2Br showed two characteristic peaks at 2 theta angles of 26.80 degrees and 51.80 degrees corresponding to the (111) and (220) crystallographic planes. In the case of CsPbI2Br, we have the same peaks, but the main ones are located at 15 degrees and 30 degrees for the (100) and (200) planes, respectively. SEM examined the surface morphology of the different mixed lead halide films; the best surface was that of the CsPbBr2I sample, which is well-coated, dense, with no pinholes and no cracks, and has the largest grain size. In addition, all the mixed halide films showed good absorbance, especially between 600 nm and 900 nm, with band gap values between 1.94 and 2.92 eV., Author Youssouf Doumbia acknowledges his grant from Erasmus+ KA 107. Author Amal Bouich acknowledged the post-doctoral contract supported by the RRHH, the Postdoctoral contract Margarita Salas financed with the union European Next Generation EU. This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cu-Doped TiO&lt, sub&gt, 2&lt, /sub&gt, Thin Films by Spin Coating: Investigation of Structural and Optical Properties

  • Sassi, Syrine
  • Hajjaji, Anouar
  • Khezami, Lotfi
  • Bessais, Brahim
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Cu-doped TiO2 films were synthesized directly on FTO glass with a spin coating method. With a variation in copper amount, samples were prepared with 0%, 1%, 2%, 4% and 8% of dopant concentrations. Morphological and structural characterization of undoped and Cu-doped TiO2 samples were investigated and the obtained results showed the small, spherical shapes of the nanoparticles forming a thin film on top of FTO glass and their preferred orientation of TiO2 anatase (101), which is the same for each sample. However, this peak exhibited a slight shift for the 2% sample, related to the inflation of the microstrain compared to the other samples. For the optical properties, the 4% sample displayed the highest transmittance whereas the 2% sample exhibited the lowest band gap energy of 2.96 eV. Moreover, the PL intensity seems to be at its highest for the 2% sample due to the present peaking defects in the structure, whereas the 8% sample shows a whole new signal that is related to copper oxide. These properties make this material a potential candidate to perform as an electron transport layer (ETL) in solar cells and enhance their power conversion efficiency., Syrine Sassi acknowledged Erasmus plus for the grant, the author Amal Bouich acknowledges MCIN for funding support through MS Fellowship (MCIN/AEI/10.13039/501100011033) and UE NextGeneration. This research was funded by the Ministerio de Ciencia e Innovacion (Spain) and by the Spanish Agencia Estatal de Investigacion through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/5011000 11033 and PID2019-107137RB-C22/AEI/10.13039/501100011033 and by ERDF under the funding "A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Insight of ZnO/CuO and ZnO/Cu2O solar cells efficiency with SCAPS simulator

  • Klegayere Emmanuel, Kone
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Despite the low power conversion efficiency of solar cells n-ZnO/p-CuO and n-ZnO/p-Cu2O, they can contribute to the development of photovoltaic energy. To optimize their yields, the simulator software SCAPS-1D was used in this work to do the simulations of the two cells (Fig. 1) by varying certain parameters. Its parameters were thickness, bandgap, shallow uniform donor density (ND) for the ZnO, and shallow uniform acceptor density (NA) for the CuO and Cu2O. The values optimized of these parameters gave short-circuit currents and efficiencies of 27.7755 mA.cm¿2, 31.40%, and 12.9790 mA.cm¿2, 13.34% respectively for the solar cells n-ZnO/p-CuO and n-ZnO/p-Cu2O (Fig. 2). Our results reveal that the n-ZnO/p-CuO solar cell is more efficient than the n-ZnO/p-Cu2O solar cell and can be used for converting solar energy into electricity., This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. Erasmus+ (Grant No. KA107), Union European next Generation EU, (Grant No. RRHH), The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Advancements in bandgap engineering: bromide-doped cesium lead perovskite thin films

  • Fradi, Khawla
  • Khattak, Yousaf Hameed
  • Baig, Faisal
  • Slimi, Bechir
  • Chtourou, Radhouane
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Perovskite materials have emerged as promising candidates for next-generation photovoltaic devices due to their unique optoelectronic properties. In this study, we investigate the incorporation of bromine into cesium lead mixed iodide and bromide perovskites (CsPbI3(1-x)Br3x) to enhance their performance. By depositing films with varying bromine concentrations (x = 0, 0.25, 0.5, 0.75), we employ a combination of structural and optical characterization techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-visible spectroscopy, and photoluminescence. Our analysis reveals that introducing bromine leads to structural modifications, influencing the perovskite films' optical properties and energy gap. Specifically, we observe semiconductor behavior with a tunable energy gap controlled by the intercalation of bromine atoms into the CsPbI3 lattice. Furthermore, heat treatment induces phase transitions in the perovskite films, affecting their optical responses and crystalline quality. SCAPS-1D simulations confirm the improved stability and efficiency of bromine-doped CsPbI3 films compared to undoped counterparts. Our findings demonstrate that bromine incorporation facilitates the formation of highly crystalline perovskite films with reduced trap defects and enhanced carrier transport properties. These results underscore the potential of bromine-doped CsPbI3 perovskites as promising materials for high-performance photovoltaic applications, paving the way for further optimization and device integration., The author Amal Bouich, a postdoctoral researcher, acknowledges Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033) for funding support. This work was supported by the EU under project PID2019-107137RB-C22 and by ERDF under the funding "A way of making Europe." This work was supported by the Ministerio de Ciencia e Innovacion through the project BESTMAT-QC (PID2019-107137RB-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Structural and Electrochemical Properties of CuCoO2 Crystalline Nanopowders and Thin Films: Conductivity Experimental Analysis and Insights from Density Functional Theory Calculations

  • Chfii, Hasnae
  • Andrio, Andreu
  • Cerutti Torres, Joeluis
  • Palacios, Pablo
  • Abd Lefdil, Mohammed
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] A novel manufacturing process is presented for producing nanopowders and thin films of CuCoO2 (CCO) material. This process utilizes three cost-effective synthesis methods: hydrothermal, sol-gel, and solid-state reactions. The resulting delafossite CuCoO2 samples were deposited onto transparent substrates through spray pyrolysis, forming innovative thin films with a nanocrystal powder structure. Prior to the transformation into thin films, CuCoO2 powder was first produced using a low-cost approach. The precursors for both powders and thin films were deposited onto glass surfaces using a spray pyrolysis process, and their characteristics were examined through X-ray diffraction, scanning electron microscopy, HR-TEM, UV-visible spectrophotometry, and electrochemical impedance spectroscopy (EIS) analyses were conducted to determine the conductivity in the transversal direction of this groundbreaking material for solar cell applications. On the other hand, the sheet resistance of the samples was investigated using the four-probe method to obtain the sheet resistivity and then calculate the in-plane conductivity of the samples. We also investigated the aging characteristics of different precursors with varying durations. The functional properties of CuCoO2 samples were explored by studying chelating agent and precursor solution aging periods using Density Functional Theory calculations (DFT). A complementary Density Functional Theory study was also performed in order to evaluate the electronic structure of this compound. Resuming, this study thoroughly discusses the synthesis of delafossite powders and their conversion into thin films, which hold potential as hole transport layers in transparent optoelectronic devices., The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033). This work has been funded by the Ministerio de Ciencia e Innovación (Spain) and by the Spanish Agencia Estatal de Investigación through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/5011000 11033 and PID2019-107137RBC22/AEI/10.13039/ 501100011033 and by ERDF under the funding ¿A way of making Europe¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Investigation of the Surface Coating, Humidity Degradation, and Recovery of Perovskite Film Phase for Solar-Cell Applications

  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
  • Marí-Guaita, Julia
  • Baig, Faisal
  • Khattak, Yousaf Hameed
  • Palacios, Pablo
[EN] Presently, we inquire about the organic/inorganic cation effect on different properties based on structure, morphology, and steadiness in preparing a one-step solution of APbI(3) thin films, where A = MA, FA, Cs, using spin coating. This study was conducted to understand those properties well by incorporating device modeling using SCAPS-1D software and to upgrade their chemical composition. X-ray diffraction (XRD) was used to analyze the crystal structures. Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) were conducted to characterize the surface morphology; photoluminescence, Transmission Electron Microscopy (TEM), and a UV-Visible spectrometer helped us to study the optical properties. The (110) plane is where we found the perovskite's crystalline structure. According to the XRD results and by changing the type of cation, we influence stabilization and the growth of the APbI(3) absorber layer. Hither, a homogenous, smooth-surfaced, pinhole-free perovskite film and large grain size are results from the cesium cation. For the different cations, the band gap's range, revealed by the optical analysis, is from 1.4 to 1.8 eV. Moreover, the stability of CsPbI3 remains excellent for two weeks and in a similar to 60% humid environment. Based on the UV-Visible spectrometer and photoluminescence characterization, a numerical analysis for fabricated samples was also performed for stability analysis by modeling standard solar-cell structures HTL/ APbI(3) / ETL. Modeling findings are in good agreement with experimental results that CsPbI3 is more stable, showing a loss % in PCE of 14.28%, which is smaller in comparison to FAPbI(3) (44.46%) and MAPbI(3) (20.24%)., The author Amal Bouich postdoctoral researcher acknowledges Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033) for funding support. This work was supported by EU under Project PID2019-107137RB-C21 and by ERDF under the funding ¿A way of making Europe¿. This work was supported by the Ministerio de Ciencia e Innvación through the project BESTMAT (PID2019-107137RB-C21) and (PID2019-107137RB-C22). We would like to thank Ministerio de Economia y Competitividad (Spain) for supporting this work and Margarita Salas Fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Harnessing prion-inspired amyloid self-assembly for sustainable and biocompatible proton conductivity

  • Navarro, Susana
  • Andrio, A.
  • Diaz-Caballero, Marta
  • Ventura, Salvador
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] Protein-based materials have emerged as promising candidates for proton-conducting biomaterials. Therefore, drawing inspiration from the amino acid composition of prion-like domains, we designed short self-assembling peptides incorporating the (X-Tyr) motif, with X representing Asn, Gly and Ser, which form fibrillar structures capable of conducting protons. In this study, we conducted an analysis of the conductivity capacity of these fibers, with a focus on temperature and frequency dependence of conductivity. The loss tangent curves data and the electrode polarization model with the Debye approximation were employed to calculate transport properties, including conductivity, diffusivity, and density of charge carriers. Results revealed the prion-like fibers can transport protons more efficiently than biomaterials and other synthetic proton conducting materials, and that a significant increase in conductivity is observed with fibrillar orientations. The temperature dependence of conductivity of the peptides, measured in wet conditions, showed conductivities following the trend sigma(NY7) < sigma(GY7) < sigma(SY7), in all the range of temperatures studied. The Arrhenius behavior, and the activation energy associated with conductivity followed the trend: E-act (SY7) = 8.2 +/- 0.6 kJ mol(-1) < E-act (GY7) < 13 +/- 5 kJ mol(-1) < E-act (NY7) = 31 +/- 7 kJ mol(-1), in different range of temperatures depending of the peptide. Furthermore, the diffusion coefficient correlated with increasing temperature in GY7 and SY7 fibers for temperatures compress between 20 degrees C and 80 degrees C, while NY7 only below 60 degrees C. However, it is noteworthy that the diffusivity observed in the SY7 peptide is lower, compared to GY7 and NY7 presumably due to its enlarged length. This observation can be attributed to two factors: firstly, the higher conductivity values observed in SY7 compared to GY7 and NY7, and secondly, to the value of relation observed of cations present in the peptide SY7 compared with GY7 and NY7, which in turn is dependent on temperature. In light of these findings, we envision our prion-inspired nanofibers as highly efficient proton-conducting natural biopolymers that are both biocompatible and biodegradable. These properties provide the opportunity for the development of next-generation bioelectrical interfaces and protonic devices., We want to acknowledge to Generalitat Valenciana (PROMETEO 2023. CIPROM/2022/03) by V. C., the Spanish Ministry of Science and Innovation by the project number PID 2019-107137 RB-C2, and PID2019-105017RB-I00 by S. V. and S. N.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Deposition Cycles on the Properties of ZnO Thin Films Deposited by Spin Coating Method for CZTS-based Solar Cells

  • Aamir Shafi, Muhammad
  • Fradi, Khawla
  • Marí-Guaita, Julia
  • Khan, Laiq
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] The spin-coating technique was used to make ZnO thin films in this study. To get various thicknesses of ZnO thin film on FTO substrate, the numbers of spin coatings were changed, 2,4,6,8, and 10 times. The polycrystalline character of the ZnO film can be seen in all of the XRD samples. The more strong peaks exist on (100), (002) and (101) at two theta degrees 34.14, 34.84 and 36.68, respectively. The effect of different deposition cycles was evaluated based on the surface homogeneity. The ZnO deposited by 8 and 10 cycles showed a dense and smooth surface with good crystallinity and roughness with no holes. The estimated band gap for as-deposited ZnO films is 1.73-2.35 eV with increasing deposition cycles. As we annealed the samples at 450 degrees C for 45 min, the variation in the band was observed from 3.24 to 3.29 eV. Hence the annealing also played an essential role in the band gap variation. To check the effect of cycles on solar cell performance, a simulation software SCAPS-1D was used. We proposed a solar cell of model "Back. Contact/CZTS/CdS/ZnO/Front.Contact/Glass" used in the simulation., Author Amal Bouich acknowledged the post-doctoral contract supported by the RRHH, the Postdoctoral contract the Margarita Salas financed with union European Next Generation EU. This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Author Muhammad Aamir Shafi acknowledged the "Higher Education Commission of Pakistan", International Research Support Initiative Program (IRSIP) under grant No: 1-8/HEC/HRD/2020/10744 PIN: IRSIP 45 Engg 17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Opportunities, Challenges, and Future Prospects of the Solar Cell Market

  • Bouich, Amal|||0000-0001-6745-8831
  • Guaita-Pradas, Inmaculada|||0000-0003-4116-2375
  • Aziz Khan, Mehwish
  • Hameed Khattak, Yousaf
[EN] The production and consumption of energy must be converted to renewable alternatives in order to meet climate targets. During the past few decades, solar photovoltaic systems (PVs) have become increasingly popular as an alternative energy source. PVs generate electricity from sunlight, but their production has required governmental support through market interventions due to their lack of competitiveness on the energy market. Despite 40 years of attempts to establish PV technology through such interventions, the aim of this paper is to find out what general conclusions can be drawn regarding different technologies. Our study examines peer-reviewed studies from the start of PV technology up to 2023 to answer these questions. The literature indicates that not only developed countries but also developing and emerging nations possess significant potential to mitigate the adverse effects of climate change by adopting renewable energy sources. Leading market players can offer support to these less developed countries by subsidizing both equipment and installation processes. As a result, this initiative can contribute to sustainable development on our planet., The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033). This work has been funded by the Ministerio de Ciencia e Innovacion (Spain) and by the Spanish Agencia Estatal de Investigacion through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/501100011033 and PID2019-107137RB-C22/AEI/10.13039/501100011033 and by the ERDF under the funding project "A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Investigation of mixed bromide iodide lead perovskites by spin coating onto single and tandem solar cells applications

  • Armel Ignace, N&apos;Guessan
  • Doumbia, Youssouf
  • D. Soro
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] In this study mixed bromide iodide lead perovskites CH3NH3PbI3-xBrx were successfully deposed at Fluorine doped Tin Oxide (FTO) coated glass substrate by Spin coating process. We investigated the processing substitution of PbI3 by PbBr3 in CH3NH3PbI3-xBrx.We also studied the structural and optical properties in Br-gradient MAPbI3-xBrx perovskites thin film deposited using UV-vis absorption and X-ray diffraction of each mixed halide (I/Br) perovskites film and nanostructured for solar cell applications. The surface morphology of mixed halide perovskite films deposited was analyzed by Scanning electron microscopy (SEM). We observed that peaks are shifted toward the higher 2 theta direction as Br content increases, moving from a tetragonal to a cubic structure. The perovskite films deposited show bandgap increasing with Br content. We also used device simulation to study the impact of various compositions of Br on single, and tandem proposed solar cells' performance. In consideration of the Br rate, the suitable device for adequate Br rate in solar cell application has been considered. The tandem J-V shows a short-circuit current density (Jsc) of 38.81 mA/cm2, an open-circuit voltage (Voc) of 1.54 V, fia ll factor (FF) of 73.32 % a,nd Pa CE of 43.84 %., Author N'Guessan Armel Ignace acknowledges his Erasmus+KA 107 grant. The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/ 501100011033) and NextGenerationEU. This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/ 501100011033 and by "ERDF A way of making Europe"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis and characterization of kesterite Cu2ZnSn (SxSe1-x) 4 thin films with low-cost for efficient solar cells

  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] In this study, we conducted an investigation on the Cu2ZnSnS4 (CZTS) k¿esterite compound, which is considered an attractive material for its favorable absorption properties, making it a suitable semiconductor for photovoltaic applications. However, its market potential is limited by its low efficiency of 12.6%, primarily caused by the presence of secondary phases that act as recombination centers. Theoretically, the efficiency limit for CZTS ranges from 31% to 33%. To enhance the photovoltaic performance of CZTS, we employed a doping strategy by incorporating selenium (Se) into the Cu2ZnSn(SxSe1-x)4 film, where the sulfur-to-selenium ratio (S/Se) was optimized within the range of 0< x <1. The CZTS films were deposited onto FTO substrates using the spray pyrolysis technique, which is a simple and cost-effective method. The characterization of these films involved X-ray diffraction (XRD) and UV¿visible spectroscopy analysis. Additionally, the morphology and topography of the CZTSSe layers were examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM), respectively. Trans mission electron microscopy (TEM) was also employed. The results obtained in this study indicate that CZTSSe films exhibit band gap values ranging from 1.54 eV to 1.68 eV and grain compactness, with larger agglomerated grains on the film surface when the S/Se ratio is approximately 0.5 or lower. Moreover, the resistivity measurements revealed significant variations when sulfur and selenium were combined, suggesting the influence of their composition on the electrical properties of the CZTS films., Aka Hyacinthe AKA acknowledged Erasmus107 for the grant, The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033). This work has been funded by the Ministerio de Ciencia e Innovacio¿n (Spain) and by the Spanish Agencia Estatal de Investigacio¿n through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/501100011033 and PID2019-107137RB-C22/AEI/10.13039/501100011033 and by ERDF under the funding A way of making Europe
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Investigation of the optoelectronic and structural properties of FA(1-x)BixPbBr6I3 of Perovskite mixed halide films

  • Touré, Abdoulaye
  • Doumbia, Youssouf
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] In this study, we analyzed the structural and optical characteristics of pure FAPbBr2I mixed halide perovskites and doped with a large proportion of bismuth. Previous work has demonstrated that the replacement of 2/3 of the iodine by bromine in the perovskite FAPbI3 limits its phase transition and thus increases its stability. However, this improvement in stability is accompanied by an increase in the band gap, from 1.45 to about 2 eV. It has been found that bismuth doping of certain perovskite materials makes it possible, in addition to increasing their stability, to significantly reduce their band gap, although certain authors still contest this phenomenon. Thus, we synthesized thin layers of perovskite FAPbBr2I doped with bismuth and studied the effect of this doping on the crystalline structure and the layers' optical characteristics thanks to analyses by X-ray diffraction, scanning electron microscopy and measurements of absorption and photoluminescence. The structural analysis results showed that bismuth diffuses very slowly into the crystal, resulting in a reduction in crystal size and a smoother surface. Moreover, measurements of the absorption coefficient revealed a significant reduction in the band gap, going from 2.08 eV with 0% bismuth to 1.45 eV with 20% bismuth. However, photoluminescence measurements gave much higher bandgap values. We believe that a phenomenon related to the addition of bismuth is responsible for this discrepancy., The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033). This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF" A Way of Making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Surface engineering of zinc oxide thin as an electron transport layer for perovskite solar cells

  • Klegayere Emmanuel, Kone
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] This work investigates the zinc oxide (ZnO) deposited by the spin coating technique which has for the main advantage of its implementation. Zinc oxide is a semiconductor that has a direct optical bandgap of 3.3 eV which has transparency properties of about 80% optical, anti-reflection in the UV-Vis spectrum, and high electrical conductivity (Cao et al. 2018). The electron transport layer (ETL) is one of its main functions in a solar cell. The number of spin coatings was changed from 1 to 4 in order to get different variations of ZnO thicknesses. These different samples were characterized. X-Ray Diffraction (XRD) showed the polycrystalline character of the ZnO films. Two peaks (the strongest) have been identified on planes (002) and (101). SEM showed that the surface of the samples presents a good crystallinity, which agrees with the results of XRD. Moreover, the crystallinity and the density increase with the number of cycles. The transmittance of samples obtained by spectrophotometry was about 80% in the visible and decreases with the number of cycles. Bandgap was calculated from absorbance data and it varies from 3.25 to 3.29 eV. The best sample was the sample with four cycles (ZnO-4). It was used for heterojunction with mixed halide methylammonium lead (MAPbBr2I). The bandgap obtained of the heterojunction MAPbBr2I/ZnO-4 was 1.9 eV. The simulation of the mixed halide methylammonium lead (MAPbBr2I) base-solar cell resulted in 16.938095 mA/cm2 , 2 V, and 33.88% for Jsc, Voc, and eta respectively., This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

From Powder Manufacturing to Perovskite/&lt, i&gt, p&lt, /i&gt, -type TCO Thin Film Deposition

  • Doumbia, Youssouf
  • Touré, Abdoulaye
  • Mari Guaita, Julia
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Photovoltaic perovskites are very attractive candidates as absorber layers because of their very interesting properties. In the present work, we have two parts: first, we prepared powders of the perovskites MAPbBr3, MAPbI3, and MAPbCl3, with the aim of maximizing their purity, and then we deposited thin films using these powders previously prepared by the one-step spin-coating method. The anti-solvent used was under the same ambient deposition conditions. We concluded with a series of characterizations such as X-ray diffraction, scanning electron microscopy, and UV-visible absorption to better appreciate the quality of the films produced. The crystalline structures of the films, their surface morphology, and their optical properties from the characterizations show that we have succeeded in producing film samples suitable for photovoltaics., Author Youssouf Doumbia acknowledges his grant from Erasmus+ KA 107. The author Amal Bouich postdoctoral researcher acknowledges a Margarita Salas Fellowship (MCIN/AEI/https://doi.org/10.13039/501100011033) for funding support. This work was supported by the EU with Project PID2019-107137RB-C22 and by ERDF under the funding "A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Insight into the effect of halogen X in methylammonium lead halide (MAPbX3) spin-coated on zinc oxide film

  • Kone, Klegayere Emmanuel
  • Marí-Guaita, Julia
  • Soro, Donafologo
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] Herein, we investigated the effect of halogen X in methylammonium lead halide (MAPbX3) where X = (Iodide/ Bromide, or Chloride) deposited by spin coating technique on a zinc oxide layer. The ZnO films were first deposited on Fluorine-doped Tin Oxide (FTO) substrates. Then, the perovskite solutions (MAPbI3, MAPbBr3, and MAPbCl3) were deposited on the ZnO layer. The films obtained were characterized by X-ray diffraction (XRD), UV¿Visible spectroscopy, and Scanning Electron Microscopy (SEM). The XRD analysis shows characteristic peaks of the ZnO/MAPbX3 heterojunction corresponding to the (100) and (200). The ZnO/MAPbBr3 peaks are more intense than other sample peaks. This analysis also shows the crystalline character of the films produced. SEM images also show the good crystallinity of the films produced. The images show that the grain sizes of the sample ZnO/MAPbBr3 are the largest compared to others. The UV¿visible characterization showed that the iodine-based sample absorbed better and had a good band gap (Eg = 1.95 eV). The degradation study was carried out after two weeks of the deposition. The results showed that the iodine-based sample degrades faster compared to another halogen. These findings are helpful in producing stable and efficient perovskite-based solar cells., Author Klegayere Emmanuel Kone thanks Erasmus + KA107 for the grant. This work has been funded by the Ministerio de Ciencia e Innovacion (Spain) and by the Spanish Agencia Estatal de Investigacion through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/501100011033 and PID2019-107137RB-C22/AEI/10.13039/501100011033 and by ERDF under the funding "A way of making Europe". The author Amal Bouich acknowledges MCIN for funding support through Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tetrabutylammonium-Doped Methylammonium lead iodide: high quality and stable perovskite thin films

  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
  • Marí-Guaita, Julia
  • Sahraoui, Bouchta
  • Palacios, Pablo
[EN] This work reported the successive incorporation of tetrabutylammonium (TBA) into Methylammonium lead Iodide (MAPbI3) perovskite. The thin films were characterized by X-Ray diffraction (XRD), Scanning electron microscopy (SEM), Transmittance electron microscopy (TEM), Atomic force microscopy (AFM), and UV-Visible spectroscopy. It was shown that introducing TBA increases the crystallinity, grain size, surface morphology without pin-hole, and roughness of the MAPbI3 thin films. Moreover, the MA(1-X)TBAX PbI3 thin film shows better stability in a relative humidity of ~60% after 15 days than the pure MAPbI3 thin film. The obtained results are hoped to be helpful for stability and improvement of the performance of the MAPbI3 thin films by doping TBA cations under ambient conditions., This work was supported by the Ministerio de Economia y Competitividad (ENE 2016-77798-C4-2-R). Author AB acknowledged the Post-doctoral contract supported by the RRHH, the Postdoctoral contract the Margarita Salas financed with union European Next Generation EU. Grant PID2019-107137RB-C21 and PID2019-107137RB-C22OAQ funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.