Skip to main content

CONCENTRADORES SOLARES INTELIGENTES INTEGRADOS ARQUITECTONICAMENTE PARA EDIFICIOS DE CONSUMO CERO

PID2019-111536RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE LLEIDA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publication Artículo científico (JournalArticle)

The Environmental Profile of a Building-Integrated Concentrating Photovoltaic System with Hexagonal Concentrators and Micro-Tracking: Embodied Energy and Other Indicators

  • Lamnatou, Chrysovalantou
  • Maestro, Santiago
  • Chemisana Villegas, Daniel
This paper aims to evaluate the eco-profile of a building-integrated concentrating photovoltaic system (photovoltaic-cell electrical efficiency: 21.6%; geometrical concentration ratio: 12.5×), extending previous work on the design and energetic/optical performance of this system (University of Lleida, Spain). There is a lack of studies on the eco-profile of these technologies; for this reason, this study is based on environmental life cycle assessment (case study: a building in Barcelona; tools: SimaPro/ecoinvent, inventory-of-carbon-and-energy). Focusing on global warming potential and cumulative energy demand, the impacts range from 341 to 507 kg CO2.eq/m2 and from 5660 to 7505 MJprim/m2. Energy and greenhouse-gas payback times vary between 2.5 and 6.7 years and are shorter than the useful life of this energy-generating element (pessimistic scenario: 15 years). Avoided-impact calculations have also been performed, verifying the benefits of this system during the use phase. Overall, the results are comparable to those of traditional photovoltaic systems. The additional advantage of the proposed modules is that they serve as an atrium and offer illumination, successfully combining the benefits of concentrating photovoltaics (high efficiency; reduction in the amount of solar-cell material required), two optical media (achromatic doublets), hexagonal solar concentrators (high packing efficiency) and micro-tracking (overcoming limitations of bulky external trackers)., The authors would like to thank the Ministerio de Ciencia e Innovación of Spain MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843B-I00). The research of S. Maestro was supported by the Secretaría General de Universidades del Ministerio de Universidades of Spain (grant FPU20/01189) and the Col·legi d’Enginyers Industrials de Catalunya (Beca Tesi Doctoral 2022 award). D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Chr. Lamnatou is a Serra Húnter fellow. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Fabrication and experimental validation of a building-integrated microtracking CPV system

  • Maestro, Santiago
  • Chemisana Villegas, Daniel
  • Baig, Hasan
Integrating microtracking concentrator photovoltaic (μT CPV) systems into buildings offers a pathway to energy-efficient and sustainable construction. To maximise solar energy generation in these applications while maintaining internal illumination, advanced optical designs are needed. This study focuses on the fabrication and experimental evaluation of a μT CPV's optical system, specifically designed for building-integrated applications, utilizing advanced optical concentrators (geometrical concentration of 12.5x) to focus sunlight onto high-efficiency silicon solar cells. We detail the optics design and fabrication process, including material selection, manufacturing, and integration strategies. Key performance metrics were evaluated through experimental testing under controlled and real-world conditions. Our findings demonstrate a maximum optical efficiency of 63.5 % and an average solar concentration of 7.9 suns in real-world scenarios. In conclusion, these results highlight the potential of building-integrated μT CPV systems to contribute to net-zero energy goals, enhance urban energy resilience, and promote the adoption of innovative solar technologies in the built environment., The authors would like to thanks “Ministerio de Ciencia e Innovación ” of Spain, MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843BI00). Research of S. Maestro was supported by “Secretaría General de Universidades del Ministerio de Universidades” of Spain (grant FPU20/ 01189) and “Col⋅legi Enginyers Industrials de Catalunya” for the “Beca Tesi Doctoral 2022” award. D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Photovoltaic/thermal systems based on concentrating and non-concentrating technologies: Working fluids at low, medium and high temperatures

  • Lamnatou, Chrysovalantou
  • Vaillon, Rodolphe
  • Parola, Stéphanie
  • Chemisana Villegas, Daniel
The present article provides an overview about photovoltaic/thermal systems categorised by the temperature of the working fluid: Low-temperature (lower than 60º C), medium-temperature (between 60 and 90º C) and hightemperature (higher than 90º C). Concerning photovoltaic/thermal-air systems for low-temperature use, the majority of studies involve building-integrated non-concentrating systems with phase change materials and working-fluid temperatures at around 30-55º C. Concerning low-temperature photovoltaic/thermal-water systems, a large number of studies are about non-concentrating configurations appropriate for building-integrated and, in general, domestic applications with working fluids at approximately 50–60º C. Regarding nonconcentrating photovoltaic/thermal systems for medium-temperature use, a large number of references are appropriate for industrial and domestic applications (working fluids: air; water) with around 60-70º C workingfluid temperatures. The literature review about medium-temperature concentrating photovoltaic/thermal systems shows that the majority of investigations concern photovoltaic/thermal-water systems with concentration ratios up to 190X and working fluids at approximately 62-90º C, appropriate for domestic and waterdesalination applications. As for high-temperature concentrating photovoltaic/thermal systems, most of them have concentration ratios up to 1000X, involve parabolic concentrators and use water (as the working fluid) at around 100-250º C. Moreover, in the field of high-temperature photovoltaic/thermal systems, most of the configurations are appropriate for building and industrial applications, and consist of triple-junction or siliconbased photovoltaic/thermal cells. In light of the issues mentioned above, a critical discussion and key challenges (in terms of materials, efficiencies, technologies, etc.) are presented., The authors would like to thank ’’Ministerio de Economía y Competitividad’’ and “Ministerio de Ciencia e Innovación” of Spain for the funding (grant references ENE2016-81040-R and PID2019-111536RBI00). D. Chemisana thanks ’’Institució Catalana de Recerca i Estudis Avançats (ICREA)’’ for the ICREA Acadèmia award. Chr. Lamnatou is Lecturer of the Serra Húnter programme. Figures 1–6: reproduced with permission.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Solar Cells Operating under Thermal Stress

  • Vaillon, Rodolphe
  • Parola, Stéphanie
  • Lamnatou, Chrysovalantou
  • Chemisana Villegas, Daniel
Operating a solar cell under thermal stress at temperatures >100°C and up to 500°C seems counterintuitive because conversion efficiency drops dramatically. Even so, there are cases in which solar cells are in high-illumination high-temperature conditions, for near-the-sun space missions and in various terrestrial hybrid systems involving solar-to-thermal energy conversion. This review analyzes the progress of solar cells tested in the laboratory under thermal stress. The fundamental physics governing the thermal sensitivity of solar cells and the main criteria determining the ability of semiconductor materials to survive high temperatures are recalled. Materials and architectures of a selection of the solar cells tested so far are examined. Deviation from the Shockley-Queisser limit at each temperature is used for a fair assessment of the performances. Our analysis reveals the strengths and weaknesses of the existing technologies and the gaps to be filled to develop new classes of solar cells capable of withstanding high temperatures., This work was developed in the frame of the French program Investments for the Future managed by the National Agency for Research under contract ANR-10-LABX-22-01-SOLSTICE. C.L. is lecturer of the Serra Húnter programme. D.C. thanks the Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia, and the Ministerio de Ciencia e Innovación (project PID2019-111536RB-I00).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Design and performance evaluation of a Micro-CPV system for building integration applications

  • Maestro Balaguer, Santiago
  • Chemisana Villegas, Daniel
  • Moreno Bellostes, Àlex
The present research aims at developing a micro-CPV system with static optical elements designed to be placed at the exterior side of buildings to maximize building integration features. The optical system is formed by two optical media with differentiated Abbe number that are designed to minimize field curvature and chromatic aberrations to allow solar tracking by micro-movements of the PV receiver on a plane. An improved simultaneous multiple surface method has been applied to ensure that Fermat principle is met in all the interfaces of the optical system. The optical design angle of incidence range has been set from −40° to 40°. The maximum optical efficiency achieved has been ∼ 80 %. For and extended angular range of ± 70°, the system still operates but with an optical efficiency of ∼ 45 %. The system is intended to be integrated as a semitransparent glazing element allowing the diffuse irradiance to enter the building interior spaces for illumination purposes and the direct irradiance fraction to be concentrated onto the photovoltaic cells. Annual electricity production of 229 kWh/year has been obtained for 1 m2 aperture area system, placed as a part of a typical residential building in Barcelona (Spain)., The authors would like to thanks “Ministerio de Ciencia e Innovacion´ ” of Spain, MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843BI00). Research of S. Maestro was supported by “Secretaría General de Universidades del Ministerio de Universidades” of Spain (grant FPU20/ 01189) and “Col⋅legi Enginyers Industrials de Catalunya” for the “Beca Tesi Doctoral 2022” award. D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Hybrid high-concentration photovoltaic-thermal solar systems for building applications

  • Moreno, A.
  • Chemisana Villegas, Daniel
  • Fernández, Eduardo F.
In situ photovoltaic-thermal (PVT) solar energy generation in buildings is an effective way to cover both thermal and electrical energy demands, mimizing losses and costs associated with transportation. High-concentration PVT (HCPVT) collectors present higher electrical conversion efficiencies, lower thermal dependence coefficients and the possibility of achieving higher temperature heat than conventional PVT systems. These features address the need of maximizing the energy generation in cities where there is very limited available space for renewable energy installations. In the present study, a HCPVT module has been designed, modelled and simulated. Simulations have been conducted for two representative cities with different climates but both suitable for solar concentration applications: Almería (Spain) and Lancaster (United States). The results demonstrate a very good performance in both locations, covering from 95% to 100% of the domestic hot water demand, and more than 55% of the space heating and cooling and electricity demands. Additionally, a comparison with a standard PVT solar collector has been carried out, indicating that the HCPVT system clearly outperforms the standard one in terms of the electricity and the thermal energy produced., The authors would like to thank ’’Ministerio de Economía y Competitividad’’ of Spain , “Ministerio de Ciencia e Innovación” for the funding (grant references ENE2016-81040-R & PID2019-111536RBI00) and “AGAUR” (2017 SGR 127). D. Chemisana thanks ’’Institucio ´ Catalana de Recerca i Estudis Avançats (ICREA)’’ for the ICREA Acad`emia award. E.F. Fern´ andez thanks the Spanish Ministry of Science, Innovation and Universities for the funds received under the Ramon ´ y Cajal program (RYC-2017-21910).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

On mixed radial Moore graphs of diameter 3

  • Ceresuela, Jesús M.
  • López Lorenzo, Ignacio
  • Chemisana Villegas, Daniel
Radial Moore graphs and digraphs are extremal graphs related to the Moore ones where the distance-preserving spanning tree is preserved for some vertices. This leads to classify them according to their proximity to being a Moore graph or digraph. In this paper we deal with mixed radial Moore graphs, where the mixed setting allows edges and arcs as different elements. An exhaustive computer search shows the top ranked graphs for an specific set of parameters. Moreover, we study the problem of their existence by providing two infinite families for different values of the degrees and diameter 3. One of these families turns out to be optimal., The authors would like to thank “Ministerio de Ciencia e Innovaci´on” of Spain, MCIN/AEI/10.13039/501100011033 (grant references PID2019-111536RBI00 and PID2020-115442RB-I00) and AGAUR (grants references 2017SGR1158 and 2017SGR1276). Research of J. M. Ceresuela was supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (grant 2020 FISDU 00596). D. Chemisana thanks “Instituci´o Catalana de Recerca i Estudis Avan¸cats (ICREA)” for the ICREA Acad`emia award.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Energy performance and crop yield production of a semitransparent photovoltaic greenhouse

  • Moreno Bellostes, Àlex
  • Chemisana Villegas, Daniel
  • Fernández, Eduardo F.
Agrivoltaics have emerged as a viable solution to resolve conflicts arising from land-use competition between large photovoltaic solar installations and conventional agriculture. However, their implementation has not yet fully addressed the issue of social community rejection due to visual impact or making agricultural tasks more difficult. For this reason, integrating photovoltaics into existing agricultural infrastructure could offer a promising solution to mitigate this issue. The present research focuses on the analysis and modelling about the integration of two types of semitransparent organic photovoltaic (OPV) modules in multi-tunnel greenhouses. Two different representative locations of high density of greenhouses are selected: Almeria (Spain) and Agadir (Morocco). A holistic model based on Python/Trnsys/Radiance/TOMGRO is proposed to evaluate the energy, light, and tomato crop behaviour under various OPV coverage percentages and their positions on the greenhouse roof. The results demonstrate that higher OPV coverage percentages lead to a reduction in overall energy consumption in both locations. However, when looking at the illumination levels and weight of the tomato crop the tendency is opposite, resulting in insufficient illumination levels for some periods. This scenario presents a significant challenge in determining the optimal solution, owing to the difficulty in striking a balance between two essential goods: energy and food. In response to this, a strategy that slightly favours food production is adopted, aiming to minimise the impact on crop growth. From this perspective, the optimal solution for both locations is the use of OPV modules with 66 % coverage. This configuration is projected to satisfy about 50 % of the heating energy needs, but it may lead to a reduction in tomato yields by around 12 % with respect to a standard greenhouse., The authors would like to thank the Spanish MCIN/AEI/10.13039/ 501100011033 for the funding (grant reference: PID2019-111536RBI00; TED2021-132843B-I00; PLEC2022-009435). Alex Moreno Bellostes is a Serra Húnter Fellow. D. Chemisana thanks Institucio ´ Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acad`emia award. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Household photovoltaic systems optimization methodology based on graph theory reliability

  • Ceresuela, Jesús M.
  • Chemisana Villegas, Daniel
  • López Lorenzo, Ignacio
A novel passive strategy to overcome the inconveniences of possible failure or underperformance of the components of a household scale photovoltaic (PV) system is proposed. The developed methodology is based on network reliability and determines the optimal array topology to be implemented under certain constraints through the maximization of a merit function that considers three different aspects: the total power that a structure produces, the power per panel ratio and the average reliability of the structure. Every factor is weighted through a parameter that controls its relative importance in the merit function. The restriction implemented in this study corresponds to the inherent limits in the voltage and current input of an inverter. The optimization process has been developed for several scenarios considering different decision criteria. Intuitive results are obtained when the optimization relies on the power per unit module and also when reliability is the main contributor in the merit function. When power production is preferred, structures with large number of panels prove to be the best even when they are asymmetrically connected and thus some panels are underperforming. A case study of a particular inverter has been developed to gain insight in an example, computing the optimal structure in terms of the three parameters., The authors would like to thank ‘‘Ministerio de Ciencia e Innovación’’ of Spain, MCIN/AEI/10.13039/501100011033 (grant references PID2019-111536RB-I00 and PID2020-115442RB-I00). Research of J. M. Ceresuela was supported by Secretaria d’Universi tats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya(grant 2020 FISDU 00596). D. Chemisana thanks ‘‘Institució Catalana de Recerca i Estudis Avançats (ICREA)’’ for the ICREA Acadèmia award.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Photovoltaics for buildings and greenhouses: Organic solar cells and other technologies

  • Lamnatou, Chrysovalantou
  • Chemisana Villegas, Daniel
In light of the increasing environmental awareness, the present study is about life-cycle assessment of the Balance of System (BOS) of Photovoltaics (PVs), underlining the advantages of Organic Photovoltaics (OPVs). A closer look at the literature on PV shows that there is a dearth of studies which place emphasis on PVs with lightweight BOS systems, highlighting the importance of flexible/lightweight PV modules for buildings and greenhouses. To fill this literature gap, the present article sets out to: i) offer an overview of BOS, ii) analyse the environmental profile of the BOS of a grid-connected PV rooftop system, iii) estimate the avoided impacts of PV systems which need small amounts of BOS materials and iv) present critical factors for OPV greenhouses and PV challenges. Considering the results of the present study as well as results of other studies, BOS impacts range from: i) 6 to 181 kg CO2.eq/m2 of PV module, ii) 55 to 1900 MJprim/m2 of PV module. On the other hand, taking into account that the avoided impacts of a PV system are inextricably linked to the electricity mix of a certain country, a case study based on different electricity mixes (OPV system: Spain; Italy; Portugal) is presented., The authors would like to thank the Spanish MCIN/AEI/10.13039/ 501100011033 for the funding (grant reference: PID2019-111536RBI00; TED2021-132843B-I00). D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acad`emia award. Chr. Lamnatou is an Associate Professor of the Serra Húnter programme.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Graph Theory-Based Characterization and Classification of Household Photovoltaics

  • Ceresuela, Jesús M.
  • Chemisana Villegas, Daniel
  • López Lorenzo, Ignacio
With the clear goal of improving photovoltaic (PV) technology performance towards nearly-zero energy buildings, a graph theory-based model that characterizes photovoltaic panel structures is developed. An algorithm to obtain all possible configurations of a given number of PV panels is presented and the results are exposed for structures using 3 to 7 panels. Two different classifications of all obtained structures are carried out: the first one regarding the maximum power they can produce and the second according to their capability to produce energy under a given probability that the solar panels will fail. Finally, both classifications are considered simultaneously through the expected value of power production. This creates structures that are, at the same time, reliable and efficient in terms of production. The parallel associations turn out to be optimal, but some other less expected configurations prove to be rated high., The authors would like to thank “Ministerio de Economía y Competitividad” and “Ministerio de Ciencia e Innovación” of Spain for the funding (grant reference ENE2016-81040-R and PID2019-111536RB-I00). Research of J. M. Ceresuela was supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (grant 2020 FISDU 00596). D. Chemisana thanks ”Institució Catalana de Recerca i Estudis Avançats (ICREA)” for the ICREA Acadèmia award. Research of N.López was supported in part by grant MTM2017-86767-R and PID2020-115442RB-I00 (Spanish Ministerio de Ciencia e Innovacion).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Life-cycle assessment of solar façades – The role of ethylene tetrafluoroethylene in building-integrated applications

  • Lamnatou, Chrysovalantou
  • Moreno Bellostes, Àlex
  • Chemisana Villegas, Daniel
  • Riverola Lacasta, Alberto
  • Solans Barón, Alejandro
The present article sets out to investigate two façade-integrated systems with organic photovoltaics and ethylene tetrafluoroethylene, based upon life-cycle assessment. The proposed systems have been designed and experimentally evaluated at the University of Lleida, in Spain. The analysis involves two electricity mixes (Spanish; French), two cities (Barcelona; Paris), optimistic and pessimistic scenarios. In most cases, the energy-payback-time values are around 1–2 years, i.e. lower in comparison to system lifespan (10 years). Energy-return-on-investment values range from around 3 to 21. With regard to avoided greenhouse-gas emissions (lifetime), the results show around 1 t CO2.eq/kWp in Paris and about 5 t CO2.eq/kWp in Barcelona. Considering the Spanish electricity mix, the proposed solar systems offer: 1) avoided greenhouse-gas emissions which range from 76 to 157 kg CO2.eq/year, 2) avoided energy-demand impacts which, in most cases, are higher than 1500 MJprim/year, 3) avoided ReCiPe impacts which vary between 1.4 and 6.2 Pts/year (depending on the impact category). Results based on USEtox and Ecological footprint are also presented. Regarding limitations, the present study has been based on certain assumptions, embodied energy/embodied carbon, etc. Concerning future prospects, the proposed life-cycle model would be extended in order to include additional environmental indicators and methods., The authors would like to thank the Spanish MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843B-I00). D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Chr. Lamnatou is an Associate Professor of the Serra Húnter programme. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618). The authors would also like to acknowledge the collaboration with the company IASO SA.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Energy and photosynthetic performance investigation of a semitransparent photovoltaic rooftop greenhouse for building integration

  • Moreno Bellostes, Àlex
  • Chemisana Villegas, Daniel
  • Lamnatou, Chrysovalantou
  • Maestro Balaguer, Santiago
The present article aims at evaluating semitransparent photovoltaic rooftop greenhouses based on organic photovoltaics and ethylene-tetrafluoroethylene. A RADIANCE/TRNSYS model is proposed. Five configurations (greenhouse roof with 0%, 25%, 50%, 75% and 100% photovoltaic-module covering) and two cities (Barcelona; Paris) have been evaluated. The findings reveal that an increase of the photovoltaic-covering surface reduces the overall energy demand of the greenhouse, but it also reduces the illumination that reaches the crops. For Barcelona, the optimal configuration for proper crop development (tomato; lettuce) is the one with 50% covering. For Paris, the optimal configuration is the one with 25% covering. In terms of energy, in the case of Barcelona, the part of the electricity demand of the greenhouse covered by the photovoltaics ranges from 14% to 63% whereas, in the case of Paris, these percentages range from 6% to 25.3%. As for the thermal behaviour of the building (adjacent office floor), the installation of the rooftop greenhouse reduces air-conditioning demand (around 30% for Barcelona and 37.7% for Paris (0% covering)). For Paris, the effect of the photovoltaic-covering percentage on the thermal demand of the adjacent floor is minimal. However, for Barcelona, it can reduce the airconditioning demand by 35% (scenario: 100% covering)., The authors would like to thank the Spanish MCIN/AEI/10.13039/ 501100011033 for the funding (grant reference: PID2019-111536RBI00; TED2021-132843B–I00). D. Chemisana thanks Institucio ´ Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acad`emia award. Chr. Lamnatou is an Associate Professor of the Serra Húnter programme. Furthermore, this research was supported by the Generalitat de Catalunya (2017 SGR1276). The authors would also like to acknowledge the collaboration with the company IASO SA. A short version of this study was presented during the 17th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES) held in Paphos, Cyprus, 6–10 November 2022. The title of the conference paper is as follows: Energy and Photosynthetic Performance Investigation of a Semitransparent Photovoltaic Rooftop Greenhouse for Building Integration.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Optics for smart building-integrated photovoltaic systems

  • Maestro Balaguer, Santiago
  • Chemisana Villegas, Daniel
  • Lamnatou, Chrysovalantou
The tendency to integrate photovoltaic or photovoltaic/thermal modules into building envelope is changing due to the utilisation of optical elements for sunlight management. However, the viability of these systems mainly depends on two factors: 1) to offer cost-efficient solutions comparing to traditional building-integrated photovoltaic or photovoltaic/thermal systems, 2) to create designs, without being extremely difficult to manufacture and operate them on a large scale. In light of the issues mentioned above, this article presents a comparative analysis of the most relevant and recent smart building-integrated designs, including different optics. The designs have been categorised by the type of technology used to manage sunlight, placing emphasis on building-integrated applications. The results show that, in the case of reflective systems, the most usual designs are based on compound-parabolic-concentrators (usually: static; low concentration ratios). On the other hand, there are numerous configurations using total internal reflection to guide rays to photovoltaic cells. There are also hybrid systems (reflective/refractive) and different types of holograms, luminescent systems, etc., offering smart glazing elements and building-integrated solar panels. Key factors such as effective cooling devices and system functionality are discussed. Gaps in the literature on optical elements for building-integrated photovoltaics are identified. Future research directions are proposed., The authors would like to thank Ministerio de Ciencia e Innovación of Spain MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843B-I00). The research of S. Maestro was supported by the Secretaría General de Universidades del Ministerio de Universidades of Spain (grant FPU20/01189) and the Col⋅legi d’Enginyers Industrials de Catalunya (Beca Tesi Doctoral 2022 award). D. Chemisana thanks Institució o Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Chr. Lamnatou is an Associate Professor of the Serra Húnter programme. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Design and characterization of an OPV-ETFE multi-layer semi-transparent glazing

  • Riverola Lacasta, Alberto
  • Chemisana Villegas, Daniel
  • Moreno Bellostes, Àlex
  • Vaillon, Rodolphe
  • Solans Barón, Alejandro
Architectural glazing has several advantages in terms of aesthetics and user well-being perspectives. However, they can have large impacts on heating and cooling demands and artificial lighting requirements. Ethylene tetrafluoroethylene (ETFE) cushion systems present adequate insulating and transparency characteristics, and, combined with organic photovoltaic (OPV) modules, become a glazing element leading towards energy efficient buildings. The present manuscript reports on a detailed optical, thermal and electrical analysis of a 3-layer ETFE/ OPV cushion that helps the design of these glazing-type systems by providing a better understanding of their performance. Spectrophotometric optical measurements up to 50 µm allow proper estimations of an individual layer radiative behavior. As a matter of fact, these measurements feed the radiative and thermal models that aim at determining the behavior of the organic photovoltaic module as a function of its position in the cushion. Based on the organic photovoltaic module spectral response, electrical power production is estimated. Results reveal that the best configuration is the one placing the organic photovoltaic module in the outer layer, since it represents the case where the OPV module performs better due to the higher incident irradiance and the low dependency on temperature of the generated power., This research was supported by the ‘‘Generalitat de Catalunya’’, Spain (2017 SGR 1276 and ICREA Academia) and ‘‘Ministerio de Ciencia e Innovación’’ of Spain (grant reference PID2019- 111536RB-I00/AEI/10.13039/501100011033). The authors would like to acknowledge the collaboration with the company IASO SA.
Repositori Obert UdL
Publication Artículo científico (JournalArticle)

Study of Full-Color Multiplexed Transmission Holograms of Diffusing Objects Recorded in Photopolymer Bayfol HX

  • Sevilla, Marina
  • Chemisana Villegas, Daniel
  • Atencia Carrizo, Jesús
  • Marín Sáez, Julia
A wavelength multiplexing procedure for color transmission volume holograms of diffusing objects recorded in Bayfol® HX200 photopolymer is proposed. For the recording, three lasers of 442 nm, 532 nm and 633 nm, and a Spectralon® diffusing object were used for monochromatic and polychromatic calibration. Monochromatic calibration shows that the maximum index modulation obtained for each wavelength was not enough to give 100% efficiency, although the efficiency values achieved in the case of monochromatic recordings with diffusing objects were high, at around 90% for 633 nm and 532 nm recordings, and 60% for 442 nm. The efficiency values obtained for multiplexed holograms were 19.1% for the 442 nm hologram, 25.9% for the 532 nm hologram and 15.2% for the 633 nm., This research was funded by the “Diputación General de Aragón-Fondo Social Europeo” (TOL research group, E44_17R), the “Generalitat de Catalunya” (2017FI_B2_00127 and 2017 SGR 1276) and the “Ministerio de Ciencia e Innovación” (PID2019-108598GB-I00, PID2019-111536RB-I00 and PID2021-114311RA-I00)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Study of full-color multiplexed transmission holograms of diffusing objects recorded in photopolymer bayfol hx

  • Sevilla, M.
  • Marín-Sáez, J.
  • Chemisana, D.
  • Collados, M.V.
  • Atencia, J.
A wavelength multiplexing procedure for color transmission volume holograms of diffusing objects recorded in Bayfol® HX200 photopolymer is proposed. For the recording, three lasers of 442 nm, 532 nm and 633 nm, and a Spectralon® diffusing object were used for monochromatic and polychromatic calibration. Monochromatic calibration shows that the maximum index modulation obtained for each wavelength was not enough to give 100% efficiency, although the efficiency values achieved in the case of monochromatic recordings with diffusing objects were high, at around 90% for 633 nm and 532 nm recordings, and 60% for 442 nm. The efficiency values obtained for multiplexed holograms were 19.1% for the 442 nm hologram, 25.9% for the 532 nm hologram and 15.2% for the 633 nm.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Graph Theory-Based Characterization and Classification of Household Photovoltaics

  • Ceresuela, Jesús M.
  • Chemisana Villegas, Daniel
  • López Lorenzo, Ignacio
With the clear goal of improving photovoltaic (PV) technology performance towards nearly-zero energy buildings, a graph theory-based model that characterizes photovoltaic panel structures is developed. An algorithm to obtain all possible configurations of a given number of PV panels is presented and the results are exposed for structures using 3 to 7 panels. Two different classifications of all obtained structures are carried out: the first one regarding the maximum power they can produce and the second according to their capability to produce energy under a given probability that the solar panels will fail. Finally, both classifications are considered simultaneously through the expected value of power production. This creates structures that are, at the same time, reliable and efficient in terms of production. The parallel associations turn out to be optimal, but some other less expected configurations prove to be rated high., The authors would like to thank “Ministerio de Economía y Competitividad” and “Ministerio de Ciencia e Innovación” of Spain for the funding (grant reference ENE2016-81040-R and PID2019-111536RB-I00). Research of J. M. Ceresuela was supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (grant 2020 FISDU 00596). D. Chemisana thanks ”Institució Catalana de Recerca i Estudis Avançats (ICREA)” for the ICREA Acadèmia award. Research of N.López was supported in part by grant MTM2017-86767-R and PID2020-115442RB-I00 (Spanish Ministerio de Ciencia e Innovacion).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Photovoltaic/thermal systems based on concentrating and non-concentrating technologies: Working fluids at low, medium and high temperatures

  • Lamnatou, Chrysovalantou
  • Vaillon, Rodolphe
  • Parola, Stéphanie
  • Chemisana Villegas, Daniel
The present article provides an overview about photovoltaic/thermal systems categorised by the temperature of the working fluid: Low-temperature (lower than 60º C), medium-temperature (between 60 and 90º C) and hightemperature (higher than 90º C). Concerning photovoltaic/thermal-air systems for low-temperature use, the majority of studies involve building-integrated non-concentrating systems with phase change materials and working-fluid temperatures at around 30-55º C. Concerning low-temperature photovoltaic/thermal-water systems, a large number of studies are about non-concentrating configurations appropriate for building-integrated and, in general, domestic applications with working fluids at approximately 50–60º C. Regarding nonconcentrating photovoltaic/thermal systems for medium-temperature use, a large number of references are appropriate for industrial and domestic applications (working fluids: air; water) with around 60-70º C workingfluid temperatures. The literature review about medium-temperature concentrating photovoltaic/thermal systems shows that the majority of investigations concern photovoltaic/thermal-water systems with concentration ratios up to 190X and working fluids at approximately 62-90º C, appropriate for domestic and waterdesalination applications. As for high-temperature concentrating photovoltaic/thermal systems, most of them have concentration ratios up to 1000X, involve parabolic concentrators and use water (as the working fluid) at around 100-250º C. Moreover, in the field of high-temperature photovoltaic/thermal systems, most of the configurations are appropriate for building and industrial applications, and consist of triple-junction or siliconbased photovoltaic/thermal cells. In light of the issues mentioned above, a critical discussion and key challenges (in terms of materials, efficiencies, technologies, etc.) are presented., The authors would like to thank ’’Ministerio de Economía y Competitividad’’ and “Ministerio de Ciencia e Innovación” of Spain for the funding (grant references ENE2016-81040-R and PID2019-111536RBI00). D. Chemisana thanks ’’Institució Catalana de Recerca i Estudis Avançats (ICREA)’’ for the ICREA Acadèmia award. Chr. Lamnatou is Lecturer of the Serra Húnter programme. Figures 1–6: reproduced with permission.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Design and characterization of an OPV-ETFE multi-layer semi-transparent glazing

  • Riverola Lacasta, Alberto
  • Chemisana Villegas, Daniel
  • Moreno Bellostes, Àlex
  • Vaillon, Rodolphe
  • Solans Barón, Alejandro
Architectural glazing has several advantages in terms of aesthetics and user well-being perspectives. However, they can have large impacts on heating and cooling demands and artificial lighting requirements. Ethylene tetrafluoroethylene (ETFE) cushion systems present adequate insulating and transparency characteristics, and, combined with organic photovoltaic (OPV) modules, become a glazing element leading towards energy efficient buildings. The present manuscript reports on a detailed optical, thermal and electrical analysis of a 3-layer ETFE/ OPV cushion that helps the design of these glazing-type systems by providing a better understanding of their performance. Spectrophotometric optical measurements up to 50 µm allow proper estimations of an individual layer radiative behavior. As a matter of fact, these measurements feed the radiative and thermal models that aim at determining the behavior of the organic photovoltaic module as a function of its position in the cushion. Based on the organic photovoltaic module spectral response, electrical power production is estimated. Results reveal that the best configuration is the one placing the organic photovoltaic module in the outer layer, since it represents the case where the OPV module performs better due to the higher incident irradiance and the low dependency on temperature of the generated power., This research was supported by the ‘‘Generalitat de Catalunya’’, Spain (2017 SGR 1276 and ICREA Academia) and ‘‘Ministerio de Ciencia e Innovación’’ of Spain (grant reference PID2019- 111536RB-I00/AEI/10.13039/501100011033). The authors would like to acknowledge the collaboration with the company IASO SA.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Photovoltaics for buildings and greenhouses: Organic solar cells and other technologies

  • Lamnatou, Chrysovalantou
  • Chemisana Villegas, Daniel
In light of the increasing environmental awareness, the present study is about life-cycle assessment of the Balance of System (BOS) of Photovoltaics (PVs), underlining the advantages of Organic Photovoltaics (OPVs). A closer look at the literature on PV shows that there is a dearth of studies which place emphasis on PVs with lightweight BOS systems, highlighting the importance of flexible/lightweight PV modules for buildings and greenhouses. To fill this literature gap, the present article sets out to: i) offer an overview of BOS, ii) analyse the environmental profile of the BOS of a grid-connected PV rooftop system, iii) estimate the avoided impacts of PV systems which need small amounts of BOS materials and iv) present critical factors for OPV greenhouses and PV challenges. Considering the results of the present study as well as results of other studies, BOS impacts range from: i) 6 to 181 kg CO2.eq/m2 of PV module, ii) 55 to 1900 MJprim/m2 of PV module. On the other hand, taking into account that the avoided impacts of a PV system are inextricably linked to the electricity mix of a certain country, a case study based on different electricity mixes (OPV system: Spain; Italy; Portugal) is presented., The authors would like to thank the Spanish MCIN/AEI/10.13039/ 501100011033 for the funding (grant reference: PID2019-111536RBI00; TED2021-132843B-I00). D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acad`emia award. Chr. Lamnatou is an Associate Professor of the Serra Húnter programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Energy and photosynthetic performance investigation of a semitransparent photovoltaic rooftop greenhouse for building integration

  • Moreno Bellostes, Àlex
  • Chemisana Villegas, Daniel
  • Lamnatou, Chrysovalantou
  • Maestro Balaguer, Santiago
The present article aims at evaluating semitransparent photovoltaic rooftop greenhouses based on organic photovoltaics and ethylene-tetrafluoroethylene. A RADIANCE/TRNSYS model is proposed. Five configurations (greenhouse roof with 0%, 25%, 50%, 75% and 100% photovoltaic-module covering) and two cities (Barcelona; Paris) have been evaluated. The findings reveal that an increase of the photovoltaic-covering surface reduces the overall energy demand of the greenhouse, but it also reduces the illumination that reaches the crops. For Barcelona, the optimal configuration for proper crop development (tomato; lettuce) is the one with 50% covering. For Paris, the optimal configuration is the one with 25% covering. In terms of energy, in the case of Barcelona, the part of the electricity demand of the greenhouse covered by the photovoltaics ranges from 14% to 63% whereas, in the case of Paris, these percentages range from 6% to 25.3%. As for the thermal behaviour of the building (adjacent office floor), the installation of the rooftop greenhouse reduces air-conditioning demand (around 30% for Barcelona and 37.7% for Paris (0% covering)). For Paris, the effect of the photovoltaic-covering percentage on the thermal demand of the adjacent floor is minimal. However, for Barcelona, it can reduce the airconditioning demand by 35% (scenario: 100% covering)., The authors would like to thank the Spanish MCIN/AEI/10.13039/ 501100011033 for the funding (grant reference: PID2019-111536RBI00; TED2021-132843B–I00). D. Chemisana thanks Institucio ´ Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acad`emia award. Chr. Lamnatou is an Associate Professor of the Serra Húnter programme. Furthermore, this research was supported by the Generalitat de Catalunya (2017 SGR1276). The authors would also like to acknowledge the collaboration with the company IASO SA. A short version of this study was presented during the 17th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES) held in Paphos, Cyprus, 6–10 November 2022. The title of the conference paper is as follows: Energy and Photosynthetic Performance Investigation of a Semitransparent Photovoltaic Rooftop Greenhouse for Building Integration.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Hybrid high-concentration photovoltaic-thermal solar systems for building applications

  • Moreno, A.
  • Chemisana Villegas, Daniel
  • Fernández, Eduardo F.
In situ photovoltaic-thermal (PVT) solar energy generation in buildings is an effective way to cover both thermal and electrical energy demands, mimizing losses and costs associated with transportation. High-concentration PVT (HCPVT) collectors present higher electrical conversion efficiencies, lower thermal dependence coefficients and the possibility of achieving higher temperature heat than conventional PVT systems. These features address the need of maximizing the energy generation in cities where there is very limited available space for renewable energy installations. In the present study, a HCPVT module has been designed, modelled and simulated. Simulations have been conducted for two representative cities with different climates but both suitable for solar concentration applications: Almería (Spain) and Lancaster (United States). The results demonstrate a very good performance in both locations, covering from 95% to 100% of the domestic hot water demand, and more than 55% of the space heating and cooling and electricity demands. Additionally, a comparison with a standard PVT solar collector has been carried out, indicating that the HCPVT system clearly outperforms the standard one in terms of the electricity and the thermal energy produced., The authors would like to thank ’’Ministerio de Economía y Competitividad’’ of Spain , “Ministerio de Ciencia e Innovación” for the funding (grant references ENE2016-81040-R & PID2019-111536RBI00) and “AGAUR” (2017 SGR 127). D. Chemisana thanks ’’Institucio ´ Catalana de Recerca i Estudis Avançats (ICREA)’’ for the ICREA Acad`emia award. E.F. Fern´ andez thanks the Spanish Ministry of Science, Innovation and Universities for the funds received under the Ramon ´ y Cajal program (RYC-2017-21910).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Energy performance and crop yield production of a semitransparent photovoltaic greenhouse

  • Moreno Bellostes, Àlex
  • Chemisana Villegas, Daniel
  • Fernández, Eduardo F.
Agrivoltaics have emerged as a viable solution to resolve conflicts arising from land-use competition between large photovoltaic solar installations and conventional agriculture. However, their implementation has not yet fully addressed the issue of social community rejection due to visual impact or making agricultural tasks more difficult. For this reason, integrating photovoltaics into existing agricultural infrastructure could offer a promising solution to mitigate this issue. The present research focuses on the analysis and modelling about the integration of two types of semitransparent organic photovoltaic (OPV) modules in multi-tunnel greenhouses. Two different representative locations of high density of greenhouses are selected: Almeria (Spain) and Agadir (Morocco). A holistic model based on Python/Trnsys/Radiance/TOMGRO is proposed to evaluate the energy, light, and tomato crop behaviour under various OPV coverage percentages and their positions on the greenhouse roof. The results demonstrate that higher OPV coverage percentages lead to a reduction in overall energy consumption in both locations. However, when looking at the illumination levels and weight of the tomato crop the tendency is opposite, resulting in insufficient illumination levels for some periods. This scenario presents a significant challenge in determining the optimal solution, owing to the difficulty in striking a balance between two essential goods: energy and food. In response to this, a strategy that slightly favours food production is adopted, aiming to minimise the impact on crop growth. From this perspective, the optimal solution for both locations is the use of OPV modules with 66 % coverage. This configuration is projected to satisfy about 50 % of the heating energy needs, but it may lead to a reduction in tomato yields by around 12 % with respect to a standard greenhouse., The authors would like to thank the Spanish MCIN/AEI/10.13039/ 501100011033 for the funding (grant reference: PID2019-111536RBI00; TED2021-132843B-I00; PLEC2022-009435). Alex Moreno Bellostes is a Serra Húnter Fellow. D. Chemisana thanks Institucio ´ Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acad`emia award. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

On mixed radial Moore graphs of diameter 3

  • Ceresuela, Jesús M.
  • López Lorenzo, Ignacio
  • Chemisana Villegas, Daniel
Radial Moore graphs and digraphs are extremal graphs related to the Moore ones where the distance-preserving spanning tree is preserved for some vertices. This leads to classify them according to their proximity to being a Moore graph or digraph. In this paper we deal with mixed radial Moore graphs, where the mixed setting allows edges and arcs as different elements. An exhaustive computer search shows the top ranked graphs for an specific set of parameters. Moreover, we study the problem of their existence by providing two infinite families for different values of the degrees and diameter 3. One of these families turns out to be optimal., The authors would like to thank “Ministerio de Ciencia e Innovaci´on” of Spain, MCIN/AEI/10.13039/501100011033 (grant references PID2019-111536RBI00 and PID2020-115442RB-I00) and AGAUR (grants references 2017SGR1158 and 2017SGR1276). Research of J. M. Ceresuela was supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (grant 2020 FISDU 00596). D. Chemisana thanks “Instituci´o Catalana de Recerca i Estudis Avan¸cats (ICREA)” for the ICREA Acad`emia award.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The Environmental Profile of a Building-Integrated Concentrating Photovoltaic System with Hexagonal Concentrators and Micro-Tracking: Embodied Energy and Other Indicators

  • Lamnatou, Chrysovalantou
  • Maestro, Santiago
  • Chemisana Villegas, Daniel
This paper aims to evaluate the eco-profile of a building-integrated concentrating photovoltaic system (photovoltaic-cell electrical efficiency: 21.6%; geometrical concentration ratio: 12.5×), extending previous work on the design and energetic/optical performance of this system (University of Lleida, Spain). There is a lack of studies on the eco-profile of these technologies; for this reason, this study is based on environmental life cycle assessment (case study: a building in Barcelona; tools: SimaPro/ecoinvent, inventory-of-carbon-and-energy). Focusing on global warming potential and cumulative energy demand, the impacts range from 341 to 507 kg CO2.eq/m2 and from 5660 to 7505 MJprim/m2. Energy and greenhouse-gas payback times vary between 2.5 and 6.7 years and are shorter than the useful life of this energy-generating element (pessimistic scenario: 15 years). Avoided-impact calculations have also been performed, verifying the benefits of this system during the use phase. Overall, the results are comparable to those of traditional photovoltaic systems. The additional advantage of the proposed modules is that they serve as an atrium and offer illumination, successfully combining the benefits of concentrating photovoltaics (high efficiency; reduction in the amount of solar-cell material required), two optical media (achromatic doublets), hexagonal solar concentrators (high packing efficiency) and micro-tracking (overcoming limitations of bulky external trackers)., The authors would like to thank the Ministerio de Ciencia e Innovación of Spain MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843B-I00). The research of S. Maestro was supported by the Secretaría General de Universidades del Ministerio de Universidades of Spain (grant FPU20/01189) and the Col·legi d’Enginyers Industrials de Catalunya (Beca Tesi Doctoral 2022 award). D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Chr. Lamnatou is a Serra Húnter fellow. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Household photovoltaic systems optimization methodology based on graph theory reliability

  • Ceresuela, Jesús M.
  • Chemisana Villegas, Daniel
  • López Lorenzo, Ignacio
A novel passive strategy to overcome the inconveniences of possible failure or underperformance of the components of a household scale photovoltaic (PV) system is proposed. The developed methodology is based on network reliability and determines the optimal array topology to be implemented under certain constraints through the maximization of a merit function that considers three different aspects: the total power that a structure produces, the power per panel ratio and the average reliability of the structure. Every factor is weighted through a parameter that controls its relative importance in the merit function. The restriction implemented in this study corresponds to the inherent limits in the voltage and current input of an inverter. The optimization process has been developed for several scenarios considering different decision criteria. Intuitive results are obtained when the optimization relies on the power per unit module and also when reliability is the main contributor in the merit function. When power production is preferred, structures with large number of panels prove to be the best even when they are asymmetrically connected and thus some panels are underperforming. A case study of a particular inverter has been developed to gain insight in an example, computing the optimal structure in terms of the three parameters., The authors would like to thank ‘‘Ministerio de Ciencia e Innovación’’ of Spain, MCIN/AEI/10.13039/501100011033 (grant references PID2019-111536RB-I00 and PID2020-115442RB-I00). Research of J. M. Ceresuela was supported by Secretaria d’Universi tats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya(grant 2020 FISDU 00596). D. Chemisana thanks ‘‘Institució Catalana de Recerca i Estudis Avançats (ICREA)’’ for the ICREA Acadèmia award.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Study of Full-Color Multiplexed Transmission Holograms of Diffusing Objects Recorded in Photopolymer Bayfol HX

  • Sevilla, Marina
  • Chemisana Villegas, Daniel
  • Atencia Carrizo, Jesús
  • Marín Sáez, Julia
A wavelength multiplexing procedure for color transmission volume holograms of diffusing objects recorded in Bayfol® HX200 photopolymer is proposed. For the recording, three lasers of 442 nm, 532 nm and 633 nm, and a Spectralon® diffusing object were used for monochromatic and polychromatic calibration. Monochromatic calibration shows that the maximum index modulation obtained for each wavelength was not enough to give 100% efficiency, although the efficiency values achieved in the case of monochromatic recordings with diffusing objects were high, at around 90% for 633 nm and 532 nm recordings, and 60% for 442 nm. The efficiency values obtained for multiplexed holograms were 19.1% for the 442 nm hologram, 25.9% for the 532 nm hologram and 15.2% for the 633 nm., This research was funded by the “Diputación General de Aragón-Fondo Social Europeo” (TOL research group, E44_17R), the “Generalitat de Catalunya” (2017FI_B2_00127 and 2017 SGR 1276) and the “Ministerio de Ciencia e Innovación” (PID2019-108598GB-I00, PID2019-111536RB-I00 and PID2021-114311RA-I00)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Fabrication and experimental validation of a building-integrated microtracking CPV system

  • Maestro, Santiago
  • Chemisana Villegas, Daniel
  • Baig, Hasan
Integrating microtracking concentrator photovoltaic (μT CPV) systems into buildings offers a pathway to energy-efficient and sustainable construction. To maximise solar energy generation in these applications while maintaining internal illumination, advanced optical designs are needed. This study focuses on the fabrication and experimental evaluation of a μT CPV's optical system, specifically designed for building-integrated applications, utilizing advanced optical concentrators (geometrical concentration of 12.5x) to focus sunlight onto high-efficiency silicon solar cells. We detail the optics design and fabrication process, including material selection, manufacturing, and integration strategies. Key performance metrics were evaluated through experimental testing under controlled and real-world conditions. Our findings demonstrate a maximum optical efficiency of 63.5 % and an average solar concentration of 7.9 suns in real-world scenarios. In conclusion, these results highlight the potential of building-integrated μT CPV systems to contribute to net-zero energy goals, enhance urban energy resilience, and promote the adoption of innovative solar technologies in the built environment., The authors would like to thanks “Ministerio de Ciencia e Innovación ” of Spain, MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843BI00). Research of S. Maestro was supported by “Secretaría General de Universidades del Ministerio de Universidades” of Spain (grant FPU20/ 01189) and “Col⋅legi Enginyers Industrials de Catalunya” for the “Beca Tesi Doctoral 2022” award. D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Design and performance evaluation of a Micro-CPV system for building integration applications

  • Maestro Balaguer, Santiago
  • Chemisana Villegas, Daniel
  • Moreno Bellostes, Àlex
The present research aims at developing a micro-CPV system with static optical elements designed to be placed at the exterior side of buildings to maximize building integration features. The optical system is formed by two optical media with differentiated Abbe number that are designed to minimize field curvature and chromatic aberrations to allow solar tracking by micro-movements of the PV receiver on a plane. An improved simultaneous multiple surface method has been applied to ensure that Fermat principle is met in all the interfaces of the optical system. The optical design angle of incidence range has been set from −40° to 40°. The maximum optical efficiency achieved has been ∼ 80 %. For and extended angular range of ± 70°, the system still operates but with an optical efficiency of ∼ 45 %. The system is intended to be integrated as a semitransparent glazing element allowing the diffuse irradiance to enter the building interior spaces for illumination purposes and the direct irradiance fraction to be concentrated onto the photovoltaic cells. Annual electricity production of 229 kWh/year has been obtained for 1 m2 aperture area system, placed as a part of a typical residential building in Barcelona (Spain)., The authors would like to thanks “Ministerio de Ciencia e Innovacion´ ” of Spain, MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843BI00). Research of S. Maestro was supported by “Secretaría General de Universidades del Ministerio de Universidades” of Spain (grant FPU20/ 01189) and “Col⋅legi Enginyers Industrials de Catalunya” for the “Beca Tesi Doctoral 2022” award. D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Optics for smart building-integrated photovoltaic systems

  • Maestro Balaguer, Santiago
  • Chemisana Villegas, Daniel
  • Lamnatou, Chrysovalantou
The tendency to integrate photovoltaic or photovoltaic/thermal modules into building envelope is changing due to the utilisation of optical elements for sunlight management. However, the viability of these systems mainly depends on two factors: 1) to offer cost-efficient solutions comparing to traditional building-integrated photovoltaic or photovoltaic/thermal systems, 2) to create designs, without being extremely difficult to manufacture and operate them on a large scale. In light of the issues mentioned above, this article presents a comparative analysis of the most relevant and recent smart building-integrated designs, including different optics. The designs have been categorised by the type of technology used to manage sunlight, placing emphasis on building-integrated applications. The results show that, in the case of reflective systems, the most usual designs are based on compound-parabolic-concentrators (usually: static; low concentration ratios). On the other hand, there are numerous configurations using total internal reflection to guide rays to photovoltaic cells. There are also hybrid systems (reflective/refractive) and different types of holograms, luminescent systems, etc., offering smart glazing elements and building-integrated solar panels. Key factors such as effective cooling devices and system functionality are discussed. Gaps in the literature on optical elements for building-integrated photovoltaics are identified. Future research directions are proposed., The authors would like to thank Ministerio de Ciencia e Innovación of Spain MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843B-I00). The research of S. Maestro was supported by the Secretaría General de Universidades del Ministerio de Universidades of Spain (grant FPU20/01189) and the Col⋅legi d’Enginyers Industrials de Catalunya (Beca Tesi Doctoral 2022 award). D. Chemisana thanks Institució o Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Chr. Lamnatou is an Associate Professor of the Serra Húnter programme. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Life-cycle assessment of solar façades – The role of ethylene tetrafluoroethylene in building-integrated applications

  • Lamnatou, Chrysovalantou
  • Moreno Bellostes, Àlex
  • Chemisana Villegas, Daniel
  • Riverola Lacasta, Alberto
  • Solans Barón, Alejandro
The present article sets out to investigate two façade-integrated systems with organic photovoltaics and ethylene tetrafluoroethylene, based upon life-cycle assessment. The proposed systems have been designed and experimentally evaluated at the University of Lleida, in Spain. The analysis involves two electricity mixes (Spanish; French), two cities (Barcelona; Paris), optimistic and pessimistic scenarios. In most cases, the energy-payback-time values are around 1–2 years, i.e. lower in comparison to system lifespan (10 years). Energy-return-on-investment values range from around 3 to 21. With regard to avoided greenhouse-gas emissions (lifetime), the results show around 1 t CO2.eq/kWp in Paris and about 5 t CO2.eq/kWp in Barcelona. Considering the Spanish electricity mix, the proposed solar systems offer: 1) avoided greenhouse-gas emissions which range from 76 to 157 kg CO2.eq/year, 2) avoided energy-demand impacts which, in most cases, are higher than 1500 MJprim/year, 3) avoided ReCiPe impacts which vary between 1.4 and 6.2 Pts/year (depending on the impact category). Results based on USEtox and Ecological footprint are also presented. Regarding limitations, the present study has been based on certain assumptions, embodied energy/embodied carbon, etc. Concerning future prospects, the proposed life-cycle model would be extended in order to include additional environmental indicators and methods., The authors would like to thank the Spanish MCIN/AEI/10.13039/501100011033 for the funding (grant reference: PID2019-111536RB-I00; TED2021-132843B-I00). D. Chemisana thanks Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia award. Chr. Lamnatou is an Associate Professor of the Serra Húnter programme. Furthermore, this research was supported by the Generalitat de Catalunya (2021 SGR 01618). The authors would also like to acknowledge the collaboration with the company IASO SA.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Solar Cells Operating under Thermal Stress

  • Vaillon, Rodolphe
  • Parola, Stéphanie
  • Lamnatou, Chrysovalantou
  • Chemisana Villegas, Daniel
Operating a solar cell under thermal stress at temperatures >100°C and up to 500°C seems counterintuitive because conversion efficiency drops dramatically. Even so, there are cases in which solar cells are in high-illumination high-temperature conditions, for near-the-sun space missions and in various terrestrial hybrid systems involving solar-to-thermal energy conversion. This review analyzes the progress of solar cells tested in the laboratory under thermal stress. The fundamental physics governing the thermal sensitivity of solar cells and the main criteria determining the ability of semiconductor materials to survive high temperatures are recalled. Materials and architectures of a selection of the solar cells tested so far are examined. Deviation from the Shockley-Queisser limit at each temperature is used for a fair assessment of the performances. Our analysis reveals the strengths and weaknesses of the existing technologies and the gaps to be filled to develop new classes of solar cells capable of withstanding high temperatures., This work was developed in the frame of the French program Investments for the Future managed by the National Agency for Research under contract ANR-10-LABX-22-01-SOLSTICE. C.L. is lecturer of the Serra Húnter programme. D.C. thanks the Institució Catalana de Recerca i Estudis Avançats (ICREA) for the ICREA Acadèmia, and the Ministerio de Ciencia e Innovación (project PID2019-111536RB-I00).