Skip to main content

DESCONTAMINACION Y TRATAMIENTO DURANTE EL PROCESADO CON ANTIMICROBIANOS NATURALES EN NANOEMULSION PARA GARANTIZAR LA SEGURIDAD DE BEBIDAS VEGETALES Y SMOOTHIES PASTEURIZADOS

PID2020-116318RB-C32

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2020
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD POLITÉCNICA DE CARTAGENA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multifactorial Shelf-life Prediction of Refrigerated Broccoli at the Household Level

  • Garre, Alberto
  • Aguayo, Encarna
  • Castillejo-Montoya, Noelia
[EN] Reducing fruit and vegetable waste at the household level would significantly contribute to decreasing the overall environmental impact of the food chain. Achieving this requires an understanding of the most critical factors in product quality to predict shelf life. Broccoli has been chosen to model this as it is consumed worldwide. To simulate consumer conditions, broccoli heads were purchased in bulk from a local supermarket and stored (in a disposable, compostable bag) at four storage temperatures (3, 5, 7, and 12 degrees C) for 13 days. Broccoli quality was evaluated using five factors: weight loss, vitamin C content, total phenolic content, chlorophyll content, and consumer acceptability. Individual shelf-life estimates were calculated for each factor independently using kinetic models and adequate threshold values. The product's shelf life was obtained by combining the individual estimates; consumer acceptability was noted as being the most relevant criterion at any temperature, followed by vitamin C content or weight loss depending on the storage temperature. However, the effect of temperature was nonlinear; variations within the 3-5 degrees C range had little impact on shelf life (13-14 days), whereas an increase to 7 degrees C would cause a significant reduction in shelf life (9 days). Hence, according to the fitted models, it is particularly important that the temperature of refrigerated broccoli is closely controlled within the range of 3 to 5 degrees C. This information is highly relevant to the industry, supermarkets, and the end consumer, as it emphasizes that temperature control of broccoli is essential to ensure the quality of the product throughout its shelf life, helping to reduce food waste., This Research was partly supported with the following projects: a) Spanish Ministry of Science and Innovation (MCIN) - National Research Agency (MCIN/AEI/10.13039/501100011033) and by "ERDF A way of making Europe", of the European Union [RTI2018-099139-B-C21]. b) PID2020-116318RB-C32 by the Spanish Ministry of Science and Research, MCIN/AEI/10.13039/501100011033 and c) AGROALNEXT programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Fundacion Seneca with funding from Comunidad Autonoma Region de Murcia (CARM). Alberto Garre acknowledges being funded by a Ramon y Cajal Fellowship (RYC-2021-034612-I). Noelia Castillejo is grateful for her contract which has been co-financed by Juan de la Cierva (JDC2022-049432-I) from MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU/PRTR". DAS:No datasets were generated or analysed during the current study.
IRTA Pubpro. Open Digital Archive
Publication Artículo científico (JournalArticle)

Challenges and opportunities related to the use of innovative modelling approaches and tools for microbiological food safety management

  • Allende, Ana
  • Bover-Cid, Sara
  • Fernández, Pablo S.
Modelling in food microbiology has become an indispensable approach in food safety to generate predictions about the microbial behaviour. One of its weaknesses is the lack of reliable and relevant data for mathematical modelling. The increasing amounts of data and innovative modelling tools have the potential to provide relevant information on hazard, exposure, and surveillance reports. They can be combined to reduce the time needed to perform a risk assessment, improving food safety management decisions. Future tools will follow a multidisciplinary scope of action, including food microbiology, process engineering and technology, innovative mathematical modelling approaches, holistic perspective in risk assessment and multicriteria analysis beyond the health impact (risks–benefits) to provide appropriate risk mitigation and control options. When predictive modelling is used to establish risk management strategies able to reduce food safety risks, uncertainty analysis and communication are needed to provide a transparent answer indicating the limitations of the outcome., info:eu-repo/semantics/acceptedVersion
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Challenges and opportunities related to the use of innovative modelling approaches and tools for microbiological food safety management

  • Allende, Ana
  • Bover-Cid, Sara
  • Fernández, Pablo S.
Modelling in food microbiology has become an indispensable approach in food safety to generate predictions about the microbial behaviour. One of its weaknesses is the lack of reliable and relevant data for mathematical modelling. The increasing amounts of data and innovative modelling tools have the potential to provide relevant information on hazard, exposure, and surveillance reports. They can be combined to reduce the time needed to perform a risk assessment, improving food safety management decisions. Future tools will follow a multidisciplinary scope of action, including food microbiology, process engineering and technology, innovative mathematical modelling approaches, holistic perspective in risk assessment and multicriteria analysis beyond the health impact (risks¿benefits) to provide appropriate risk mitigation and control options. When predictive modelling is used to establish risk management strategies able to reduce food safety risks, uncertainty analysis and communication are needed to provide a transparent answer indicating the limitations of the outcome., The authors acknowledge the following funding sources: Fernández, Ministerio de Ciencia e Innovación (Project PID2020-116318RB-C32). Allende, Ministerio de Ciencia e Innovación (Project PID2019-104931RB-I00). Bover-Cid, Ministerio de Ciencia e Innovación (Project RTI2018-099195-R-I00) and CERCA Programme/Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A secondary model for the effect of pH on the variability in growth fitness of Listeria innocua strains

  • Garcia-Gutierrez, Enriqueta
  • Monteoliva García, Gonzalo
  • Bodea, Ioana
  • Cotter, Paul D.
  • Iguaz, Asunción
  • Garre, Alberto
6 Pág., Variability in microbial growth is a keystone of modern Quantitative Microbiological Risk Assessment (QMRA). However, there are still significant knowledge gaps on how to model variability, with the most common assumption being that variability is constant. This is implemented by an error term (with constant variance) added on top of the secondary growth model (for the square root of the growth rate). However, this may go against microbial ecology principles, where differences in growth fitness among bacterial strains would be more prominent in the vicinity of the growth limits than at optimal growth conditions. This study coins the term "secondary models for variability", evaluating whether they should be considered in QMRA instead of the constant strain variability hypothesis. For this, 21 strains of Listeria innocua were used as case study, estimating their growth rate by the two-fold dilution method at pH between 5 and 10. Estimates of between-strain variability and experimental uncertainty were obtained for each pH using mixed-effects models, showing the lowest variability at optimal growth conditions, increasing towards the growth limits. Nonetheless, the experimental uncertainty also increased towards the extremes, evidencing the need to analyze both sources of variance independently. A secondary model was thus proposed, relating strain variability and pH conditions. Although the modelling approach certainly has some limitations that would need further experimental validation, it is an important step towards improving the description of variability in QMRA, being the first model of this type in the field., This Research was partly funded with project PID2020-116318RB-C32 by the Spanish Ministry of Science and Research, MCIN/AEI/10.13039/501100011033, as well as by the AGROALNEXT programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Fundación Séneca with funding from Comunidad Autónoma Región de Murcia (CARM). Alberto Garre acknowledges being funded by a Maria Zambrano Scholarship and by a Ramon y Cajal Fellowship (RYC-2021-034612-I). This work was supported by Enterprise Ireland and the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement number 847402 awarded to EG-G, who was also funded by a Beatriz Galindo scholarship from the Spanish Ministry of Universities (BG22/00060). Work in the Cotter laboratory is also funded by the European Union's Horizon 2020 research and innovation programme, under the MASTER project (grant number 818368), by Science Foundation Ireland (SFI) under grant number SFI/12/RC/2273_P2 (APC Microbiome Ireland SFI Research Centre), and by SFI together with the Irish Department of Agriculture, Food, and the Marine under grant number SFI/16/RC/3835 (VistaMilk SFI Research Centre). Research in the Cotter laboratory is also funded by Enterprise Ireland and industry in the Food for Health Ireland (FHI)-3 project under grant number TC/2018/0025. Dr. Bodea was supported by an EU-FORA fellowship (GP/EFSA/ENCO/2021/01-GA9)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Application of High Hydrostatic Pressure in fresh purple smoothie: Microbial inactivation kinetic modelling and qualitative studies

  • González-Tejedor, Gerardo
  • Garre, Alberto
  • Egea, José A.
  • Aznar, A.
  • Artés-Hernández, Francisco
  • Fernández, Pablo S.
The inactivation kinetics of Listeria monocytogenes during High Hydrostatic Pressure (HHP) treatments was studied in a purple smoothie based of fresh fruit and vegetables. Pressure intensity studied was 300, 350, 400 and 450 MPa. Untreated samples were used as control. Furthermore, the effects on quality attributes (sensory, total soluble solids content, colour, titratable acidity, pH, vitamin C and total phenolics content) were also monitored. Microbial inactivation was modelled as a function of the HHP intensity using the Geeraerd model. Shoulder and tail effects were observed only for the 300 MPa pressure assayed, supporting a multiple hit kinetic inactivation of critical factors. Increasing the HHP intensity resulted in a faster inactivation with tailing. A strong positive correlation was observed between the pressure level and the inactivation rate (k). Hence, a linear model was used to describe the relationship between both variables. Nevertheless, further data are required to confirm this secondary model. Quality was mostly unaffected by the HHP treatments, except for the vitamin C content, which reported reductions of 26 and 21% after 300 and 350 MPa, respectively. In conclusion, HHP can be a viable technology for processing fruit and vegetable-based smoothies to preserve quality and safety. A pressure of 400 MPa is advisable to ensure an efficient microbial inactivation with the best sensory and nutritional quality retention, The financial support of this research was provided by the Ministerio de Ciencia e Innovación, Spain (Projects PID2020-116318RB-C32 and AGL2017−48830−C2−1−R) and by FEDER funds. G.A. González − Tejedor thanks to Panamá Government for the scholarship awarded to carry out his PhD Thesis and the National Research System (SNI) of SENACYT, Panama by the support. A. Garre is grateful to Fundación SENECA for awarding him a post − doctoral grant, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Kinetic modelling of anthocyanins and vitamin C degradation in a maqui-citrus beverage during storage for different sweeteners and pasteurization treatments

  • Hernández-Prieto, Diego
  • Salar, Francisco J.
  • Garre, Alberto
  • Fernández, Pablo S.
  • García-Viguera, Cristina
  • Frías, Jesús
Kinetic models to describe the degradation of anthocyanins (first-order model) and vitamin C (system of ordinary differential equations) in a novel beverage, has been used as a tool to identify the most relevant variables for the degradation kinetics and to support shelf-life estimation. The models were based on an empirical dataset, accounting for the effect of a prior processing treatment (HHP at 400 MPa- 180s; HHP at 600 MPa-180s; thermal treatment at 85 °C for 15s), storage temperature (4 or 20 °C), and the use of two different sweeteners (sucralose or stevia). Using model selection (based on AIC), we conclude that the degradation kinetics depends on a complex combination of process and product parameters. A strong temperature dependence on anthocyanins and vitamin C was observed during pasteurization. Products treated by HHP resulted in higher vitamin C concentrations during storage than those thermally treated. Finally, an interaction with the sweetener resulted in a slight stabilization of bioactive compounds. In conclusion, this study demonstrates the complexity of the degradation process of bioactive compounds in these beverages, advocating that nonlinear kinetic models serve as a tool to identify the most relevant parameters, ultimately supporting product formulation and shelf life estimation, This research was funded by the Spanish MINECO, grant number (PID 2019-104212 R B-I00/AEI/10.13039/501,100,011,033). D.H.-P. was supported by an FPI grant (PRE 2020-094,973). F.J.S. was supported by an FPU (FPU18/00332) grant of the fellowship program from the Spanish Ministry of Science, Innovation, and Universities (MICIU). We also thank Hiperbaric S.A. for their support applying high pressure treatments to the beverages. The research was partly funded with project PID 2020-116318 R B-C32 by the Spanish Ministry of Science and Research, MCIN/AEI/10.13039/501,100,011,033, as well as by the AGROALNEXT programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and by Fundación Séneca with funding from Comunidad Autónoma Región de Murcia (CARM). Alberto Garre acknowledges being funded by a Ramon y Cajal Fellowship (RYC-2021-034612-I), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal experimental design (OED) for the growth rate of microbial populations. Are they really more “optimal” than uniform designs?

  • Guillén, Silvia
  • Possas, Aricia
  • Valero, Antonio
  • Garre, Alberto
Secondary growth models from predictive microbiology can describe how the growth rate of microbial populations varies with environmental conditions. Because these models are built based on time and resource consuming experiments, model-based Optimal Experimental Design (OED) can be of interest to reduce the experimental load. In this study, we identify optimal experimental designs for two common models (full Ratkowsky and Cardinal Parameters Model (CPM)) for a different number of experiments (10–30). Calculations are also done fixing one or more model parameters, observing that this decision strongly affects the layout of the OED. Using in silico experiments, we conclude that OEDs are more informative than conventional (equidistant) designs with the same number of experiments. However, OEDs cluster the experiments near the growth limits (Xmin and Xmax) resulting in impractical designs with aggregated experimental runs ~10 times longer than conventional designs. To mitigate this, we propose a novel optimality criterion (i.e., the objective function) that accounts for the aggregated time. The novel criterion provides a reduction in parameter uncertainty with respect to the conventional design, without an increase in the experimental load. These results underline that an OED is only based on information theory (Fisher information), so the results can be impractical when actual experimental limitations are considered. The study also emphasizes that most OED schemes identify where to measure, but do not give an indication on how many experiments should be made. In this sense, numerical simulations can estimate the parameter uncertainty that would be obtained for a particular experimental design (OED or not). These results and methodologies (available in Open Code) can guide the design of future experiments for the development of secondary growth models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of the antimicrobial effect of a nanoemulsified D-limonene washing solution for cherry tomatoes against Staphylococcus aureus and Meyerozyma guilliermondii – Impact on consumer protection

  • Luciano, Antonio
  • Espaillat, Noel A.
  • Espaillat, Natanael
  • Baixauli, Jorge
  • Garre, Alberto
  • Palop, Alfredo
  • Guillen, Silvia
Although a washing step is essential for the safety of fresh vegetables, chlorine-based solutions may have negative effects on workers and consumers. This study evaluates an alternative washing solution based on nanoemulsified D-limonene against Staphylococcus aures (a relevant pathogen) and Meyerozyma guilliermondii (a model spoilage yeast) on cherry tomato surface. The antimicrobial effect depended on both the EO concentration (1 mM–200 mM) and different exposure time (0.5–15 min). The EO washing solution caused up to 1.7 ± 0.2 log-reductions in M. guilliermondii, being even more effective than the commercial one (1.3 ± 0.1 log-reductions). As the effect of the EO solution on S. aureus was lower (1.4 ± 0.3 vs. 1.7 ± 0.2 log-reductions), consumer protection was evaluated using a QMRA. Although exposure would be higher due to the slightly lower antimicrobial effect, this would not impact consumer protection (median estimate of 0 cases per 1,000,000 servings, with 90th percentile of 1.9·10−7 in both cases). Therefore, despite further research being needed to ensure the commercial viability of these alternative washing solutions, our results emphasize their great promise as an alternative food safety control system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Revisiting secondary model features for describing the shoulder and lag parameters of microbial inactivation and growth models

  • Garre, Alberto
  • Valdramidis, Vasilis
  • Guillén, Silvia
The Baranyi and Geeraerd models are two of the most reliable models for the description of, respectively, microbial growth and inactivation. They are defined as a system of differential equations, whose algebraic solution can describe the microbial response during isothermal conditions, especially when combined with suitable secondary models. However, there are still large uncertainties regarding the best functions to use as secondary models for the lag phase duration (λ) and the shoulder length (Sl). In this article, we revisit these models, focusing on the implications related to the assumption of an ideal substance whose dynamics define bacterial adaptation. We demonstrate that their link with the isothermal lag and shoulder leads to unique secondary models for the effect of temperature changes on λ and Sl. Namely, a log-linear relationship for Sl and a reverse cuadratic relationship for λ (considering a Ratkowsky model for μ). Furthermore, we observe a coupling between both secondary models (k and Sl for Geeraerd; λ and μ for Baranyi), reducing the number of unknown model parameters from four to three. Using data from the scientific literature, we illustrate the applicability of these results, being able to improve the robustness of parameter estimates. The identification of these links are of great relevance for the field of predictive microbiology, as they resolve the uncertainty regarding the functional form of secondary models. Our results also provide a way to assess the validity of those dynamic hypotheses using data gathered under isothermal conditions, something that was hardly possible using data gathered under dynamic conditions. Although this study is limited to the effect of temperature, the general approach and methodology are also applicable to other type of secondary models, so this article can be a blueprint for future studies.
Repositorio Digital UPCT
Publication Artículo científico (JournalArticle)

Multiobjective optimization of a frying process balancing acrylamide formation and quality: solution analysis and uncertainty propagation

  • Peñalver Soto, José Lucas
  • Muñoz Guillermo, María
  • Garre Pérez, Alberto
  • Iguaz Gainza, Asunción
  • Fernández Escámez, Pablo Salvador
  • Egea Larrosa, José Alberto
In this study, we performed multi-objective model-based optimization of a potato-frying process balancing between acrylamide production and a quality parameter (yellowness). Solution analysis revealed that, for most of the Pareto solutions, acrylamide levels exceeded the EFSA recommendation. Almost equivalent optimal solutions were found for moderate processing conditions (low temperatures and/or processing times) and the propagation of the uncertainty of the acrylamide production model parameters led to Pareto fronts with notable differences from the one obtained using the nominal parameters, especially in the ranges of high values of acrylamide production and yellowness. These results can help to identify processing conditions to achieve the desired acrylamide/yellowness balance and design more robust processes allowing for the enhancement of flexibility when equivalent optimal solutions can be retrieved., This work has been supported by the Spanish Research Agency—AEI (MCIN/AEI/10.13039/ 501100011033) through projects PID2020-116318RB-C32 and MTM2017-84079-P (co-funded by “ERDF A way of making Europe”, by the European Union). JLPS is grateful to the JAE-INTRO program from CSIC (Grant no JAEINT_19_00775).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Challenges and opportunities related to the use of innovative modelling approaches and tools for microbiological food safety management

  • Allende, Ana
  • Bover-Cid, Sara
  • Fernández, Pablo S.
Modelling in food microbiology has become an indispensable approach in food safety to generate predictions about the microbial behaviour. One of its weaknesses is the lack of reliable and relevant data for mathematical modelling. The increasing amounts of data and innovative modelling tools have the potential to provide relevant information on hazard, exposure, and surveillance reports. They can be combined to reduce the time needed to perform a risk assessment, improving food safety management decisions. Future tools will follow a multidisciplinary scope of action, including food microbiology, process engineering and technology, innovative mathematical modelling approaches, holistic perspective in risk assessment and multicriteria analysis beyond the health impact (risks–benefits) to provide appropriate risk mitigation and control options. When predictive modelling is used to establish risk management strategies able to reduce food safety risks, uncertainty analysis and communication are needed to provide a transparent answer indicating the limitations of the outcome., info:eu-repo/semantics/acceptedVersion