Skip to main content

Advancing Microbial Risk Assessment through novel mathematical methods and software applications

RYC2021-034612-I

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD POLITÉCNICA DE CARTAGENA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multifactorial Shelf-life Prediction of Refrigerated Broccoli at the Household Level

  • Garre, Alberto
  • Aguayo, Encarna
  • Castillejo-Montoya, Noelia
[EN] Reducing fruit and vegetable waste at the household level would significantly contribute to decreasing the overall environmental impact of the food chain. Achieving this requires an understanding of the most critical factors in product quality to predict shelf life. Broccoli has been chosen to model this as it is consumed worldwide. To simulate consumer conditions, broccoli heads were purchased in bulk from a local supermarket and stored (in a disposable, compostable bag) at four storage temperatures (3, 5, 7, and 12 degrees C) for 13 days. Broccoli quality was evaluated using five factors: weight loss, vitamin C content, total phenolic content, chlorophyll content, and consumer acceptability. Individual shelf-life estimates were calculated for each factor independently using kinetic models and adequate threshold values. The product's shelf life was obtained by combining the individual estimates; consumer acceptability was noted as being the most relevant criterion at any temperature, followed by vitamin C content or weight loss depending on the storage temperature. However, the effect of temperature was nonlinear; variations within the 3-5 degrees C range had little impact on shelf life (13-14 days), whereas an increase to 7 degrees C would cause a significant reduction in shelf life (9 days). Hence, according to the fitted models, it is particularly important that the temperature of refrigerated broccoli is closely controlled within the range of 3 to 5 degrees C. This information is highly relevant to the industry, supermarkets, and the end consumer, as it emphasizes that temperature control of broccoli is essential to ensure the quality of the product throughout its shelf life, helping to reduce food waste., This Research was partly supported with the following projects: a) Spanish Ministry of Science and Innovation (MCIN) - National Research Agency (MCIN/AEI/10.13039/501100011033) and by "ERDF A way of making Europe", of the European Union [RTI2018-099139-B-C21]. b) PID2020-116318RB-C32 by the Spanish Ministry of Science and Research, MCIN/AEI/10.13039/501100011033 and c) AGROALNEXT programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Fundacion Seneca with funding from Comunidad Autonoma Region de Murcia (CARM). Alberto Garre acknowledges being funded by a Ramon y Cajal Fellowship (RYC-2021-034612-I). Noelia Castillejo is grateful for her contract which has been co-financed by Juan de la Cierva (JDC2022-049432-I) from MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU/PRTR". DAS:No datasets were generated or analysed during the current study.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Differences due to sex and seetener on the boavailability of (Poly)phenols in urine samples: a machine learning approach

  • Hernández-Prieto, Diego
  • Garre, Alberto
  • Agulló, Vicente
  • García-Viguera, Cristina
  • Egea, José A.
Metabolic diseases have been related to the overdrinking of high-sugar content beverages. As a result, the demand for alternative formulations based on plant-based ingredients with health-promoting properties has increased during the last few years. Nonetheless, the design and production of effective formulations requires understanding the bioavailability of these compounds. For this purpose, a two-month longitudinal trial with 140 volunteers was conducted to measure the beneficial effects of a maqui–citrus beverage, rich in (poly)phenols. From data obtained by quantifying metabolites present in urine samples, biostatistical and machine learning (data imputation, feature selection, and clustering) methods were applied to assess whether a volunteer’s sex and the sweetener added to the beverage (sucrose, sucralose, or stevia) affected the bioavailability of (poly)phenol metabolites. Several metabolites have been described as being differentially influenced: 3,4-dihydroxyphenylacetic acid and naringenin with its derivatives were positively influenced by stevia and men, while eriodictyol sulfate and homoeridictyol glucunoride concentrations were enhanced with stevia and women. By examining groups of volunteers created by clustering analysis, patterns in metabolites’ bioavailability distribution as a function of sex and/or sweeteners (or even due to an uncontrolled factor) were also discovered. These results underline the potential of stevia as a (poly)phenol bioavailability enhancer. Furthermore, they also evidence sex affects the bioavailability of (poly)phenols, pointing at a sex-dependent metabolic pathway regulation., This research was funded by the Spanish MINECO, grant number (PID2019-104212RB-I00/AEI/10.13039/501100011033). D.H.-P. was supported by an FPI grant (PRE2020-094973). A.G. was supported by a Ramón y Cajal scholarship (RYC2021-034612-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Kinetic modelling of anthocyanins and vitamin C degradation in a maqui-citrus beverage during storage for different sweeteners and pasteurization treatments

  • Hernández-Prieto, Diego
  • Salar, Francisco J.
  • Garre, Alberto
  • Fernández, Pablo S.
  • García-Viguera, Cristina
  • Frías, Jesús
Kinetic models to describe the degradation of anthocyanins (first-order model) and vitamin C (system of ordinary differential equations) in a novel beverage, has been used as a tool to identify the most relevant variables for the degradation kinetics and to support shelf-life estimation. The models were based on an empirical dataset, accounting for the effect of a prior processing treatment (HHP at 400 MPa- 180s; HHP at 600 MPa-180s; thermal treatment at 85 °C for 15s), storage temperature (4 or 20 °C), and the use of two different sweeteners (sucralose or stevia). Using model selection (based on AIC), we conclude that the degradation kinetics depends on a complex combination of process and product parameters. A strong temperature dependence on anthocyanins and vitamin C was observed during pasteurization. Products treated by HHP resulted in higher vitamin C concentrations during storage than those thermally treated. Finally, an interaction with the sweetener resulted in a slight stabilization of bioactive compounds. In conclusion, this study demonstrates the complexity of the degradation process of bioactive compounds in these beverages, advocating that nonlinear kinetic models serve as a tool to identify the most relevant parameters, ultimately supporting product formulation and shelf life estimation, This research was funded by the Spanish MINECO, grant number (PID 2019-104212 R B-I00/AEI/10.13039/501,100,011,033). D.H.-P. was supported by an FPI grant (PRE 2020-094,973). F.J.S. was supported by an FPU (FPU18/00332) grant of the fellowship program from the Spanish Ministry of Science, Innovation, and Universities (MICIU). We also thank Hiperbaric S.A. for their support applying high pressure treatments to the beverages. The research was partly funded with project PID 2020-116318 R B-C32 by the Spanish Ministry of Science and Research, MCIN/AEI/10.13039/501,100,011,033, as well as by the AGROALNEXT programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17. I1) and by Fundación Séneca with funding from Comunidad Autónoma Región de Murcia (CARM). Alberto Garre acknowledges being funded by a Ramon y Cajal Fellowship (RYC-2021-034612-I), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal experimental design (OED) for the growth rate of microbial populations. Are they really more “optimal” than uniform designs?

  • Guillén, Silvia
  • Possas, Aricia
  • Valero, Antonio
  • Garre, Alberto
Secondary growth models from predictive microbiology can describe how the growth rate of microbial populations varies with environmental conditions. Because these models are built based on time and resource consuming experiments, model-based Optimal Experimental Design (OED) can be of interest to reduce the experimental load. In this study, we identify optimal experimental designs for two common models (full Ratkowsky and Cardinal Parameters Model (CPM)) for a different number of experiments (10–30). Calculations are also done fixing one or more model parameters, observing that this decision strongly affects the layout of the OED. Using in silico experiments, we conclude that OEDs are more informative than conventional (equidistant) designs with the same number of experiments. However, OEDs cluster the experiments near the growth limits (Xmin and Xmax) resulting in impractical designs with aggregated experimental runs ~10 times longer than conventional designs. To mitigate this, we propose a novel optimality criterion (i.e., the objective function) that accounts for the aggregated time. The novel criterion provides a reduction in parameter uncertainty with respect to the conventional design, without an increase in the experimental load. These results underline that an OED is only based on information theory (Fisher information), so the results can be impractical when actual experimental limitations are considered. The study also emphasizes that most OED schemes identify where to measure, but do not give an indication on how many experiments should be made. In this sense, numerical simulations can estimate the parameter uncertainty that would be obtained for a particular experimental design (OED or not). These results and methodologies (available in Open Code) can guide the design of future experiments for the development of secondary growth models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of the antimicrobial effect of a nanoemulsified D-limonene washing solution for cherry tomatoes against Staphylococcus aureus and Meyerozyma guilliermondii – Impact on consumer protection

  • Luciano, Antonio
  • Espaillat, Noel A.
  • Espaillat, Natanael
  • Baixauli, Jorge
  • Garre, Alberto
  • Palop, Alfredo
  • Guillen, Silvia
Although a washing step is essential for the safety of fresh vegetables, chlorine-based solutions may have negative effects on workers and consumers. This study evaluates an alternative washing solution based on nanoemulsified D-limonene against Staphylococcus aures (a relevant pathogen) and Meyerozyma guilliermondii (a model spoilage yeast) on cherry tomato surface. The antimicrobial effect depended on both the EO concentration (1 mM–200 mM) and different exposure time (0.5–15 min). The EO washing solution caused up to 1.7 ± 0.2 log-reductions in M. guilliermondii, being even more effective than the commercial one (1.3 ± 0.1 log-reductions). As the effect of the EO solution on S. aureus was lower (1.4 ± 0.3 vs. 1.7 ± 0.2 log-reductions), consumer protection was evaluated using a QMRA. Although exposure would be higher due to the slightly lower antimicrobial effect, this would not impact consumer protection (median estimate of 0 cases per 1,000,000 servings, with 90th percentile of 1.9·10−7 in both cases). Therefore, despite further research being needed to ensure the commercial viability of these alternative washing solutions, our results emphasize their great promise as an alternative food safety control system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal strategies for estimating the parameters of the Baranyi-Ratkowsky model: from (optimal) experiment design to model fitting methods

  • Garre, Alberto
  • Tsagkaropoulou, Theocharia
  • Guillén, Silvia
  • Karatzas, Kimon Andreas G.
  • Palop, Alfredo
The Baranyi growth model combined with the Ratkowsky secondary model (Baranyi-Ratkowsky hereafter) has demonstrated their reliability for describing microbial growth as a function of temperature. However, these models are based on empirical parameters that must be estimated from data, so robustness depends on the experimental design and the model fitting approach. This study applies a rigorous statistical analysis based on Information Theory and numerical simulations to provide clear guidelines on the best model fitting approaches and experimental designs for the Baranyi-Ratkowsky model. First, the study concludes that one-step fitting approaches result in lower parameter dispersion than two-steps approaches (for the simulated conditions: 44 %, 85 % and 96 % lower for , and , respectively, no reduction for and ). Numerical simulations demonstrate that, unlike for two-steps methods, the error of regression from the one-step approach is a realistic estimate of parameter uncertainty/variability, strengthening the case for this method. This motivates restricting the calculation of Optimal Experiment Designs (OEDs) for this approach only. The study clearly demonstrates that the experimental design has a clear impact on parameter dispersion. However, OEDs tend to be impractical, as they focus on conditions that require long experimental runs. Accordingly, a penalty term is introduced in OED definition, resulting in two strategies: to lower the number of experiments at lower temperatures, and to terminate the experiments at lower temperatures before reaching stationary phase. Based on this result, we propose a staggered experimental design that is updated recursively (storage temperature and position of time points) until convergence. Considering that isothermal experiments are still the gold standard in the field, future studies could greatly benefit from these suggestions by minimizing the experimental effort needed to obtain robust estimates for the Baranyi-Ratkowsky model.