Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dual Composite Right-/Left-Handed Coplanar Waveguide Transmission Line Using Inductively Connected Split-Ring Resonators

  • Belenguer Martínez, Ángel
  • Cascón López, Joaquín
  • Lucas Borja, Alejandro
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this paper, a simple geometrical modification of the well-known split-ring resonator (SRR) topology is proposed. This modification consists of joining the opposite sides of the rings by means of an inductive connection. Due to this modification, it is possible to synthesize a dual composite right-/left-handed artificial transmission line from a host coplanar waveguide (CPW). In addition, it is quite straightforward to synthesize a dual balanced line showing a wider transmission bandwidth (around 13% for 3 GHz and 8% for 6 GHz) with this new SRR geometry. In fact, in order to design a balanced line, one must just modify the inductance of the direct connection between the rings, which can be derived from the equivalent circuit of this new ring, which is also presented in this paper. The final result is a balanced artificial CPW transmission line with a dual composite right-/left-handed behavior. In this case, the right-handed transmission band is placed below the left-handed one, and there is no frequency separation between both transmission bands. © 1963-2012 IEEE., This work was supported in part by the Ministerio de Ciencia e Innovacion, Spanish Goverment, under Research Projects TEC2010-21520-C04-03 and TEC2010-21520-C04-01 and by the Autonomous Government of Castilla-La Mancha under Research Projects PPII10-0047-0220 and PPII10-0027-1277.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Wideband passband transmission line based on metamaterial-inspired CPW balanced cells

  • Lucas Borja, Alejandro
  • Belenguer Martínez, Ángel
  • Cascón López, Joaquín
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
In this letter, a balanced metamaterial-inspired coplanar waveguide transmission line with enhanced bandwidth is presented. The coplanar waveguide line is composed of a basic cell with two split-ring resonators, two series capacitances (interdigital capacitors), two wide shunt inductances (metallic strips), and four shunt capacitances (implemented through open-ended stubs). The use of split-ring resonators together with metallic shunt strips provides negative permeability and permittivity, respectively. Likewise, the employment of additional series and shunt capacitances permits to control both the left-and right-handed bands, thus achieving a balanced composite transmission line. The configuration exhibits a wide bandpass response as a result of this balance between advance and delay phase offsets. The interpretation is based on an equivalent circuit model, full-wave electromagnetic analysis, and measured responses of a prototype designed for microwave (C-band) frequency operation. Due to the small dimensions of the resonators employed, the resulting line is very compact. Potential use of these transmission lines can be foreseen in many applications concerning planar microwave devices with severe size restrictions and wide frequency bandpass responses., Manuscript received November 05, 2011; accepted November 27, 2011. Date of publication December 07, 2011; date of current version December 22, 2011. This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government under Research Project TEC2010-21520-C04 and the Autonomous Government of Castilla-La Mancha under Research Project PPII10-0027-1277.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Broadband Equivalent Circuit Model for a Coplanar Waveguide Line Loaded with Split Ring Resonators

  • Sanz, Victor
  • Belenguer Martínez, Ángel
  • Lucas Borja, Alejandro
  • Cascón López, Joaquín
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
A new equivalent circuit for a coplanar waveguide loaded with split ring resonators is presented. The traditional circuits that model these devices are only able to characterize the left-handed propagation band, and their response is very similar to the real one within a very limited bandwidth. In contrast, this proposed broadband equivalent circuit is able to portray not only the left-handed propagation band, but also the right-handed one that occurs at higher frequencies. Besides, the response of this kind of basic cells can be adjusted with the proposed circuit model in a bandwidth close to a decade., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Goverment, under Research Projects TEC2010-21520-C04-03 and -01, and by the Autonomous Government of Castilla-La Mancha under Research Projects PPII10-0047-0220 and PPII10-0027-1277.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Balanced Dual Composite Right/Left-Handed Microstrip Line With Modified Complementary Split-Ring Resonators

  • Belenguer Martínez, Ángel
  • Lucas Borja, Alejandro
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This letter presents a dual composite right/left-handed microstrip line loaded with modified complementary split-ring resonators. In this particular case, the well-known resonant particle employed has been capacitively loaded in order to obtain a balanced frequency response. The inclusion of this capacitive element has two main effects. On the one hand, the right-and left-handed bands are interchanged; on the other hand, the possibility to control the position of the right-handed band, while maintaining the left-handed one unaltered. Consequently, it is relatively simple to design balanced transmission lines with improved bandwidth and reconfigurable properties. In addition, the equivalent circuit that describes the electromagnetic behavior of the structure has been obtained. Finally, a prototype has been fabricated and measured to confirm experimentally the validity of the proposed design., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Goverment, under Research ProjectsTEC2010-21520-C04-03 and -01 and the Autonomous Government of Castilla-La Mancha under Research Projects PPII10-0047-0220 and PPII10-0027-1277.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A controllable bandwidth filter using varactor-loaded metamaterial-inspired transmission lines

  • Lucas Borja, Alejandro
  • Carbonell Olivares, Jorge
  • Lippens, Didier
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This letter presents a tunable bandwidth bandpass filter based on varactor-loaded metamaterial coplanar waveguide (CPW) lines. The CPW lines are based on series gaps and split-ring resonators. The varactors are reverse-biased semiconductor diodes connected between both sides of each series gap. This configuration, directly inspired from the so-called metamaterial technology, takes advantage of the high dispersion of the loaded transmission line. Therefore, strong permittivity and permeability responses induced by means of the resonators are obtained. A single varactor-loaded transmission line is first analyzed. Then, a third-order tunable filter with fractional bandwidth tuning range from 5.8% to 21.5% is experimentally assessed. The proposed filters can be used in several practical applications such as multichannel wireless and satellite communication systems, where reconfigurable devices are often required., This work was supported in part by the Centre National d'Etudes Spatiales (CNES), the Ministerio de Ciencia e Innovacion, Spanish Government under Research Project TEC2010-21520-C04, and the Autonomous Government of Castilla-La Mancha under Research Projects PPII10-0027-1277 and TC20112325.