Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ultrafast transient liquid assisted growth of high current density superconducting films

  • Soler, Laia
  • Jareño Cerulla, Julia
  • Banchewski, Juri
  • Rasi, Silvia
  • Chamorro, Natalia
  • Guzmán, Roger
  • Yáñez, Ramón
  • Mocuta, Cristian
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Obradors, Xavier
  • Puig Molina, Teresa
The achievement of high growth rates in YBa2Cu3O7 epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s−1) and high critical current densities (5 MA cm−2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process., Authors acknowledge EU for ULTRASUPERTAPE ERC-2014-ADG-669504; COACHSUPENERGY MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R from MINECO; SuMaTe RTI2018-095853-B-C21 and RTI2018-095853-B-C22 from MICINN and co-financing by the European Regional Development Fund; 2017-SGR 1519 from Generalitat de Catalunya; and EU COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors thank Dr. Cornelia Pop, Dr. Bohores Villarejo, Dr. Bernat Mundet, and Dr Anna Palau for contributions at the initial stages of the project. We thank Diana García, Lavinia Saltarelli, Adria Pacheco, Dr. Max Sieger, and Dr. Albert Queralto for help in the feasibility study and preliminary results on thick films and coated conductors. Authors acknowledge support from SuNAM Co Ltd. for providing the buffered metallic substrates for the initial tests on coated conductors. We also acknowledge the Scientific Services at ICMAB, ICTS of IMB-CNM-CSIC, ICN2 Electron Microscopy Division and LMA-INA from Aragon, and SOLEIL Synchrotron for granting beamtime for XRD experiments and the DiffAbs beamline personnel for help. L.S. and J.J. also acknowledge their FPU-MINECO PhD grant, S.R. and N.C. thank University of Girona and Generalitat de Catalunya fort their PhD FI grant, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pyrolysis study of solution-derived superconducting YBa2Cu3O7 films: disentangling the physico-chemical transformations

  • Villarejo, Bohores
  • Pop, Cornelia
  • Ricart, Susagna
  • Mundet, Bernat
  • Palau, Anna
  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • Puig Molina, Teresa
  • Obradors, Xavier
Chemical solution deposition (CSD) of epitaxial YBa2Cu3O7 (YBCO) films is a high throughput, cost-effective approach to grow high critical current superconducting conductors for power applications. Achieving high critical currents requires to grow epitaxial films with large thicknesses and this is still an open issue in CSD. Metalorganic precursor solution deposition can be tailored to achieve high film thicknesses, however, the pyrolysis step may heavily compromise the film quality due to the in-plane stress generated by a strong film shrinkage. Here, we disclose the complex relationship existing during the pyrolysis process between the physico-chemical transformations and the microstructure of the films. A low-fluorine trifluoroacetate (TFA) and propionate(prop), route to YBCO films with a final thicknesses in the range of 700 – 800 nm was studied to understand the phenomena. Morphological analysis by in-situ optical microscopy video imaging under specific heating rates allowed to identify the thermokinetic conditions leading to permanent or reversible wrinkling and crack formation. The origin of the microstructural transformations during the pyrolysis of thick films has been disentangled through parallel in-situ analyses of the chemical, thermal and mechanical properties, together with film thickness measurements. A key finding has been the identification of an intermediate liquid phase relieving the compressive stress responsible of wrinkling. Disclosing the origin of the physico - chemical transformations opens the path towards defining optimized pyrolysis processing conditions for high quality single deposition of CSD films., Authors acknowledge the EUROTAPES project (EU-FP7 NMP-LA2012-280432), COACHSUPENERGY (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R) and SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22) from MINECO (co-financed by the European Regional Development Fund), 2017-SGR 753 from Generalitat de Catalunya, and COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence award Severo Ochoa SEV-2015-0496. Authors acknowledge the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. We thank CNM-IMB for the use of their FIB services., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Elucidation of the decomposition reactions of low-fluorine YBa2Cu3O7-x precursors during film pyrolysis

  • Piperno, Laura
  • Rasi, Silvia
  • Santis, S. De
  • Santoni, A.
  • Mancini, A.
  • Angrisani Armenio, A.
  • Pinto, V.
  • Farjas, Jordi
  • Sotgiu, Giovanni
  • Celentano, Giuseppe
Chemical solution deposition methods such as low-fluorine metal organic decomposition, are nowadays widely employed in the production of YBa2Cu3O7-x superconducting films. The investigation of the chemical reactions that convert the organic precursors into the pyrolysis product is essential for the optimization of the pyrolysis step, and, ultimately, for the comprehension of the growth process. In this work, a detailed analysis of the single-salt precursors, of the ternary precursor solution and its thermal decomposition was carried out through infrared spectroscopy (FITR), thermogravimetric analysis (TGA), evolved gas analysis (EGA), X-Ray diffraction (XRD), coupled with quench experiments, and X-Ray photoelectron spectroscopy (XPS). The combination of these techniques led to the identification of the precursors and the proposal of a reaction path for pyrolysis. More in detail, a copper/ammonia coordination compound was identified and it is the first to decompose at low temperatures via a mixed path of hydrolysis and oxidation to produce copper oxide. The decomposition of the other two precursors is superimposed at higher temperatures and it yields a mixture of BaF2, YF3 and Ba1-xYxF2+x., This work has been carried out within the framework of theEUROfusion Consortium and has received funding from the EURATOM programme 2014–2018 and 2019-2020 under grant agreement N° 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This work was also supported by Ministerio de Ciencia, Innovación y Universidades (grant number RTI2018-095853-B-C22), by the Center of Excellence Severo Ochoa (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-1519) and the Universitat de Girona (UdG, contract number MPCUdG2016/059)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Relevance of the Formation of Intermediate Non-Equilibrium Phases in YBa2Cu3O7-x Film Growth by Transient Liquid-Assisted Growth

  • Rasi, Silvia
  • Soler, Laia
  • Jareño Cerulla, Julia
  • Banchewski, Juri
  • Guzmán, Roger
  • Mocuta, Cristian
  • Kreuzer, Martin
  • Ricart, Susagna
  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid-assisted growth (TLAG) is a non-equilibrium ultrafast method to grow YBa2Cu3O7–x (YBCO) superconducting films at up to 100 nm/s using chemical solution deposition. In this work, we study the formation of non-equilibrium crystalline intermediate phases prior to the growth of YBCO through TLAG. We analyze the thermal decomposition and microstructural evolution of a propionate-based fluorine-free solution used as precursor to YBCO epitaxial films. Thermal analyses (TGA, DSC), coupled with techniques to monitor the volatiles (TG-IR), were applied in situ during film pyrolysis in humid O2, while the thermal evolution of the solid residue was characterized by infrared spectroscopy and X-ray diffraction, both ex situ and in situ in synchrotron radiation sources, and by scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) cross-sectional analysis. Unexpected effects, observed during the decomposition of the ternary solution, are the formation of intermediate non-equilibrium phases: Cu2O or Cu(0) and monoclinic BaCO3. We emphasize that working with anhydrous solutions and anhydrous deposition conditions promotes the formation of the expected equilibrium phases. Finally, in situ X-ray diffraction permits monitoring the influence of the non-equilibrium monoclinic BaCO3 phase on the formation of binary oxide phases, precursors of TLAG YBCO film growth. Understanding the evolution of non-equilibrium phases is shown to be fundamental for the control of the final YBCO film’s microstructure and performance, since the latter are strongly affected by the film’s thermal history after solution deposition., This work was funded by Ministerio de Ciencia, Innovation y Universidades (RTI2018-095853-B-C21 and RTI2018-095853-B-C22) cofinanced by the European Regional Development Fund, and the EU Ultrasupertape project (ERC ADG-2014-669504). We also acknowledge the Center of Excellence Severo Ochoa (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-1519) and the COST -action NANOCOHYBRI (CA16218). In situ FTIR experiments were performed at the MIRAS beamline of the ALBA Synchrotron with the collaboration of ALBA staff. We also thank the DiffAbs beamline at SOLEIL Synchrotron facility and the beamline staff support for the in situ XRD experiments. We thank the ICMAB, INA-Zaragoza and UdG scientific services and technical staff for the support on the experiments. S.R. thanks the Universitat de Girona (UdG) for the IFUdG grant. L.S. and J.J. also acknowledge their FPU-MINECO PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Performance of Superconducting YBa2Cu3O7 Thick Films Prepared by Single-Deposition Inkjet Printing

  • Villarejo, Bohores
  • Pino, Flavio
  • Pop, Cornelia
  • Ricart, Susagna
  • Vallés, Ferran
  • Mundet, Bernat
  • Palau, Anna
  • Roura, Pere
  • Farjas, Jordi
  • Chamorro, Natalia
  • Yáñez, Ramón
  • Granados, Xavier
  • Puig Molina, Teresa
  • Obradors, Xavier
Inkjet printing (IJP) is a very appealing cost-effective deposition technique to achieve large-area solution-derived functional films. For many applications, it is very challenging to increase the film thickness in order to achieve competitive performance, for instance, high critical currents in superconducting films. In this paper, the preparation of superconducting YBa2Cu3O7 thick films (∼1.1 μm) using a single deposition is reported. Specific rules for ink design, deposition protocols, and pyrolysis processes are provided. The most important aspect is to formulate an ink with a solvent having a high boiling point that keeps the whole film wet during deposition to avoid liquid movement due to coffee-ring effects. An additional success has been to modify the ink with a photocurable polyacrylic ester varnish which after polymerization with a UV LED lamp helps keep homogeneous thickness. This varnish also helped avoid the generation of film instabilities (wrinkling or cracking) during pyrolysis. Homogeneous pyrolyzed thick films are transformed into epitaxial thick films with high critical currents. The IJP process is shown to be valid to prepare nanocomposite films using colloidal inks including pre-prepared BaZrO3 nanoparticles. The nanocomposite thick films display enhanced vortex pinning, thus keeping high critical currents under high magnetic fields., The authors acknowledge the EUROTAPES project (EU-FP7 NMP-LA-2012-280432), COACHSUPENERGY (MAT2014- 51778-C2-1-R and MAT2014-51778-C2-2-R), SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) cofinanced by the European Regional Development Fund and SUPERINKS (RTC-2015-3840-S) from MINECO (cofinanced by the European Regional Development Fund), 2017-SGR 753 from Generalitat de Catalunya, and COST Action NANOCOHYBRI (CA16218). ICMAB authors acknowledge the Center of Excellence awards Severo Ochoa SEV2015-0496 and CEX2019-000917-S. The authors acknowledge the Scientific Services at ICMAB, ICN2 Electron Microscopy Division, and LMA-INA from Aragon. They also acknowledge KAO Chimigraf for providing varnishes and Bruker HTS for providing metallic substrates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Normal zone propagation in various REBCO tape architectures

  • Lacroix, Christian
  • Giguère, Jaël
  • Bergeron Hartman, Simon Mathieu
  • Ben Saad, Haïfa
  • Martin, Anthony
  • Leduc, Thomas
  • Gendron-Paul, Maxime
  • Bellil, Zakaria
  • Fournier-Lupien, Jean-Hughes
  • Moret, Lucile
  • Barusco, Pedro
  • Granados, Xavier
  • Obradors, Xavier
  • Pekarčíková, Marcela
  • Gömöry, Fedor
  • Grosse, Veit
  • Bauer, Markus
  • Sirois, Frédéric
The normal zone propagation velocity (NZPV) of three families of REBCO tape architectures designed for superconducting fault current limiters and to be used in high voltage direct current transmission systems has been measured experimentally in liquid nitrogen at atmospheric pressure. The measured NZPVs span more than three orders of magnitude depending on the tape architectures. Numerical simulations based on finite elements allow us to reproduce the experiments well. The dynamic current transfer length (CTL) extracted from the numerical simulations was found to be the dominating characteristic length determining the NZPV instead of the thermal diffusion length. We therefore propose a simple analytical model, whose key parameters are the dynamic CTL, the heat capacity and the resistive losses in the metallic layers, to calculate the NZPV., The authors acknowledge the funding of this research by FASTGRID Project (EU-H2020, 721019), the Projects COACHSUPENERGY (MAT2014-51778-C2-1-R), SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) from the Spanish Ministry of Economy and Competitiveness which were cofunded by the European Regional Development Fund, the Project 2017-SGR 753 from Generalitat de Catalunya and the COST Action NANOCOHYBRI (CA16218). Polytechnique Montréal authors also acknowledge NSERC (Canada), FRQNT (Québec), the RQMP infrastructure and CMC microsystems for financial support. ICMAB authors also acknowledge the Center of Excellence awards Severo Ochoa SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical Solution Deposition of Insulating Yttria Nanolayers as Current Flow Diverter in Superconducting GdBa2Cu3O7-δ Coated Conductors

  • Barusco, Pedro
  • Granados, Xavier
  • Saltarelli, Lavinia
  • Fournier-Lupien, Jean-Hughes
  • Lacroix, Christian
  • Saad, Haifa Ben
  • Sirois, Frédéric
  • Vlad, Valentina Roxana
  • Calleja, Albert
  • Grosse, Veit
  • Puig Molina, Teresa
  • Obradors, Xavier
The primary benefit of a metallic stabilization/shunt in high temperature superconductor (HTS) coated conductors (CCs) is to prevent joule heating damage by providing an alternative path for the current flow during the HTS normal state transition (i.e., quench). However, the shunt presence in combination with unavoidable fluctuations in the critical current (I c) of the HTS film can develop a localized quench along the CC's length if the operational current is kept close to I c. This scenario, also known as the hot-spot regime, can lead to the rupture of the CC if the local quench does not propagate fast enough. The current flow diverter (CFD) is the CC architecture concept that has proven to increase the conductor's robustness against a hot-spot regime by simply boosting the quench velocity in the CC, which avoids the shunt compromise in some applications. This work investigates a practical manufacturing route for incorporating the CFD architecture in a reel-to-reel system via the preparation of yttrium oxide (Y2O3) as an insulating thin nanolayer (∼100 nm) on top of a GdBa2Cu3O7 (GdBCO) superconductor. Chemical solution deposition (CSD) using ink jet printing (IJP) is shown to be a suitable manufacturing approach. Two sequences of the experimental steps have been investigated, where oxygenation of the GdBCO layer is performed after or before the solution deposition and the Y2O3 nanolayer thermal treatment formation step. A correlated analysis of the microstructure, in situ oxygenation kinetics, and superconducting properties of the Ag/Y2O3/GdBCO trilayer processed under different conditions shows that a new customized functional CC can be prepared. The successful achievement of the CFD effect in the case of the preoxygenated customized CC was confirmed by measuring the current transfer length, thus demonstrating the effectiveness of the CSD-IJP as a processing method., We acknowledge the funding of this research by FASTGRID Project (EU-H2020, 721019); the Projects COACHSUPENERGY (MAT2014-51778-C2-1-R) and SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) from the Spanish Ministry of Economy and Competitiveness, which were cofunded by the European Regional Development Fund; and the Project 2017-SGR 753 from Generalitat de Catalunya and the COST Action NANOCOHYBRI (CA16218). ICMAB authors also acknowledge the Center of Excellence awards Severo Ochoa SEV-2015-0496 and CEX2019-000917-S, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical and Microstructural Nanoscale Homogeneity in Superconducting YBa2Cu3O7-x Films Derived from Metal-Propionate Fluorine-free Solutions

  • Saltarelli, Lavinia
  • Gupta, Kapil
  • Rasi, Silvia
  • Kethamkuzhi, Aiswarya
  • Queraltó, Albert
  • García Franco, Diana
  • Gutierrez, Joffre
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
Research involved in developing alternative energy sources has become a necessity to face global warming. In this context, superconductivity is an appealing solution to enhance clean electrical energy provided that lower production costs can be attained. By implementation of chemical solution deposition techniques and high-throughput growth methods, low-cost nanostructured epitaxial cuprate superconductors are timely candidates. Here, we present a versatile and tunable solution method suitable for the preparation of high-performance epitaxial cuprate superconducting films. Disregarding the renowned trifluoroacetate route, we center our focus on the transient liquid-assisted growth (TLAG) that meets the requirement of being a greener chemical process together with ultrafast growth rates beyond 100 nm/s. We developed a facile, fast, and cost-effective method, starting from the synthesis of metal-propionate powders of Y, Ba, and Cu of high purity and high yields, being the precursors of the fluorine-free solutions, which enable the chemical and microstructural nanoscale homogeneity of YBa2Cu3O7-x (YBCO) precursor films. These solutions present endured stability and enable precise tunability of the composition, concentration, porosity, and film thickness. Homogeneous precursor films up to thicknesses of 2.7 μm through eight layer multidepositions are demonstrated, thus establishing the correct basis for epitaxial growth using the fast kinetics of the TLAG process. YBCO films of 500 nm thickness with a critical current density of 2.6 MA/cm2 at 77 K were obtained, showing the correlation of precursor film homogeneity to the final YBCO physical properties., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964), and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Programme for Centres of Excellence in FUNFUTURE (CEX2019-000917-S), SUMATE projects (RTI2018-095853-B-C21, RTI2018-095853-B-C22 co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE), and SUPERENERTECH projects (PID2021-127297OB-C21 and PID2021-127297OB-C22). The authors also thank support from the Catalan Government with 2017-SGR-1519 and Catalan energy network XRE4S (2018 XARDI 00002). L.S., D.G., and A.K. acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.S. and D.G. would like to thank the UAB PhD program in Materials Science, and A.K. would like to thank the UAB PhD program in Physics. A.Q. would like to thank the Spanish Ministry of Science, Innovation and Universities [“Juan de la Cierva” postdoctoral fellowship (grant no. IJC2018-035034-I)]. The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. The content of this paper is the object of a European patent application no. EP22382741.1 filed on 29/07/2022., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBa2Cu3O7-x Superconducting Films

  • Rasi, Silvia
  • Queraltó, Albert
  • Banchewski, Juri
  • Saltarelli, Lavinia
  • García Franco, Diana
  • Pacheco, Adrià
  • Gupta, Kapil
  • Kethamkuzhi, Aiswarya
  • Soler, Laia
  • Jareño Cerulla, Julia
  • Ricart, Susagna
  • Farjas, Jordi
  • Roura Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBa2 Cu3 O7- x (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm-2 at 77 K and growth rates between 100-2000 nm s-1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods., The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964) and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from Spanish Ministry of Science and Innovation with PID2021-127297OB-C21 and PID2021-127297OB-C22, and from Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S), and from the Spanish Ministry of Economy and Competitiveness with the SUMATE project (RTI2018-095853-B-C21, RTI2018-095853-B-C22, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE). They also thank the Catalan Government (2017-SGR-1519) and the Catalan energy network XRE4S (2018 XARDI 00002) for their support. L.S., D.G., and A.K. acknowledge financial support from Spanish Ministry of Science, Innovation and Universities through the FPI grant PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.So. and J.J. acknowledge financial support from Spanish Ministry for the FPU grants. S.R. thanks the Universitat de Girona for IFUdG grant and A.Q. thanks the Spanish Ministry of Science, Innovation and Universities (“Juan de la Cierva” postdoctoral fellowship [Grant no. IJC2018-035034-I]). The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at University of Zaragoza. The authors also acknowledge SOLEIL Synchrotron for provision of synchrotron radiation facilities and are grateful for assistance while using the DiffAbs beamline., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Measuring the viscosity of films by thermomechanical analysis: application to metal organic precursor films of functional oxides

  • Roura Grabulosa, Pere
  • Farjas, Jordi
  • López Olmedo, Joan Pere
  • Villarejo, Bohores
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
We have developed a new method to measure the viscosity of micrometric films by thermomechanical analysis with a hemispherical probe of millimetric diameter. The loading curve (displacement vs. time) recorded as the probe tip crosses the whole film at constant load until it touches the substrate is fitted to a theoretical curve shape that has been obtained after solving the problem of liquid flow under the probe tip. The method has been validated by measuring the viscosity of rosin films. It has been applied to analyze the thermal evolution of unstable liquid films that appear on Ba propionate, Ce(III) propionate and a low-fluorine precursor film of YBa2Cu3O6+x. During pyrolysis of the last two films, viscosity first diminishes due to heating and then it increases as solid oxide particles are formed inside the liquid., This work has been partially funded by the Spanish Programa Nacional de Materiales through projects MAT2014-51778-C2-1-R, MAT2014-51778-C2-2-R, RTI2018-095853-B-C21, RTI2018-095853-B-C22, PID2021-127297OB-C21 and PID2021-127297OB-C21, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE and also by the Generalitat de Catalunya contract No. 2017-SGR001519 and by the Universitat de Girona contract No. MPCUdG2016/059. We are indebted to the Serveis Generals de Recerca (SGR) of the University of Girona for the use of the thermal analysis facilities. We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S. We are grateful to Aleix Prat for doing TMA preliminary experiments., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A sulfurization method for creating the buffer-layers current flow diverter architecture in REBa2Cu3O7 coated conductors

  • Barusco, Pedro
  • Giguère, Jael
  • Lacroix, Christian
  • Sirois, Frédéric
  • Granados, Xavier
  • Puig Molina, Teresa
  • Obradors, Xavier
The current flow diverter (CFD) is a known concept that has proven to effectively reduce the probability of destructive hot spots in REBa2Cu3O7 (REBCO; RE = rare earth) coated conductors (CCs) by boosting the normal zone propagation velocity. However, the implementation of the CFD concept requires additional steps in a fabrication process that is already complex and has struggled to find a simple reel-to-reel fabrication method. This work reports on the details of a fabrication route for the buffer-layers-CFD (bCFD) architecture using a solid-vapor silver sulfurization technique to tune the geometry of the metal stabilizer in the high-temperature superconductor tape. The analysis of the microstructure and superconducting properties of the Ag2S/Ag/GdBCO trilayer processed under different conditions shows how we achieved a new customized functional CC with the bCFD architecture. In DC limitation experiments, this bCFD-sulfide architecture allowed to generate an electric potential much faster than the conventional architecture (60 V s−1 vs. 1.2 V s−1) thanks to the strong enhancement of the NPZV., The authors acknowledge the funding of this research by the FASTGRID project (EU-H2020, 721019), the projects COACHSUPENERGY (MAT2014-51778-C2-1-R), SUMATE (RTI2018-095853-BC21 and RTI2018-095853-B-C22) from the Spanish Ministry of Economy and Competitiveness which were co-funded by the European Regional Development Fund, the project 2017-SGR 753 from Generalitat de Catalunya and the COST Action NANOCOHYBRI (CA16218). ICMAB authors also acknowledge the Center of Excellence awards Severo Ochoa SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Progress in superconducting REBa2Cu3O7 (RE = rare earth) coated conductors derived from fluorinated solutions

  • Obradors, Xavier
  • Puig Molina, Teresa
  • Ricart, Susagna
  • Palau, Anna
  • Coll, Mariona
  • Gutierrez Royo, Joffre 
  • Farjas, Jordi
  • Bartolomé, Elena
In this work, we review recent progress achieved in the use of chemical solution deposition (CSD) based on fluorinated metalorganic precursors to grow superconducting REBa2Cu3O7 (REBCO) films and coated conductors (CCs). We examine, first of all, the advances in optimizing the steps related to the solutions preparation, deposition and pyrolysis based on novel low-fluorine metalorganic solutions. We show that a new type of multifunctional colloidal solutions including preformed nanoparticles (NPs), can be used to introduce artificial pinning centers (APCs). We analyze how to disentangle the complex physico-chemical transformations occurring during the pyrolysis with the purpose of maximizing the film thicknesses. Understanding the nucleation and growth mechanisms is shown to be critical to achieve a fine tuning of the final microstructure, either using the spontaneous segregation or the colloidal solution approaches, and make industrially scalable this process. Advanced nanostructural studies have deeply modified our understanding of the defect structure and its genealogy. It is remarkable the key role played by the high concentration of randomly distributed and oriented BaMO3 (M = Zr, Hf) NPs which enhance the concentration of APCs, such as stacking faults and the associated partial dislocations. Correlating the defect structure with the critical current density Jc (H,T,θ) allows to reach a tight control of the vortex pinning properties and to devise a general scheme of the vortex pinning landscape in the whole H-T phase diagram. We also refer to the outstanding recent achievements in enhancing the vortex pinning strength by shifting the carrier concentration in REBCO films towards the overdoped state, where the pinning energy is maximum and so, record values of critical current densities are achieved. This confirms the performance competitiveness of nanocomposite CCs prepared through the CSD route. We conclude with a short summary of the progress in scaling the CC manufacturing using fluorinated solutions., Authors acknowledge the European Union Research Council for EUROTAPES (EU-FP7-NMP-LA-2012-280432) and FASTGRID (EU-H2020, 721019) projects and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144); the European Research Council for ULTRASUPERTAPE (ERC-2014-ADG-669504), IMPACT (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998) projects. Also acknowledged is the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for COACHSUPENERGY project (MAT2014-51778-C2-1-R and MAT2014-51778-C2-2-R), SuMaTe (RTI2018-095853-B-C21 and RTI2018-095853-B-C22), SUPERENERTECH (PID2021-127297OB-C21, PID2021-127297OB-C22) and PID2022-138492NB-I00, FUNMAT and FUNFUTURE ICMAB 'Severo Ochoa' Program for Centers of Excellence in R&D (SEV-2015-0496, CEX2019-000917-S) and HTS-JOINTS (PDC2022-133208-I00). They also thank the PTI+ TransEner CSIC program for Spanish NGEU (Regulation (EU) 2020/2094) and Catalan Government for 2017 SGR 1519 and 2021 SGR 00440 and that of Aragon for RASMIA (E12-23R)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Enhanced Normal Zone Propagation Velocity in REBCO Coated Conductors Using an Intermetallic Stabilizer Coating

  • Barusco, Pedro
  • Ben-Saad, Hamda
  • Horn-Bourque, D.
  • Lacroix, Christian
  • Sirois, Frédéric
  • Puig Molina, Teresa
  • Gutierrez Royo, Joffre 
  • Granados, Xavier
  • Obradors, Xavier
The Current Flow Diverter (CFD) is an established concept that has proven to effectively reduce the probability of destructive hot spots by boosting the normal zone propagation velocity (NZPV) in commercial REBa2Cu3O7 (REBCO; RE = Rare Earth) coated conductors (CC). However, incorporating the CFD concept requires finding a scalable method that is also compatible with the already established R2R fabrication process used by CC manufacturers. This study presents a new simple & cost-effective proof-of-concept technique capable of recreating the CFD architecture in commercial CCs coated with silver. The technique is based on promoting a locally controlled thin film diffusion reaction between the silver stabilizer and pure indium. Due to fast diffusion in the Ag-In system, stable Intermetallic Compounds (IMC) are formed throughout the whole thickness of the silver layer reaching the REBCO interface. The presence of Ag-In IMC in the interface safely increases the interfacial resistance (Ω-cm2) by orders of magnitude, thus allowing to safely form the CFD interlayer. Silver-coated tape samples altered using this CFD-IMC have shown an NZPV increase of 5-8x when compared with pristine samples., This work was supported in part by the FASTGRID Project under Grant EUH2020-721019, in part by the Projects SUPERENERTECH under Grant PID2021-127297OB-C21, in part by Spanish Ministry of Economy and Competitiveness which were co-funded by the European Regional Development Fund throughSUMATEunderGrantsRTI2018-095853-BC21 and RTI2018-095853-B-C22, in part by the MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR through SUPERPOWER Project under Grant TED2021-130004B-I00, in part by the Generalitat de Catalunya under Grant 2017-SGR 753, and in part by the COST Action NANOCOHYBRI under Grant CA16218. The work of P. Barusco, T. Puig, X. Granados, J. Guriérrez and X. Obradors was supported by the Center of Excellence Awards Severo Ochoa under Grants SEV-2015-0496 and CEX2019-000917-S., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of triethanolamine on the pyrolysis of metal-propionate-based solutions

  • Rasi, Silvia
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
  • Roura Grabulosa, Pere
  • Farjas Silva, Jordi
The effect of triethanolamine (TEA) on single‐salt propionate‐based solutions used to prepare YBa2Cu3O7‐∂ (YBCO) has been studied through thermal analysis, for film and powder samples. Decomposition has been followed by thermogravimetry (TG) coupled to differential scanning calorimetry (DSC) and evolved gas analysis (EGA‐MS and TG‐FTIR), while chemical characterization has been carried out by FTIR, XRD and EA. The addition of TEA has little effect on the decomposition of Ba‐Prop‐Ac. Conversely, the thermal behavior of CuProp2 and YProp3 film with TEA becomes more gradual and less affected by a change of atmosphere than the TEA‐free case. This is explained by the fact that the decomposition mechanism is driven by the formation of an ester between the propionate groups and the TEA's OH groups, which is promoted by inert atmospheres and temperatures above 200°C. Just as the single salt precursors, the Ba and Y films show residual organic material at 500°C in thick films decomposed in O2, This work was funded by Ministerio de Ciencia, Innovación y Universidades (grant numbers RTI2018‐095853‐B‐C21 and RTI2018‐095853‐B‐C22), by the Center of Excellence Severo Ochoa (SEV‐2015‐0496), the Generalitat of Catalunya (2017‐SGR‐1519). It was also supported by the European Union through the projects Eurotapes (EU‐FP7 NMP‐LA‐2012‐280432) and Ultrasupertape (ERC ADG‐2014‐669504). S.R. wishes to thank the University of Girona for the IF‐ UdG PhD grant
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Chemical and Microstructural Nanoscale Homogeneity in Superconducting YBa2Cu3O7-x Films Derived from Metal-Propionate Fluorine-free Solutions

  • Saltarelli, Lavinia
  • Gupta, Kapil
  • Rasi, Silvia
  • Kethamkuzhi, Aiswarya
  • Queraltó, Albert
  • Garcia, Diana
  • Gutierrez, Joffre
  • Farjas Silva, Jordi
  • Roura Grabulosa, Pere
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
Research involved in developing alternative energy sources has become a necessity to face global warming. In this context, superconductivity is an appealing solution to enhance clean electrical energy provided that lower production costs can be attained. By implementation of chemical solution deposition techniques and high-throughput growth methods, low-cost nanostructured epitaxial cuprate superconductors are timely candidates. Here, we present a versatile and tunable solution method suitable for the preparation of high-performance epitaxial cuprate superconducting films. Disregarding the renowned trifluoroacetate route, we center our focus on the transient liquid-assisted growth (TLAG) that meets the requirement of being a greener chemical process together with ultrafast growth rates beyond 100 nm/s. We developed a facile, fast, and cost-effective method, starting from the synthesis of metal-propionate powders of Y, Ba, and Cu of high purity and high yields, being the precursors of the fluorine-free solutions, which enable the chemical and microstructural nanoscale homogeneity of YBa2Cu3O7-x (YBCO) precursor films. These solutions present endured stability and enable precise tunability of the composition, concentration, porosity, and film thickness. Homogeneous precursor films up to thicknesses of 2.7 μm through eight layer multidepositions are demonstrated, thus establishing the correct basis for epitaxial growth using the fast kinetics of the TLAG process. YBCO films of 500 nm thickness with a critical current density of 2.6 MA/cm2 at 77 K were obtained, showing the correlation of precursor film homogeneity to the final YBCO physical properties, The authors acknowledge the European Research Council for the ULTRASUPERTAPE project (ERC-2014-ADG-669504), IMPACT project (ERC-2019-PoC-874964), and EU COST action for CA16218 (NANOCOHYBRI). The authors also acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the “Severo Ochoa” Programme for Centres of Excellence in FUNFUTURE (CEX2019-000917-S), SUMATE projects (RTI2018-095853-B-C21, RTI2018-095853-B-C22 co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE), and SUPERENERTECH projects (PID2021-127297OB-C21 and PID2021-127297OB-C22). The authors also thank support from the Catalan Government with 2017-SGR-1519 and Catalan energy network XRE4S (2018 XARDI 00002). L.S., D.G., and A.K. acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through the FPI grants PRE2019-090621, PRE2018-084537, and PRE2020-091817, respectively. L.S. and D.G. would like to thank the UAB PhD program in Materials Science, and A.K. would like to thank the UAB PhD program in Physics. A.Q. would like to thank the Spanish Ministry of Science, Innovation and Universities [“Juan de la Cierva” postdoctoral fellowship (grant no. IJC2018-035034-I)]. The authors thank the Scientific Services at ICMAB and ICN2 Electron Microscopy Division. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas” at the University of Zaragoza. The content of this paper is the object of a European patent application no. EP22382741.1 filed on 29/07/2022
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Use of thermal analysis to predict the conditions for thermal explosion to occur: application to a Ce triethanolamine complex

  • Zghal, Imen
  • Farjas Silva, Jordi
  • Camps Soler, Jaume
  • Sánchez Rodríguez, Daniel
  • Dammak, Mohamed
  • Roura Grabulosa, Pere
This contribution explores the capabilities of combined thermal analysis methods to predict the ignition condition for a thermal runaway event to occur in a system heated at a constant rate. In particular, for a Ce triethanolamine complex, thermogravimetry has been used to determine the kinetic parameters, while enthalpy, thermal conductivity and thermal capacity have been measured by means of DSC. Once these parameters are known, it is possible to predict the critical mass for different heating rates and crucible sizes. Besides, thermogravimetry allowed us to assess if thermal runaway occurred as well as to monitor its evolution. Good agreement between the predicted and the experimental critical masses has been observed, This work was funded by Ministerio de Ciencia, Innovación y Universidades (grant number RTI2018-095853-B-C22) and by the Generalitat of Catalunya (2017-SGR-1519)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Thermal decomposition of cerium triethanolamine complexes

  • Zghal, Imen
  • Farjas Silva, Jordi
  • Camps Soler, Jaume
  • Dammak, Mohamed
  • Roura Grabulosa, Pere
Aquesta és una versió no revisada per experts de l'article publicat per Elsevier a 'Thermochimica Acta', publicat en línia el gener de 2020 i disponible a https://doi.org/10.1016/j.tca.2019.178430, Thermal decomposition of cerium triethanolamine complexes to cerium oxide, CeO2, in inert and oxidative atmospheres is investigated by thermogravimetry combined with infrared evolved gas analysis and the main volatiles formed during thermal decomposition are identified. Intermediate and final products are characterized by infrared spectroscopy, X-Ray diffraction and elemental analysis. Several overlapping steps occurring along the decomposition path are identified and plausible reaction pathways are presented. It will be shown that, independent of the atmosphere, decomposition starts around 200 °C but the endset temperature depends on the composition of the gas, i.e., the more inert the atmosphere, the higher the endset temperature. Finally, the effect the temperature and amount of triethanolamine used have during compound synthesis is discussed, This work was funded by Ministerio de Ciencia, Innovación y Universidades (grant number RTI2018-095853-B-C22), by the Generalitat of Catalunya (2017-SGR-1519) and by the Universitat de Girona (UdG, contract number MPCUdG2016/059)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Relevance of the Formation of Intermediate Non-Equilibrium Phases in YBa2Cu3O7-x Film Growth by Transient Liquid-Assisted Growth

  • Rasi, Silvia
  • Soler Bru, Laia
  • Jareño, Julia
  • Banchewski, Juri
  • Guzman, Roger
  • Mocuta, Cristian
  • Kreuzer, Martin
  • Ricart, Susagna
  • Roura Grabulosa, Pere
  • Farjas Silva, Jordi
  • Obradors, Xavier
  • Puig Molina, Teresa
Transient liquid-assisted growth (TLAG) is a nonequilibrium ultrafast method to grow YBa2Cu3O7−x (YBCO) superconducting films at up to 100 nm/s using chemical solution deposition. In this work, we study the formation of non-equilibrium crystalline intermediate phases prior to the growth of YBCO through TLAG. We analyze the thermal decomposition and microstructural evolution of a propionate-based fluorine-free solution used as precursor to YBCO epitaxial films. Thermal analyses (TGA, DSC), coupled with techniques to monitor the volatiles (TG-IR), were applied in situ during film pyrolysis in humid O2, while the thermal evolution of the solid residue was characterized by infrared spectroscopy and X-ray diffraction, both ex situ and in situ in synchrotron radiation sources, and by scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) cross-sectional analysis. Unexpected effects, observed during the decomposition of the ternary solution, are the formation of intermediate non-equilibrium phases: Cu2O or Cu(0) and monoclinic BaCO3. We emphasize that working with anhydrous solutions and anhydrous deposition conditions promotes the formation of the expected equilibrium phases. Finally, in situ X-ray diffraction permits monitoring the influence of the non-equilibrium monoclinic BaCO3 phase on the formation of binary oxide phases, precursors of TLAG YBCO film growth. Understanding the evolution of non-equilibrium phases is shown to be fundamental for the control of the final YBCO film's microstructure and performance, since the latter are strongly affected by the film's thermal history after solution deposition, This work was funded by Ministerio de Ciencia, Innovación y Universidades (RTI2018- 095853-B-C21 and RTI2018-095853-B-C22) co-financed by the European Regional Development Fund, and the EU Ultrasupertape project (ERC ADG-2014-669504). We also acknowledge the Center of Excellence Severo Ochoa (SEV-2015-0496), the Generalitat de Catalunya (2017-SGR-1519) and the COST-action NANOCOHYBRI (CA16218)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Measuring the viscosity of films by thermomechanical analysis: application to metal organic precursor films of functional oxides

  • Roura Grabulosa, Pere
  • Farjas Silva, Jordi
  • López-Olmedo, Joan Pere
  • Villarejo, Bohores
  • Ricart, Susagna
  • Obradors, Xavier
  • Puig Molina, Teresa
We have developed a new method to measure the viscosity of micrometric films by thermomechanical analysis with a hemispherical probe of millimetric diameter. The loading curve (displacement vs. time) recorded as the probe tip crosses the whole film at constant load until it touches the substrate is fitted to a theoretical curve shape that has been obtained after solving the problem of liquid flow under the probe tip. The method has been validated by measuring the viscosity of rosin films. It has been applied to analyze the thermal evolution of unstable liquid films that appear on Ba propionate, Ce(III) propionate and a low-fluorine precursor film of YBa2Cu3O6+x. During pyrolysis of the last two films, viscosity first diminishes due to heating and then it increases as solid oxide particles are formed inside the liquid, Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work has been partially funded by the Spanish Programa Nacional de Materiales through projects MAT2014-51778-C2-1-R, MAT2014-51778-C2-2-R, RTI2018-095853-BC21, RTI2018-095853-B-C22, PID2021-127297OB-C21 and PID2021-127297OB-C21, co-financed by the European Regional Development Fund, MCIU/AEI/FEDER, UE and also by the Generalitat de Catalunya contract No. 2017-SGR001519 and by the Universitat de Girona contract No. MPCUdG2016/059. We are indebted to the Serveis Generals de Recerca (SGR) of the University of Girona for the use of the thermal analysis facilities. We acknowledge fnancial support from the Spanish Ministry of Economy and Competitiveness through the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Using evolved gas analysis-mass spectrometry to characterize adsorption on a nanoparticle surface

  • Martínez-Esaín, Jordi|||0000-0002-8420-8559
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Roura, Pere|||0000-0003-4964-1362
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Ricart, Susana|||0000-0003-4196-2081
The surface chemistry of nanoparticles is the key factor to control and predict their interactions with molecules, ions, other particles, other materials, or substrates, determining key properties such as nanoparticle stability or biocompatibility. In consequence, the development of new techniques or modification of classical techniques to characterize nanoparticle surfaces is of utmost importance. Here, a classical analysis technique, thermally evolved gas analysis-mass spectrometry (EGA-MS), is employed to obtain an image of the nanoparticle-solvent interface, unraveling the molecules present on the surface. As the use of complementary techniques is urged, the validity of EGA-MS characterization is corroborated by comparison with a previously reported surface characterization method. Previous studies were based on several experimental techniques and MD simulations using YF nano/supraparticles and LaF nanoparticles as model systems. We demonstrate the applicability of this technique in two differently sized systems and two systems composed of the same ions on their surface but with a different inorganic core (e.g. LaF and YF nanoparticles). The results described in this paper agree well with our previous results combining experimental techniques and MD simulations. EGA-MS not only revealed the ions attached to the nanoparticle surface but also shed light on their coordination (e.g. citrate attached to one or two carboxylate moieties). Thus, we show that EGA-MS is a useful and efficient technique to characterize the surface chemistry of nanoparticles and to control and predict their final properties.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultrafast transient liquid assisted growth of high current density superconducting films

  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Banchewski, Juri|||0000-0002-6654-5527
  • Rasi, Silvia|||0000-0003-4935-3918
  • Chamorro, Natalia|||0000-0002-9531-1869
  • Guzmán Aluja, Roger|||0000-0002-5580-0043
  • Yáñez, Ramón|||0000-0002-2021-0924
  • Mocuta, C.|||0000-0001-5540-449X
  • Ricart, S.
  • Farjas Silva, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, P.
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The achievement of high growth rates in YBaCuO epitaxial high-temperature superconducting films has become strategic to enable high-throughput manufacturing of long length coated conductors for energy and large magnet applications. We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s -1) and high critical current densities (5 MA cm -2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. Additionally, using colloidal solutions, the growth process is extended towards fabrication of nanocomposite films for enhanced superconducting properties at high magnetic fields. Fast acquisition in situ synchrotron X-ray diffraction and high resolution scanning transmission electron microscopy (STEM) become crucial measurements in disentangling key aspects of the growth process. High throughput manufacturing of long length coated conductors requires fast epitaxial growth of high-temperature superconducting films. Here, Soler et al. report an ultrafast growth rates and high critical current densities of YBaCuO films using a transient liquid-assisted growth method.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Kinetic Control of Ultrafast Transient Liquid Assisted Growth of Solution-Derived YBaCuO-x Superconducting Films

  • Rasi, Silvia|||0000-0003-4935-3918
  • Queraltó, Albert
  • Banchewski, Juri|||0000-0002-6654-5527
  • Saltarelli, Lavinia|||0000-0001-7519-2981
  • Garcia, Diana
  • Pacheco Aceña, Adrià
  • Gupta, Kapil|||0000-0002-4826-6620
  • Kethamkuzhi, Aiswarya
  • Soler Bru, Laia|||0000-0003-1403-0406
  • Jareño Cerulla, Júlia
  • Ricart, Susagna
  • Farjas, Jordi|||0000-0002-4093-9843
  • Roura-Grabulosa, Pere
  • Mocuta, Cristian
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Transient liquid assisted growth (TLAG) is an ultrafast non-equilibrium growth process mainly governed by kinetic parameters, which are only accessible through fast in situ characterizations. In situ synchrotron X-ray diffraction (XRD) analysis and in situ electrical resistivity measurements are used to derive kinetic diagrams of YBaCuO (YBCO) superconducting films prepared via TLAG and to reveal the unique peculiarities of the process. In particular, diagrams for the phase evolution and the YBCO growth rates have been built for the two TLAG routes. It is shown that TLAG transient liquids can be obtained upon the melting of two barium cuprate phases (and not just one), differentiated by their copper oxidation state. This knowledge serves as a guide to determine the processing conditions to reach high performance films at high growth rates. With proper control of these kinetic parameters, films with critical current densities of 2-2.6 MA cm -2 at 77 K and growth rates between 100-2000 nm s -1 are reached. These growth rates are 1.5-3 orders of magnitude higher than those of conventional methods. Transient liquid assisted growth (TLAG) is an ultrafast, non-equilibrium growth process governed by kinetic parameters, accessible only through fast in situ characterizations. These methods are used to build kinetic diagrams of phase evolution and growth rate which are unique guides to reach the conditions for ultrafast growth (>1000 nm s - 1) and high-performance superconducting films by combining kinetic and thermodynamic parameters.