Skip to main content

Materiales y dispositivos electroquímicos avanzados para la producción verde y el almacenamiento de energía

RYC2021-033889-I

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprogram Subprograma Estatal de Incorporación
Call Ramón y Cajal
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring oxide nanoparticle exsolution in La0.5Ba0.5-yCo1-xFexO3-[delta]

  • Balcerzak, Daria
  • Norby, Truls
  • Strandbakke, Ragnar
  • Gazda, Maria
  • Wachowski, Sebastian L.
  • López-García, Andrés
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] We show that oxide nanoparticles (NPs) exsolve on La0.5Ba0.5-yCo1-xFexO3-¿ (x = 0-1, y = 0 or 0.01) in oxidizing conditions. The phenomenon occurs only in Co-containing materials and depends on pO2 and pH2O pressures. Under dry conditions, the smallest NPs average about 30 nm, with 200-300 NPs/mu m2 at pO2= 5 x 10-5 atm. For pO2= 1 atm, NP size increases to 100-200 nm, and population drops to a few to about 20 NPs/mu m2 depending on A-site nonstoichiometry and x. In humid conditions, the smallest NPs around 50 nm, with a peak of 100 NPs/mu m2 exsolve for pO2= 1. Transmission electron microscopy shows that exsolved NPs in La0.5Ba0.5-yCoO3-¿ are Ba-Orich. We propose defect chemistry models, indicating that exsolution is driven by oxidation reactions forming A-site vacancies, increasing exsolved material with higher pO2. We suggest that adsorbed water under humid conditions blocks nucleation sites, altering observed trends., Project FunKeyCat is supported by the National Science Centre, Poland, The Research Council of Norway (FunKeyCat 299736) , and the Spanish Government (PCI2019-103742, RYC2021-033889-I) under the M-ERA.NET 2, which has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no 685451. We thank the support of the Electronic Microscopy Service of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Defect-surface engineering of La-doped ceria for microwave-assisted hydrogen production

  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Navarrete Algaba, Laura
  • Santos, Joaquin
  • Catalán-Martínez, David
[EN] Hydrogen plays a pivotal role in decarbonizing the energy and chemical sectors, yet current production methods are limited by high temperatures and energy demands. Microwave-assisted thermochemical redox cycles offer a promising low-temperature, contactless alternative by coupling electromagnetic energy with reducible oxides. In this study, we explore La-doped ceria (Ce1-xLaxO2-delta) as a tunable platform to enhance microwave-driven hydrogen production. We demonstrate that introducing La3+ into the ceria lattice reduces the bandgap and increases dielectric permittivity, enabling Ce4+ to Ce3+ reduction at temperatures as low as 110 degrees C. Among the series, Ce0.9La0.1O1.95 exhibits optimal performance, balancing high ionic mobility and microwave absorption. Combined with tailored surface area, this composition achieves an unprecedented hydrogen production rate of 2.60 mL g-1 per cycle at temperatures below 400 degrees C. Correlations between dopant concentration, polarization behavior, and redox kinetics reveal the key role of band structure breakdown and defect formation in driving non-equilibrium reduction. Our findings uncover mechanistic insights into microwave-material interactions and establish design principles for next-generation redox materials. This approach provides a framework for scalable, electrified hydrogen production via electronic structure and defect engineering in oxide systems., Financial support by the Spanish Ministry of Science and Innovation and European Union (TED2021-132590B-C22, NextGenerationEU/PRTR, PID2022-139663OB-100, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, "Ramon y Cajal" Fellowship RYC2021-033889-I grants) and Vice-Rectorate for Research of the Universitat Politecnica de Valencia (PAID-06-24 grants). Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave-Driven Reduction Accelerates Oxygen Exchange in Perovskite Oxides

  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Santos-Blasco, Joaquín
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Gutiérrez Cano, José Daniel
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Navarrete, Laura
  • Catalán-Martínez, David
[EN] Microwave-assisted oxide reduction has emerged as a promising method to electrify chemical looping processes for renewable hydrogen production. Moreover, these thermochemical cycles can be used for thermochemical air separation, electrifying the O-2 generation by applying microwaves in the reduction step. This approach offers an alternative to conventional cryogenic air separation, producing pure streams of O-2 and N-2. The electrification by microwaves lowers the requirements for titanate perovskites (CaTi1-xMnxO3-delta), which typically demand high temperatures for thermochemical cycles. Microwave activation allows for a drastic reduction in the operation conditions of the reduction reaction, leading to unprecedentedly rapid absorption-desorption cycles (<3 min per cycle). For CaTi0.8Mn0.2O3-delta, we achieved a cycle-averaged O-2 production of 2.6 mL g(-1) min(-1) at 800 degrees C, surpassing conventional values of materials operating in the high-temperature regime. This method could significantly impact thermochemical air separation by enabling a faster oxygen absorption-desorption cycle at more moderate temperatures than those of conventionally heated processes., This study forms part of the MFA program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (CIPROM/2022/10). Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033 and "Ramon y Cajal" Fellowship RYC2021-033889-I) and the Universitat Politecnica de Valencia (UPV) is gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Physicochemical properties of La0.5Ba0.5Co1-xFexO3-o (0 &lt, = x &lt, = 1) as positrode for proton ceramic electrochemical cells

  • Wachowski, Sebastian L.
  • Szpunar, Iga
  • Pospiech, Joanna
  • Balcerzak, Daria
  • Mielewczyk-Gryn, Aleksandra
  • Nadolska, Malgorzata
  • Vollestad, Einar
  • Gazda, Maria
  • Strandbakke, Ragnar
  • Norby, Truls
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] We report on essential properties of materials in the series La0.5Ba0.5Co1-xFexO3-delta as positrodes for proton ceramic electrochemical cells (PCECs). The unit cell and thermochemical expansion coefficient (TCEC) of these cubic perovskites decrease with iron content x, the TCEC of La0.5Ba0.5FeO3-delta going as low as 1110(-6) 1/K. The materials behave as LaMO3 perovskites with small band gaps and Ba acting as acceptors compensated by electron holes and oxygen vacancies. The electrical properties are dominated by p-type conduction with high large polaron mobilities for the Co-rich compositions at low temperatures, shifting towards small polaron mobilities with increasing Fe content. X-ray absorption spectroscopy (XAS) shows that Co is in a high spin state and takes on the main part of the cation oxidation state changes, and that hole states are in orbitals overlapping with the O 2p states, confirming the large polaronic behaviour, while holes on Fe are more localised at the cation. Hydration is more pronounced in inert atmospheres, as hydration of oxygen vacancies is easier than hydrogenation and increases with Fe content, in line with the commonly accepted finding that delocalization of holes disfavours protonation. Fe-rich compositions benefit from lower TCEC and higher hydration and hence expected proton permeability, at the cost of lower electronic conductivity. The surfaces are hydrophobic irrespective of Fe content, suggesting weak chemisorption of the underlaying water layer, possibly giving relatively many available surface sites for oxygen adsorption, but limited surface proton conductance - both of importance to positrodes for operando PCECs., This work is financed by The Research Council of Norway (Grant no 299736 "FunKeyCat") through the M-ERA.NET Joint Call 2018, and through project FunKey Cat supported by the National Science Centre, Poland under the M-ERA.NET 2, which has received funding from the European Union's Horizon 2020 research and innovation program under Grant agreement No 685451. Also M-ERA.NET in Spain and Spanish Ministry of Science and Innovation through the PCIN-2017-125, PIE 20238AT016, and RYC2021-033889-I funding is kindly acknowledged. We acknowledge the Solaris National Radiation Centre Poland for access to the XAS/PEEM beamline (proposal ID 191011) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluating oxide nanoparticle exsolution on A-site deficient PrBaCo 2 O 6-o electrodes

  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • López-García, Andrés
  • Fabuel Robledo, Maria
  • Delgado-Galicia, Blanca|||0009-0004-4655-5789
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis, Cecilia
  • Haas, Sylvio
  • Vøllestad, Einar
  • Wachowski, Sebastian
  • Strandbakke, Ragnar
  • Norby, Truls
[EN] Nanoparticle exsolution is a powerful technique for functionalizing redox oxides in energy applications, particularly at high temperatures. It shows promise for solid oxide fuel cells and electrolyzers. However, exsolution of other chemistries like metal oxides is not well studied, and the mechanism is poorly understood. This work explores oxide exsolution in PrBa1¿xCo2O6¿¿ (x = 0, 0.05, 0.1, 0.15) double perovskites, practiced electrodes in proton ceramic fuel cells and electrolyzers. Oxide exsolution in PrBa1¿xCo2O6¿¿ aimed at boosting the electrocatalytic activity and was evaluated by varying intrinsic materials-related properties, viz. A-site deficiency and external parameters (temperature, under fixed time, and pO2 = 10¿5 atm conditions). The materials were analyzed with conventional characterization tools and synchrotron-based small-angle x-ray scattering. Unlike metal-nanoparticle exsolution, increasing the A-site deficiency did not enhance the extent of oxide-nanoparticle exsolution, whereas larger nanoparticles were obtained by increasing the exsolution temperature. Combined Raman spectroscopy and electron microscopy analysis revealed that BaCoO3, Co3O4, and amorphous BaCO3 nanoparticles were formed on the surface of the double perovskites after the reductive treatments. The present results demonstrate the complexity of oxide-nanoparticle exsolution in comparison with metal-nanoparticle exsolution. Further materials screening and mechanistic studies are needed to enhance our understanding of this method for functionalizing proton ceramic electrochemical cells (PCEC) electrodes., We acknowledge the Spanish Government through the M-ERA.NET Joint Call 2018 'FunKeyCat' (PCI2019-103742, RYC2021-033889-I), the Research Council of Norway (Grant No. 299736), and the National Science Centre Poland, which has received funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 685451. We thank the support of the Electronic Microscopy Service of the Universitat Politecnica de Valencia and the Norwegian Center for Transmission Electron Microscopy (NORTEM) (No. 197405/F50). The authors acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for providing experimental facilities. SAXS-WAXS measurements were carried out at PETRA III (beamtime allocated for proposals I-20210219 and I-20210223), and the authors would like to thank Andre Conceicao for assistance in using the SAXSMAT beamline P62.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modulating redox properties of solid-state ion-conducting materials using microwave irradiation

  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Santos-Blasco, Joaquín
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Borrás-Morell, J. F.
  • Catalán-Martínez, David
  • Navarrete Algaba, Laura
[EN] The industrial adoption of low-carbon technologies and renewable electricity requires novel tools for electrifying unitary steps and efficient energy storage, such as the catalytic synthesis of valuable chemical carriers. The recently-discovered use of microwaves as an effective reducing agent of solid materials provides a novel framework to improve this chemical-conversion route, thanks to promoting oxygen-vacancy formation and O-2-surface exchange at low temperatures. However, many efforts are still required to boost the redox properties and process efficiency. Here, we scrutinise the dynamics and the physicochemical dependencies governing microwave-induced redox transformations on solid-state ion-conducting materials. The reduction is triggered upon a material-dependent induction temperature, leading to a characteristically abrupt rise in electric conductivity. This work reveals that the released O-2 yield strongly depends on the material's composition and can be tuned by controlling the gas-environment composition and the intensity of the microwave power. The reduction effect prevails at the grain surface level and, thus, amplifies for fine-grained materials, and this is ascribed to limitations in oxygen-vacancy diffusion across the grain compared to a microwave-enhanced surface evacuation. The precise cyclability and stability of the redox process will enable multiple applications like gas depuration, energy storage, or hydrogen generation in several industrial applications., This study forms part of the MFA programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, and "Ramon y Cajal" Fellowship RYC2021-033889-I), and the Universitat Politecnica de Valencia (UPV) are gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microwave-Enhanced Methane Decomposition over Promoted Carbon Catalysts for Sustainable Hydrogen and Carbon Nanomaterial Production

  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Bacete-Barchín, Lucía
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • López-García, Andrés
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Gutiérrez Cano, José Daniel
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Methane decomposition is emerging as a critical technology for producing CO2-free H2, a cornerstone for the deep decarbonization of energy systems. Electrifying this process through microwave-assisted catalysis introduces a transformative sustainability advantage by enabling direct, selective energy delivery to the catalyst, minimizing thermal inefficiencies, and unlocking compatibility with renewable electricity. Here, we demonstrate that activated carbon catalysts under microwave irradiation achieve efficient methane activation at temperatures far below those required in conventional thermal systems. At 500 degrees C, methane conversion reached 80% with complete selectivity toward hydrogen, revealing a strong microwave-carbon synergy that accelerates reaction kinetics. The resulting carbon deposits exhibited tunable morphologies, ranging from amorphous coatings to nanocubes and nanofibers. By controlling the operating conditions, microwave-assisted methane decomposition enabled the simultaneous production of functional carbon nanomaterials. The catalytic performance was further enhanced by earth-abundant metal promoters: alkali metals improved catalyst stability and hydrogen desorption, while Fe delivered the highest conversions and directed the growth of thin graphitic layers on nanoparticles and the carbon support. When benchmarked against conventional thermal decomposition, the Fe/C catalyst exhibited a boost in methane conversion from similar to 50 to similar to 75% when operated under microwave irradiation, highlighting the benefits of this operation. These findings establish microwave-driven methane decomposition as a platform for low-temperature, electrified hydrogen production coupled with precision synthesis of carbon nanostructures, advancing scalable, sustainable catalytic processes for H2 production based on inexpensive, widely available materials., Funded by the Aid for First Research Projects (PAID-06-24), Vice-Rectorate for Research of the Universitat Politecnica de Valencia (UPV). Financial support by the Spanish Ministry of Science and Innovation and European Union (TED2021-132590B-C22/AEI/10.13039/501100011033/ and NextGenerationEU/PRTR, PID2022-139663OB-100, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, "Ramon y Cajal" Fellowship RYC2021-033889-I). Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modulating redox properties of solid-state ion-conducting materials using microwave irradiation

  • Serra Alfaro, José Manuel
  • Balaguer, María
  • Santos-Blasco, J.
  • Borras-Morell, J. F.
  • García-Baños, Beatriz
  • Plaza-Gonzalez, P.
  • Catalán-Martínez, David
  • Penaranda-Foix, F.
  • Dominguez, A.
  • Navarrete, L.
  • Catalá-Civera, José M.
The industrial adoption of low-carbon technologies and renewable electricity requires novel tools for electrifying unitary steps and efficient energy storage, such as the catalytic synthesis of valuable chemical carriers. The recently-discovered use of microwaves as an effective reducing agent of solid materials provides a novel framework to improve this chemical-conversion route, thanks to promoting oxygen-vacancy formation and O-surface exchange at low temperatures. However, many efforts are still required to boost the redox properties and process efficiency. Here, we scrutinise the dynamics and the physicochemical dependencies governing microwave-induced redox transformations on solid-state ion-conducting materials. The reduction is triggered upon a material-dependent induction temperature, leading to a characteristically abrupt rise in electric conductivity. This work reveals that the released O yield strongly depends on the material's composition and can be tuned by controlling the gas-environment composition and the intensity of the microwave power. The reduction effect prevails at the grain surface level and, thus, amplifies for fine-grained materials, and this is ascribed to limitations in oxygen-vacancy diffusion across the grain compared to a microwave-enhanced surface evacuation. The precise cyclability and stability of the redox process will enable multiple applications like gas depuration, energy storage, or hydrogen generation in several industrial applications., This study forms part of the MFA programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, and “Ramon y Cajal” Fellowship RYC2021-033889-I), and the Universitat Politècnica de València (UPV) are gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopía Electrónica of the UPV., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed