Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Red emitting MTiO3 (M = Ca or Sr) phosphors doped with Eu3+ or Pr3+ with some some cations as co-dopants

  • Marí, B.|||0000-0003-0001-419X
  • Singh, Krishan Chander
  • Cembrero Coca, Paula
  • Singh, I.
  • Singh, D.
  • Chand, S.
[EN] Ca (or Sr)TiO3:Eu3+ , M (Li + or Na+ or K+ ) and CaTiO3:Pr 3+ , M (Li + or Na+ or Ag+ or K+ or Gd3+ or La3+ ) powders were prepared by combustion synthesis method and the samples were further heated to !1000 !C to improve the crystallinity. The structure and morphology of materials were examined by X-ray diffraction (XRD) and a scanning electron microscopy (SEM). The morphologies of SrTiO3:Eu3+ , CaTiO3:Eu3+ or CaTiO3:Pr 3+ powders co-doped with other metal ions were very similar. Small and coagulated particles of nearly cubical shapes with small size distribution having smooth and regular surface were formed. Photo-luminescence spectra of CaTiO3:Pr 3+ and co-doped either with Li + , Na+ , K+ , Ag+ , La3+ or Gd3+ ions showed red emissions at 613 nm due to the 1 D2 ? 3 H4 transition of Pr 3+ . The variation of intensity of emission peak with different co-doping follows the order: K+ > Ag+ > Na+ > Li + > La3+ > Gd3+ . The characteristic emissions of CaTiO3:Eu3+ lattices had strong emission at 614 and 620 nm for 5 D0 ? 7 F2 with other weak transitions observed at 580, 592, 654, 705 nm for 5 D0 ? 7 Fn transitions where n = 0, 1, 3, 4 respectively in all host lattices. Photoluminescence intensity in SrTiO3:Eu3+ is more than CaTiO3:Eu3+ lattices. A remarkable increase of photoluminescence intensity (in 5 D0 ? 7 F2 transition) was observed if co-doped with Li + ions in CaTiO3:Eu3+ and SrTiO3:Eu3+ . " 2013 Elsevier B.V. All rights reserved., This work was supported by Spanish Government through MCINN Grant MAT2009-14625-C03-03 and the European Commission through NanoCIS Project (FP7-PEOPLE-2010-IRSES ref. 269279). K.C. Singh acknowledges MEC for financial support (SAB2010-0019).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrochemical Fabrication and Characterization of p-CuSCn/n-ZnO Heterojunction Devices

  • Marí, B.|||0000-0003-0001-419X
  • Mollar García, Miguel Alfonso|||0000-0003-4315-0407
  • Singh, Krishan Chander
  • Ortiz Moya, Laura
[EN] p-CuSCN/n-ZnO heterojunction devices were prepared by depositing CuSCN electrochemically over a ZnO film previously deposited. The compact and smooth surface films of n-ZnO on FTO substrate were deposited electrochemically from a nonaqueous bath. The CuSCN films were characterized by cyclic voltammetry, chronoamperometry, SEM, energy-dispersive X-ray spectroscopy, and XRD measurements. The pure crystalline films of CuSCN with intrinsic trigonal pyramidal morphology over the ZnO films were obtained electrochemically by fixing the SCN/Cu ratio in the electrolytic bath 1.5:1 at 60 °C with −0.4 V deposition potential. Photocurrent measurements showed the increase of intrinsic surface states or defects in ZnO/CuSCN interface. The I V characteristic of p-CuSCN/n-ZnO heterojunctions shows good rectification behavior with a rectification ratio of 250 at ±2 V. The value of 2.81 of the ideality factor calculated by fitting the semilogarithmic I V data with the ideal diode equation revealed the better electrical contact between the smooth ZnO and CuSCN films than that of ZnO nano-rods and CuSCN crystallites., This work was supported by the Spanish Government through MCINN grant MAT2009-14625-C03-03 and European Commission through NanoCIS project FP7-PEOPLE-2010-IRSES (ref. 269279). K.C. Singh acknowledges MEC for the financial support (SAB2010-0019).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Growth mechanism and morphology of ZnO/Eosin-Y hybrid films

  • Marí, B.|||0000-0003-0001-419X
  • Mollar García, Miguel Alfonso|||0000-0003-4315-0407
  • Singh, Krishan Chander
  • Moya Forero, Mónica Mercedes
  • Rana, Ravi
Thin hybrid films of ZnO/eosin-Y were prepared by electrodeposition at -0.8 and -0.9 V in aqueous and non-aqueous baths at temperatures ranging from 40 to 90 °C with dye concentrations of 100 and 400 µmol·L-1 . The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), and absorption spectroscopy. The films prepared in a non-aqueous bath were non-porous and did not adsorb dye molecules on their surface. However, the films grown in aqueous media were porous in nature and adsorbed dye during the deposition of ZnO. Preferential growth of the film along the (002) face was observed, and the highest crystallinity was achieved when the film was deposited at 60 °C. The maximum absorption was achieved for the films grown at 60 to 70 °C, a deposition potential of -0.9 V, and a dye concentration of 100 µmol·L-1 ., The project was supported by the Spanish Government through MCINN Grant (MAT2009-14625-C03-03) and MEC Financial Fund (SAB2010-0019) for Singh, K.C.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization and photoluminescence properties of some CaO, SrO and CaSrO2 phosphors co-doped with Eu3+ and alkali metal ions

  • Marí, B.|||0000-0003-0001-419X
  • Singh, Ishwar
  • Om, Hari
  • Chand, Subhash
  • Singh, Krishan Chander
  • Moya Forero, Mónica Mercedes
CaO:Eu3+, M+ (Li+ or Na+ or K+ ), SrO:Eu3+and CaSrO2:Eu3+ powders were prepared by combustion synthesis method and the samples were further heated to 1000 C to improve the crystallinity of the materials. The structure and morphology of materials were examined by X-ray diffraction and scanning electron microscopy. The morphology of CaO:Eu3+ and co-doped with alkali metal ions powders was very similar. Small and coagulated particles of nearly cubical shapes with small size distribution having smooth and regular surface were formed. The surface morphology of SrO and CaSrO2 materials was not smooth and coagulated particles of irregular shapes with different sizes were observed. The characteristic emissions of Eu3+ had strong emission at 614 and 620 nm for 5 D0 ? 7 F2 with other weak transitions observed at 580, 592, 654, 705 nm for 5 D0 ? 7 Fn transitions where n = 0, 1, 3, 4 respectively in all host lattices. Photoluminescence intensity followed the order as in CaO > CaSrO2 > SrO lattices. A remarkable increase of photoluminescence intensity was observed by the co-doping of alkali metal ions particularly K+ ions in CaO:Eu3+., This work was supported by Spanish Government through MCINN Grant MAT2009-14625-C03-03. K.C. Singh acknowledges MEC for financial support (SAB2010-0019).