Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Medium infrared transparency of MgO-MgAl2O4 directionally solidified eutectics

  • Moshtaghioun, Bibi Malmal
  • Peña, José I.
  • Merino, Rosa I.
MgAl2O4-MgO eutectic ceramics have been fabricated by the laser floating zone method. Increasing growth rates from 10 to 50 mm/h, the microstructure transformed from irregular MgO rod-to-lamellae phase and it approached to almost homogeneous rod morphology. At the highest used velocity of 750 mm/h, the cell structure was completely dominant and the samples were free from transversal cracks. Although the highest flexure strength was found at 750 mm/h growth rate, the maximum optical transmittance in the medium-infrared range was obtained for 50 mm/h growth rate and for 1 mm thick samples reached values higher than 75% in the wavelengths between 4 and 5.3 µm. The enhanced transmittance for the sample with 50 mm/h growth rate can be explained in terms of the close refraction indexes of the component phases and the characteristic lengths of the resulting microstructure showing fully dense ceramics with the finest and almost homogeneous microstructure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Mg2SiO4-MgAl2O4 directionally solidified eutectics: Hardness dependence modelled through an array of screw dislocations

  • Moshtaghioun, B.M.
  • Gomez-Garcia, D.
  • Peña, J.I.
Mg2SiO4-MgAl2O4 eutectic ceramics have been fabricated by means of the laser floating zone (LFZ) technique. The microstructure has revealed as an unusual one at lower growth rate, composed of broken lamellae of MgAl2O4 distributed randomly along one matrix, composed of Mg2SiO4. At higher growth rates, a cell structure with intra-cell lamella structure is dominant. Contrary to most eutectic systems, hardness is not dependent upon the inter-spacing, but it does depend on one characteristic length of lamellae: their perimeter. One simple model based upon the dislocation is proposed, which successfully accounts for such extraordinary hardness law. Accordingly, Mg2SiO4-MgAl2O4 eutectic ceramics fabricated at 50 mm/h growth rate with the smallest MgAl2O4 lamella perimeter favorably showed more elevated hardness (13.4 GPa from Vickers indentation and 15.3 GPa from nanoindentation) and strength (~430 MPa) than those found in the monolithic Mg2SiO4 matrix.