Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of the Composition on the Environmental Impact of Soft Ferrites

  • Gómez, Patricia
  • Elduque, Daniel
  • Pina, Carmelo
  • Javierre, Carlos
The aim of this paper is to analyze the influence of the composition on the environmental impact of the two main types of soft ferrites, allowing scientists and engineers to compare them based not only on cost and properties, but also on an environmental point of view. Iron oxides are the basis of soft ferrites, but these ferrites have a wide range of compositions, using materials such as manganese or nickel, which affect their magnetic properties, but also modify the environmental impact. A Life Cycle Assessment has been carried out for manganese-zinc (MnZn) and nickel-zinc (NiZn) soft ferrites, with a Monte Carlo approach to assess multiple compositions. The LCA model was developed with SimaPro 8.4, using the EcoInvent v3.4 life cycle inventory database. Environmental impact values were calculated under the ReCiPe and Carbon Footprint methodologies, obtaining a broad variety of results depending on the composition. The results were also significantly different from the standard EcoInvent ferrite. For the analyzed soft ferrites, the presence of manganese or nickel is a key factor from an environmental perspective, as these materials involve high environmental impacts, and their supply risk has increased during recent years, making them a concern for European manufacturers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electricity consumption estimation of the polymer material injection-molding manufacturing process: empirical model and application

  • Elduque, Ana
  • Elduque, Daniel
  • Pina, Carmelo
  • Clavería, Isabel
  • Javierre, Carlos
Polymer injection-molding is one of the most used manufacturing processes for the production of plastic products. Its electricity consumption highly influences its cost as well as its environmental impact. Reducing these factors is one of the challenges that material science and production engineering face today. However, there is currently a lack of data regarding electricity consumption values for injection-molding, which leads to significant errors due to the inherent high variability of injection-molding and its configurations. In this paper, an empirical model is proposed to better estimate the electricity consumption and the environmental impact of the injection-molding process. This empirical model was created after measuring the electricity consumption of a wide range of parts. It provides a method to estimate both electricity consumption and environmental impact, taking into account characteristics of both the molded parts and the molding machine. A case study of an induction cooktop housing is presented, showing adequate accuracy of the empirical model and the importance of proper machine selection to reduce cost, electricity consumption, and environmental impact.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Visco-Hyperelastic Model with Damage for Simulating Cyclic Thermoplastic Elastomers Behavior Applied to an Industrial Component

  • Tobajas, Rafael
  • Elduque, Daniel
  • Ibarz, Elena
  • Javierre, Carlos
  • Canteli, Alfonso F.
  • Gracia, Luis
In this work a nonlinear phenomenological visco-hyperelastic model including damage consideration is developed to simulate the behavior of Santoprene 101-73 material. This type of elastomeric material is widely used in the automotive and aeronautic sectors, as it has multiple advantages. However, there are still challenges in properly analyzing the mechanical phenomena that these materials exhibit. To simulate this kind of material a lot of theories have been exposed, but none of them have been endorsed unanimously. In this paper, a new model is presented based on the literature, and on experimental data. The test samples were extracted from an air intake duct component of an automotive engine. Inelastic phenomena such as hyperelasticity, viscoelasticity and damage are considered singularly in this model, thus modifying and improving some relevant models found in the literature. Optimization algorithms were used to find out the model parameter values that lead to the best fit of the experimental curves from the tests. An adequate fitting was obtained for the experimental results of a cyclic uniaxial loading of Santoprene 101-73.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sustainable materials with enhanced mechanical properties based on industrial polyhydroxyalkanoates reinforced with organomodified sepiolite and montmorillonite

  • Garcia-Quiles, Lidia
  • Fernández Cuello, Ángel
  • Castell, Pere
Microplastics have become one of the greatest environmental challenges worldwide. To turn this dramatic damage around, EU regulators now want to ensure that plastic itself is fully recyclable or biodegradable. The aim of the present work is to develop a biobased and biodegradable biocomposite based on commercial polyhydroxyalkanoates (PHAs) and nanoclays, with the objective of achieving a reduction of rancid odour while avoiding any loss in thermomechanical properties, thus tackling two key disadvantages of PHAs. This research aims at completely characterising the structural, thermal and mechanical behaviour of the formulations developed, understanding the compatibility mechanisms in order to be able to assess the best commercial combinations for industrial applications in the packaging and automotive sectors. We report the development of nine nanobiocomposite materials based on three types of commercial PHA matrices: a linear poly(3-hydroxybutyrate) (P3HB); two copolymers based on poly(3-hydroxybutyrate)-co-poly(4-hydroxybutyrate) (P3HB-co-P4HB); and nanoclays, which represent a different polar behaviour. Dispersion achieved is highly relevant compared with literature results. Our findings show impressive mechanical enhancements, in particular for P3HB reinforced with sepiolite modified via aminosilanes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dimensional Stability and Process Capability of an Industrial Component Injected with Recycled Polypropylene

  • Galve, J.E.
  • Elduque, D.
  • Pina, C.
  • Clavería, I.
  • Acero, R.
  • Fernández, A.
  • Javierre, C.
The usage of recycled polymers for industrial purposes arises as one of the most promising methods of reducing environmental impact and costs associated with scrapping parts. This paper presents a systematic study of the dimensional stability of a raw and 100% recycled polypropylene subjected to realistic environmental conditions occurring along its working life. The component studied is an internal part of an induction hob assembly. Industrial samples manufactured with both materials, in the same mold, and in the same injection machine, are subjected to ejection conditions, storage conditions (50 °C), and extreme performance conditions (80 °C). Induced dimensional changes are registered and analyzed using a coordinate measuring machine, and a tactile sensing probe. To verify the process capability of the samples manufacturing, Cp and Cpk values are calculated to evaluate the suitability of the recycled material as an alternative. Results conclude that, although the use of recycled material implies slight differences in terms of dimensional stability due to the changes induced in the polymer structure, these differences are not significant enough to affect the injection process capability. Therefore, recycling arises as one effective method to reduce both overruns associated with the consumption of raw polypropylene material and its environmental impact.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Reducing off-flavour in commercially available polyhydroxyalkanoate materials by autooxidation through compounding with organoclays

  • García-Quiles, Lidia
  • Valdés, Arantzazu
  • Fernández Cuello, Ángel
  • Jiménez, Alfonso
  • Garrigós, María del Carmen
  • Castell, Pere
Polyhydroxyalkanoates (PHAs) are nowadays considered competent candidates to replace traditional plastics in several market sectors. However, commercial PHA materials exhibit unsatisfactory smells that can negatively affect the quality of the final product. The cause of this typical rancid odour is attributed to oxidized cell membrane glycolipids, coming from Gramnegative production strains, which remain frequently attached to PHAs granules after the extraction stage. The aim of this research is the development of customised PHA bio-nano-composites for industrial applications containing organomodified nanoclays with high adsorbance properties able to capture volatile compounds responsible for the displeasing fragrance. To this end, a methodology for the detection and identification of the key volatiles released due to oxidative degradation of PHAs has been established using a headspace solid-phase microextraction technique. We report the development of nine bio-nano-composite materials based on three types of commercial PHA matrices loaded with three species of nanoclays which represent a different polar behaviour. It has been demonstrated that although the reached outcoming effect depends on the volatile nature, natural sepiolite might result in the most versatile candidate for any the PHA matrices selected.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Tribological performance of nylon composites with nanoadditives for self-lubrication purposes

  • Clavería, I.
  • Gimeno, S.
  • Miguel, I.
  • Mendoza, G.
  • Lostalé, A.
  • Fernández, Á.
  • Castell, P.
  • Elduque, D.
A systematic study comparing the wear behaviour of composites with nylon matrix (PA66, PA46, PA12) and different nanoadditives and reinforcing additives (graphite, graphene, MoS2 and ZrO2) has been carried out in order to achieve a proper self-lubricant material for bearing cages. The wear characterisation was done using pin-on-disc tests, SEM and EDX analysis. The results show that better outcomes are obtained for composites based on PA12. The addition of ZrO2 offers negative values of wear due to the metallic particle transference from the counterface to the polymeric pin.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of the composition on the environmental impact of a casting magnesium alloy

  • Garcia Gutiérrez, I.
  • Elduque, D.
  • Pina, C.
  • Tobajas, R.
  • Javierre, C.
The influence of the composition of magnesium alloys on their environmental impact was analyzed. In order to perform a more accurate environmental impact calculation, life cycle assessment (LCA) with the ReCiPe 2016 Endpoint and IPCC 2013 GWP (100 y) methodology was used, taking the EcoInvent AZ91 magnesium alloy dataset as reference. This dataset has been updated with the material composition range of several alloys included in the European standard EN 1753:2019. The balanced, maximum, and minimum environmental impact values were obtained. In general, the overall impact of the studied magnesium alloys varied from 3.046 Pt/kg to 4.853 Pt/kg and from 43.439 kg CO2 eq./kg to 55.427 kg CO2 eq./kg, depending on the composition. In the analysis of maximum and minimum environmental impacts, the alloy that had the highest uncertainty was 3.5251, with a range of ±7.20%. The element that contributed the most to increase its impact was silver. The AZ91 alloy, provided by the EcoInvent dataset, had a lower environmental impact than all the magnesium alloys studied in this work. The content of critical raw materials (CRMs) was also assessed, showing a high content in CRMs, between 89.72% and 98.22%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Enhancement of tribological behavior of rolling bearings by applying a multilayer ZrN/ZrCN coating

  • Clavería, I.
  • Lostalé, A.
  • Fernández, Á.
  • Castell, P.
  • Elduque, D.
  • Mendoza, G.
  • Zubizarreta, C.
This paper focuses on the tribological behaviour of ZrN/ZrCN coating on bearing steel substrates DIN 17230, 100Cr6/1.3505. Coatings are applied at room temperature processes by means of Cathodic Arc Evaporation (CAE), a kind of Physical Vapor Deposition (PVD) technique. In order to achieve a satisfactory compromise between coating-substrate adhesion and the surface roughness requirement of the bearing rings, a polish post-processing is proposed. Different polish post-processing times and conditions are applied. The coated and polished bearing rings are tested under real friction torque test protocols. These tests show that the application of the coating does not entail a significant improvement in friction performance of the bearing. However, fatigue tests in real test bench are pending to evaluate the possible improvement in bearing life time.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Color fixation strategies on sustainable poly-butylene succinate using biobased itaconic acid

  • Quiles, L.G.
  • Vidal, J.
  • Luzi, F.
  • Dominici, F.
  • Fernandez Cuello, Á.
  • Castell, P.
Biopo-lybutylene succinate (bioPBS) is gaining attention in the biodegradable polymer market due to its promising properties, such as high biodegradability and processing versatility, representing a potential sustainable replacement for fossil-based commodities. However, there is still a need to enhance its properties for certain applications, with aesthetical and mechanical properties being a challenge. The aim of the present work is to improve these properties by adding selected additives that will confer bioPBS with comparable properties to that of current counterparts such as polypropylene (PP) for specific applications in the automotive and household appliances sectors. A total of thirteen materials have been studied and compared, being twelve biocomposites containing combinations of three different additives: a commercial red colorant, itaconic acid (IA) to enhance color fixation and zirconia (ZrO2) nanoparticles to maintain at least native PBS mechanical properties. The results show that the combination of IA and the coloring agent tends to slightly yellowish the blend due to the absorbance spectra of IA and also to modify the gloss due to the formation of IA nanocrystals that affects light scattering. In addition, for low amounts of IA (4 wt %), Young’s Modulus seems to be kept while elongation at break is even raised. Unexpectedly, a strong aging affect was found after four weeks. IA increases the hydrophilic behavior of the samples and thus seems to accelerate the hydrolization of the matrix, which is accompanied by an accused disaggregation of phases and an overall softening and rigidization effect. The addition of low amounts of ZrO2 (2 wt %) seems to provide the desired effect for hardening the surface while almost not affecting the other properties; however, higher amounts tends to form aggregates saturating the compounds. As a conclusion, IA might be a good candidate for color fixing in biobased polymers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of self-lubrication enhancement via PA66 strategies: Texturing and nano-reinforcement with ZrO2 and graphene

  • Clavería, I.
  • Elduque, D.
  • Lostalé, A.
  • Fernández, Á.
  • Castell, P.
  • Javierre, C.
Graphene nanoflakes and zirconium dioxide (ZrO2) were added to polyamide 66-based composites with glass fibre in order to improve their self-lubricating properties and make them suitable for high-performance bearing applications. The influence of texturing the surfaces was also investigated. The tribological behaviour was analysed for different combinations of hybrid polymeric composites, percentages of additive, and texturing geometries. The results show that the lowest low friction coefficients are obtained for PA66 + 30GF with 5% graphene. Worn surfaces, analysed by scanning electron microscopy and optical microscopy confirm the enhancement of the tribological properties with the addition of graphene. Texturing results under dry lubrication are not relevant for tribological purposes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of the material composition on the environmental impact of ceramic glasses

  • Gómez, Patricia
  • Elduque, Daniel
  • Clavería, Isabel
  • Pina, Carmelo
  • Javierre, Carlos
An exhaustive study of the influence of ceramic glass material composition on the environmental impact has been performed. In order to perform a more accurate calculation of the environmental impact a life cycle assessment (LCA) was implemented using real material composition of ceramic glasses. Employing a sequential X-rays Fluorescence spectrometer, the composition of several ceramic glasses were analyzed, as this information is not published by the manufacturers. The environmental impact results of each ceramic glass were surveyed using EcoInvent v3.4 data, and SimaPro 8.4 software, following ReCiPe Endpoint and Carbon Footprint methodologies. The importance of considering the composition on the LCA is shown, establishing significant differences among the analyzed glasses. Few variations in the quantity of material composition generate high differences on the environmental impact values, demonstrating the high influence of the material composition on the environmental impact. Elements such as tin, lithium, and titanium are the ones that generate the highest contribution on the environmental impact. In contrast, silica sand shows the lowest impact in both methodologies despite it supposes between 58% and 63% of their compositions. Others such as barite and magnesium, together with neodymium emerged in the composition of the studied ceramic glasses as they are considered Critical Raw Materials by the European Union, due to their supply risk and economic importance.