Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 40
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dimensional Stability and Process Capability of an Industrial Component Injected with Recycled Polypropylene

  • Galve, J.E.
  • Elduque, D.
  • Pina, C.
  • Clavería, I.
  • Acero, R.
  • Fernández, A.
  • Javierre, C.
The usage of recycled polymers for industrial purposes arises as one of the most promising methods of reducing environmental impact and costs associated with scrapping parts. This paper presents a systematic study of the dimensional stability of a raw and 100% recycled polypropylene subjected to realistic environmental conditions occurring along its working life. The component studied is an internal part of an induction hob assembly. Industrial samples manufactured with both materials, in the same mold, and in the same injection machine, are subjected to ejection conditions, storage conditions (50 °C), and extreme performance conditions (80 °C). Induced dimensional changes are registered and analyzed using a coordinate measuring machine, and a tactile sensing probe. To verify the process capability of the samples manufacturing, Cp and Cpk values are calculated to evaluate the suitability of the recycled material as an alternative. Results conclude that, although the use of recycled material implies slight differences in terms of dimensional stability due to the changes induced in the polymer structure, these differences are not significant enough to affect the injection process capability. Therefore, recycling arises as one effective method to reduce both overruns associated with the consumption of raw polypropylene material and its environmental impact.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of acoustic noise spectrum of domestic induction heating systems controlled by phase-accumulator modulators

  • Villa Lopez, Jorge
  • Artigas Maestre, Jose Ignacio
  • Beltran Blazquez, José Ramon
  • Dominguez Vicente, Alberto
  • Barragan Perez, Luis Angel
In domestic induction heating (IH) applications, the modulation technique applied to the inverter has a high influence on the acoustic noise emissions. These noise emissions must be avoided since they may be audible and annoying to the final user. This paper analyzes the acoustic noise emissions that appear when a series half-bridge resonant inverter is operated with a phase-accumulator based modulator. This modulation technique has the advantage of operating in the frequency domain, and it is compared with the classical PWM modulator regarding the audible noise generated. The frequencies of the tones in the acoustic noise spectrum are theoretically calculated from the parameters of the phaseaccumulator based modulator. The SFM (Spectral Flatness Measure) is used to quantify the number of cases in which tones are generated by the modulation. Two techniques are applied to the phase-accumulator based modulator and their effect is tested. Theoretical results are experimentally verified.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An amplifier-less acquisition chain for power measurements in series resonant inverters

  • Villa, Jorge
  • Artigas, José I.
  • Barragán, Luis A.
  • Navarro, Denis
Successive approximation register (SAR) analog-to-digital converter (ADC) manufacturers recommend the use of a driver amplifier to achieve the best performance. When a driver amplifier is not used, the conversion speed is severely penalized because of the need to meet the settling time constraint. This paper proposes a simple digital correction method to raise the performance (conversion speed and/or accuracy) when the acquisition chain lacks a driver amplifier. It is intended to reduce the cost, size and power consumption of the conditioning circuit while maintaining acceptable performance. The method is applied to the measurement of the output power delivered by a series resonant inverter for domestic induction heating.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Computing in the blink of an eye: Current possibilities for edge computing and hardware-agnostic programming

  • Ghasemi, Mohammad
  • Lucía, Óscar
  • Lucía, Sergio
With the rapid advancements of the internet of things, systems including sensing, communication, and computation become ubiquitous. The systems that are built with these technologies are increasingly complex and therefore require more automation and intelligent decision-making, while often including contact with humans. It is thus critical that such interactions run smoothly in real time, and that the automation strategies do not introduce important delays, usually not larger than 100 milliseconds, as the blink of a human eye. Pushing the deployment of the algorithms on embedded devices closer to where data is collected to avoid delays is one of the main motivations of edge computing. Further advantages of edge computing include improved reliability and data privacy management. This work showcases the possibilities of different embedded platforms that are often used as edge computing nodes: embedded microcontrollers, embedded microprocessors, FPGAs and embedded GPUs. The embedded solutions are compared with respect to their cost, complexity, energy consumption and computing speed establishing valuable guidelines for designers of complex systems that need to make use of edge computing. Furthermore, this paper shows the possibilities of hardware-agnostic programming using OpenCL, illustrating the price to pay in efficiency when software can be easily deployed on different hardware platforms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Probability-Based Optimal Control Design for Soft Landing of Short-Stroke Actuators

  • Moya-Lasheras, Eduardo
  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
The impact forces during switching operations of short-stroke actuators may cause bouncing, audible noise, and mechanical wear. The application of soft-landing control strategies to these devices aims at minimizing the impact velocities of their moving components to ultimately improve their lifetime and performance. In this brief, a novel approach for soft-landing trajectory planning, including probability functions, is proposed for optimal control of the actuators. The main contribution of the proposal is that it considers the uncertainty in the contact position, and hence, the obtained trajectories are more robust against system uncertainties. The problem is formulated as an optimal control problem and transformed into a two-point boundary value problem for its numerical resolution. Simulated and experimental tests have been performed using a dynamic model and a commercial short-stroke solenoid valve. The results show a significant improvement in the expected velocities and accelerations at contact with respect to past solutions in which the contact position is assumed to be perfectly known.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A recursive methodology for modelling multi-stranded wires with multilevel helix structure

  • Plumed, Emilio
  • Lope, Ignacio
  • Carretero, Claudio
  • Acero, Jesús
Multi-stranded litz wires are commonly used in magnetic devices for power electronics applications at medium-high frequency range, from several kHz up to hundreds of kHz. For these applications, litz-wire structure favours the uniformity of driven current in the cross-sectional area of conductors, alleviating ac losses (skin and proximity effects) and improving the global efficiency of the application. These features are achieved by means of a special cable arrangement consisting of many isolated fine copper strands twisted together according to the manufacturing process. Often, the manufacturing process involves several twisting steps where bundles of moderate number of strands are successively twisted resulting in intricate cable structures. We present a mathematical description of the trajectories of copper strands with the purpose of obtaining the cable losses by means of Finite Element Analysis (FEA) simulation tools. Moreover, a nomenclature for this multilevel structures is also proposed. Parameters as the number of twisting steps, number of strands, strand diameter or pitch length, are included in this representation, allowing to compare the performance of different manufacturing solutions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis and Modeling of the Forces Exerted on the Cookware in Induction Heating Applications

  • Acero, Jesús
  • Lope, Ignacio
  • Carretero, Claudio
  • Burdio, José M.
We present a semianalytical model for calculating the forces exerted on cookware in domestic induction heating applications. The developed model is based on the Maxwell''s stress tensor and is also based on the existing semianalytic expressions of the electromagnetic fields in planar induction heating systems, which are expressed in terms of Fourier-Bessel series. Taking advantage of the axial symmetry of usual domestic induction heating systems, the flux of the vertical component of the Maxwell''s stress tensor is analytically integrated and the vertical force is obtained. The proposed model captures both eddy currents and magnetization that occurs in typical ferromagnetic cookware. The model is verified by means of two-dimensional Finite Element simulations and also is tested by means of measurements of the change of the weight experimented by cookware due to the forces during the heating process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Adapting of Non-Metallic Cookware for Induction Heating Technology via Thin-Layer Non-Magnetic Conductive Coatings

  • Acero, Jesús
  • Lope, Ignacio
  • Carretero, C.
  • Burdío, José M.
We analyze the feasibility of heating non-metallic cookware, unappropriate for heating by means of induced currents, with the purpose of extending the applicability range of the current induction heating cooktops. In order to turn materials as glass, ceramic, wood or plastic into suitable for the induction heating technology, we propose the use of thin layers of a metal (not necessarily a ferromagnetic material) which can be deposited on a surface by means of a thin or thick layer technology. For this purpose, the inductive performance of these layers is investigated by means of an analytical electromagnetic model, finite element simulations and experimental measurements. Calculations point out that for a specific induction arrangement working at a fixed frequency, it exists a thickness which maximizes the induction efficiency for each layer material. The suitability of this result is tested by means of a set of samples with copper thin layers whose thicknesses range from one hundred of nanometers to tens of micrometers, which are implemented using a phase vapor deposition (PVD) technology. The obtained induction efficiency and equivalent resistance are compared with those obtained with conventional ferromagnetic materials. As a proof of concept, the inner and outer bottoms of two glass pots are covered with a copper layer of 2µm, and 1.5µm , respectively, and 1 kW is inductively supplied by means of a series resonant inverter, reaching the boiling water conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multiple-Output ZVS Resonant Inverter Architecture for Flexible Induction Heating Appliances

  • Sarnago, Hector
  • Guillen, Pablo
  • Burdio, Jose M.
  • Lucia, Oscar
Flexible cooking surfaces have changed the domestic induction heating product paradigm enabling the use of a wider range of cookware materials, shapes, and positions. In order to implement such systems, multiple-output resonant inverters featuring high-performance and high-efficiency operation while achieving a cost-effective implementation are required. This paper proposes a multiple-output zero-voltage-switching resonant inverter for flexible induction heating appliances. The proposed converter features a matrix structure, enabling a cost-effective implementation with a reduced number of power devices while achieving high performance and low switching losses. It has been tested by means of an experimental prototype featuring 48 induction heating coils, proving the feasibility of the proposed approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of the composition on the environmental impact of a casting magnesium alloy

  • Garcia Gutiérrez, I.
  • Elduque, D.
  • Pina, C.
  • Tobajas, R.
  • Javierre, C.
The influence of the composition of magnesium alloys on their environmental impact was analyzed. In order to perform a more accurate environmental impact calculation, life cycle assessment (LCA) with the ReCiPe 2016 Endpoint and IPCC 2013 GWP (100 y) methodology was used, taking the EcoInvent AZ91 magnesium alloy dataset as reference. This dataset has been updated with the material composition range of several alloys included in the European standard EN 1753:2019. The balanced, maximum, and minimum environmental impact values were obtained. In general, the overall impact of the studied magnesium alloys varied from 3.046 Pt/kg to 4.853 Pt/kg and from 43.439 kg CO2 eq./kg to 55.427 kg CO2 eq./kg, depending on the composition. In the analysis of maximum and minimum environmental impacts, the alloy that had the highest uncertainty was 3.5251, with a range of ±7.20%. The element that contributed the most to increase its impact was silver. The AZ91 alloy, provided by the EcoInvent dataset, had a lower environmental impact than all the magnesium alloys studied in this work. The content of critical raw materials (CRMs) was also assessed, showing a high content in CRMs, between 89.72% and 98.22%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Deep Learning-Based Magnetic Coupling Detection for Advanced Induction Heating Appliances

  • Lucia, O.
  • Navarro, D.
  • Guillen, P.
  • Sarnago, H.
  • Lucia, S.
Induction heating has become the reference technology for domestic heating applications due to its benefits in terms of performance, efficiency and safety, among others. In this context, recent design trends aim at providing highly flexible cooking surfaces composed of multi-coil structures. As in many other wireless power transfer systems, one of the main challenges to face is the proper detection of the magnetic coupling with the induction heating load in order to provide improved thermal performance and safe power electronic converter operation. This is specially challenging due to the high variability in the materials used in cookware as well as the random pot placement in flexible induction heating appliances. This paper proposes the use of deep learning techniques in order to provide accurate area overlap estimation regardless of the used pot and its position. An experimental test-bench composed of a complete power converter, multi-coil system and real-Time measurement system has been implemented and used in this study to characterize the parameter variation with overlapped area. Convolutional neural networks are then proposed as an effective method to estimate the covered area, and several implementations are studied and compared according to their computational cost and accuracy. As a conclusion, the presented deep learning-based technique is proposed as an effective tool to estimate the magnetic coupling between the coil and the induction heating load in advanced induction heating appliances.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

First self-resonant frequency of power inductors based on approximated corrected stray capacitances

  • Lope, I.
  • Carretero, C.
  • Acero, J.
Inductive devices are extensively employed in power electronic systems due to their magnetic energy storage and power transfer capabilities. The current trend is towards increasing the frequency of operation in order to reduce the size of the magnetic components, but the main drawback is that the parasitic capacitance effect can become significant, and degrade the performance of the system. This work analyses the influence of this stray capacitance, and considers how to improve the performance of the device. In general, the impact of the stray capacitance on a magnetic component can be reduced by two methods: reducing the parasitic capacitance between turns of the winding or, alternatively, modifying the arrangement of the connection between turns. To evaluate the last option, an approximated expression of the first self-resonant frequency of the magnetic device is proposed. This gives a rapid assessment of the performance of different devices maintaining the overall equivalent inductance. The proposed expression accounts for the influence of the connection between turns in the bandwidth of the component. Finally, some numerical results are verified with planar coils manufactured on two-layer printed circuit boards.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fast Synthetic Dataset for Kitchen Object Segmentation in Deep Learning

  • Sagues-Tanco, R.
  • Benages-Pardo, L.
  • Lopez-Nicolas, G.
  • Llorente, S.
Object recognition has been widely investigated in computer vision for many years. Currently, this process is carried out through neural networks, but there are very few public datasets available with mask and class labels of the objects for the training process in usual applications. In this paper, we address the problem of fast generation of synthetic datasets to train neural models because creating a handcraft labeled dataset with object segmentation is a very tedious and time-consuming task. We propose an efficient method to generate a synthetic labeled dataset that adequately combines background images with foreground segmented objects. The synthetic images can be created automatically with random positioning of the objects or, alternatively, the method can produce realistic images by keeping the realism in the scales and positions of the objects. Then, we employ Mask-RCNN deep learning model, to detect and segment classes of kitchen objects using images. In the experimental evaluation, we study both synthetic datasets, automatic or realistic, and we compare the results. We analyze the performance with the most widely used indexes and check that the realistic synthetic dataset, quickly created through our method, can provide competitive results and accurately classify the different objects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Output voltage estimation of a half-bridge inverter for domestic induction heating applications

  • Villa, J.
  • Mur, A.
  • Artigas, J.I.
  • Barragan, L.A.
  • Urriza, I.
  • Navarro, D.
The power supplied to a vessel by a domestic induction-heating appliance is strongly dependent on several parameters the designer of the system has no control over: the type and the size of the vessel, misalignments between the pot and the inductor, temperatures, etc. A reliable estimation of the power is essential to ensure that the home appliance works under the expected conditions and the user experience is suitable. Furthermore, any reduction of hardware is totally welcome by consumer-electronics manufacturers. In this work, two methods to estimate the output voltage of a half-bridge inverter without digitizing it with an analog-to-digital converter are proposed and the effects that this estimation has on the power calculation are evaluated. Both methods are implemented and experimentally verified in a real prototype with an FPGA (Field-Programmable Gate Array).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Asymmetrical Noncomplementary Modulation Strategies for Independent Power Control in Multioutput Resonant Inverters

  • Guillen, P.
  • Sarnago, H.
  • Lucia, O.
  • Burdio, J.M.
Domestic induction heating (IH) design trends aim at improving user experience by increasing the cooking surface flexibility while maintaining a cost-effective implementation. The design of multioutput topologies is a key development for this purpose. However, due to their complexity, output power control usually relies on low-frequency pulse density modulations that, in addition to the slow response due to significant power averaging times, present severe restrictions as a consequence of power pulsation regulations. This article proposes two different noncomplementary asymmetrical modulation strategies that allow continuous operation avoiding both flicker and heating performance issues and obtaining a fast-response load power control. In order to prove the feasibility of the proposed modulations, a prototype featuring 12 IH loads of 2000-W maximum rated power has been built, and both strategies have been tested.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Vessel Recognition in Induction Heating Appliances - A Deep-Learning Approach

  • Villa, J.
  • Navarro, D.
  • Dominguez, A.
  • Artigas, J.I.
  • Barragan, L.A.
The selection of a vessel by an induction-hob user has a significant impact on the performance of the appliance. Due to the induction heating physical phenomena, there exist many factors that modify the equivalent impedance of induction hobs and, consequently, the operational conditions of the inverter. In particular, the type of vessel, which is a sole decision of the user, strongly affects these parameters. Besides, the ferromagnetic properties of the different materials the vessels are made with, vary differently with the excitation level, and given that most of the domestic induction hobs are based on an ac-bus voltage arrangement, the excitation level continuously varies. The algorithm proposed in this work takes advantage of this fact to identify the equivalent impedance of the load and recognize the pot. This is accomplished through a phase-sensitive detector that was already proposed in the literature and the application of deep learning. Different convolutional neural networks are tested on an augmented experimental-based dataset and the proposed algorithm is implemented in an experimental prototype with a system-on-chip. The proposed implementation is presented as an effective and accurate method to characterize and discriminate between different pots that could enable further functionalities in new generations of induction hobs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Development of new high-performance induction heating systems using model predictive control

  • Lucia, S.
  • Navarro, D.
  • Sarnago, H.
  • Lucia, O.
Modern induction heating systems involve usually many non-linear systems with different constraints, making difficult implementing classical controllers. In this context, model predictive control arises as a powerful technique able to provide high performance controllers with advanced functionalities. This paper will discuss the benefits of this control technique for induction heating systems and will provide an example of application for domestic systems. As a conclusion, MPC will help powering future induction heating systems with improved control capabilities and performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A front-end PFC stage for improved performance of flexible induction heating appliances

  • Pérez-Tarragona, M.
  • Sarnago, H.
  • Lucía, Ó.
  • Burdío, J.M.
Flexible cooking surfaces, eg. fully active surfaces, have gained lately an increasing importance in the domestic induction heating. Multi-inverter structures are a cost-efficient solution to develop this technology. However, they add control restrictions that can be solved with a power factor corrector (PFC) stage as proposed in this work. The proposed converter and modulation strategy work with zero voltage switching (ZVS), decreasing the switching losses, enabling a higher working frequency and, therefore, decreasing the magnetic devices size. The bus voltage is controllable and can be increased, easing the load power control and decreasing current through load and inverter and, so, the power losses. Besides, the switching frequency is constant in the mains cycle and can be modified to synchronize the load inverter and the PFC stage avoiding intermodulation noise. A 3.6 kW prototype has been implemented fulfilling the EMC requirements. The experimental waveforms and efficiency have been measured to prove the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Modeling domestic pancake cooking incorporating the rheological properties of the batter. Application to seven batter recipes

  • Lorente-Bailo, Silvia
  • Etayo, Íñigo
  • Salvador, María L.
  • Ferrer-Mairal, Ana
  • Martínez, Miguel Ángel
  • Calvo, Begoña
  • Grasa, Jorge
A 2D axisymmetric model for coupled transient heat and mass transfer was developed to simulate pancake cooking on a domestic induction hob. Unlike previous models, the current model considers a variable thermal contact conductance resulting from the crust formation at the bottom of the batter. It aims to take into account the heat transfer phenomena between the pan surface and the batter influenced by the physicochemical changes that the batter undergoes during the cooking process. To quantify the variation of the heat flow that this change in the structure of the batter involves, a normalized relationship between batter viscosity and the temperature was introduced in the model. The performance of seven cereal and legume flour-based batters was evaluated in an experimental setup. The proposed model is capable of adequately predicting the weight loss and the average surface temperature of the batter using parameters related with the rheological properties of the batter and its composition.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Model-free sliding-mode controller for soft landing of reluctance actuators

  • Moya-Lasheras, Eduardo
  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
Some electromagnetic actuators suffer from high velocity impacts during non-controlled switching operations, which cause contact bouncing, mechanical wear, and acoustic noise. Soft-landing control strategies aim at minimizing the impact velocities of these devices to improve their performance. This paper presents a sliding-mode controller for soft landing of single-coil reluctance actuators. It is a switching model-free controller, which results in a very simple implementation. A generalized dynamical hybrid model of an actuator is utilized for deriving the robustness condition, based on the Lyapunov theory. Then, the condition is evaluated for a dynamical model, based on a commercial device, and several reference trajectories. Finally, the controller performance is validated through simulations. The effect of the sampling rate on the resulting impact velocities is also analyzed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Rauch-Tung-Striebel Smoother for Position Estimation of Short-Stroke Reluctance Actuators

  • Moya-Lasheras, Eduardo
  • Schellekens, Jan M.
  • Sagues, Carlos
This article presents a novel state estimator for short-stroke reluctance actuators, intended for soft-landing control applications in which the position cannot be measured in real time. One of the most important contributions regards the system modeling for the estimator. The discrete state of the hybrid system is treated as an input. Moreover, the model is simplified to facilitate the identification of parameters and the implementation of the estimator. Thus, auxiliary variables are added to the state vector in order to indirectly account for modeling errors. Another important contribution is the state estimation approach. It is based on the Rauch–Tung–Striebel fixed-interval smoother, which allows refining past data from later observations. Numerous simulations are performed to analyze and compare the proposal and several alternatives. In addition, experimental testing is presented to evaluate and validate the estimator. As the simulated and experimental analyses demonstrate, the combined effect of the novel additions results in significantly smaller estimation errors of position and velocity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An efficient dynamical model of reluctance actuators with flux fringing and magnetic hysteresis

  • Moya Lasheras, Eduardo
  • Sagues, Carlos
  • Llorente, Sergio
This paper presents an efficient and accurate dynamical model of reluctance actuators, suitable for prediction and control applications. It is a hybrid lumped-parameter state-space model that takes into account the mechanical and electromagnetic dynamics, including eddy currents, flux fringing, magnetic hysteresis and saturation. Special emphasis is placed on the hysteresis model, which is based on the Jiles–Atherton theory. The novel parts of the model – the gap reluctance expression and the modified Jiles–Atherton hysteresis model – are identified, showing that the simulated results fit very well the experimental data. Furthermore, its potential application for control is exemplified with a feedback strategy, in which the design of the controller and observer are based on the proposed dynamical model.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Conductance control for electromagnetic-compatible induction heating appliances

  • Villa, Jorge
  • Dominguez, Alberto
  • Barragan, Luis A.
  • Artigas, Jose I.
  • Español, Jorge
  • Navarro, Denis
The design requirements of induction hobs are strongly restricted by efficiency, heating performance, cost, the generation of acoustic noise, and electromagnetic compatibility (EMC). These two latter topics, cost and EMC, motivated the research presented in this article. The different levels at which the equivalent load of the induction hob is excited generate a variation of the equivalent impedance throughout the grid period even if all the other parameters are kept constant. This can cause a nonsinusoidal consumption of the grid current which goes against the compliance with EMC standards. This article proposes an online controller which controls the conductance seen by the inverter by only modifying the switching frequency throughout the bus period. This greatly reduces the harmonic distortion of the grid current, no matter what is the type of the vessel used. Moreover, it requires neither power-factor correction rectifiers nor any additional circuitry and it has a faster dynamic response with respect to the traditional solutions used in induction hobs due to its higher bandwidth.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Soc-based in-cycle load identification of induction heating appliances

  • Villa, J
  • Barragan, LA
  • Artigas, JI
  • Navarro, D
  • Dominguez, A
  • Cabeza, T
The equivalent load of an induction hob is strongly dependent on many parameters such as the switching frequency, the excitation level and the size, type, and material of the vessel. However, real-time methods with the ability to capture the variation of the load with the excitation level have not been proposed in the literature. This is an essential issue as most of the commercial induction hobs are based on an ac-bus voltage arrangement. This article proposes a method based on a phase-sensitive detector that offers an online tracking of the equivalent impedance for this type of arrangements. This algorithm enables advanced control functionalities such as clustering of vessels, material recognition, and premature detection of ferromagnetic saturation, among others. After simulation and experimental validation, the method is implemented into a prototype with a system-on-chip to verify its real-time behavior. The proposed approach is applied to different real-life situations that prove its great performance and applicability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Development and validation of a computational model for steak double-sided pan cooking

  • Moya, J.
  • Lorente-Bailo, S.
  • Salvador, M.L.
  • Ferrer-Mairal, A.
  • Martínez, M.A.
  • Calvo, B.
  • Grasa, J.
The objective of this study was to develop and validate a numerical model to adequately simulate the double-sided pan cooking of beef in a domestic environment. The proposed model takes into account the heat flow from the pan to the meat and the moisture transfer, simultaneously with the meat deformation. The model considers the swelling pressure gradient caused by the shrinkage of the meat fibers and connective tissue due to the denaturation of proteins and the loss of the water holding capacity during cooking. The model results were successfully verified with experimental data of the central temperature and weight loss recorded during cooking for three degrees of doneness. The measured experimental temperatures at the center of the meat were 30 ± 3 °C (very rare), 44 ± 3 °C (rare) and 57 ± 2 °C (done) for a 19 mm steak thickness. Meanwhile, their water losses were 4 ± 2 %, 8 ± 1 % and 11 ± 2 %, respectively. The root mean squared errors of the model predictions were 2.16 °C (very rare), 3.56 °C (rare) and 4.57 °C (done) for the central temperature and 1.48 %, 2.08 % and 2.40 %, respectively for the water loss. The model also correctly predicts cooking times for steaks of different thicknesses, taking weight loss as a reference to set this time. The proposed model is postulated as a useful cooking assistance tool to estimate the optimal cooking time according to consumer preferences.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design methodology of high performance domestic induction heating systems under worktop

  • Plumed, E.
  • Acero, J.
  • Lope, I.
  • Burdío, J. M.
This study presents design guidelines for planar induction systems whose winding is considerably farther from its load than in usual arrangements. Optimum efficiency design is paramount for larger distances due to the magnetic field dispersion. To this end, a parameterised finite element model is used to ascertain the system''s parameters in this new configuration. This model is used to test variations in frequency, inductor-load distance and inductor diameter. From simulation results, efficiency, output power, power loss volumetric density and near field measurement predictions are obtained. Graphical representation of these results is used to determine the viability of each possible design, choosing one to develop a prototype. Moreover, a study was carried out with Pareto techniques to determine the effect of ferrite coverage and thickness, as well as its distance to the aluminium shielding on efficiency and near field predictions in order to develop a second prototype. The validity of the model is confirmed by experimental tests in small and operating signal regimes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A Combined Experimental-Numerical Investigation of the Thermal Efficiency of the Vessel in Domestic Induction Systems

  • Bonet-Sanchez, Belen
  • Cabeza-Gil, Iulen
  • Calvo, Begona
  • Grasa, Jorge
  • Franco, Carlos
  • Llorente, Sergio
  • Martinez, Miguel A.
New studies are emerging to reduce energy costs and become a more sustainable society. One of the processes where the greatest savings can be made is in cooking, due to its large-scale global use. In this vein, this study aims to analyse the influence of the vessel in the thermal efficiency at the cooking process. For that purpose, a numerical model of a cooking vessel was designed and validated with three different experimental heating tests. One of the key factors of the process is the contact between the vessel and the glass, therefore, two new approaches to model the thermal contact between the vessel and the cooktop were explored. Once the numerical models were calibrated, a full factorial analysis was performed to quantify the influence of the key parameters of the vessel in the heating process during cooking (thermal conductivity, specific heat, convection and radiation coefficients, and vessel concavity). Two of the most influential parameters in the heating process are the conductivity and the thermal contact between the vessel and the glass. Higher cooking efficiency can be achieved both with a low thermal conductivity vessel and with a high concavity, i.e., increasing the isolation between the vessel and the glass.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Domestic induction heating system with standard primary inductor for reduced-size and high distance cookware

  • Plumed, Emilio
  • Lope, Ignacio
  • Acero, Jesús
  • Burdío, José Miguel
In this work, a hybrid wireless power transfer system which combines induction heating (IH) and inductive power transfer (IPT) functionalities is proposed to improve the performance of a domestic induction heating application with small loads weakly coupled to distant inductors. Considering the basic single-inductor domestic IH application, the addition of a secondary inductor with series compensation capacitor directly attached to the small ferromagnetic cookware. This inductor allows to adapt the primary inductor to the load size, extending load distance while avoiding increased power losses and stress in electronic components. The extended distance can be used to implement the glassless induction concept, where the ceramic glass of typical cooktops is substituted by the kitchen surface itself. The design of the secondary coil is carried out by means of a combination of Finite Element simulations and electrical simulations. A design process including the housing of the resonant capacitors and the selection of the secondary winding number of turns and cabling is presented. As a result, a prototype is implemented and tested under working conditions up to 1500 W at several distances. Experimental results validate the electrical modelling and simulation. Moreover, thermal results confirm the feasibility of the proposal and validate the adopted strategies for the capacitor housing. IEEE
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Color changes in beef meat during pan cooking: kinetics, modeling and application to predict turn over time

  • Moya, Jara
  • Lorente-Bailo, Silvia
  • Ferrer-Mairal, Ana
  • Martínez, Miguel A.
  • Calvo, Begoña
  • Grasa, Jorge
  • Salvador, María L.
The kinetics of heat-induced color changes in beef meat was determined and implemented in a numerical model for doublesided pan cooking of steak. The CIELab color space was used to obtain the lightness (coordinate L∗ ) and the reddish tone (coordinate a∗ ) of the cooked meat. L∗ was the CIELab coordinate that contributed the most to the change in the absolute color. Two response surfaces were found to describe the evolution with time and temperature of both color coordinates, L∗ and a∗ . The model results were successfully verified with experimental data of the two coordinates along the thickness of the meat for three degrees of cooking. The Root-Mean-Squared Errors (RMSE) for coordinate L∗ were 5.17 (very rare), 2.02 (medium rare) and 3.83 (done), and for coordinate a∗ 1.44 (very rare), 1.26 (medium rare) and 0.89 (done). The applicability of the model for practical cooking purposes was illustrated by determining the optimum turn over time to achieve a similar color profile on both sides of the meat. The turn over time depended on the desired degrees of cooking, and were comprised between one-half and two-thirds of the final cooking time, increasing from very rare cooking degree to done cooking degree.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design of a perfect-tracking soft-landing controller for electromagnetic switching devices

  • Ramirez-Laboreo, Edgar
  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
Electromagnetic switching devices such as electromechanical relays and solenoid valves suffer from impacts and mechanical wear when they are activated using a constant-voltage policy. This paper presents a new control approach that aims at achieving soft landing in these devices, i.e., a movement without neither impacts nor bouncing. The hybrid nonlinear dynamics of the system is firstly described taking into account the limited range of motion that characterizes this class of devices. Then, the nonlinear expression of the control law is derived and a method to design a soft-landing reference trajectory is proposed. It is shown that, when certain conditions are met, the design methodology presented in the paper results in a controller that achieves perfect tracking of the reference trajectory and, hence, soft landing is accomplished. The theoretical analysis is validated by simulation using a dynamical model of a specific switching device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An audio-based iterative controller for soft landing of electromechanical relays

  • Serrano-Seco, Eloy
  • Ramírez-Laboreo, Edgar
  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
Electromechanical relays and contactors suffer from strong collisions at the end of the switching operations. This causes several undesirable phenomena, such as clicking, mechanical wear and contact bounce. Thus, there is great interest in mitigating these switching impacts while keeping the advantageous features of these devices. This paper proposes a complete control strategy for soft landing. The control structure includes three main components. The first one is a real-time flux-tracking feedback controller, which presents several advantages over voltage or current control. The second one is a feedforward controller, which computes the flux reference signal based on a proposed dynamical model and the desired position trajectory for the switching operations. Lastly, the third control component is a learning-type run-to-run adaptation law that iteratively adapts the model parameters based on an audio signal. It exploits the repetitive nature of these devices in order to circumvent modeling discrepancies due to unit-to-unit variability or small changes between operations. The effectiveness of the proposed control is demonstrated through various experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Asymmetrical Modulation Strategies for Partially Covered Inductors in Flexible Induction Heating Appliances

  • Guillen, P.
  • Sarnago, H.
  • Lucia, O.
  • Burdio, J.M.
Cost-effective multi-output resonant inverter topologies are a key enabling technology for the development of flexible surfaces for induction heating appliances. These topologies present several challenges when applied to a wide range of IH-loads simultaneously. In this paper, two asymmetrical modulations are proposed as an alternative solution to control output power. The proposed approach has been verified using an experimental prototype featuring 2 induction heating loads up to 3.6 kW with output power control in the whole operating range.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of the material composition SMD diodes on their environmental impact

  • Pina C.
  • Elduque D.
  • Gómez P.
  • Sarasa J.
  • Javierre C.
The influence of the material composition of surface-mount device (SMD) diodes on the environment has been analysed in this research. This impact assessment has been performed by means of an environmental impact calculation through a life cycle assessment (LCA), in which the EcoInvent dataset has been updated and customised, generating a more precise environmental impact analysis by considering the exact material composition provided by several suppliers of diodes and also recycling during the production stage. Considering the EcoInvent diode dataset as a reference, variations from nearly 1640% to only 8.5% of the environmental impact have been achieved. For example, the impact per 1 g of SMD diodes can change the global warming potential from 292 g CO2 eq up to 354 g CO2 eq, whereas for abiotic depletion, values can change from 9.9 × 10-7 up to 1.9 × 10-4 kg Sb eq. The presence of critical raw materials such as antimony, cobalt, or magnesium, together with precious metals as gold or silver, highly influences the environmental impact values obtained, demonstrating the considerable influence on the environmental impact of the material composition of the SMD diodes analysed. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Life cycle assessment of a plastic part injected with recycled Polypropylene: a comparison with alternative virgin materials

  • Galve, José Eduardo
  • Elduque, Daniel
  • Pina, Carmelo
  • Javierre, Carlos
Plastics recycling is becoming a common action to reduce our products and processes'' environmental impact, and it is of the utmost importance to introduce circular economy strategies. However, for most of the different types of thermoplastics, recycling is not currently its usual end of life due to the technical difficulties in the sorting and recycling processes. This paper presents the complete life cycle assessment of an industrial component made with three different thermoplastics; two virgin thermoplastics typically used for similar parts in the market as Polyamide 6 and Polypropylene, and an alternative source of 100% recycled Polypropylene. All life cycle stages are included in the study. After carrying out the life cycle inventory, calculations of the environmental impact of each life cycle steps have been performed with ReCiPe 2016 EndPoint (H/A) v1.03/World and with IPCC 2013 GWP 100a v1.03 methodologies, comparing all three materials under the same conditions. A sensibility assessment has also been performed, calculating a worst-case scenario of the recycled material, and considering higher material acquisition distances. This study shows that recycled Polypropylene contributes to reducing the overall environmental impact of the component life cycle by 29.8% under ReCiPe, and by 42.8% under Carbon Footprint when compared to virgin Polypropylene. For the worst-case scenario, these reductions in the environmental impact of the component life cycle are also significant: 23.2% and 36.4%, respectively, showing that the use of recycled polymers is a key approach to reduce the environmental impact of plastic components.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Equitable persistent coverage of non-convex environments with graph-based planning

  • Palacios-Gasós, J.M.
  • Tardioli, D.
  • Montijano, E.
  • Sagüés, C.
In this article, we tackle the problem of persistently covering a complex non-convex environment with a team of robots. We consider scenarios where the coverage quality of the environment deteriorates with time, requiring every point to be constantly revisited. As a first step, our solution finds a partition of the environment where the amount of work for each robot, weighted by the importance of each point, is equal. This is achieved using a power diagram and finding an equitable partition through a provably correct distributed control law on the power weights. Compared with other existing partitioning methods, our solution considers a continuous environment formulation with non-convex obstacles. In the second step, each robot computes a graph that gathers sweep-like paths and covers its entire partition. At each planning time, the coverage error at the graph vertices is assigned as weights of the corresponding edges. Then, our solution is capable of efficiently finding the optimal open coverage path through the graph with respect to the coverage error per distance traversed. Simulation and experimental results are presented to support our proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Induction Heating Adaptation of a Different-Sized Load with Matching Secondary Inductor to Achieve Uniform Heating and Enhance Vertical Displacement

  • Plumed, Emilio
  • Lope, Ignacio
  • Acero, Jesús
This article presents an inductively coupled heating application, that is, a combination of wireless power transfer and induction heating. The addition of a secondary inductor with a resonant capacitor directly beneath and attached to the ferromagnetic load allows us to improve induction heating adaptation of loads of different sizes to the primary inductor, enhancing power distribution and extending load distance while avoiding increased power losses and stress on electronic components. The extended distance can be used to implement the seamless induction concept, where the typical ceramic glass is substituted by the kitchen surface itself. Finite-element analysis simulations are carried out to determine the suitability of each possible design, and a scoring system is applied to determine the optimal solution, bearing in mind the delivered power, power factor, power distribution, and efficiency. A near optimal design is chosen to develop as a prototype. The prototype is tested under working conditions up to 3680 W at several distances, validating the simulations'' impedance parameters and verifying power distribution with a water boiling test and a dry test with a thermographic camera.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

High-frequency GaN-based induction heating versatile module for flexible cooking surfaces

  • Sarnago, H.
  • Burdio, J.M.
  • Lucia, O.
Induction heating is nowadays the leading heating technology due to its superior efficiency and performance. In recent years, flexible cooking surfaces have arisen as the preferred choice offering best-in-class user performance. However, there are significant technical and manufacturing challenges that must be addressed to obtain flexible and high-performance implementations. This paper proposes the use of modular induction heating cells taking advantage of GaN technology to provide a flexible implementation outperforming current state-of-the-art solutions. The proposed approach has been verified using an experimental prototype, proving the feasibility of the proposed system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Deep Learning-Based Model Predictive Control for Resonant Power Converters

  • Lucia, S.
  • Navarro, D.
  • Karg, B.
  • Sarnago, H.
  • Lucia, O.
Resonant power converters offer improved levels of efficiency and power density. In order to implement such systems, advanced control techniques are required to take the most of the power converter. In this context, model predictive control arises as a powerful tool that is able to consider nonlinearities and constraints, but it requires the solution of complex optimization problems or strong simplifying assumptions that hinder its application in real situations. Motivated by recent theoretical advances in the field of deep learning, this article proposes to learn, offline, the optimal control policy defined by a complex model predictive formulation using deep neural networks so that the online use of the learned controller requires only the evaluation of a neural network. The obtained learned controller can be executed very rapidly on embedded hardware. We show the potential of the presented approach on a hardware-in-the-loop setup of an field-programmable gate array-controlled resonant power converter.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design and optimization of a GaN-based high-voltage waveform generator for industrial and biomedical applications

  • Álvarez-Gariburo, I.
  • Sarnago, H.
  • Burdío, J.M.
  • Lucía, O.
Arbitrary waveform generators are required for multiple load characterization and excitation in a wide variety of industrial and biomedical applications. In the past, these generators have been typically limited in voltage/current/frequency due mainly to limitations of the power devices and topologies. However, advances in semiconductor technology have enabled the design of high-performance versatile waveform generators with improved operational ranges. This paper deals with the design, optimization and experimental validation of a 2000-V versatile large-signal high-frequency arbitrary waveform generator taking advantage of GaN devices switching at the MHz range. Several alternatives are studied, and the proposed system has been designed and implemented, proving the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electro-thermal modeling of irreversible electroporation and validation method of electric field distribution

  • López-Alonso, Borja
  • Sarnago, Héctor
  • Burdío, Jose Miguel
  • Lucía, Óscar
Nowadays, several applications of electroporation have been adopted in cancer therapy with promising results that have boosted research interest. To develop new treatment options, the development of electroporation models and measurement method in order to study the real distribution of the electric field potential are needed. Nowadays, current trends in electroporation techniques suggest the use of more powerful pulse generators that enables the treatment of larger tissue volumes. However, new challenges arise regarding the modeling of the electroporation process in large tissue volumes as well as the potential thermal effects when large amounts of energy are used. The aim of this paper is to propose a finite element analysis (FEA) based model using COMSOL of the irreversible electroporation process considering both electrical and thermal effects, and to validate it through in-vivo experimentation. Moreover, we propose a methodology for measuring the electrical potential in different points of a biological tissue during the application of a train of pulses to measure the distribution of the electric field inside the tissue. For this application, needle-based electrodes have been developed to achieve the least invasive measurement possible. These tools are aimed to improve the application of the electroporation treatment by reducing its side effects.